Hi, I have a huge problem.
I tried to update the software for my O2 exec (first time)
The first two steps succeed, but the CO stopped than 69%, I turned off the o2, I tried another version, but the process stop than 10% of stops, it does not do anything ... What can I do? Somebody help, please!!!!
Thank you in advance
Welcome to forums
Have a deep read here on upgrading ROM section
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
MTTY can not open the USB port...
Please help me
Are you using Vista or XP on your PC? If XP, look for switching USB off in Activesync; if Vista, search on Win Mobile Device centre connections and untick "Allow USB connections". (or maybe it's the other way round!!!) Switch everything back on after you finish flashing.
I have XP. I bring my pda for my friend. The connection via USB was successfull, we made the proccess in MTTY, but the program told that can not read the fat (or something like this...)
Is there still hope?
Thanks for help, the problem is resolved. My Uni is working!
Have almost same problem.. but now,...
all upgrade always end in 30%
and now I can't see USB on MTTY (try on win7 and XP)
thanks in advance
I use mtty1.42.exe
type :
task 28 55aa, set 14 10, set 14 9, set 14 20
update can be run.. but always stop in 12% now
try with other rom.. still stuck and give me error 112
I've charge the batt still error
Hyem
Same problems .....Same solutions.
Read Wiki
Read stickies...For those stuck in bootloader..mamaich method
Thread started by hdubli...
Read this thread...it has almost eeeeevery possible scenario we encounter and it's really a good ROM....it's only 12 pages
http://forum.xda-developers.com/showthread.php?t=468776
Remove all cards and try again in bootloader with AS USB unticked.
Related
Any help would be great....
I have a MDA Compact III issue when trying to upgrade to the ARTEMIS TOUCH 2.1 or 2.0 software
Unfortunatly, my pda was at 49% charge when i first tried, so stage one got to the end, then told me to charge my fone more and ended.
Thus i charge the fone to 75% and re-started. However, upon reconnecting the fone to commence the restart, the USB device was not recognised.
After removing the Active Sync and indeed the USB Driver from the PC and re-installing it, the conenction was re-established, however, it now often drops the connection. Plugging away, i tried the install Step 1 once more, and upon getting to 100% in the cmd part, and then progressing through the wizard, whereby the PDA displayed the progress bar reachinbg 100% (of the unlock stage) the PDA then reboots, and the connection is lost...and doesnt re-establish itself....and then the wizard reports Error [270] : Update Error The image file is corrupted. Please check your update Utility
Now, i have tried various sources for the software, and indeed tried both 2.0 and 2.1.....
Now i have a PDA that intermittantly drops its USB connection (and needs the USB removed and re-added on the PC) and is now slower than it was, plus never got to step 2 to get the software on iot.....
Can anyone help? Else i have a broken phone so to speak.....
Thanks alot in advance
Paul
paulcharles1 said:
Any help would be great....
I have a MDA Compact III issue when trying to upgrade to the ARTEMIS TOUCH 2.1 or 2.0 software
Unfortunatly, my pda was at 49% charge when i first tried, so stage one got to the end, then told me to charge my fone more and ended.
Thus i charge the fone to 75% and re-started. However, upon reconnecting the fone to commence the restart, the USB device was not recognised.
After removing the Active Sync and indeed the USB Driver from the PC and re-installing it, the conenction was re-established, however, it now often drops the connection. Plugging away, i tried the install Step 1 once more, and upon getting to 100% in the cmd part, and then progressing through the wizard, whereby the PDA displayed the progress bar reachinbg 100% (of the unlock stage) the PDA then reboots, and the connection is lost...and doesnt re-establish itself....and then the wizard reports Error [270] : Update Error The image file is corrupted. Please check your update Utility
Now, i have tried various sources for the software, and indeed tried both 2.0 and 2.1.....
Now i have a PDA that intermittantly drops its USB connection (and needs the USB removed and re-added on the PC) and is now slower than it was, plus never got to step 2 to get the software on iot.....
Can anyone help? Else i have a broken phone so to speak.....
Thanks alot in advance
Paul
Click to expand...
Click to collapse
well, I'll just try to give you some suggestions as I don't know much about MDA Compact III ,it does not fall in the category of wizard,it's a Magician device and I'm a wizard k-jam user. anyhow as a general of upgrading is to have your battery fully charged or atleast must have more than 70% charge.cuz during flashing in RUU upgrade mode,it does not charge,so if while during flash something goes wrong or it takes more time to flash,it shud have enough power to go through the whole process.if it does not have enough power to complete the process,it fails to flash properely and thus have a bad flash creating problems.so same has happened with u, you have a bad flash
well in wizards we have certain methods to revive the device or recharge the battery,i have no idea about your device,but can only suggest get the battery charge,secondly your usb connectivity problem is also due to the bad flash,cuz as there is no OS info on the device,it wont be able to establish the connection,which windows are you using,try to upgrade with winxp sp2 and active synchronize ver 4.5
as i have no idea about Magician upgrading method so wont comment further,but advise you to look in the below thread,it might be helpful,cuz its about Magician MDA Compact III
As your posting in the wring forum you might not get much help here,ok
http://forum.xda-developers.com/forumdisplay.php?f=276
good luck
thanks
thanks for the reply. Got it working - used 2.0 to unlock it, and 2.1 for the actual rom upgrade...
