Related
is anyone know where can i buy the program in uk i did try in handango but they said not for sell in this country.thanks
It is not posible outside EEUU, I asked handandgo by email and answer it was forbiden by Microsoft.
Try Fonix software it works really well.
www.fonix.com
Cheers
If you have an XDAII, then you can get a fully working version of it with the official o2 UK 1.72 upgrade. I don't use it very much as I always feel an idiot saying the name, then normally having to confirm it before dialing, when I can just as easily go into speed dial or call history etc.
However, when I have used it it works a treat.
Cheers
Anthony
I use Fonix in the car all the time and its works great for me.
I found that Voice command recognised the contact I wanted 95% of the time, but then didn't recognise me saying 'yes' to confirm it.
In my case, Fonix does not always recognize my 'NO' command... :S
But still it's a great contender for MS VC....
By the way, is there a way to avoid Fonix to change my microphone AGC setting? It always changes it to AGC OFF, thus the recognition gets affected drastically, however when AGC is ON I get 98% success rate!
TIA,
Rayan
what version of Fonix voice dial are you using. I used the first version with my XDA1, this worked wonderfully.
I have found that the 2.0 version doesn't have a UK voice (the us ones are a bit odd). In addition i have noted the recognition does seem poor and it doesn't repeat the contact, just says "your contact"!!
Any ideas / help always welcome!
voice commands
hi,
you don 't really have to buy this software, you can download it probabely from following site: www.suprnova.org
I'm using the latest version (2.0)...
The weird thing is that it does not always change the AGC Setting...
I have not found a pattern, it seems more like random...
:roll:
There are alot posts and threads about SIP calling with a trinity and none of the conclude, Is there anyone that works on fixing the issue with sip internet calling for trinity ?
I speak of the issue of not hearing the other recipient.
OR is anyone that has installed a rom with WM6 on a trinity and SIP works fine for him ?
firiel said:
There are alot posts and threads about SIP calling with a trinity and none of the conclude, Is there anyone that works on fixing the issue with sip internet calling for trinity ?
I speak of the issue of not hearing the other recipient.
OR is anyone that has installed a rom with WM6 on a trinity and SIP works fine for him ?
Click to expand...
Click to collapse
Well my friend I have had a similar problem, but when I replaced the dll file as it was mentioned on the specified thread....with Resco explorer (could not do it with the standard file explorer of windows...), it worked OK. Sometimes however you have to try a couple of times to get a clear line, but I think this is an issue of the traffic you have on your WiFi ( I only use it with WiFi..). Also the voice you listen back is a bit faint, but with the headset you get in the purchase box of the P3600, problem is solved. Follow the instructions as they say and you will be fine!
SIP works fine for me, except for the fact that there's just not enough bandwidth for clear ulaw, and we need g729 or gsm for any kind of viability...
I've noticed the in call volume is very faint as well to the point of being unusable...
Is there a registry hack we can apply to change this?
Using Mun.s TE. CHeers
I'm not sure but I read through these threads:
http://forum.xda-developers.com/showthread.php?t=299950&highlight=voip
http://forum.xda-developers.com/showthread.php?t=303493&highlight=voip
Is there a seperate WM6 VOIP cab available somewhere? I don't see the suggested files, so I assume that I don't have it on my WWE WM6 rom.
Try search for VOIP...or look through todays postings for the same question:
and try these two posts
http://forum.xda-developers.com/show...highlight=voip
http://forum.xda-developers.com/show...highlight=voip
A quick search for VOIP will give you same answers
epmulligan said:
Try search for VOIP...or look through todays postings for the same question:
and try these two posts
http://forum.xda-developers.com/show...highlight=voip
http://forum.xda-developers.com/show...highlight=voip
A quick search for VOIP will give you same answers
Click to expand...
Click to collapse
Well, as you may have noticed I've found those threads, but I saw that the most of the thread is regarding HERMES.
I was wondering if anyone with an Artemis has been able to turn on VOIP (native voip)
I did manage to install the package as mentioned in the threads above, as well as put in the right config files. Also, the "Internet Calling: Available" today plugin is correctly displayed. However, I cannot switch dial pads and I don't get the correct status (connected).
Same problem here
Setup was done with Sip Config Tool 2.0.1
The plugin is configured : "Always, if available"
When connected by wlan or activesync the plugin displays : "Kein Empfang"
Disconnected from network displays : "Available"
Hopefully someone can help me
Guys I've got it working just fine on an xda orbit. There does seem to be a little bug though and that is when it's says "Searching" and "Available" on the today screen. Available actually means searching and searching means available
When searching is displayed, click on it in the today screen and you might notice a slight change in the signal which means it has switched to voip rather than gsm. Go to the phone screen and you'll see that the network has changed to your voip provider and any call you make will be routed through them.
I have downloaded sjphone yesterday and configured it to use my sip voip provider and it works brilliantly. The sound quality in sjphone is absolutely brilliant compared to the native voip, you should try it.
