Develop Bugs

someone can help me with mtty???

hi all,
I am trying to make the radio work again using this procedure:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
but I got a problem and I'd like if someone can help me.
The problem is that I start mtty, I connect the phone in bootloader, I put USB and the I hit twice enter, but the prompt is always CMD>, doesn't change in USB>; I tried many times hitting enter twice, but nothing changes.
How can I do it?
thankyou
Mick

Don't work that's not a problem its just the version of mtty you are using, it should still work.

i am going crazy...I am tring the guide step by step, but when I try tu update radio,it get stuck.
I am with NO GSM and NO IMEI in this moment.
please
help me
(maybe on msn messenger or skype this way I can tell my problems directly)

in Mtty try typing:
task 32
you should get level = 0 to say your device is SuperCID if not you could try the SDcard Method http://forum.xda-developers.com/showthread.php?t=293651&highlight=task+32

thank you markafreeman,
I followed your instruction and I vas able to get level = 0,
but the problem is still that I have Cmd> prompt instead USB.
(can it be a driver problems??)
anyway, I wrote as the guide says:
Cmd> password BsaD5SeoA
Cmd> set 1e 1
Cmd> erase a0040000 c80000
Cmd> erase a0cc0000 c80000
Cmd> erase a1940000 640000
Cmd> set 1e 0
I closed the mtty, restart the PDA on the bootloader again (HERM100, IPL-1.04 Spl-2.10.Olipro) and I sent the official old ROM RUU_Hermes_QTEK_ITA_2.11.258.1_102_6275_1.38.00.10_108_Ship, it starts but get stuck at 13% and then I got on the pc error 262, upgrading error!
I tried twice and it stops always at 13%

UP!!please...somebody give me hope !

I'd probably try the SDcard method I posted earlier at that point.

On some versions of MTTY it shows CMD on some it shows USB, nothing to worry about.

thank you markafreeman:
I tried to do that, but when it start to write radio,it just stops.
thank you drummer10630:
I didn't see any changes in the phones,also if I try with Cmd> prompt
when I go to install RADIO,it stops

Hmmm the other thing I've seen people suggesting with connection problems is on the hermes go to settings and usb to pc and untick the advanceed netowrk option.

mickscores said:
hi all,
I am trying to make the radio work again using this procedure:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
but I got a problem and I'd like if someone can help me.
The problem is that I start mtty, I connect the phone in bootloader, I put USB and the I hit twice enter, but the prompt is always CMD>, doesn't change in USB>; I tried many times hitting enter twice, but nothing changes.
How can I do it?
thankyou
Mick
Click to expand...
Click to collapse
task 28 55aa
then flash again!

Thank you yyyuanye,
I tried your command, it told me that something was formatted, then I tried to re-flash form SD card, but it stops when it's flashing the RADIO.
if you got any idea form me...please...I will be waiting for it.
the Mtty communicate with my Herm because it replies with the coomands Cmd> info, so now it's not a mtty problem anymore.
I don't know, but maybe, in mtty there is a command that erase everything on the radio and make it ready for a new installation.

Huge Diamond Problems...

Hi ppl, i have this horrible problem all of the sudden.
I cant seem to get my phone to work sience 3 days ago, i think it has to do with a "Over Flashing Syndrome". I think ive flashed it too many times sience i got it last year. Ive had some really random problems, like some programs not wanting to install at all and programs looking distorted, now lastly hard-reseting it self everytime i Soft Reset and finally now it doesnt even boot even if i hard-reset, it stucks on the "Touch Diamond" start screen, where the radio and ROM version shows... ...
Ive heard something about flashing it to stock to get rid of these kind of problems, can somebody point me to any specific direction that can show me how to fix this? Would be great.
Thanks in advance.

mtty in usb mode, task 29.
Search thread about "strange problem [solved]".