Hi,
I tried to upgrade my XDA using Ranju's latest updater, the whole process failed and now I'm stuck at the BL screen "USB" at the top (when connected, otherwise it says "serial") and "v1.00" at the bottom.
My PC, SyncCentre and Windows Mobile Device Centre (I'm using Vista) all show the device as being disconnected (up until trying to upgrade everything had been fine).
As it's not showing up on my PC all of the software options for recovering it dont fail, all end with a plethora of USB not connected errors etc
I've tried the how-to on the wiki: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial to no avail.
Does anybody have any ideas? Greatly appreciated,
Thanks,
Lee
with jasjar-bl1.01-ruu-v1.2 I always restart my JJ Leave your uni in bl and start the application Good luck......
I think the Vista is not the problem this upgrade don't use AS or "in italian centro gestione dispositivi WM"
Bye
M.C.
Well, I flashed my Qtek a while ago, it failed to flash (using Vista) and doing a hard reset after it whas hanging at the startupscreen(the one with all the rom/radio numbers). No matter what I tried, following the instructions on Vista windows mobile center all failed... The good news is that your computer and your PDA still see when it is connected, ie USB/Serial, like in my case!
I then tried it on my desktop/XP, it flashed without a problem...
The funny bit is that I flashed my herald (WM6) 2 times using Vista without any problem...
I cannot explain but if U have the possibility, try and see if it works on XP...!
Good luck!
are you trying to flash it WITH your SIM card and / or SD card inside? If so, try taking them both out! It worked for me a few times!
I would start by getting rid of vista !
i had the same xprience
the different was i downgrade from wm6 to wm5 (i need the vcall)
failed in vista, succeed in xp
-> my advice : try in xp !! don't forget to remove the sd card
Manual for how to flash a rom in Vista
Read this post, you have the solution to the problem here:
http://forum.xda-developers.com/showthread.php?t=313001
You need to update the driver manually, if not, will not be able to install the driver.
You need to do this without sd/sdhc and without the sim.
If you follow these instructions, you can flash with success.
Greetings.
Kali.
Help please
i have a t-mobile uk mda compact 3 phone nd im on t-mobile uk tariff, i have downloaded the official t-mobile uk windows mobile 6 rom.
when i atcive sync and go to flash the new rom i get the utility program up, the phone turns different colours ie red, green blue with black strips, the bar then shows on the pda on the pc screen it gets to 3% and bang invaild error 260 and the phone then resets
ive tried it on xp as im on vista same thinf happens, ive tried uspl, no joy can someone tell me how to get thos rom flashed to the phone in vista a easy step by step procedure to follow cause so far ive lost 8 hours since sunday to tonight
please help.............
SD card removed?
remove your SD card
USB board
you may have been not so carefully with the USB connection contact of the phone, or you ahve charged the phone at car while you were starting the car engine..some guys repaired this in service, or it passes by itself.
at me i tried different days and different softs ... and i did i, i got the same error.
fun0815 said:
remove your SD card
Click to expand...
Click to collapse
Hi i have removed SD Card, tried it without, with also with and without sim card still no joy i need step by step help on this
pskint said:
you may have been not so carefully with the USB connection contact of the phone, or you ahve charged the phone at car while you were starting the car engine..some guys repaired this in service, or it passes by itself.
at me i tried different days and different softs ... and i did i, i got the same error.
Click to expand...
Click to collapse
The phone usb connector is fine, i dont charged the phone in a car as i dont own a car
so what is ther soultion there is nothing wrong with the phone or the connector as it connects up via usb and uses active sync also installing other software and transferring pictures, music to and from it also work fine!
i can see both the phones memory and sc card in my computer.
its just this bloody rom file and error 206 that i am still needing someones expert advise and step by step help on
Please Please Please Please Heeellpp Aargggh Part 2
CAN someone please help me out and to whoever has managed to upgrade using vista!!!!!!
please help
After searching this forum, this came up:
http://forum.xda-developers.com/showthread.php?t=312052
Title: USPL - 100% Working in vista
step 7 says:
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
Suggest you read that thread, hopefully it solves your problem.
Okay, I've searched alot to get this thing solved. When I try to update my rom, the update starts normally, but then my telephone screen turns black, my gets disconnected, windows tells me it has found new hardware. The update failes and returns error 260 (connection lost). When I soft-reset the telephone afterwards, it returns to it's old shape.
Info about my telephone.
Rom: 1.93.404.1 NLD
Radio: 1.0025.05
PC: Windows XP SP 3, Active Sync 4.5
I tried to update with this rom: RUU_Diamond_HTC_NLD_2.03.404.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I also tried to update to Hard-SPL but that gave me the same error.
