Develop Bugs

For All Those Who Stuck In The Boot Screen - Try Mamaich Method !!!

Before 1 month my UNIVERSAL stuck on boot screen and like every one I'll start to test everything - including TASK 28 command to return him back but without succsess. Before 2 days some one put a thread about formating DOC and I remembered that I was try to format my DOC and after few weeks my Universal was stuck so MAMAICH wrote this:
mamaich said:
if you can enter bootloader - use "task 28 55aa", this would restore DOC to its original layout.
If you cannot - contact service center.
Click to expand...
Click to collapse
After this .... gues what .... EVERYTHIG run back to normal again
I will repeat myself:
MAMAICH
IF SOME ONE SAY THAT YOU'RE NOT A GOD - HI LIES !!!
AFTER THIS EVERYTHING IS RUNING OK ON MY OLD UNIVERSAL!!!
Thank you very very very MUCH !!!
Thank you again !!!
Hope this work to most of you

Oh My God !!!!! My Jasjar Recovered !!!!!!!
Thanks Alot !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

where is this task28 55aa? cus im in the bootloader screen but i cant get anything else to work

Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .

i can only choose from COM1, COM2, and COM3, it doesnt find usb, and ive try reconnecting in

i find you must kill the wcescomm, wcesmgr and rapimgr exe's using task manager before you get the 'usb' option in mtty (kills activesync)

rite got a window come up in the progam
typed "task 28 55aa"
next line came as "USB>"
so is that it done? cus i aint seen anything else happen?

afaik, thats it
now reset back into the bootloader again and load a (whole, inc radio) ROM

stupid question here, but the update i installed earlier effed it up, so where can i get one that def works, and how do i install it on lol, im think

If you want to make sure it works i suggest getting the latest rom from your carrier (orange? - http://www1.orange.co.uk/business/download/m5000/M5000ruu.exe)
then you can upgrade (if you want to) to other, perhaps custom roms and a later radio ROM.

i got o2 rom im trying to install but it says it can only do it thru activesync, but that wont find my xda, any ideas how to bypass that?

thats because you killed activesync in the last process, start it again (from the start menu) and the upgrade should work

restarted my laptop and still activesync wont reckonise my xda, any other ideas? (its still boot loader mode, if i do a normal reset the screen just loads red and scrambled)

start the update process while in bootloader mode, you don't need activesync at all.

yeh i got the rom to install on it, went to soft restart it like it said, press 0 to conitinue, and wat a suprise a red, green and blue scrambled fuzzy screen, any ideas where to go now?

have you installed the rom yet? if not you need to reset it into bootloader mode (http://wiki.xda-developers.com/index.php?pagename=Universal_Resets) and then start the rom upgrade.

yeh i reset it in bootloader mode, and i installed the new rom from the o2 website, but it didnt work, so i need a rom that either puts it back to original 02 settings or rom that at least allows me to get a workin screen up again

what was wrong with the o2 one you had?

i went to sell my phone, so i wanted to clear the data permanently, but i thought id put an update on it to add to its features aswell, but the update effed it up big style, and now i cant sell a broken phone

someone add to wiki.

My FSC-n560 is bricked. Help please!

Hi!
I was using Newplow's WM6 038 ROM with my N560.
Yesterday I tried to write another ROM(WM6 038 with 8MB pagepool) but during update got an error.. It said it just failed.
Now my N560 is stuck on booting screen(people climbing mountain..)
I tried Warm, Cold, Hard reset but with no luck.
Even the power button doesn't work so I had to remove battery. When I insert battery it powers on by itself.
I can enter bootloader screen by pushing power+record button so I tried to copy rom image file to SD card but it doesn't work.
I tried two ROMs(OS_213U.nbf from Original WM5 ROM and Newplow's) and 3 SD Cards(2GB SD, 1GB MicroSD with Adopter, 16GB SDHC)
Is there any recovery tutorial in bootloader mode?
Help me please!
Sorry for my English.

Have you tried flashing a ROM through the computer rather than the memory card? Try going into bootloader and flashing that way rather than the card.

