Related
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
Hello all, I have been experimenting with WM6 roms. Unfortunately, the last one I attempted to flash, was the Autrailian version for the Dopod. It screwed up my phone. All I have now is the red, green and blue bars with some info. I tried everything, soft and hard reset, remove battery, etc. I cannot escape this screen.
TRIN100
1PL-1.00
SPL-9.99.CP
The problem is that I cannot connect to active sync any more to reflash. It wont let me. I am hoping there is a solution and any help would be greatly appreciated.
Thank you in advance.
Palermitano said:
Hello all, I have been experimenting with WM6 roms. Unfortunately, the last one I attempted to flash, was the Autrailian version for the Dopod. It screwed up my phone. All I have now is the red, green and blue bars with some info. I tried everything, soft and hard reset, remove battery, etc. I cannot escape this screen.
TRIN100
1PL-1.00
SPL-9.99.CP
The problem is that I cannot connect to active sync any more to reflash. It wont let me. I am hoping there is a solution and any help would be greatly appreciated.
Thank you in advance.
Click to expand...
Click to collapse
Usually U don't need activesync for ROM flashing...
By the way, to recover your situation I read somewhere that U have to flash an original WM5 ROM from HTC before try to flash any WM6 cooked ROM.
Try also to read here ... http://forum.xda-developers.com/showthread.php?t=308691
Palermitano said:
TRIN100
1PL-1.00
SPL-9.99.CP
Click to expand...
Click to collapse
This is hard-SPL from des.
You should be able to flash almost anything by just connecting your phone and launching an update from windows xp...
edit : as Stratos74 said, you don't need active sync at all. To know il your phone is connected, juste verify that there is "USB" written on screen instead of "Serial".
[How To] Flash KS20 Complete Guide + Programms !!!
OK, I have really grown tired of people "crying" and wasting forum posts asking how to flash a rom, how their device can be recognized in LGMDP etc.
THERE ARE SOME MANY FREAKING GUIDES AND HELPFUL POSTS!
So I have created my own fully(I believe ) understandable guide on how to flash,brand,unbrand phone and restore .nv2 !
You can ask any question you want,nag to me,swear me,etc. I really like helping people!So please do not post in Spocky's or Farah's Threads for how to flash their roms!Everything you need is here!
***I am not responsible if you brick your phone or your dog dies ***
Guide Information:
www.mediafire.com/ibanezman192
If you appreciate my work,you can buy me a coffe!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RBB5HSMJGCWGE
great, I will check it out and try it.
Thanks, man.
You are welcome
When flashing my KS20 in emergency mode, after ~10 sec the LGMDP said something about an QCSBL writing error, or somethint li that. I pressed OK too early
Now my phone doesn't work, can't turn it on and no emergency mode. What can I do now?
Take out the battery,insert it and do a hard reset.
help...
hi ...i have a problem with my ks20...i'd installed application from htc, opera browser build for wm6.1 or 6.5...at first it worked but after soft reset my phone dont open anymore...it stock on the bootloader showing lg icon only...is there anyway for me to hard reset my ks20...please help if somebody knew or experienced this....thanks
algabz said:
hi ...i have a problem with my ks20...i'd installed application from htc, opera browser build for wm6.1 or 6.5...at first it worked but after soft reset my phone dont open anymore...it stock on the bootloader showing lg icon only...is there anyway for me to hard reset my ks20...please help if somebody knew or experienced this....thanks
Click to expand...
Click to collapse
1)Wrong thread.Please do not post irrelevant things.
2)Download my guide and you will see how you can hard reset.But I cannot understand why your phone hungs up!I do not think this has to do with opera.I have opera and it works fine.
Help! My LG KS20 is dead!
I have tried searching, but nothing came up.
Yesterday while flashing, it said something timeout (1st time the bar runs across)
Now, I cannot activate emergency mode. I cannot charge the phone. There is no response, no light. Charging the battery full has no effect. Taking the battery out has no effect too.
Is there any way to fix this? My warrenty expired just yesterday
ryanswj said:
Help! My LG KS20 is dead!
I have tried searching, but nothing came up.
Yesterday while flashing, it said something timeout (1st time the bar runs across)
Now, I cannot activate emergency mode. I cannot charge the phone. There is no response, no light. Charging the battery full has no effect. Taking the battery out has no effect too.
Is there any way to fix this? My warrenty expired just yesterday
Click to expand...
Click to collapse
Very strange problem!Maybe your battery is dead Take out the battery and connect the mobile with the pc.If nothing happens then it is not a battery problem.Have you tried a correct hard reset?By saying correct, I mean holding the 3 buttons for many time until the leds flash and then flash out.Then you must release the buttons.
Thanks ibanezman for your reply...
Nope, nothing. Battery is fully charged (I have an external LG charger that was given free).
Nothing happens when I remove the battery and connect to computer. I cannot do a hard reset, because there is no LG logo, and no lights. Not green, red, or blue.
