Develop Bugs

manila contact list shortcut

Hi,
Does anyone know how create this shortcut?
I presume it would go something like \windows\manila.exe --switchtopage manila://xyz.page
but run out of ideas to test...

Manila://people.page should do the trick.

Kork said:
Manila://people.page should do the trick.
Click to expand...
Click to collapse
That's the favourite people page, I meant the full contact list when you press the left soft key on the favourite people page.
Anyone?

That would be "\Windows\poutlook.exe contacts"

Kork said:
That would be "\Windows\poutlook.exe contacts"
Click to expand...
Click to collapse
And that's the WM builtin Contacts app.
I'm after the one that you get when pressing "All people" on the people tab and your own contact card is the first one in list.

Any updates?

have you tried \Windows\addrbook.lnk (LNK)
greetz

LRC said:
have you tried \Windows\addrbook.lnk (LNK)
Click to expand...
Click to collapse
This is the WM builtin contacts app, too.
I'm looking for the manila all contacts page.

Hi!
Have you find a solution to this? I would like to make a link to the Manila all people page as well.
Regards,
PK

paalkr said:
Have you find a solution to this? I would like to make a link to the Manila all people page as well.
Click to expand...
Click to collapse
Not yet, unfortunately.

Found the answer, should be anyone interested:
\Windows\manila.exe --switchtopage Manila://people/browserlayer/peopleAll.page

bolasz said:
Found the answer, should be anyone interested:
\Windows\manila.exe --switchtopage Manila://people/browserlayer/peopleAll.page
Click to expand...
Click to collapse
Did it work for you? It took me to the front layer of the peoples tab.

Yes.
Does it not work for you?
How did you try?

Well i tryed "\Windows\manila.exe --switchtopage Manila://people/browserlayer/peopleAll.page"
Which didn't work for me.
I got an error like "No certified appliction" or somthing like that.
Then i used "Manila://people/browserlayer/peopleAll.page"
And that one worked for me.
My rom is 1.19.404.1 build 51489 NLD

manila://people.page -> followed by a the string that presses the contact list button maybe? I'll check even deeper.

