Related
I use the Bluetooth connection between the HTC and the Parrot and it works just fine in my car…. As far as the phone hand-free functions are concerned.
When I installed TomTom (ver. 6) on the HTC I assumed that the voice of the navigator would also come out through the car speakers connected to the Parrot.
This is not happening! The phone conversations are going through the Parrot and INDEPENDENTLY the TomTom voice comes out of the HTC!
This creates quite a mess when I am driving (while TomTom navigates) and I get a phone call: TomTom keeps on talking over the phone conversation and most of the HTC screen is covered by the “incoming phone call” notification!
Moreover the ringtone of the HTC does not seem to work when connected to the Parrot and only a very feeble chime is there to signal an incoming call.
Does anyone have a solution to fix this inconvenient situation?
Thanks in advance for the insight!
I've got the same setup as you and have the TomTom voices coming out of the phone which has been the same with my previous phones such as the SPV C550 and he HTC wizard. I think it's down to the bluetooth stack implementation on the Windows Mobile phone. My mobile mutes TomTom when I am in a call and I get a flashing mute icon shown on the TomTom screen.
One thing to try is the Jetware bluetooth extension http://www.jetwaremobile.com/ which is designed to improve compatability with the Parrot systems. It will certainly help you get the correct ringtones through the speakers, though I'm not sure if it will help with TomTom voices.
Neil
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Thanks guys
Sorry I have been so busy lately I barely logged in the Forum. Just wanted to let you know that I have seen your replies and will look into the solutions you suggested. THANKS.. will get back to you soon with (hopefully positive)feedback
Vaguely related and possibly usefull information here:
http://www.modaco.com/Guide-to-usin...oneer-Bluetooth-Car-Stereoand39s-t252613.html
hotatomic said:
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Click to expand...
Click to collapse
Thanks hotatomic! I have installed that appz and it works!!! Great tip!
Any other useful tools for the P3300 we could exchange?
Cheers!
SiperX
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
-TXTman can't capture sms
-AE Button Plus broke "end call" key when i remapped it to end programs
-Replacing IE_Short.lnk with task manager command causes internet explorer to open simultaneously with task manager
yeah no threaded sms programs will catch the messages. that's my only gripe right now.
So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry
aauspitz said:
So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry
Click to expand...
Click to collapse
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J
countfloyd said:
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J
Click to expand...
Click to collapse
I've run an Application Unlock on my S620 and I've managed to install Blackberry Connect but, like you, not getting any mail.
I've given up and gone back to the German WM5 rom. After a couple restarts of the device, the blackberry connet top banner doesn't even show up on homescreen anymore!
I'll wait till rim gets their act together on WM6.
J
Hmm...I am going to give this another try.
I realized that I couldn't get emails on my device, even after putting the WM5 rom back on, because I hadn't sent a "service book" from rim's blackberry site. That did the trick. Gonna, reload WM6 and give it a shot!
J
Bah, no luck getting this thing to connect or run reliably let alone get emails...
how do i go back to my original .. windows mobile 5...
if anyone is using WM6 on the Dash...
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
and if it does change it to "headset" automatically could you please tell me if you are able to change your profile to "normal" while the bluetooth headset is still connected
Thanks in advance
streetx613 said:
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
Click to expand...
Click to collapse
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc
McHale said:
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc
Click to expand...
Click to collapse
well yeah it would seem that way but when i have my bluetooth headset connected... sometimes i want my phone on silent/vibrate and other times i want it to play sounds, and i hate having to go and edit the headset profile manually to do this, just changing the profile would be a lot more convenient.
I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc
McHale said:
I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc
Click to expand...
Click to collapse
no for bluetooth, you can't change your profile unless you disconnect the headset
I noticed that none of the MSN pre-installed software that was part of WM5(MSN IM, Hotmail access, etc) is on this version. When I attempt to set up my messaging to receive hotmail, I get an error stating: "could not find pmsnlauncher". I've looked around and found a download of the pocketMSN software, but it must be 'activated' for ~$20. It does mention (msn website), however, that if the software is 'pre-installed' no activation is necessary. This leads me to believe that the MSN software is simply not part of the BETA rom.
