On my p3300, all I had to do was tap the "G" and it would give me an option to disconnect my internet connection (this is while using it on my call plan).
Now when I try to do that on the new phone, it only brings up the Notifications page
Press and hold the end call key for 3 to 4 seconds and a menu appers. press terminate data connection to disconnect.
That only locks the phone.
The phone is in stock form - not even installed any programs yet.
Longhair said:
That only locks the phone.
The phone is in stock form - not even installed any programs yet.
Click to expand...
Click to collapse
Go to 'All Settings' > 'Personal' > 'Buttons' > 'End Key'
Either change the setting to 'Always display the Quick List', or 'Terminate data connection'.
Many thanks
I actually had to break out the manual but that was no help at all.
Related
Hello, everyone;
I've got a TP2 on WinMo 6.5 Pro, and would like to modify it a wee bit to do the following.
First, the signal lost, call dropped window that pops up. I'm an over the road truck driver, and this happens alot in the mountains. Is there any way to disable this silly message?
Second, the backlight always comes on whenever it looses/regains a signal. This is an extreme annoyance, bordering on dangerous, situation when driving at night and I am constantly distracted by the sudden glow from the screen. Can this be disabled?
Finally, emails. Is there a setting that will force the entire email to download, doing away with the tap-here-to-download-entire-message thing?
Much appreciated, everyone, and best wishes for a great day!
Fred
Not sure on 1 or 2, sorry. For 3:
-Launch the inbox (Microsoft version, not Sense). Scroll to Email tab and tap Inbox
-Menu --> Tools --> Options
-Tap on the account
-Tap on "Download Size Settings"
-Message download limit dropdown --> Entire Message
-Download Attachments dropdown --> All attachments
Edit: Not really a solution for the second issue, but if you turn on the "Automatically adjust backlight" feature it won't be quite so bright when it does turn on. Start --> Settings --> System --> Power. Check "Automatically adjust backlight".
Perfect! Issue 3 solved. Thanks, bud.
Anyone for the other two?
entire message
From the inbox of an email account - tap the soft button to the right of the keyboard one (menu?). tap on tools then options - tap on the account you wish to modify. You should see an option for Download Size Settings - select "entire message from the bottom drop down menu then click done.
If you are going through an Exchange Server then run the Activesync app on the phone. Click menu then options. Hightlight "email" then tap on settings. Change the download size limit to "entire message" and ok your way out.
I can't help with the other issues as I am new to this phone too.
Ok. Someone beat me to it.
No worries, mate, thanks for chiming in. You did illuminate another method, and thankfully you two have solved one annoying issue. The others will require entering the registery, I'm sure.
Thanks!
IH8Q8 said:
Hello, everyone;
I've got a TP2 on WinMo 6.5 Pro, and would like to modify it a wee bit to do the following.
First, the signal lost, call dropped window that pops up. I'm an over the road truck driver, and this happens alot in the mountains. Is there any way to disable this silly message?
Second, the backlight always comes on whenever it looses/regains a signal. This is an extreme annoyance, bordering on dangerous, situation when driving at night and I am constantly distracted by the sudden glow from the screen. Can this be disabled?
Finally, emails. Is there a setting that will force the entire email to download, doing away with the tap-here-to-download-entire-message thing?
Much appreciated, everyone, and best wishes for a great day!
Fred
Click to expand...
Click to collapse
On the Email Issue, go to the inbox, tap and hold to bring up the context menu, select Tools / Options, and you can modify the download settings.
settings\sounds and notifications\ notifications tab... in there you can change what different 'events' do.
If there is a setting in your phone for what you want it will be in there.. if not It's likely a registry change you need to do. That I cant help you with as I wouldn't know what you need to change specifically.
Hi,
I have a Bluetooth device on my car and I enjoy playing my music on my mobile (Desire HD ofc) through the car's speakers, and of course making calls and thou.
But every time I turn on the car and then the car-device search and connect to my mobile (automatically! woho) and I configured the mobile to run the "Car-Home" Aplication automaticly when the device is connected,
So then of course I want to put music (through "PowerAMP" - player witch I added icon to the list) So I need to press on the icon of the poweramp and then it opens it and I need to click play and then return to the home-car.
Too many clicks just to make music run.
Is there any way to make my life easier then it already does?
Like making the power amp press play automaticly when Bluetooth headset is connected?
or configuring the car-home to do it, it self..?
Thank you,
Yarden.
any one?
You might be able to do that with an app called 'tasker'. You can find it in the market (it's a paid app btw).
Here's an informative article about it;
h**p://lifehacker.com/5599116/how-to-turn-your-android-phone-into-a-fully+automated-superphone
seems like a very fine app,
But I can't make my command to work.