Internet Tab Config and Reg Edit for Tmobile TP2

Hi Guys, my first post here.
Just wanna say thanks to all the contributors/posters and this is the best forum for touchpro 2 configuration.
Last night, i spent 4 hours trying to figure out how to configure the Internet Tab on the Tmobile TP2.
After hours of searching through the forums, i finally figure out what needs to be done. However, i bet alot of people have trouble looking for these links.
So i decided to put all i had learnt in one thread and hope everyone can follow this.
Unfortunately due to me dozing off and my pc shutting off, i was unable to save all the posts and their contributors, so I apologize for not giving any credit but I assure you that i am not taking any credit for this post.
All Tmobile TP2s comes loaded with IE and Opera. I prefer Opera myself and I want Internet Tab to launch everything in Opera.
This is what i did...
1) Download Registry Editor (you can google it or go to this linklink
2) (this was quoted from the thread)
navigate to HKCU/Software/HTC/Manila
change value in DefaultBrowserIsIE from "1" to "0"
change value in Internet.SetOperaForeground from "0" to "1"
Registry Edit tutorial thread
For Internet Tab Configuration.
This was a little tricky for me, but looking through the posts helped clued me in on what to do.
1)You need to find a xml file located in the following:-
\Application Data\Manila\InternetPortal-en-us.xml
Some people may able to edit this file on their phone, but i prefer to make a copy and put it on my pc so that i have a few backups.
2)Make sure that the Readonly option has been unchecked for this file.
3) You will see the following when you first open the file for edit. (use notepad)
<?xml version="1.0" encoding="utf-16"?>
<InternetPortal>
<BrowserExe>\Windows\iexplore.exe</BrowserExe>
<IncludeUserFavorites>False</IncludeUserFavorites>
<Banner
DefaultImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner.qtc"
SelectedImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner_selected.qtc"
Text="Launch Browser"
NavigateUrl="http://m.web2go.com"
UrlText="web2go"
Width="480"
Height="215" />
<OperatorLinks>
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc" />
<Link
Text="CNN"
NavigateUrl="http://tmobile.cnn.mlogic.mobi"
ImagePath="\Windows\_Bookmark_icon.qtc" />
<Link
Text="ESPN"
NavigateUrl="http://m.espn.go.com/wireless/index?z=TM"
ImagePath="\Windows\_Bookmark_icon.qtc" />
<Link
Text="Facebook"
NavigateUrl="http://m.facebook.com"
ImagePath="\Windows\_Bookmark_icon.qtc" />
</OperatorLinks>
</InternetPortal>
4) Remove the line <BrowserExe>\Windows\iexplore.exe</BrowserExe>
This will now launch the lower left Bookmarks and lower right browser in Opera. (this is only possible, if you have already edit the registry in the previous tutorial)
Replacing the tag <BrowserExe>\Window\iexplore.exe</BrowserExe> with <BrowserExe>\Windows\Opera9.exe</BrowserExe> only launches the "Earth" tab in Opera but the tabs will not be launched at all, not even in IE. Don't know why this happens. You can even edit the Banner tag so that it doesn't go to the web2go website by modifying the NavigateUrl to "" or whatever you want.
5) Adding/Removing the Push Tabs.
Look for the tag <OperatorLinks>. you will notice that the three "permanent" tabs are located here. You need to remove the tag <Link> in order to remove them
For example: I don't want the facebook Tab on this screen. So I remove the whole tag
<Link
Text="Facebook"
NavigateUrl="http://m.facebook.com"
ImagePath="\Windows\_Bookmark_icon.qtc" />
You can add more Tabs accordingly by following how the previous link tags are.
6) You can also use your opera bookmarks to show up on this screen by replacing/modifying this tag
<IncludeUserFavorites>False</IncludeUserFavorites>. Set the False to True, and you will now be able to use all your Opera Bookmarks on this tab. This does include the pre configured Tmobile links. I got around this by removing the Tmobile links or place them all in a new folder. This is easily editted by going through Opera Browser.
Opera Browser Configuration
Look for the following files in your TP2
\Windows\Opera9\opera.ini
\Windows\Opera9\opera1.ini
1) Allowing more browser tabs in Opera.
Open up opera.ini and look for "Maximum Allowed Tabs"
You can change 2 up to 17. I can't find the thread for this configuration.
2) I got rid of all the url references to tmobile and even made sure the regular options point to www.google.com so that the browser loads up faster.
I know there could be more configuration that i may not have found yet, but this is the most basic i could do get the Internet Tab working like how it was supposed or how i want it to be. Still can't figure out how to make Push Internet work however.
Please use this thread to post other threads or even new ideas on how to configure this tab.
Enjoy and good luck !

Great info here...I also spent a lot of time solving this problem too, but I found one other thing with my T-Mobile Touch Pro 2 that's definitely important to note...
btong1978 said:
...
For Internet Tab Configuration.
This was a little tricky for me, but looking through the posts helped clued me in on what to do.
1)You need to find a xml file located in the following:-
\Application Data\Manila\InternetPortal-en-us.xml
...
Click to expand...
Click to collapse
My phone definitely has this file. It also has the same file located at "\Windows\" with the same name as above, but also in: \Windows\27c65cbd_manila
After finally finding the registry key to disable IE from the internet tab, I methodically checked each of these files for which one my system was actually using...and it turned out to be the *_manila file.
Just to be thorough, I made sure to keep all copies on my phone identical, just to be safe, but this may be helpful if it still just doesn't work for some reason.

Thanks for the info guys, I will look into this as soon as I get my TP2 back up again.