OMG... i cant get this mtty thing to work for me... maybe its Win 7 fault or something...
Gonna try it on the virtual XP ... this is frustrating as hell...

yeah i also had problems with mitty, try with xp it should work

OMFG finally i made it work, i had to install another HTC Sync USB Driver from a thread, then i had to run the original mtty xp in Administrator Mode in Win 7 and select USB.
Now i got this msg after doing what they told me.
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 1506 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Ive read that some Fails happen but are often just ignored.
Im gonna try flashing a ROM now, fingers crossed for me plz.
[Im going to write how i did for further notice, To just clarify some stuff im using Windows 7 build7201:
First of i downloaded and installed the driver in this thread:
http://forum.xda-developers.com/showpost.php?p=3424459&postcount=11
Then i Used mtty in this link: http://forum.xda-developers.com/attachment.php?attachmentid=165433&d=1236782363
and followed these steps:
Procedure:
1. bring the device to bootloader.
2. Launch ActiveSync on PC
3. Go to connection settings
4. Uncheck the Allow USB Connection
Connect the USB to the Phone
5. Now, run mtty1_1_.42_538 on PC.
6. CMD>task 29
7. Flash the ROM of your choice.]
BTW... dont be as dumb as me and still have mtty running while trying to flash ur phone... shut down mtty THEN start to flash ur phone xD stupid me
Love u all here. thanks for pointing me in the right direction!!
EDIT: Its working like i just bought it!! Thanks a lot again, my problem:
SOLVED!!

Glad you got it sorted out buddy.

just like the thread i posted a week ago, and i'm sure more and more like this going to appear,
so please one of the moderators put this one as sticky

well... it happend again for me after 4 flashes... Hard Resets itself--- but MTTY works everytime anyways... so im not worried about having to redoo that step several times....
But something tells me theres more to this problem anywayz... The Hardspl i use is 1.93 --- these new roms go on what 2.09 ? shouldnt there be a hardspl 2.09?`or am i completly wrong?

Serious upgrade rom error

Hi all.
Trouble. Big i guess.
Using mtty i tried to upgrade to the GenY D2 4.1 Rom. I flashed a lot of times using mtty with good results. However today my diamond hangs on the upgrading process. So after an hour I reset the device. Then i got the bootloader mode saying "Upgrade ROM code error. Please try again".
Another shot (using the whole mtty cycle again) doesnot settle the problem however.
I guess that something went wrong with the copyprocess of the rom from my computer to the internal storage of the device.
some more info:
after task 28 in mtty i see this:
Cmd>task 28 55aa
Format start
Fill RSVD information for block 288 to 321
Storage start sector=0xC740, total sector=0xDFC0
Storage start block=830, total block=895
Total Bad Block in CE: 0
Erase physical block from 1120 to 2048
formatstorage Bad block found: 1416 How bad is this??
Format end
Cmd>​
So now what? Bricked or....
In general : somebody got an idea or advice?
More specific: is there a way i can copy a new rom to the internal storage, considering i am stuck in bootloader.

Elrohir said:
In general : somebody got an idea or advice?
More specific: is there a way i can copy a new rom to the internal storage, considering i am stuck in bootloader.
Click to expand...
Click to collapse
In this Thread http://forum.xda-developers.com/showthread.php?t=540290 see post 4 re using a ROM file from your PC over USB.

widemouth31 said:
In this Thread http://forum.xda-developers.com/showthread.php?t=540290 see post 4 re using a ROM file from your PC over USB.
Click to expand...
Click to collapse
Thnx. I completely ran over post 4 in the past. So i could flash over usb, the manual in post 4 tells me to finally use 'Rom Flasher' to flash the rom:
It worked. Thank you so much for pointing the way. Cheers!

Problems when flashing my diamond

I tried to put my diamond on factory default OS.
But when i tried to flash in the tricolor screen with this config
DIAM110 64M
SPL-1.93.0000
MIcroP-DIam (led) v11
PSOC Diam Stage_PVT v0x32
So, when i try to flashing a cooked rom, the progress bar freeze to 0%, and when i try to put some official rom the progress bar is stuck in 1%.
The Mtty shows the next :
CMD
Command error !!!
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 242 FAIL !!!
ERASE block 1026 FAIL !!!
ERASE block 1670 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
The serial number of my phone is HT836KK00873, i try to put some official roms, but i cannot find the way to work on the phone (always the progress bar stop at 1%)
Can anyone help me please ? thanks