Do you know how to use this software and explain me please?
I only want to play music (my playlist is already on), when the car home app is turned on (it will pop on automatically when I'm in car driving).
mcjordan92 said:
seems like a very fine app,
But I can't make my command to work.
Do you know how to use this software and explain me please?
I only want to play music (my playlist is already on), when the car home app is turned on (it will pop on automatically when I'm in car driving).
Click to expand...
Click to collapse
I made it work with the default music app. To set up the profile follow these steps;
1. Select NEW and name your profile
2. Select 'application' in the context menu
3. Select 'car panel' and click DONE
4. Select 'New task +' in the task selection box
5. Name your task
6. Click + sign > select 'audio' > select 'media volume' > move 'level' slider to desired volume > select DONE
7. Againg Click + sign > select 'app' > select 'load app' > select 'Music' > select DONE (you could also select PowerAMP here but I didn't test this)
8. Again click + sign > select 'Media' > select 'Media control' > select 'Toggle Pause' in the 'cmd' droplist > select DONE (simulate media button has to be checked)
9. In 'task edit' window click DONE
10. Make sure your profile is loaded; green V next to profile (uppper right corner) and green ON in the bottom right corner
11. enjoy your tasker profile!
Optional
12. Hit the thanks button under my post
your an angel from sky
god damn what a great explanation.
I did it all thank you very much,
I'll test it tomorrow in my car (its 3:24 am here now )
mcjordan92 said:
your an angel from sky
god damn what a great explanation.
I did it all thank you very much,
I'll test it tomorrow in my car (its 3:24 am here now )
Click to expand...
Click to collapse
You're welcome, let me know if it worked
I'm currently out of my coverage area so the "searching for available network?" alert keeps popping up every 10-30 seconds. This is driving me craxy, I've tried disabling all alerts and even enabling airplane mode. I can't seem to find anyone with this problem, so I'm assuming I'm just missing a simple solution. I'm currently rooted with stock rom on 4.1.2.
If there is no way to disable this pop up, is there some way I can at least make it think there is signal so it stops popping up? The alert has increased to every second. I can't even manage to type 2 words before the pop up blocks the screen and disables the keyboard.
That sounds annoying! Try this..
-Go to phone dialer and dial #*#*4636*#*#
-Select "Device Information"
-Scroll down and press the button "Turn off Radio"
Does that do the trick?
lmike6453 said:
That sounds annoying! Try this..
-Go to phone dialer and dial #*#*4636*#*#
-Select "Device Information"
-Scroll down and press the button "Turn off Radio"
Does that do the trick?
Click to expand...
Click to collapse
When I dial that I just get a pop up that says "emergency calls only"
Saiyan26 said:
When I dial that I just get a pop up that says "emergency calls only"
Click to expand...
Click to collapse
It was just a lil off that's why you didn't get the menu. But he was right! It's input this way *#*#4636#*#*
Most codes start with the star* first.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Bajanman said:
It was just a lil off that's why you didn't get the menu. But he was right! It's input this way *#*#4636#*#*
Most codes start with the star* first.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
Thanks that works, but turning off the radio doesn't disable the pop up. I just connected to Rogers (I'm in CAN atm) and disabled roaming. So there's no pop ups while I'm their coverage. I still can't believe there's no way to disable that pop up.
Remove the Sim card! this will fix the problem
Saiyan26 said:
I'm currently out of my coverage area so the "searching for available network?" alert keeps popping up every 10-30 seconds. This is driving me craxy, I've tried disabling all alerts and even enabling airplane mode. I can't seem to find anyone with this problem, so I'm assuming I'm just missing a simple solution. I'm currently rooted with stock rom on 4.1.2.
Click to expand...
Click to collapse
Simply remove the Sim card! This will fix the problem. When there is no sim card, the phone will not search for network, hence you will not get this error.
I simply removed the sim card, rebooted the phone, and tada, when I am flying on airplanes, and ofcourse there is not network coverage there, I can finally use the phone for games, music, etc, without this annoying message poping up every 30 seconds or so.
I have this EXACT same problem. I first noticed it after I turned on WiFi calling. This is not a mild annoyance. It's happening so often that it's rendering my phone nearly unusable. If anybody has any ideas I'd love to hear them. It also only started happening after I updated to Android 9.