This path doesn't exist on the TELUS version:
\Application Data\Manila\

Thanks a lot! These configs work really well!

slaman said:
This path doesn't exist on the TELUS version:
\Application Data\Manila\
Click to expand...
Click to collapse
Does the Telus version have IE as the default browser?

elazullizard said:
Does the Telus version have IE as the default browser?
Click to expand...
Click to collapse
Unfortunately, this thread is for the Tmobile version, if anyone has any idea where this would be on the Telus, please feel free to post. I don't know of the telus version though.
Thanks !
Bernie

Worked very good, thanks very much! Although, in this section: NavigateUrl="http://m.web2go.com"
UrlText="web2go"
I put Google for the UrlText and it didn't show up, oh well, I don't mind it too much.

Yeah that's strange.
I was able to put Launch Browser in the URL Text, and it worked....
As long as it is still launching google, that is all that matters right ? hehehe
Try a soft reset.... that may work. Or, go to another tab and then return to the Internet tab to get it refreshed from the XML that you had modified.

nuron said:
I put Google for the UrlText and it didn't show up, oh well, I don't mind it too much.
Click to expand...
Click to collapse
I put Google in mine and it worked like a charm. No reset required. I used Notepad on the PC side to do it.
If anyone is finding they can't see the file from Windows, go to your Folder Options and uncheck "Hide protected os files"
Thanks btong1978, this post was really helpful. I banged my head on this for days. It's crazy that T-mobile would believe that everyone would want to go to CNN and ESPN. No offense to fans of these sites, but I have better things to do with my mobile browser, like movie times and wikipedia.
Another tip for people using these instructions. Change
Width="480"
Height="215"
to
Width="240"
Height="107"
or even smaller to get more bookmarks on your screen. With Height="60" I was able to get 5 bookmarks to show beneath the logo without scrolling.
Also, the <IncludeUserFavorites>True</IncludeUserFavorites> works for IE as well, so change-away.

Epiktetus said:
Also, the <IncludeUserFavorites>True</IncludeUserFavorites> works for IE as well, so change-away.
Click to expand...
Click to collapse
Oops, while the bookmarks will be launched in IE, they are actually managed in Opera. No biggie, at least I don't have to edit the XML file again.

WOW Thank you very much!!!

Epiktetus said:
Oops, while the bookmarks will be launched in IE, they are actually managed in Opera. No biggie, at least I don't have to edit the XML file again.
Click to expand...
Click to collapse
THanks for the compliment on your other post ! I was just as much frustrated on how to change the internet tabs. Good thing i was running high on energy drinks that night. LMAO.
the previous quote may be due to the reg edit that i posted earlier. I haven't tried this yet, but if you switched the values in these .....
change value in DefaultBrowserIsIE from "0" to "1"
change value in Internet.SetOperaForeground from "1" to "0"
It might end up taking the IE bookmarks instead. I don't know tho.
I also had a problem of the bookmarks launching in IE instead of Opera, but when i removed the line
<BrowserExe>\Windows\iexplore.exe</BrowserExe>
It will launch the bookmarks on the tab in opera.
I also found another trick that if you make this line instead....
<BrowserExe>\Windows\OperaL.exe</BrowserExe> , it will launch the bookmarks in Opera if you didn't edit the registry just yet. However i can't verify this, since i made so many changes in the registry that i couldn't keep up with what changes i made.

btong1978 said:
Unfortunately, this thread is for the Tmobile version, if anyone has any idea where this would be on the Telus, please feel free to post. I don't know of the telus version though.
Thanks !
Bernie
Click to expand...
Click to collapse
I'm just saying that if the Telus version doesn't have IE as default, then there really shouldn't be any problem. But as the_sys0p said, it's really the manila file that determines all the defaults.