Finally it's working...
I tried to deinstall the plugin and after prompting an error it worked
The homescreen plug signals "searching" but as you said before it means "availabe". There are still a couple of things:
1) no incomming calls... i can't find the stun settings
2) +4930xxxxxx format doesn't work, i've to type 030xxxx
3) doesn't work after standby
Which version of sjphone are you using? There seems to be nothing available for wm 6
Hi BlueD,
I'm glad it's working for you. I tested incoming calls and that worked nicely as well without configuring any stun. The voip I used were sipgate and callcentric.
There's a post somewhere on one of the big voip threads and the guys managed to customize the dialing plans so that you can dial without using the international format. Do a quick search on voip dialing plan and you should find it somewhere.
Well obviously it doesn't cause the wifi disconnects, hence making it only useful for dialing out rather than receiving calls, except ofcourse if you want to leave the device on all the time, but that's not a very feasible solution.
The sjphone I downloaded was the one for v.1.60.303c Pocket PC 2003SE, it works nicely with excellent call quality. I also think you don't really need native voip capabilities to run that, which makes me think we could have had this on WM5 hmmm...
OK.. just fyi - i got a little bit more success in using the native VOIP solution. I had to flash from the WWE 6 to the BnB 2 ROM, then install the VOIP.cab and SipConfigTool. Now i can receive calls, but cannot place any... not sure why. Also, when i receive a call the sound is CRAP.. probably some codec issue here.
What type of internet connection have you?
Have you open ports on your router necessary for SIP, inbound and out?
epmulligan said:
What type of internet connection have you?
Have you open ports on your router necessary for SIP, inbound and out?
Click to expand...
Click to collapse
Yep I did. I got this confirmed by testing it with a softphone on my PC, which works great (same voip provider etc).
Hi all,
I bought this smartphone and want to use VOiP with sip server in WiFi. I installed the cab WM6VOIP and after reboot today screen shows me Internet call: blocked service.
So, I think my mobile operator made some kind of block. What you guys recommend to use it for unblock this ?
Thanks very much,
Mauricio
just post in Kaiser FOrum... there you'll get help!
Actually you probably won't. I must have posted 5-10 questions since registering and not one has been responded to.
Good luck though!
i had a tytn in the past...
i can remeber that there are some sip settings to set befor it works...
the voip cab is only to enable the features...
just search for voip in tytn forum.. maybe you find there something!!
The reason for this thread is to help people get Skype working to its fullest extent and resolve some of the issues. The ultimate objective is to allow those with Skype subscriptions to get unlimited anytime calling across North America if they pay the $2.95 / month for the Skype plan and have unlimited data...
Download Skype 3.0 for Windows Phones here:
http://www.skype.com/intl/en/download/skype/windowsmobile/
It installs fine and theoretically works great, however, there are a number of issues:
1. Skype automatically routes all audio to the speakerphone.
To route the audio to the earpieces, install audioRoute from Teksoft:
http://teksoftco.com/storage/download.php?product=audioroute_ppc
This product is discussed here:
http://forum.xda-developers.com/showthread.php?t=495166
It essentially installs an icon in your taskbar that loads when the phone starts up. Once you open Skype, you click the icon, select the first icon, which is the earpiece, and then all audio will get routed to the earpiece when using Skype.
To route the audio to a Bluetooth headset, then install A2DP toggle from Teksoft:
http://teksoftco.com/storage/download.php?product=a2dptoggle
This program should theoretically allow you to select the Bluetooth headset when Skype is loaded. It should theoretically be able to be loaded concurrently with audioRoute. I have not tested it fully.
2. Skype will not work unless connected to a wifi connection
I had tested Skype and thought it worked flawlessly until someone with an iPhone mentioned that he had to install some sort of program to "trick" Skype into thinking it was connected to a Wifi. I believe that this is an issue with the way Microsoft has designed Windows Mobile, but is probably intential to prevent competition for telecommunication company voice packages. This issue supposedly does not exist with Windows Mobile clients.
Just ensure that ActivSync/Wifi/Mobile is enabled under the Connection settings.
3. Skype Mobile does not support video calling
I'm not sure if this is a software issue or just something that can be hacked. I see no reason why this functionality would be disabled in the Mobile version of Skype... any insight would be appreciated.
Would love it if anyone else is experiencing problem 2 as well... I want to find out if it's isolated to my handset... or even to just my carrier.
slaman said:
Would love it if anyone else is experiencing problem 2 as well... I want to find out if it's isolated to my handset... or even to just my carrier.
Click to expand...
Click to collapse
No problem here on a Vodafone TP2. Skype uses the 3G connection fine.
You know that htere's a setting that tells Skype what connection(s) to use? It defaults to "Use ActiveSync/Wifi" but can be changed to "Use ActiveSync/Wifi/Mobile"
It was working for me I think
see the message below
It was working for me I think
Maybe I'm misunderstanding the question, but I have made calls through Skype on my TyTN II using the Australian Three 3G network. Called my wife on her mobile in Shanghai with no problems. Well, the connection was pretty horrible (I think it's a bit hard work for both the phone and the network) but it connected fine for as long as I wanted.