The pagepool ROM is meant for N560s that have been upgraded to 128Mb RAM... have you upgraded the internal RAM to 128Mb? If you have not, then this may have caused your problem.
I had this problem when flashing to 038 normal RAM (from 035). A hard reset reset to the normal start screen, but nothing worked. However, trying a new burn with the Loox flash tool restarted the process and it worked. I found the cure was to make sure you hard reset the N560 before doing a burn. It appears to be that you have to do this to release enough RAM for the burn program to reside and for "working" storage. You may not have done this.
I suggest you try simply re-running the flashtool with SD/SDHC cards removed, battery in place, on the cradle via your PC, even though it appears stuck. The signals coming from the USB link may wake up the bootloader routine in the N560?

Solved the problem! Thanks for your comments!
I asked same question in Newplow's guestbook and the person who made pagepool rom answered. I used MTTY to revive my pda.
What I did is in below post. need translation
http://4pda.ru/forum/index.php?showtopic=55274

Hi all,
I have the same problem. N560 is stick on the himalaya picture. I tried to falsh from WM5 to new rom for Wm6 and after installation the pda stuked. So I did a warm reset and now only the start picture is apperaing. Problem is that battery is down now.
Can someone give more info on the process followed to revive the PDA ? I just cannont read russian (may be Jinsu77 ?)
Many thanks for support in advance

same problem here please please please someone help us
the only thing i can do is the l c:\os_213u.nbf on mtty program and nothing else happend to the machine
sorry for my english

read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.

It was me asking on Newplow's guestbook.
In case you're using Vista, you need some trick to be able to rom update. Read below.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
And then you need to download MTTY (I used version 1.42, got it by googling) and follow below steps.
(used google translation from 4pda.ru)
------------------------------------------------------------
For rom update without ActiveSync.
1) take this set of extract, copy it to the folder with the firmware.
2) copy the file os_213u.nbf example in C: \
3) You press the button Recorder + food and poke in the hole reset (Recorder button and hold until you eat dolphins)
4) plug the device to a PC, the Task Manager, shooting process - wcescomm.exe
5) Run mtty, choose Port: USB, connect.
6) If mtty caused an error and shut down, simply restart mtty, if not typed commands, then repeat the procedure with paragraph 3.
7) in mtty command, enter: (first letter in kommande - a little l l от слова from the word L L oad)
> l l c:\os_213u.nbf c: \ os_213u.nbf
Since the end of the process will be an inscription about the error, remove the device from the PC.
9) Run rom update, zhmete "next", until you see dolphins.
10), plug the device to a PC and program.
---------------------------------------------------------------
Hope this helps you all

in advance sorry for my english
I am doing all the instructions carefully and the mtty show this
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,1A0F023Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
the pda shos the dolphins and the full blue bar
after without change anything i run the PocketLOOX5xxFlashTool that i have in the same folder with the :
EnterBootLoader.exe
OS_213U.nbf (originally rom)
RUUServer.dll
RUU.dll
and the only thing i can see is that the PocketLOOX5xxFlashTool is trying to find the pda without any luck
also the pda is stucked in the same screen with the dolphins and the blue bar
do you see any mistake in this procedure

Helppp!!! please

tuluba said:
Helppp!!! please
Click to expand...
Click to collapse
have you closed EVERY process of activesync before proceding with mtty?

I close the wcescomm.exe and the rapimgr.exe is there anything else?

The pocket LOOX 5xx FlashTool cant connect with the N560 and at the and says that Error"The language in this Flash Image update (ENGLISH) differs from that on your device()!" and i have always english rom exept maybe from the last rom "the killer" with the 128MB rom that i dont know if it is an english or something else because the device never opens to see

After flashing in MTTY(don't care about error messages), you need to unplug your n560 from PC. And then proceed romupdate until you see the dolphin picture. Now you plug n560 to PC and cilck next and wait for a while.. Hope it works!

I change the language of the rom and it works
thank very much all of you

At all they have Probs with flash from SD Card: only use a Card with 512MB! I think a Card greater then can't read by the Bootloader....

hey.
i am compeletly new here. I have the same with my n560. I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP

if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)

Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????

