Related
Hello ppl,
I have upgrading my PDA2k to WM5 but now I'd like to downgrade to WM2003.
I followed the instructions by doing.
reset,
pressing record and camera,
make 2nd and 3rd option YES,
press messages,
setup the device,
doing a power+camera+reset
it went to Serial/USB screen.
I run the Maupgrade but when I click next to "check the device" it shows no versions, and when I click next it cannot upgrade.
when I click on reset and try to run the maupgrade while the operating system is running it shows the version that I want to install but when I click on next it cannot upgrade.
any ideas?
thanks.
MegaHz said:
Hello ppl,
I have upgrading my PDA2k to WM5 but now I'd like to downgrade to WM2003.
I followed the instructions by doing.
reset,
pressing record and camera,
make 2nd and 3rd option YES,
press messages,
setup the device,
doing a power+camera+reset
it went to Serial/USB screen.
I run the Maupgrade but when I click next to "check the device" it shows no versions, and when I click next it cannot upgrade.
when I click on reset and try to run the maupgrade while the operating system is running it shows the version that I want to install but when I click on next it cannot upgrade.
any ideas?
thanks.
Click to expand...
Click to collapse
Follow this:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
I did that step by step.
I told you what is the problem man, when it goes to the serial/usb screen it does not recognise the version
I am waiting for it to check a lot of time and then it shows that it cannot upgrade.
if I run Maupgrade while it is booted it shows the versions but cannot upgrade
MegaHz said:
I did that step by step.
I told you what is the problem man, when it goes to the serial/usb screen it does not recognise the version
I am waiting for it to check a lot of time and then it shows that it cannot upgrade.
if I run Maupgrade while it is booted it shows the versions but cannot upgrade
Click to expand...
Click to collapse
If you get the error the first time with MaUpgrade_Ut then without removing the BA from the cradle, run MaUpgrade_Ut again..
I tried that also.
nothing happens
any other idea?
MegaHz said:
I tried that also.
nothing happens
any other idea?
Click to expand...
Click to collapse
What Error are you getting.. No one will be able to help without knowing what the Error is..
I am getting Connection error.
MegaHz said:
I am getting Connection error.
Click to expand...
Click to collapse
Then you need to run MAUpgrade_Ut twice.. As seen in Wiki..
Wiki said:
However, if you are installing a rom on a device other than that which it is meant for, you will get a Device ID error, so follow these steps:
First Method (Quick/Easy) (TYPE II)
Download update to desktop
Unrar or unzip all files in exe or rar into a new folder
Open the folder with the extracted files
Download this file: MaUpgradeUt_noID.ZIP
Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
Run this new exe file instead of BaUpgradeUt.exe to update your rom
If you get an error the first time, run MaUpgradeUt_noID.exe again without touching your device (don't take it out from the cradle, don't reset it, don't touch it at all!)
Click to expand...
Click to collapse
Cheers!
I run it more than 10 times.
MegaHz said:
I run it more than 10 times.
Click to expand...
Click to collapse
Then I'm sorry but I can't help any more.. Can you take a screen shot of the error message on your PC Screen so I can see what it says..?
MegaHz said:
I run the Maupgrade but ....
Click to expand...
Click to collapse
Maupgrade? I was using BaUpgrade or MaUpgrade_noid
MegaHz said:
I tried that also.
nothing happens
any other idea?
Click to expand...
Click to collapse
I've got the same problem.
Try this:
Remove PDA form craddle
Uninstall ActivSync 4.x
reboot PC
Remove [or rename] directory C:\Program Files\Microsoft ActiveSync
Remove [or rename] directory C:\Documents and Settings\UserName\ApplicationData\Microsoft\ActiveSync
Install ActiveSync 3.x [you can find this version on your original CD]
reboot PC
Don't synchronize, don't pair [!!!]
Kill winword.exe, outlook.exe etc
Don't kill rapimgr, wcescomm, etc
Start bootloader [power+record+reset]
put PDA into the craddle [now should display "USB" instead of "Serial"]
start MaUpgrade_noID or BaUpgrade [probably it wil not recognize software versions, but don't worry]
Good luck
give feedback if it's working, pls
i run the procedure exactly as you instruct me.
and at the point where it starts upgrading it finishes after 2 seconds with message: Successful upgrade.