As tjobbins said, in the Connection Method settings, I can "Use ActiveSync/WiFi" or "Use ActiveSync/WiFi/Mobile"... so if I'm overseas, I leave it on the first one; in Australia on the second one.
skippinshanghai said:
Maybe I'm misunderstanding the question, but I have made calls through Skype on my TyTN II using the Australian Three 3G network. Called my wife on her mobile in Shanghai with no problems. Well, the connection was pretty horrible (I think it's a bit hard work for both the phone and the network) but it connected fine for as long as I wanted.
As tjobbins said, in the Connection Method settings, I can "Use ActiveSync/WiFi" or "Use ActiveSync/WiFi/Mobile"... so if I'm overseas, I leave it on the first one; in Australia on the second one.
Click to expand...
Click to collapse
Interesting... I think my settings might have changed because I tested it again just now and it worked!
Thanks all!
I'm interested in how this works. I own the Titan at the moment and Skype only works over Wifi. Do you know if Skype plans on fixing the problem with calls only being heard from speaker phone? Any update on video calling?
off-topic question here, does anyone know if the titan operates on 3G? (i have sprint)
jtadeo said:
I'm interested in how this works. I own the Titan at the moment and Skype only works over Wifi. Do you know if Skype plans on fixing the problem with calls only being heard from speaker phone? Any update on video calling?
Click to expand...
Click to collapse
We can only hope. Skype have their forums and I saw a number of posts complaining about those missing features. I guess we should add our voices, though I would expect it will take a while for it to be fixed; the current version for Windows Mobile, Skype 3, was released fairly recently.
One alternative to look at is Fring. It supports better audio routing, i.e. calls are not only on speakerphone - they can come through the normal phone earpiece, or a bluetooth headset. Don't think it does video. As well as Skype, it also supports MSN, ICQ, Yahoo, AIM and others, so it's a good all-in-one client.
However on the TP2 Fring does currently have one quite annoying issue - it doesn't seem to work on Wifi. It's fine on mobile/3G connections, but on Wifi it won't list access points or connect. This is reported on their forums but no sign of a fix yet. Actually I did once get it connect to WiFi, but I don't really know how and haven't been able to repeat it.
Oh I just remembered the other huge problem with Skype for Windows Mobile - it doesn't list your phone contacts!
Bloody useless when you want to make a Skype Out call, and you end up having to go into the contact record, copy their number, and then paste it into Skype. Really daft.
Fring does list your contacts, and you can use it for Skype Out as well as Fring's own paid-for outbound dialling system.
I have another problem: NO notifications! So i don't know if someone chats or phone me! It's useless in that way!
tjobbins said:
Oh I just remembered the other huge problem with Skype for Windows Mobile - it doesn't list your phone contacts!
Bloody useless when you want to make a Skype Out call, and you end up having to go into the contact record, copy their number, and then paste it into Skype. Really daft.
Fring does list your contacts, and you can use it for Skype Out as well as Fring's own paid-for outbound dialling system.
Click to expand...
Click to collapse
Thanks for the suggestion. I want to make sure that I'm using only data-only when making calls, since I have unlimited data... and limited daytime voice minutes.
I installed fring, and it doesn't show the TP2 as a supported device. When I launched it, it kept asking me to find a WLAN... except nothing shows up on the list! Wifi is enabled AND data is enabled, and it keeps showing Not Available...
Has it worked on your TP2?
slaman said:
I installed fring, and it doesn't show the TP2 as a supported device. When I launched it, it kept asking me to find a WLAN... except nothing shows up on the list! Wifi is enabled AND data is enabled, and it keeps showing Not Available...
Has it worked on your TP2?
Click to expand...
Click to collapse
Nope. See my post before the one you quoted! It doesn't work on WiFi on the TP2 at the moment - and also on some other WM devices I think.
Works great on 3G and ActiveSync, just doesn't work on WiFi.
Except.. once for me it did. It suddenly connected and I don't know how or why. Haven't managed to repeat it yet though. But maybe there's a workaround lying in there waiting to be (re) discovered
tjobbins said:
Nope. See my post before the one you quoted! It doesn't work on WiFi on the TP2 at the moment - and also on some other WM devices I think.
Works great on 3G and ActiveSync, just doesn't work on WiFi.
Except.. once for me it did. It suddenly connected and I don't know how or why. Haven't managed to repeat it yet though. But maybe there's a workaround lying in there waiting to be (re) discovered
Click to expand...
Click to collapse
No no - I had wifi disabled and just tried to use regular data connection... but it couldn't find the connection for some reason.
Hate to bump an old thread... but I finally got Fring working on my TP2 (latest version), but SkypeOut calls don't actually direct to the Earpiece... I don't hear anything. Loudspeaker works fine.