PLease guys does anyone of you know how to fix this? (personally I think it's windows xp which is screwing up).
Thanks in advance, I appreciate all help.
Yours, Martijn.
Even the tiniest tip may help (A)
I had the same trouble with that rom, I tried from internal memory and it worked. Search the wiki I am sure the info is there.
"ERROR [260] : UPDATE ERROR
This error occurs when there is an "open port error" before upgrading the CE ROM image. Solution: You can reset the device and run RUU again. If you still encounter an "OPEN PORT ERROR" again, reset your computer and try again."
This is what the WIKI tells me. But I have tried that. How did you manage to perform the update on the internal storage? Because I tried that with hard-spl but it wouldn't work.
Besides I only have .exe files for the Hard-Spl and the official rom from HTC.
Thanks for your reply though.
EDIT PART, just read this on another thread in the wiki:
ERROR 260 (Update Error):
"Your phone is not connected to ActiveSync. Check your connection or restart the phone. Also make sure in ActiveSync that "Allow USB connections" is checked (under File->Connection Settings). If this still doesn't help, then remove the memory card and SIM card before flashing."
I'm going to try this now, if it worked, I'll let you know
Just found out I have a CDMA version or something, I'll try google for the problem now.
Get the rom image from your temp directory and look here, found in the wiki
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.
dickenz said:
Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.
Click to expand...
Click to collapse
It looks alot like your problem yes. But last time the hardware installed correctly, then the patch I found for CDMA models on ppcgeeks failed, and my telephone got bricked. So I'll need to get that fixed first. After that I'll sure think twice before I try another rom update :/
Thanks for all the help though, and I have to advice everyone to not use the hard-spl for cmda users from ppcgeeks unless you're 100% sure it fits your model!
Hello,
I have a spv M2000 orange. I tried to update to windows mobile 6 I found here.
everything went fine at the beggining, but then activesync did the usual beep when disconnection occurs between pc and the smartphone. there was still the message saying "checking the information on your device... please don't disconnect... "I waited for a long time. but nothing happened then. still a black screen on my smartphone with "USB V2.07" written on it.
can anyone help me to find out a solution ?
thanks !
there is nothing lost or broken at this point, just try again using the instructions given here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
there is probably something you forgot.
thanks Chef_Tony, you give me back some hope !
I tried to flash back to wm2003, and it works fine.
I will follow very closely all the steps of the procedure described on the page you pointed at, and tell you afterwards.
thx again.
ok it works fine.
I forgot to remove the memory card when flashing the first time.
thanks again for the help
Hi. I'm a new member. I need your help. I try to flash my PDA2K with HTC_BlueAngel_WM6.1_WWE_Final_by_Ham3r using WMDC on my Pc with Vista... but without put my device into Bootloader mode. The software is started, my PDA2K was blocked with "USB" on top of the screen and "V2.07" on the right bottom. After nothing more. I tried SR, HR, like the instruction on http://wiki.xda-developers.com/index...ade1_WM2003SE0, but nothing. My PDA2K is dead. On screen, nothing. What can i do? I can resurrect my PDA2K? Thank you
ok, first of all, that link does not work. secondly, yes! your Ba is not dead, it is in a state called "stuck in bootloader" which is due to your attempt to flash under windows vista, which does not work the same way as under win xp. because, during the upgrading process windows vista, being smarter than xp, discovers the device changes and downloads new drivers and installs them, which disconnects the device, and in the beginning of the upgrade process the upgrade utility tells you, never to disconnect the device, unless the process is finished, but since vista is doing it on its oqn, you can't do anything about it.
normally i would advise beginners to use a windows xp pc, i even heard of people managing to upgrade from vista, using a windows xp virtual machine, but in your case, with the device already stuck, you should have a deep look over -=this=- and -=this=- before even attempting to flash again. then you should think, whether you deleted wm2003's extrom before you started upgrading, probably not!
so to upgrade, you should flash wm2003 again, first.
the entire process of upgrading is described pretty good -=here=-.
you say, you want to upgrade to wm6 from wm2003 and you use vista, then you get to all the steps needed for the first upgrade, please don't skip anything, please read carefully, if there is anything, you don't understand, please post back here, BEFORE destroying the device
with best regards
Chef_Tony
Thank you for your help. I'm following step by step the instructions of your links, but my PDA2K don't work. It's appeared again "Serial" at the top and "V2.07" at the bottom, but the Perform Reset don't appeared (point 3 of Link: http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5). Also WMDC don't see the devices either before or after the instruction on this link http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic ( i have never seen the boot option because my device don't make a perform reset). Help me....Thank you for you patience.
P.S.: I have also tried with my other pc with XP, but even ActiveSync see my PDA2K. However, in both my Pc, device manager show mobile device (microsoft usb sync).
I followed this procedure in this link http://forum.xda-developers.com/showthread.php?t=304408 with mtty.exe and my device is raised. Now is as good as new. Try with caution now. Thank you for everything.