Do you have NBF files in the directory, where BaUpgrade or MaUpgrade_noID is dtored? For example - nk.nbf
It looks, that BaUpgrad [or MaUpgrade_noID] can connect now and is ready to downgrade, but there is nothing to downgrade.
yes I have the files.
let me explain again the problem.
with activesync 3.0 it happens the above problem
and at the point where it starts upgrading it finishes after 2 seconds with message: Successful upgrade.
Click to expand...
Click to collapse
with activesync 3.8 it does not even connect
or maupgrade stays and checks for versions forever.
re leventes,
anybody has any idea?
These all files need to downgrade from WM5 to 2003 SE on BA.
Put all these files into one folder.
1. MaUpgradeUt_noID.exe
2. RUU.conf
3. RUU.dll
4. nk.nbf <---------- The most important file, because this file is ROM. When you run MaUpgrade, it will search what ROM do you have. In you're case maybe you don't have this file. That's why there's nothing show in version ROM....
baniaczek said:
MegaHz said:
I run the Maupgrade but ....
Click to expand...
Click to collapse
Maupgrade? I was using BaUpgrade or MaUpgrade_noid
Click to expand...
Click to collapse
Again: Maupgrade? I was using BaUpgrade or MaUpgrade_noid
all those files are in place
and I am using MaUpgradeUt_noID.exe
any other ideas?
MegaHz said:
all those files are in place
and I am using MaUpgradeUt_noID.exe
any other ideas?
Click to expand...
Click to collapse
Nothing more. Sorry.
I saw this problem while downgrage my IIs and I did the following:
First you need: MS ActiveSync 4.1 installed on your Desktop PC (If yes, the first time you see "Connection error" you need to restart you destop PC before downgrage). Connect your device let ActiveSync conected and..
1. Press Power + Soft Reset button
2. Fast press both Camera + Record at the same time before
3. The Record button to move down and the Camera button to change status. You should set 2nd & 3rd option to Yes ( It's boot with format Registry & Storage on your PPC). You will see the white screen for a few minute and next the color stripe. It means you device is booting
4. Press all Power + Soft Reset + Record + Camera at a time( It's not easy . The screen will display Serial & version ready to up/downgrage
5. Run MaUpgrageNo_ID (should put in the same folder with nk.nbf, ms_.nbf &...) This tool will skip some error for up/downgrage, you may try more time if first time see error.
I did that and succeeded but can anyone tell me why my device can't receive Delivery Report? I'm sure that my current ROM version have it (I used this for a time). Please help me!
Hi all!
I have in the jeyo mobile a problem who a dont know how to resolve...
My device is contected by usb, and when i open the program they dont connect, appears an error likes 'Please start CommMan on device manual'
How to resolv that problem? :S
I have one qteks200!
You got a good advise! Just do it - start CommMan manually (by clicking the left soft-key on a device for example)
Than the Companion starts.... Or download 1.1 build 838. As far as I remember - the problem was solved in the last official build.
I can not tell more - I use JMC 2.0 at the moment - that version leaked about a year ago through the official forum.
Hummm.. i have resolved that problem... but not on that way... on setup folder on pc, exists and app named CommMan.exe, is necessary copy yhat file to device and run it... Now is 100% perfect able to run jeyo mobile 1.1!
Thnkx in the same!
P4k1t0 said:
Hummm.. i have resolved that problem... but not on that way... on setup folder on pc, exists and app named CommMan.exe, is necessary copy yhat file to device and run it... Now is 100% perfect able to run jeyo mobile 1.1!
Thnkx in the same!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1338222&postcount=2
Bram87 said:
http://forum.xda-developers.com/showpost.php?p=1338222&postcount=2
Click to expand...
Click to collapse
Hummm... i have do that but they dont SR with pc automatically
Hi,
My S620 is stuck at the startup screen showing just the htc logo and won't go any further. Anyone know how I can fix this?
Try to remove the battery, the SIM card and the memory card. Just insert the battery and try again. This worked for me.