I hated this so much on the S10, because it would interrupt games, apps, everything (and my network coverage sometimes flipped from 1 bar to 0, so I was seeing this 20-30 times a minute) but I found a solution that has worked for me so far (I've definitely seen my network transition to Emergency calls only without popping this up). Fair warning, I don't know what other consequences this had, but basically, I went to Settings -> Apps -> triple dot menu -> Special access -> Appear on top -> Show system apps -> (then I went through a bunch of apps that I thought could be the culprit, and turned them off. That included the phone apps). I've tested to make sure that if someone calls me I still get notifications (audio if phone volume isn't vibrate/mute, and full screen popup if I'm in another app). For completeness, I also went through the system apps in Settings-> Apps and turned all their notifications to silent and minimized, but as far as I can tell, that didn't help. I haven't gone back and turned stuff back on, because I never want to have this happen again.
When you will go to setup wifi/when you will turn on it,
You can find the Wi-Fi Timer by going to Settings, by hitting the Wi-Fi menu option under the Connections tab, By pressing the Menu soft key on your Galaxy S4 and hitting Advanced.It is very simple way. Yep, this is a extremely well-hidden offer. Then you set the hours you want the Wi-Fi timer to switch on Wi-Fi. Thanks
I just downloaded tasker. It seems like an amazing application but for the life of me, I can't figure out how to use it. Here are the tasks that I would like to program:
1) Set Wifi On when I am at home using cell towers
2) Set Wifi Off when I leave home
3) Change volume level to vibrate when I plug it in to the charger and allow emergency calls from certain phone numbers (I read you can do this)
4) Set volume level to highest setting when the phone is unplugged
5) Launch Pandora when my phone is connected to bluetooth
If someone could post step by step instructions that would be great. My hope is once I learn to do these, I can figure out how to program other tasks. Thanks.
ILowry282 said:
I just downloaded tasker. It seems like an amazing application but for the life of me, I can't figure out how to use it. Here are the tasks that I would like to program:
1) Set Wifi On when I am at home using cell towers
2) Set Wifi Off when I leave home
3) Change volume level to vibrate when I plug it in to the charger and allow emergency calls from certain phone numbers (I read you can do this)
4) Set volume level to highest setting when the phone is unplugged
5) Launch Pandora when my phone is connected to bluetooth
If someone could post step by step instructions that would be great. My hope is once I learn to do these, I can figure out how to program other tasks. Thanks.
Click to expand...
Click to collapse
1+2) New Profile "Home" State->Phone->Cell Near - Under Cell Tower press scan and walk around the house to register a few cell towers.
Go to tasks and create new task "Enter Home" - New - Wifi - On
Repeat with a task "Exit Home" - New - Wifi - Off
Go to profiles long press "Home" select Enter Home as entry task and Exit Home as exit task.
Same logic for the others
stathis95194 said:
1+2) New Profile "Home" State->Phone->Cell Near - Under Cell Tower press scan and walk around the house to register a few cell towers.
Go to tasks and create new task "Enter Home" - New - Wifi - On
Repeat with a task "Exit Home" - New - Wifi - Off
Go to profiles long press "Home" select Enter Home as entry task and Exit Home as exit task.
Same logic for the others
Click to expand...
Click to collapse
I can't get the silent mode one to work. It seems pretty simple so I don't know what I'm doing wrong. This is what I'm doing
Create Profile - State-Power-AC
Create Task-Audio- Silent Mode On- Set as Enter Task
Create Task-Audio-Silent Mode Off- Set as Exit Task
Doesn't work.
ILowry282 said:
I can't get the silent mode one to work. It seems pretty simple so I don't know what I'm doing wrong. This is what I'm doing
Create Profile - State-Power-AC
Create Task-Audio- Silent Mode On- Set as Enter Task
Create Task-Audio-Silent Mode Off- Set as Exit Task
Doesn't work.
Click to expand...
Click to collapse
It should work. Are you plugging it on AC or USB? Does the profile activate? (is it green?)
stathis95194 said:
It should work. Are you plugging it on AC or USB? Does the profile activate? (is it green?)
Click to expand...
Click to collapse
I'm plugging it into the wall. Here is a screenshot of my profile screen
ILowry282 said:
I'm plugging it into the wall. Here is a screenshot of my profile screen
Click to expand...
Click to collapse
Wow! I'm an idiot. I had tasked disabled. Haha! How do I create an exception for the silent mode task to have certain numbers get through?
ILowry282 said:
Wow! I'm an idiot. I had tasked disabled. Haha! How do I create an exception for the silent mode task to have certain numbers get through?
Click to expand...
Click to collapse
Have a look here:
http://tasker.wikidot.com/sleepmode
Tasker has unlimited capabilities. I find myself learning something new about tasker every single day
stathis95194 said:
Tasker has unlimited capabilities. I find myself learning something new about tasker every single day
Click to expand...
Click to collapse
Ditto! I also find myself completely baffled by it every day, despite having used it for years and being a programmer. The more complicated stuff you try to do, the more you'll be both amazed and confounded by the capabilities