ChrisDo said:
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
Click to expand...
Click to collapse
You can usually get back to the boot loader if you do a hard reset. I am sure you know how, if not you will find it in the FSC CDROM manual that came with the device. Let us know if this works? I have got stuck at this point too, so I know it works..... hopefully!

Dead Cava after flashing? (Bad Blocks Solution)-Can mod made tis sticky?

1stly i would like to give a big huge thanks for
everyone who hv helped me in reviving back my cava
esp to jockyw2001 (God bless)
So for anyone else who was stuck at 1st splash screen like i did (the dopod screen). Here is the deal
Note: Tis only work with the Hard SPL
HOW TO
-----------------------------------------------
1. Download mtty
2. Take out ur microSD
3. Disable USB conn on ActiveSync
(Right click on ActiveSync icon on pc --> Conn setting --> uncheck "Allow USB conn")
4. Enter bootloader (3 color screen)
(Press Camera + Voice Rec + Power)
5. Run mtty
6. Type : CMD>task 32
(if it return "Level=0" u r set to go)
7. CMD>info 8
(give info on how many bad blocks)
8. CMD>task 32
9.CMD>task 2a
(let it run ... it will check & repair bad blocks)
10.CMD>task 28
(output:
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 509
Storage Total block: 515
Total Bad Block in CE: 0
NeedToEraseBlockStart: 522
NeedToEraseBlockEnd: 1024
Storage format success)
11. Flash back modded shipped rom (OS only) HERE
12.Keep ur finger crossed
Hopefully tis will help
More info on mtty commands

mod can u make this thread sticky
thanks

wow this will make us feel a lot safer when flashing ROMs. Thank you.

oldsap said:
wow this will make us feel a lot safer when flashing ROMs. Thank you.
Click to expand...
Click to collapse
hope so since it took me a while to revive back my cava .... thx to a certain person though

Good to hear that your device did not break (otherwise you would had an expensive brick )
Cheers

ibeqa said:
Good to hear that your device did not break (otherwise you would had an expensive brick )
Cheers
Click to expand...
Click to collapse
yup ... a very expensive paper weight

upgrade ROM error code HELP PLS
Hi,
Can someone help me pls. I have SE Xpeia X1 and it is with WM 6.1
I went to SE web site where they offerd me to download an aplication in order to update my software and till here all ok I followed the instructios etc. the phone went to that color mode etc. and the update started but gues what it stucked at 10% and a message came up on my PC (the updates is on PC aplication and it requieres an USB conection btween PC and the phone) and the message says "update unsucsesful turn off yr phone and try again....."
ok I did it and I did it .....and .... more than 20 times and now X1 cant start WM6.1 and it is dead. So pls can someone give me an advice what I can do do get back to life my X1 pls.

It recovered him self next day????!!!!!!!!!
HI all,Just to inform you that the next day the update was installed 100%. Somehow the X1 did not stuck and the update pass. So I have alive X1 again.
the case is closed
nice day to all