It does not work:-( Anyone know how to put directly into bootloader mode?
Or anyone has any other tip?
bump anyone have an idea why mine stopps at the htc screen at start up?
Hard reset?
Did you tried hard-reset? You need at least one previous sync sesion, or you will loose everything stored on the device.
I tried that. Not working;-(
It does not react at keyboard pressure at all;-(
surfer said:
Hi,
My S620 is stuck at the startup screen showing just the htc logo and won't go any further. Anyone know how I can fix this?
Click to expand...
Click to collapse
which rom did you use and have you unlocked it with Imeicheck ?
jhwo99 said:
which rom did you use and have you unlocked it with Imeicheck ?
Click to expand...
Click to collapse
The WM6 rom and it was unlocked through imeicheck. Any ideas?
surfer said:
The WM6 rom and it was unlocked through imeicheck. Any ideas?
Click to expand...
Click to collapse
I had a similar problem and Imeicheck helped me out.
"Plan B" worked for me.
I hope this will help you.
A) flashing ANY new ROM as CROSS-MODEL-ID update
B) Fix the "Data crashes"
In case you have problems please indicate the step letter/number which is not clear / not working for you.
Just do EVERYTHING EXCAT STEP BY STEP and everything will work.
---------
A)
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when asked for KEY-FILE or COMM ERROR#1 comes up WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) unpack the "RUU_Excalibur_TMO_US_1.20.531.1_4.1.13.34_02.79.90_Test.exe"
(right click on the .exe and select "Winzip->Unzip to folder..."
9) in the extracted folder you will find a file called like "RUU_signed.nbh" (.NBH), open it with HEX EDITOR (e.g. HexWorkshop) and locate the string like "EXCA20000" near the beginning of the file. Change it to "EXCA****" (all without the quotes, overwrite the DIGITS with STARS)
10) in the extracted folder you will find a file called like "RUU_Update.exe", open it with HEX EDITOR and SEARCH the string "BsaD5SeoA" and OVERWRITE it with "IMEICHECK" (all without the quotes)
11) start the just edited RUU_Update.exe now and make the ROM update (screen of phone will stay white ALL THE TIME, THIS IS NORMAL)
12) wait till update is complete and phone will start with the new ROM
13) To fix the "Data Crashes" problem just make a COMPLETE run of the unlocker (see B) ) and you are done.
---------
B) To fix the "Data crashes" you only have to make a COMPLETE run of the unlocker.
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when you get COMM ERROR #1 WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) start unlocker again and now it will complete the unlock
9) at next start the "Data Crashes" will be away.
surfer said:
The WM6 rom and it was unlocked through imeicheck. Any ideas?
Click to expand...
Click to collapse
Is your problem solved ?
jhwo99 said:
Is your problem solved ?
Click to expand...
Click to collapse
I can acess the bootloader now. So all i've to do is to find an official WM5 rom to try and flash back again. Any ideas?
surfer said:
I can acess the bootloader now. So all i've to do is to find an official WM5 rom to try and flash back again. Any ideas?
Click to expand...
Click to collapse
You van find the WM5 rom in this forum, but i suggest to install the Russian HTC rom. This works great (for me).
I work with all the options in the telephone, the whole day. Without any problems !
s 621 stuck on wm6
hello
Need Help pls! my new htc dash has stucked on the wm6 logo, active sync does not recognize the phone . it happened after ive installed on phone language extender
could any1 help pls...?
thnks
Ok this is what you do, hold down the camera button located to the right of the space bar for like 10 seconds, then while still holding it own plug the USB in and you should see the menu come up with three colors. This is where you load your original ROM and if its T Mobile you can get the rom from the website.
s 621 stuck on wm6
thank you very much for ur reply. i got the 3 color on screen. pls advise meaning of "flash..." pls note im not a t mobile member
thank u so much for helping
Oh ok I can get that rom for you, well flash means to install. Let me ask you one quick thing is your phone tmobile branded. Like does it have the tmobile logo on it or not.
s 621 stuck on wm6
nop
the phone aint branded
i actually got wm6 and when i try to install it the black window says there s no device connected..