jaguar76 said:
I tried to put my diamond on factory default OS.
But when i tried to flash in the tricolor screen with this config
DIAM110 64M
SPL-1.93.0000
MIcroP-DIam (led) v11
PSOC Diam Stage_PVT v0x32
So, when i try to flashing a cooked rom, the progress bar freeze to 0%, and when i try to put some official rom the progress bar is stuck in 1%.
The Mtty shows the next :
CMD
Command error !!!
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 242 FAIL !!!
ERASE block 1026 FAIL !!!
ERASE block 1670 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
The serial number of my phone is HT836KK00873, i try to put some official roms, but i cannot find the way to work on the phone (always the progress bar stop at 1%)
Can anyone help me please ? thanks
Click to expand...
Click to collapse
Hi,
If you want to flash a cooked rom,you must update your SPL to 1.93OliNex.
So,pls update your SPL to 1.93.
About MTTY,you can first run info 8 and task 28.
good luck

Using Mtty without having hspl 1.93 olinex or 1.40 olinex is not a good thing,you may brick your phone

HELICOPTER88 said:
Using Mtty without having hspl 1.93 olinex or 1.40 olinex is not a good thing,you may brick your phone
Click to expand...
Click to collapse
What do you think about that ? My phone is bricked ??
I try to flash with mtty but if you see the version of hspl is 1.93.0000, so i guess thas is a spl signed, cause when i try to put a coocked rom, the progress bar dont move, still in 0% but when i put an official rom the progress bar shows me 1% and stops.
Is there any solution for my problem or i just simply broke the phone ???
Thanks

jaguar76 said:
What do you think about that ? My phone is bricked ??
I try to flash with mtty but if you see the version of hspl is 1.93.0000, so i guess thas is a spl signed, cause when i try to put a coocked rom, the progress bar dont move, still in 0% but when i put an official rom the progress bar shows me 1% and stops.
Is there any solution for my problem or i just simply broke the phone ???
Thanks
Click to expand...
Click to collapse
You may try using http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
the you should be able to flash custom roms

HELICOPTER88 said:
You may try using
the you should be able to flash custom roms
Click to expand...
Click to collapse
I try to do what you said (Unsigned-Hard-SPL-Diamond-OliNe) but the progress bar stay in 0% and get an 262 connection error
I starting to think that my cel pass away to a better life

jaguar76 said:
I try to do what you said (Unsigned-Hard-SPL-Diamond-OliNe) but the progress bar stay in 0% and get an 262 connection error
I starting to think that my cel pass away to a better life
Click to expand...
Click to collapse
Did you tried to flash in bootloader mode?
to go into bootloader press soft reset then volume down
What os do you have on your computer?

HELICOPTER88 said:
Did you tried to flash in bootloader mode?
to go into bootloader press soft reset then volume down
What os do you have on your computer?
Click to expand...
Click to collapse
I try the bootloader (see the attachment in the first post), anyway, its the only way to comunicate with my phone
Mi problem is that i cannot upload any rom signed or unsigned to the phone

can't work yet
any ideas please ?
thanks

[Q] Rom problem pls help!

Hi!
I have problems with my pda.
Before the refresh, the free ram is about 20% - 30% after a HR, so i can't use it.
First was the hspl, installed from the IS, there was no problem. I see it in the boot screen: spl-1.40.olinex
then my next step was sone_2.5_nomanila installed from IS. It was great!
Then next was sone_v.2.1._nomanila_hun From IS.
Than i think i made a mistake.
I found this radio rom: radio_1.15.25.14.nbh and tryed to refresh the radio
and after the instal the pda wont start...
i see the black background with the touch diamond and nothing happens... after 2 minutes its restart.
i have tryed everything...
downloaded 3 stock roms, and all of them stops at 13% with ERROR [226] : FILE WRITE
i can istall the cooked roms bud the wont start. all of them are the same, stops at boot screen and restart. but costumRUU sad the installation was complete.
I changed the hspl many times, tried with 1.40 olinex, 1.93 and so on....
I cant access the IS.
i tried the task 29 in MTTY, here is the log:
Cmd>set 14 0
HTCST ÚČŇHTCE
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 374 FAIL !!!
ERASE block 681 FAIL !!!
ERASE block 746 FAIL !!!
ERASE block 1430 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Cmd>
i am trying to refresh the radio rom but all of them are finish with error.
so i cant install stock rom, because install stops at 13%, i can install cooked rom but it wont start, i cant install radio because all version (from Radio_1.00.25.06 to RADIO_1.15.25.14) terminate with error 226 or error 270
i am tired with this, and i need your help please!
(sry for my english :S)