[HELP] Days with a bricked Diamond

Day2 with a bricked Diamond....
=================================
Background
==========
Happened while trying to flash EnergyROM released 7/22
WinXP, not on any USB Hub, and on Unsigned-Hard-SPL-Diamond-Olinex.
The vol down + back + reset method doesn't go to completion (I have had no issues with BsB roms so far using this method), on the Diamond it shows :
--------------------------
00018003
DIAMING.nbh - FAIL
OS - FAIL
Update Terminate
UPDATE FAIL
--------------------------
If I try to soft reset the screen shows the classic bootloader screen, and the RUUNBH at the top-right:-
-----------------------
Diam100 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v.11
-----------------------
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
--------------------------------------------
I am able to re-flash this HardSPL (and in doing so removes the ROM Upgrade Error and enter into Bootloader mode (vol down + reset) successfully.
I am also able to re-flash my Radio (Diamond_Radio_1.00.25.05.nbh).
Any rom however that I then try to flash using CustomRUU/ROMUpdateUtility does not work, it always gets stuck at around 20% with the below error:
---------------------------------------------------------
ERROR 226 : FLASH WRITE
Flash write error happened. Pls check your PDA phone.
---------------------------------------------------------
I read that I am supposed to be trying signed ROMs that work with my HardSPL, and went to this thread to get one, but same thing it is also stuck at 20%.
http://forum.xda-developers.com/showthread.php?t=400411
Have also tried the below MTTY method describe in some of the Kaiser (Yes, pretty desperate, getting stupid) threads:
======================================================================================
1. Download mtty.exe from here: http://taeguk.co.uk/xda
2. Disable activesync (connection settings -> uncheck "allow usb connections")
3. Kill the following two processesto stop active sync; rapimgr.exe and wcescomm.exe (Ctrl+Shift+Esc, select from the list of processes).
4. Connect your Kaiser to PC using USB cable.
5. Open mtty, select USB port and click OK.
6. Hit ENTER twice, you should see the "Cmd>" prompt.
7. Type the command "boot", you should see something like this:
Cmd> boot
InitDisplay: Display_Chip=1
No card inserted
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
======================================================================================
...except that I don't get the above lines after executing the boot command, instead I see:
--------------------------------------------------
Cmd>boot
InitDisplay: Display_Chip=1
dwDirectNum: 0, dwMatrixNum: 0, dwMicroPNum: 0
Fill RSVD information for block 288 to 321
Storage start sector=0xFF40, total sector=0xB080
Storage start block=1054, total block=706
Total Bad Block in CE: 1
Erase physical block from 1345 to 2032
si backup: Erase physical block from 2032 to 2048
Fixed new dwPSImageSize = 0x5640000
--------------------------------------------------
...and my Diamond boots to the "Touch Diamond" screen with the black backdrop. Can someone help?

try to connect the phone with mtty and type task 29.
this should format your phone.
then connect it with activesync and flash a stockrom onto it.
it that works, try flashing a design rom.

Dude, thanks for your reply... I got the following, this means it failed right?
------------------------------------
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 226 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Cmd>

epiphone said:
Dude, thanks for your reply... I got the following, this means it failed right?
------------------------------------
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 226 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Cmd>
Click to expand...
Click to collapse
try flashing a stock rom. you can download it from the htc website and see what happens.

Dude....Tried this stock rom (actually I tried before trying what you suggested), it still didn't work; the flashing process still stuck at the same place 26%.
RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08_0.93.25_Ship

found this in another thread :
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!

Got this:
Cmd>task 28
Format start
Fill RSVD information for block 288 to 321
Storage start sector=0xFF40, total sector=0xB080
Storage start block=1054, total block=706
Total Bad Block in CE: 1
Erase physical block from 1345 to 2032
si backup: Erase physical block from 2032 to 2048
Format end
Cmd>
Trying stock rom again.....

on my old phone i had to type
format BINFS
to format the flash. you could try that.
if the rom flash still does not work.
you seem to have a bad block on your internal memory. i am not sure how to get around that.
a stock rom fills the entire rom space with new information. that might introduce problems as well.
maybe you should also try a design rom (not the energy one, because that is a large rom)
try the bsb or deepshining. they have less information and might not use the memory at block 26.
if that does not help, you will have to find people with more knowledge than me.

Still can't flash the stockrom still stuck at 26% after trying task 28...
I can't get the format BINFS command through:
Cmd>format BINFS
Command error !!!
Thanks for your time anyway dude... appreciate it.

try searching , i also found this
http://forum.xda-developers.com/showthread.php?t=296722

*deleted repeated post

*deleted repeated post

Dude.. no offence but that I thought is for Hermes, not HTC Diamond? Also that thread seems pretty old...?