Um... Well use this file to reflash it okay. Make sure that the tri-colored screen is on when you try to install the rom (reflash means install ok)
http://rapidshare.com/files/7886560...S_1.33.422.1_4.1.13.51_03.07.90_Ship.exe.html
Hi
I have an ASUS P526 and I had a problem of not being able to turn the PHONE function on.
The Communicaton Manager did not have the option to turn on the phone,
and I could not establish a USB connection to my PC via ActiveSync : It said "Cannot open UFN drivers"
I was using Windows Mobile 6.0
So I decided to flash the OS ROM. I downloaded SCHIST ROM v21864_clean and flashed the OS with the flash.dio.nb0 included in the download.
(i.e. I did not extract any flash.dio.nb0 files from my own ROM)
Now, when I turn on the phone, I get the Windows Mobile 6.5 SCHIST ROM 21864 clean screen and cannot log on to windows.
This is probably because I tried to flash an ASUS P526 with ASUS P527 ROM, but I could not find any other ROM to flash with.
When I download the original P526 ROM from the ASUS Website
(e.g. V618_WWE_Turkey_EXT_V158 ), I get a P526.pim file, but PIMSPLIT.EXE does not extract any " *.nb0 " files when I drag P526.pim onto it..
I am totally confused as to what to do at this point..
Please help!
I just want to be able to use Windows Mobile 6.0 , 6.1 or 6.5 with the phone, and be able to use the phone function, as well...
PS: The only way for me to flash the ROM on the phone, is with the SD card method, because ActiveSync does not work.
Hi
Tell me one thing, if you make a Softreset and click the OK button on the left will be in bootloader?
If so something can be done without sd.
The procedure is done using a ROM file.nbo, but first you must unlock the phone ...
Let me know and we'll see
Excuse my English
What do you mean Active Sync does not work? Is it a mechanical problem or a program incompatibility?
Try this: this is Expert mode in installing the Turkey ROM (or any other language).
Warning: Do this at your own risk! If not done right you might brick your phone! I will not be responsible for any damage done to your phone.
1.Make sure battery is fully charged.
2. connect your devide to PC using USB cable.
3. Run the ROM upgrade program you downloaded from ASUS site,
4. On the top bar of the installation window, "right click". A window will appear with the option "Expert Mode". Click on that. A message will appear in the window about connect USB or something (I'm sorry but I cannot remember the exact message since I have not done this in a long time).
5. Now you have to go to bootloader mode in your P526. Do this by pressing and HOLDING on the OK button <rocker switch on the left side> then press reset button <continue hoding down the rocker switch>. Your unit should go to the blue ASUS screen and a message will appear about being in USB mode or cable something <again I'm sorry I cannot remember exact message>.
6. If this appears then press the <Update> button on the installer window. This should start the installation proces.
Hope this helps. if you have any other questions or if this does not work please feel free to post again.
thanks for your good information
regards
ferdiebaq said:
What do you mean Active Sync does not work? Is it a mechanical problem or a program incompatibility?
Try this: this is Expert mode in installing the Turkey ROM (or any other language).
Warning: Do this at your own risk! If not done right you might brick your phone! I will not be responsible for any damage done to your phone.
1.Make sure battery is fully charged.
2. connect your devide to PC using USB cable.
3. Run the ROM upgrade program you downloaded from ASUS site,
4. On the top bar of the installation window, "right click". A window will appear with the option "Expert Mode". Click on that. A message will appear in the window about connect USB or something (I'm sorry but I cannot remember the exact message since I have not done this in a long time).
5. Now you have to go to bootloader mode in your P526. Do this by pressing and HOLDING on the OK button <rocker switch on the left side> then press reset button <continue hoding down the rocker switch>. Your unit should go to the blue ASUS screen and a message will appear about being in USB mode or cable something <again I'm sorry I cannot remember exact message>.
6. If this appears then press the <Update> button on the installer window. This should start the installation proces.
Hope this helps. if you have any other questions or if this does not work please feel free to post again.
Click to expand...