MohaHGA said:
Hi!
I have problems with my pda.
Before the refresh, the free ram is about 20% - 30% after a HR, so i can't use it.
First was the hspl, installed from the IS, there was no problem. I see it in the boot screen: spl-1.40.olinex
then my next step was sone_2.5_nomanila installed from IS. It was great!
Then next was sone_v.2.1._nomanila_hun From IS.
Than i think i made a mistake.
I found this radio rom: radio_1.15.25.14.nbh and tryed to refresh the radio
and after the instal the pda wont start...
i see the black background with the touch diamond and nothing happens... after 2 minutes its restart.
i have tryed everything...
downloaded 3 stock roms, and all of them stops at 13% with ERROR [226] : FILE WRITE
i can istall the cooked roms bud the wont start. all of them are the same, stops at boot screen and restart. but costumRUU sad the installation was complete.
I changed the hspl many times, tried with 1.40 olinex, 1.93 and so on....
I cant access the IS.
i tried the task 29 in MTTY, here is the log:
Cmd>set 14 0
HTCST ÚČŇHTCE
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
ERASE block 374 FAIL !!!
ERASE block 681 FAIL !!!
ERASE block 746 FAIL !!!
ERASE block 1430 FAIL !!!
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Cmd>
i am trying to refresh the radio rom but all of them are finish with error.
so i cant install stock rom, because install stops at 13%, i can install cooked rom but it wont start, i cant install radio because all version (from Radio_1.00.25.06 to RADIO_1.15.25.14) terminate with error 226 or error 270
i am tired with this, and i need your help please!
(sry for my english :S)
Click to expand...
Click to collapse
There are a couple of mistakes you have done. One for sure is you installed HSPL via IS. Of coz it can be done you have shown. But as to the safety of the process i cant agree to.
Secondly you should have tried jump sspl in the first place. This wudnt have been achieved since you flashed via IS.
Thirdly, i m wondering if you tried mtty after your device failed to start. If its the case,
Owing to the first two, i say your device storage partition is really messed up.
So what we will do at this stage is try to revert to your htc stock rom, which shud have the appropriate memory block addresses to revert ur ROM and Radio.
Let us know abt your device details if you can in ur bootloader mode. And where you bought the device.

Thank you for the help!
I tried to install a lot of stock roms, but of of them stops at 13% with ERROR 226.
Itried mtty too...
I bought second hand.
When i am in the bootloader, i see:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Any idea?

MohaHGA said:
Thank you for the help!
I tried to install a lot of stock roms, but of of them stops at 13% with ERROR 226.
Itried mtty too...
I bought second hand.
When i am in the bootloader, i see:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Any idea?
Click to expand...
Click to collapse
Does your device have a front facing camera and can you do videocall.
I assume you bought from someone who is in the same country as you. So whats ur country bro?

Yes it has a face camera, and i can videocall.
I am in Hungary, and i bought it here.

okay. lemme see if i can come up with a stock rom for you.

can you try to see if you can download the stock rom from this link
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483
you will need to scroll down and input ur serial number of the device (which can be found under ur battery)
if u you cant download lemme know

I read this post -> http://forum.xda-developers.com/showthread.php?t=862690
hmm... maybe i tried with wrong stock roms?
i was at htc.com at support but i cant download rom from there because i write my S/N to the box, and they say
"Sorry, this software download is not suitable for your device."

MohaHGA said:
I read this post -> http://forum.xda-developers.com/showthread.php?t=862690
hmm... maybe i tried with wrong stock roms?
i was at htc.com at support but i cant download rom from there because i write my S/N to the box, and they say
"Sorry, this software download is not suitable for your device."
Click to expand...
Click to collapse
since you are located in europe you shud try the link i gave which is htc europe.

I tried your link, and its the same...
Sorry, this software download is not suitable for your device.

can you keep cross checking ur serial number with htc website which is likely for ur area.
else check my pm

sry i dont understand it

hello MohaHGA....jus now i came back...lets see if we can solve ur prob...
give me a few minutes...