Anyone else notice this? Any thoughts?
msn is now windows live.
jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
uhhh... tpc works just fine for me... i'm using 2.0 beta 4 of tpc, but other versions should probably work as well. make sure your phone is completely app unlocked, or you will have problems. that includes the 0000101b policy entry in the registry.
i'm the creator of tpc, so if you have questions about it feel free to message me.
does "right menu" work on WM6?
Sling player works with WM6 beta
jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
I found this over at the sling community forum. I can confirm that it Sling player mobile is now working with the install of the DLL only cab auto install.
Use the link below and go to the March 10, 2007 post by wpbear.
http://www.slingcommunity.com/forum/thread/18903/Windows-Mobile-6.0-incompatible/
Hi there I'am new here.... seached the forum and google a lot but didn't find an answer...
Just flashed from XDALive 2.0 to Black 2.0, radio 1.38.00.10 and HardSPL v6 with help of the manual of mrvanx.
My problem with the rom of XDALive 2.0 was that TomTom 6 keep hanging serveral time. The headset (bluetooth build in CAR, peugeot 207) was working perfectly. After the upgrade to Black 2.0 the TomTom problem was solved , it works perfectly now. The only what came up was the bluetooth headset probleem. The connection is ok but I don't hear any sound??
Flashed back radio ROM to 1.35 no results...
Found something interesting...
When its not connect with the carkit, turn on bluetooth, dail a numbers and turn on the Speaker, it will eventually connect to the carkit automaticly (and I got sound thourgh the carkit!
When searching for bluetooth devices it will find the headset and the carkit goes into 'calling mode'. When dailing a contact directly after that the carkit will work. But the next try it will mute the radio but doesn't give any sound on the carkit.
When allready connected with bluetooth on the carkit it wont give any sound thourgh it.... strange.. Tried serveral other ROMS but they are giving me the same problem...
Widcomm BT Stack (http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72) also tried, didn't help... anyone some suggestions?
PS.: My old nokia still works, it can't be the carkit..
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
jcb_home said:
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
Click to expand...
Click to collapse
When searching for a new bluetooth device WM6 sees a headset and the connection is successful. The 'Set has headset' is availible and is set. The option Wireless Stereo isn't support I think, its not availible as an option.
When calling you can turn on/off your headset back to the phone. That works but there is still no sound on the headset.
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Same problem with HS850
simon_darley said:
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
Click to expand...
Click to collapse
I have exactly the same problem, and I didn't solved yet....but I've found this bypass:
When the phone rings I answer with the bluetooth handset and receive the beeb on connect call.....then I close the BT headset and as soon as I re-open it, I have the headset working.....I have to do this for every incoming or outgoing call.
My BT headset was working well with the black 1.2.
This is the only issue I've found in the black 2.0.....I think is the most stable and fast rom.
Bye prengo.
jcb_home said:
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Click to expand...
Click to collapse
My other Bluetooth devices are working fine. My bluetooth GPS receiver works just fine with TomTom... no issues there.
Just flashed back to XDA-Live (v0.20.1) and the headset works without any problem.
Only thing now is Tom Tom 6 hangs directly after the start of it. Anyone familiar with this issue?
thx
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
A common thread seems to be the HS850
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
cruzer said:
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
Click to expand...
Click to collapse
WMXL .20 is based on a beta WM6 build and Black 2.0 is built on an RTM build (non-beta)
With Moto HS850 too.
edwinyuen said:
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
Click to expand...
Click to collapse
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
mike6502 said:
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
Click to expand...
Click to collapse
It's great that you tracked this down so specifically. I guess this means for those of us with these issues, we have to avoid newer WM6 builds until someone looks into this.
idee2000 said:
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
Click to expand...
Click to collapse
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
rabdo said:
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
Click to expand...
Click to collapse
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
AdamsJourney said:
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
Click to expand...
Click to collapse
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Hi,
I am using radio rom 1.40.30 and Black 2.0.
I am using H700 BT headset
the problem i face are opposite from you all.
If i am already talking halfway and i flip the boom to continue talking with the BT headset...it won't work.
if i receive a call and I flip the boom while the phone rings, it is ok and i can even press the button on the h700 to answer the call.