I can't flash in emergency mode, because holding down Internet Explorer and Power gives nothing. No usual green light. Laptop doesn't detect anything. Nothing in device manager.
Today while going through the logs in the LGMDP folder I came across this.
<AppName>Log For Web DownLoad</AppName>
<TIMESTAMP>20090908235324</TIMESTAMP>
<Date>2009-09-08</Date>
<Time>23:53:24.-473</Time>
<IMEI></IMEI>
<TIMESTAMP>20090908235324</TIMESTAMP>
<RESULT>FAIL</RESULT>
Notice there's no IMEI number? Could this mean anything?
ibanezman192 said:
Very strange problem!Maybe your battery is dead Take out the battery and connect the mobile with the pc.If nothing happens then it is not a battery problem.Have you tried a correct hard reset?By saying correct, I mean holding the 3 buttons for many time until the leds flash and then flash out.Then you must release the buttons.
Click to expand...
Click to collapse
I do not think this has to do with IMEI.Maybe you have lost your IMEI in the flashing process.But I believe your phone is dead/bricked
I really cannot feagure out any other suggestions.Maybe you should take it to LG Service.
ibanezman192 said:
I do not think this has to do with IMEI.Maybe you have lost your IMEI in the flashing process.But I believe your phone is dead/bricked
I really cannot feagure out any other suggestions.Maybe you should take it to LG Service.
Click to expand...
Click to collapse
OK thanks ibanzeman. I think i will just let the ks20 go and buy a new phone.
Anyway its old already, and i think i bricked it. Thanks for your assistance anyway!
ryanswj said:
OK thanks ibanzeman. I think i will just let the ks20 go and buy a new phone.
Anyway its old already, and i think i bricked it. Thanks for your assistance anyway!
Click to expand...
Click to collapse
I'm sorry I couldn't help you, good luck finding a new phone!
thanks man. i will give this guide a go!
ibanezman192, thanks a lot for this very detailed guide!
hibjibis said:
thanks man. i will give this guide a go!
Click to expand...
Click to collapse
spuke said:
ibanezman192, thanks a lot for this very detailed guide!
Click to expand...
Click to collapse
The pleasure is all mine New version of the guide is coming tomorrow
erm.. can someone help? my computer doesnt seems to recognise my KS20 during Emeregency mode
I have same problem. On Win 7 64 bit, LGMDP do not see KS20.
What is the message that appears?
Link don`t work
Hi,
I try use the link for download the archive, but the link dot work....
You can fix this??
Thanks
PS: sorry for my english, but i am not very good in this language
hello this is my first post in this forum and I hope you accept me as friends on this section of HTC Touch Diamond
.. I have a HTC Touch Diamond P3700 ( new) and since yesterday he cannot be Started on .. and I tried several solutions (reset ....) but no result
Could you provide me a solution Please
My Greetings
Aziz
Nice use of font colors. Unfortunately the same cant be said for your phone. Whats your location and from which (country) did you buy your touch diamond from
Just be patient and listen ayyu3m to explain you and he will help you 100%.I have more worst problem than u have
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​
newlead said:
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​
Click to expand...
Click to collapse
Okay. So what exactly did you do or what exactly happened to your phone?
man did ya try to charge it? maybe the bettray is dead and can ya load the boot screen u know just press the down volume button and reset see if u can see the three colors screen if its then dont worry ... worst thing is just re-flash the rom PM me for extra help buddy
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
lexxa v said:
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
Click to expand...
Click to collapse
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
ayyu3m said:
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
Click to expand...
Click to collapse
I live in Roumania and bought the phone from someone and i don't know where did he get it from... but when i tried the official htc suport they said that my phone was made for Czech Republic and that's why my ROM update doesn't work...
The answer to second question is that i don't know
Can someone help me please? I don't know what to do now...
Btw the person from whom you bought the device is a resident of Romania?
Yes, he is.
okay can you go into bootloader mode and tell me everything on the screen
DIAM100 MFG 64G
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
USB
thankx. thats all i need for now. let me try to come up with a rom for you...
btw did you have any carrier logo before you ran into this problem...i mean like instead of the orange logo did you have any vodafone logo or just the htc logo during start up
AND do you have a front facing camera for video calls?
I had only the htc logo at start-up and i do have a video camera front facing.
Okay i found your stock ROM.
Do exactly as i say....
go to this link and scroll down to bottom...
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2
when you go to the bottom of the page, you will be requested to enter ur SERIAL NUMBER which you just found under your battery.
Enter and press submit.
now select the file Windows_Mobile_6.1_East_Europe and start downloading...
let me know if the download has started also
I started the download ...
Okay good. So once the download complete you are ready to flash...
This is how to flash...
1. Put ur device in bootloader mode again.
2. Connect the device to ur PC
3. RUN the downloaded file....and press NEXT NEXT NEXT....
Reply back if the flashing process is goind smooth or even if you face any problem...
Then i can finally go and sleep
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.