Thank you!
Thanks for this thread. Here is some related info that I got from this post:
http://forum.xda-developers.com/showthread.php?t=542113
How can i change the search engine in the internet tab?
Use a registry editor and add/modify the following key (the one below is the standard search engine - Google)
[HKEY_CURRENT_USER\Software\HTC\Manila]
"InternetSearchUrl"="http://www.google.com/m?source=mobilesearchapp&v=1.0&aq=f&q=%s"
I don't need the search bar in the internet tab, how can I disable it?
Use a registry editor and add/modify the following key (standard = "false")
[HKEY_CURRENT_USER\Software\HTC\Manila]
"DisableInternetSearch"="true"

why the hell couldn't i find this post when I was trying all of this? I actually had like 4 different threads up that had all this info scattered. Anyway, I actually made a cab that'll do all of this.
http://forum.xda-developers.com/showthread.php?t=550647

btong1978 said:
Hi Guys, my first post here.
For Internet Tab Configuration.
This was a little tricky for me, but looking through the posts helped clued me in on what to do.
1)You need to find a xml file located in the following:-
\Application Data\Manila\InternetPortal-en-us.xml
Some people may able to edit this file on their phone, but i prefer to make a copy and put it on my pc so that i have a few backups.
2)Make sure that the Readonly option has been unchecked for this file.
3) You will see the following when you first open the file for edit. (use notepad)
Click to expand...
Click to collapse
I don't know why, but I'm unable to open the file on my PC, and I can't edit this on the phone. Can you help me with that? I opened OneNote on the phone, pasted the xml, did my changes on there, but have no idea how to change the xml file in the \Manila\ folder.
I'm pretty much stuck on this...

open the xml on your computer with Notepad. then move the file back to your phone through Active Sync

xnifex said:
open the xml on your computer with Notepad. then move the file back to your phone through Active Sync
Click to expand...
Click to collapse
It won't let me access the xml on my computer. Notepad can't access it for some reason.
EDIT: Nevermind! I did a soft reset on my phone, resynced it to my computer and now I accessed it. Thanks for your contribution xnifex.
And of course, thank you very much btong1978!
Now is there a way to make Skyfire the default browser in the Internet tab? I'm starting to like it more than Opera.

Great Post!!
I used the info from MattandTracy to do a lot of tweaking, but the part I couldn't find out was how to change the Internet default browser.
I edited the .xml page to tell it to look for Skyfire, instead of IE (or Opera) and I set Skyfire as the default browser when it asked me to. I then customized the Internet Page (It's now the "InterWeb" page) and I customized the push pages and added one of my own. It still kept bringing up IE.
Thankfully, you identified where in the registry to go and stop this! Now, it brings up Skyfire, and I can go to whatever page I want to.
I also edited the other push pages using the .xml page, so that they go to the sites' actual mobile page, with no reference to T Mobile. Really speeds things up!
Thanks so much. You really helped me out.

Id caller, Name display

My carrier has the extra option that the incoming caller will get his : Name and NUMBER displayed on my phone EVEN if it is not in my contact list.
Anyone had any success of having this work on the TP2
I am paying for the option but it does not work on my TP2. Only number shows on the incoming caller. Not both name and Number.
AGAIN, I repeat. YES, BOTH name and NUMBER SHOULD show on my screen even if the caller is not on my contact.
Any help please.

bteljuice said:
My carrier has the extra option that the incoming caller will get his : Name and NUMBER displayed on my phone EVEN if it is not in my contact list.
Anyone had any success of having this work on the TP2
I am paying for the option but it does not work on my TP2. Only number shows on the incoming caller. Not both name and Number.
AGAIN, I repeat. YES, BOTH name and NUMBER SHOULD show on my screen even if the caller is not on my contact.
Any help please.
Click to expand...
Click to collapse
Cool...I've never heard of that as a carrier-available option! What provider do you have?

I believe that Rogers in Canada also has this option but it only works for phones that are locked to their system. It does not work on my Tilt2. One of the "benefits" of buying an overprices, out of date phone from them I guess.