Radio 1.40.30 seems to connect with the BT headset much faster.
last time when i was using my previous default factory rom, when i flip the boom while the phone is ringing, it will take ages to connect
why not u guys try radio rom 1.40.30 also
rabdo said:
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Click to expand...
Click to collapse
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
edwinyuen said:
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
Click to expand...
Click to collapse
Sorry, what I meant is that perhaps Cyberon Voice Commander is 'fixing' the issue on my system, rather than saying MS VC 1.6 was causing the problem. Next time I hard reset I will test my headset BEFORE installing cyberon software
Ok I'm still having this problem and this is what I have tried so far:
I downgraded to XDALive v0.10 and my BT worked, but no WiFi
So I upgraded to HardSPL v6, then installed the 1.40.30.00 Radio rom, and then went back to Cingular Black 2.0, WiFi back but no BT unless headset is activated after call is initiated.
Installed Cyberon Voice Commander, didn't effect anything, still no BT
Removed Cyberon Voice Commander and re-installed MS VC 1.6 installed all the hacks and still no audio in the headset.
So it looks like it is something in the ROM that is killing the BT functionality. Maybe because the XDALive is based on a beta WM6 and the Black is based on a full version?
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike
vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz
Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!
Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok
Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker
i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks
Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.
how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate
Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.
i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?
Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.
Hello all, well recently I bought some Sony DR-BT20NX headphones under the impression they were the best, so onto the problems:
I'm using leos latest 0.5AKU WM6 Rom and when using them with the default Rom the bluetooth headset can control the music that is pause etc but the music plays for 1 second if that at the beginning of the song then its interference. Any ideas?
Using the Broadcomm stack included in the Rom that you can install after seems to sortany bluetooth problems involving audio but destroys the GSM and the radio crashes 9/10times on boot forcing a soft reboot.
Secondly I'm using on my PC/Notebook with a "Integrated System Solution Corp." Bluetooth dongle with BlueSoleil software provided, with this im able to control WMP like on my device, but I don't even get the second of audio - its completely dead audio wise apart from a dull hiss.
So after paying £60 I'm none the happier with bluetooth
Any help would be appreciated, thanks!
Ok quick update, bluesoleil version 3.2 fails miserably at audio.
Using 5.0.0.0 now and it works.
Whats annoying is I have to pay for this update because they gave me effectively crippled software.
Ok so thats the PC side sorted, just WM6 to go.
Edit:
My USB stick came with version 2.x of the drivers, and when upgrading to 5.x it says the BDID of the bluetooth is already registered. Duh It came with 2.x, oh damnit now I can't get 5.x. Why would a company not want my money
spicypixel
Have you tried only WMP or other players on your Uni? Try CorePlayer and PocketMusic, they also support AVRCP.
P.S. Using a HBH-DS970, no problems with sound... Only problems with WMP sometimes
Had the same issue....installed Jetware Mobile's Handsfree extension and it works flawlessly!!! I use it on my Jabra BT8010 and its the best buy i've ever made!!
dreamtheater39 said:
Had the same issue....installed Jetware Mobile's Handsfree extension and it works flawlessly!!! I use it on my Jabra BT8010 and its the best buy i've ever made!!
Click to expand...
Click to collapse
Jetware causes skips for me
Skwyk said:
Jetware causes skips for me
Click to expand...
Click to collapse
Do this and it will work just fine -
1. Install JET ware.
2. Start the utility, go to advanced options and check all relevant ones
3. On the main screen, click on "Turn on bluetooth". If it is already Checked, uncheck it and then re-check the option
4. Soft reset (Use PSShutXp or something which does a software reset. do not use the hardware reset button)
5. After restarting, make sure you freshly pair up your headset (Delete the previous partnership on your uni, and also do a factory reset on your headset)
6. Once paired, it should work just fine.
let me know if it works...also make sure you use the latest version (v1.31 i guess)
-San
Import this reg file...
Hi,
Import this .reg file, and it should work fine ;-)
San
dreamtheater39 said:
Hi,
Import this .reg file, and it should work fine ;-)
San
Click to expand...
Click to collapse
will this fix work for a uni with wm5
R 1.09.00
G 42.42.p8
D 1.30.107.wwe
Also if someone could point me towards an explanation
of what these mean cause yes im a nab/nube