Bump... anyone can give other suggestions?

disconnecting any USB device
epiphone said:
Still can't flash the stockrom still stuck at 26% after trying task 28...
I can't get the format BINFS command through:
Cmd>format BINFS
Command error !!!
Thanks for your time anyway dude... appreciate it.
Click to expand...
Click to collapse
try disconnecting any USB device the PC, including Pendrive (leave only the diamond connected), then flash the stock rom

epiphone said:
Dude.. no offence but that I thought is for Hermes, not HTC Diamond? Also that thread seems pretty old...?
Click to expand...
Click to collapse
i am sorry that there is not a solution on a silver platter.
so after reading my link things you could try:
the hardspl is made by the same person. maybe he included the task 2a in your spl as well?
apparently fixing a bad block can be done with a hardspl. maybe you can send the guy creating the hardspl a personal message with your problem.
get your magic wand, wave and say "reparo"
throw your phone out the window or send it for repairs.

Dude, thanks for your answer, nothing helped me still...
I have tried to PM the SPL makers, but quite sure they wouldn't have time to respond Eventually i have had to book my Diamond in for repairs, not sure what is the cost/repair.
My problem now is what should I do in future, since I figure I will flash again... don't see what I done wrong that can suddenly cause this to happen in the first place... I have been flashing for about a year now.

epiphone said:
Dude, thanks for your answer, nothing helped me still...
I have tried to PM the SPL makers, but quite sure they wouldn't have time to respond Eventually i have had to book my Diamond in for repairs, not sure what is the cost/repair.
My problem now is what should I do in future, since I figure I will flash again... don't see what I done wrong that can suddenly cause this to happen in the first place... I have been flashing for about a year now.
Click to expand...
Click to collapse
there is never any garantee for flashing.
things you can try are the same as the things you tried to restore your phone.
so format or flash a stock rom, before a custumized rom.
do not try every rom, but just the ones that seem professional.

i know this is old topic but i want to contribute.
just today had sort of same issue, except my device flashed full until the end where RUU replied error and the device got stuck spl with RUUNBH. i did task 29 and the flashed a stock htc rom and that fixed issue. just like that.

Hello Everyone!
I'm having the same issue as OP, but I tried task 29, task 28 55aa, task 28, and neither worked for me. The flash of a single OS stucks at 76% with flash write error (226), I've searched the forum for hours, but none of the same flash error code issues was mine. I can reflash radio, but not the os, my hardspl is olinex 1.93, when I reflash the radio it start and stucks at the Touch Diamond screen with the radio and stuff number on the right side. If I then try to flash a rom (even stock rom from HTC site!) It freezes around 65% with the same error. If I command in mtty task 16 0, then again it freezes on the Touch Diamond screen. Please anyone can help?
UP: Got it resolved!! My internal flash is damaged, coz if I flash a 60Mb rom, it succeedes, if I flash a rom with over 80mb in size, it fails.

Please Help, upgrade problem!

Hi, I have a huge problem.
I tried to update the software for my O2 exec (first time)
The first two steps succeed, but the CO stopped than 69%, I turned off the o2, I tried another version, but the process stop than 10% of stops, it does not do anything ... What can I do? Somebody help, please!!!!
Thank you in advance

Welcome to forums
Have a deep read here on upgrading ROM section
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,

MTTY can not open the USB port...
Please help me

Are you using Vista or XP on your PC? If XP, look for switching USB off in Activesync; if Vista, search on Win Mobile Device centre connections and untick "Allow USB connections". (or maybe it's the other way round!!!) Switch everything back on after you finish flashing.

I have XP. I bring my pda for my friend. The connection via USB was successfull, we made the proccess in MTTY, but the program told that can not read the fat (or something like this...)
Is there still hope?

Thanks for help, the problem is resolved. My Uni is working!

Have almost same problem.. but now,...
all upgrade always end in 30%
and now I can't see USB on MTTY (try on win7 and XP)
thanks in advance

I use mtty1.42.exe
type :
task 28 55aa, set 14 10, set 14 9, set 14 20
update can be run.. but always stop in 12% now
try with other rom.. still stuck and give me error 112
I've charge the batt still error

Hyem
Same problems .....Same solutions.
Read Wiki
Read stickies...For those stuck in bootloader..mamaich method
Thread started by hdubli...
Read this thread...it has almost eeeeevery possible scenario we encounter and it's really a good ROM....it's only 12 pages
http://forum.xda-developers.com/showthread.php?t=468776

Remove all cards and try again in bootloader with AS USB unticked.