I have seen something similar when someone calls me from a local Manulife office. The call shows "MANULIFE" (or MAUNLIFE due to a typo error by the operator) instead of the number.
No subscription from me required though

InRBigness said:
I believe that Rogers in Canada also has this option but it only works for phones that are locked to their system. It does not work on my Tilt2. One of the "benefits" of buying an overprices, out of date phone from them I guess.
Click to expand...
Click to collapse
Yes Exactly. This option is available by Fido/Rogers.
I am paying for it, but i cannot use it for some reason. I was hoping to find a software that will allow me to do so.
Maybe if we tried to revmove the (+1) for all incoming calls, i think it would work. What do you guys think?
Any help regarding this matter guys?

anyone? Help?

Take a look at this post/thread: http://forum.xda-developers.com/showpost.php?p=5701643&postcount=8
It works, partly. Hopefully someone will be able to fully figure it out.

bteljuice said:
My carrier has the extra option that the incoming caller will get his : Name and NUMBER displayed on my phone EVEN if it is not in my contact list.
Anyone had any success of having this work on the TP2
I am paying for the option but it does not work on my TP2. Only number shows on the incoming caller. Not both name and Number.
AGAIN, I repeat. YES, BOTH name and NUMBER SHOULD show on my screen even if the caller is not on my contact.
Any help please.
Click to expand...
Click to collapse
no problem bteljuice...the answers are found here & here.
peace...

da9th_one said:
no problem bteljuice...the answers are found here & here.
peace...
Click to expand...
Click to collapse
What are you talking about? If you have nothing to contribute, please don't post.

He is referring to the multiple posts. It is not necessary to post the same question in every thread on the forum.

splayer7 said:
He is referring to the multiple posts. It is not necessary to post the same question in every thread on the forum.
Click to expand...
Click to collapse
I agree with you. Not necessary to post in multiple threads. However, it is also not necessary to make sarcastic posts like the previous poster either. A PM would have sufficed. Now there is a string of 3-4 useless posts because someone thought that a sarcastic remark would be clever...
Anyway, back on topic. As per the link in my post earlier in this thread, it does seem to work with the default WM dialer, just not with the HTC dialer (at least not fully). I would tend to think that the cab in the other thread is missing a registry edit to allow it to work in the HTC dialer. Unfortunately, I'm not bright enough to figure out which one it is.
The cab makes these 4 edits (related to CNAP):
<characteristic type="HKLM\Drivers\BuiltIn\RIL">
<parm name="Dll" value="rilphone.dll" datatype="string" />
<parm name="EnableRogersALM" value="1" datatype="integer" />
<parm name="EnableRogersCBM" value="1" datatype="integer" />
<parm name="EnableRogersCNAP" value="1" datatype="integer" />
I've also seen this one referenced as well on a different thread:
characteristic type="HKLM\Software\HTC\RIL\RILConfig" translation="filesystem" >
<parm name="EnableSpnOnsEonsFeature" datatype="integer" value="64" />
I haven't tried applying that one yet.
One thing is for certain, the rilphone.dll from the Rogers Diamond is a requirement.

efrant said:
What are you talking about? If you have nothing to contribute, please don't post.
Click to expand...
Click to collapse
april fools....bwahahahahaaaa...

TF3DBeta3 :: Panel?

Hi all,
I have just download the lastest Manila TouchFlo3D Beta 3. But I wonder why TF3D_Panel installer is not working.
Then,
I tried to make HTML code (to make it as panel) but it's not working. It just give me a white screen.
can anyone who expert in HTML correct the right code for me?
Here is the code that I made:
Code:
<html>
<head>
<meta http-equiv="refresh" content="60;URL=\Windows\manila.exe">
</head>
<body>
</body>
</html>

There is already a NewSensePanel by... I don't remember, but he made two types. Each has their drawbacks, but search for it.
HTML Panels had fairly significant shortcomings and I don't recommend them for what you are trying to do.

Hannigan174 said:
There is already a NewSensePanel by... I don't remember, but he made two types. Each has their drawbacks, but search for it.
HTML Panels had fairly significant shortcomings and I don't recommend them for what you are trying to do.
Click to expand...
Click to collapse
Thank you Hannigan174, for your response.
I found the file here:
http://forum.xda-developers.com/showthread.php?t=639663
I've not tested yet. Maybe next holiday time, I will.