Click to collapse
my phone fails to complete the upgrade and did not able to boot. I tried to do a hard reset, but the same thing.. please help
Dear All,
i installed wrong rom to acer smartphone E101 and its dont work now , its open and show acer logo then restart ...... i tri install correct rom using SD card but the install screen don't appear.
iknow the proceduer to reset or clean boot or install new rom but its dont work too
please help me to solve this problem >>>>>>>
urgent help
please any help
up>>>>>>>>>>>>>>>
ask hdubli
put it in download mode and try the flasher
Sent from my E400 using the XDA mobile application powered by Tapatalk
what is " download mode" ?
NEED HELP WITH hp iPAQ hx2410
i have " HP IPAQ hx2410 " with WM2003 CE 1.10.0 and i upgraded with this window 5.2 it upgraded successfully but i m stuck on the first loading screen. its stuck when loading complete i have tried every thing such as boot-loader thing and also cant downgrade it . . . so kindly plzzz any one tell me how can i go to my initial state on wm2003 ASAP.
[email protected]
same problem here ? the acer logo starts ..
after that the red LED starts blinking ...
no boot-loader
no hard rest
i tried everything..
please anyone can help us ?
My Device: Acer betouch E101
DJ-XMS
www.acer-club.ru/Vosstanovlenie-telefona-posle-neudachnoj-proshivki-t572.html
DJ-XMS said:
same problem here ? the acer logo starts ..
after that the red LED starts blinking ...
no boot-loader
no hard rest
i tried everything..
please anyone can help us ?
My Device: Acer betouch E101
Click to expand...
Click to collapse
I just had the same symptoms with my e100. and i found out that u can force it to boot by pressing volume up + camera with the silence button up. As soon as the version of your ROM appears on the screen (should b about 3~4 sec) release both button to start windows, release volume up to go clean boot, or release the camera button to go flah ROM (in case u want to flash a new ROM from the sd card - must b 256/512mb formated in fat16).
The Problem can be solved just follow the instructions :
1- Press the camera and the restart button with the sound switcher down (silent mode)
2- Your device will boot to the download mode.
3- download the original rom from global-download.acer.com/GDFiles/OS/OS/OS_Acer_2.003.04.EN_WM65_A.zip?acerid=634013918060286729&Step1=Smart%20Handheld&Step2=beTouch%20Series&Step3=E101&OS=M02&LC=en&BC=Acer&SC=EMEA_1
4- unrar the rom and press setup during the setup it will tell that active sync is not connected , ignore the window and go to program files(86x)\EUU you will find a folder called imageupdater copy the folder to use it later.
5- download this tool .mediafire.com/?ubilx69aawdbrnu
6- unrar the downloaded files move imageupdater in (4-) to the same folder
7- Run DownloadForm_2005 ( for win 7 right click run as administrator)
8- Have fun .
hi sir
my acer e101
i ddnt get my bootscreen.....
have any solution plz help me
no sir
in acer it not gatting download
This Link Not Working.
louis0 said:
The Problem can be solved just follow the instructions :
1- Press the camera and the restart button with the sound switcher down (silent mode)
2- Your device will boot to the download mode.
3- download the original rom from global-download.acer.com/GDFiles/OS/OS/OS_Acer_2.003.04.EN_WM65_A.zip?acerid=634013918060286729&Step1=Smart%20Handheld&Step2=beTouch%20Series&Step3=E101&OS=M02&LC=en&BC=Acer&SC=EMEA_1
4- unrar the rom and press setup during the setup it will tell that active sync is not connected , ignore the window and go to program files(86x)\EUU you will find a folder called imageupdater copy the folder to use it later.
5- download this tool .mediafire.com/?ubilx69aawdbrnu
6- unrar the downloaded files move imageupdater in (4-) to the same folder
7- Run DownloadForm_2005 ( for win 7 right click run as administrator)
8- Have fun .
Click to expand...
Click to collapse
PlayGhost2 said:
I just had the same symptoms with my e100. and i found out that u can force it to boot by pressing volume up + camera with the silence button up. As soon as the version of your ROM appears on the screen (should b about 3~4 sec) release both button to start windows, release volume up to go clean boot, or release the camera button to go flah ROM (in case u want to flash a new ROM from the sd card - must b 256/512mb formated in fat16).
Click to expand...
Click to collapse
it worked !!
THankS !!