Thanks Too!
Thank you to both of you. Needed this solution also. It's great!

[Q] How To Disable Re-Save for APK Templates?

Hi everyone. I have been getting tips from this forum for quite some time now, so I thought it was best to join the forum. I am uncertain how to disable Re-Save for APK templates. Does this have to be done within Zooper Widget Pro or Eclipse? Thanks in advance!

Future_Tech said:
Hi everyone. I have been getting tips from this forum for quite some time now, so I thought it was best to join the forum. I am uncertain how to disable Re-Save for APK templates. Does this have to be done within Zooper Widget Pro or Eclipse? Thanks in advance!
Click to expand...
Click to collapse
That has to be done in Eclipse. Check the screenshot to Step 7 in this guide : http://forum.xda-developers.com/showthread.php?t=2594973 There you can see the structure of the zooper.xml, which has a member called zooper_pack_allowsave. Setting this to 0 will block users from saving modified widgets from your pack.

kwerdenker said:
That has to be done in Eclipse. Check the screenshot to Step 7 in this guide : http://forum.xda-developers.com/showthread.php?t=2594973 There you can see the structure of the zooper.xml, which has a member called zooper_pack_allowsave. Setting this to 0 will block users from saving modified widgets from your pack.
Click to expand...
Click to collapse
Thanks for the quick response. Worked! Is it possible also make bitmaps, text, weather, etc disabled from editing? If so, how? Thanks!

Future_Tech said:
Thanks for the quick response. Worked! Is it possible also make bitmaps, text, weather, etc disabled from editing? If so, how? Thanks!
Click to expand...
Click to collapse
No, the user will always be able to edit the widget. He just can't save the edited version as a template.

kwerdenker said:
No, the user will always be able to edit the widget. He just can't save the edited version as a template.
Click to expand...
Click to collapse
Great, thanks. I have one last question. Within the zooper.xml I add a description and author name, but on Zooper Widget Pro, my template appears with its icon but the name of the template is still called Sample Template Pack with the description still saying "Pack Description". I am obviously doing something wrong, but I can't figure out what though.

Future_Tech said:
Great, thanks. I have one last question. Within the zooper.xml I add a description and author name, but on Zooper Widget Pro, my template appears with its icon but the name of the template is still called Sample Template Pack with the description still saying "Pack Description". I am obviously doing something wrong, but I can't figure out what though.
Click to expand...
Click to collapse
Did you already read through the whole tutorial I linked to earlier? It explains all the necessary steps in detail

kwerdenker said:
Did you already read through the whole tutorial I linked to earlier? It explains all the necessary steps in detail
Click to expand...
Click to collapse
I'll take another good look at the tutorial, hopefully I can find what I am doing wrong. Thanks again!

kwerdenker said:
Did you already read through the whole tutorial I linked to earlier? It explains all the necessary steps in detail
Click to expand...
Click to collapse
I am still getting this problem. In the strings.xml I change >Sample Template Pack< to >FUTURE_TECH Theme< and add a description, but in my templates list it is still appearing as Sample Template Pack and the description is still "Pack Description". The only thing that appears correctly is the ic_launcher icon.

Future_Tech said:
I am still getting this problem. In the strings.xml I change >Sample Template Pack< to >FUTURE_TECH Theme< and add a description, but in my templates list it is still appearing as Sample Template Pack and the description is still "Pack Description". The only thing that appears correctly is the ic_launcher icon.
Click to expand...
Click to collapse
Then your probably didn't edit the appropriate values in the zooper.xml (again, see Step 7 of the linked tutorial). If you edited strings.xml but it shows up in the list as "Sample Template Pack", make sure zooper_pack_name is set to @string/app_name, as shown in the screenshot of the tutorial.