When you turn off the phone option, it will turn on again if its done within 5mins, but it wont turn back on if you leave it off for lets say 30mins. You need to soft reset it for the phone signal to be enabled again.
Is this a common prob with the BA and is there anyway to fix it, Im using wm6. Also enabling the wifi conn takes quite a few attempts after a soft reset.
Hi,
for Wifi, I'm also experiencing the same thing when activate wifi via comm manager.
I thought it may be the ROM that is unstable or have some bugs. I'm myself using WM 6.1 made by xplode.
May be you can try to activate wifi via Start->Settings->Connections->Wifi
If I activate wifi via Start->Settings and so on, I didnt need to do soft reset, the wifi just run fine. Try it. Hope it helps
it seems like a battery problem. i had that problem before, it got fixed when i bought a new battery.
I was thinking that it may be a batt prob.
Yes both are commonly problems
i had both from wifi and softreset with that stupid button and the phone off on... jajaja don t worry is normal to our old darling...
Selling a few batteries if your interested.
http://forum.xda-developers.com/showthread.php?t=497241
Related
Hi
I have Black 3.01 which work well except for one annoying problem.
When in an area of no signal it constantly turns on. As soon as I turn it off, on it comes again.
It's not activesync (I've done fake server trick)or any other software I've installed. I've not got it set to auto attach to GPRS/G3. I've looked in the notification queue and running programmes. I can't see anything that is causing it. If I turn the radio off, it stays off.
Any idea's
This is driving me nuts.
Could it be the radio version?
This was happening to me for a while and I think I traced it back to a weather program constantly trying to do updates. But it was never clear, so I did a hard reset, reinstalled everything and the problem went away.
Yes, I considered that. However I've got everything disabled that might try to connect. And it only happens when there is no signal.
But I might have to do as you did and hard reset and re-install one programme at a time.
Unless someone else has a clue?
This has happened to me several times on black 3.0. Not sure what is doing it - I have no programs installed that would be attempting to wake up the device or to connect to a data network....
I don't understand what is wrong with my phone.
When i enable wifi, my phone connects to the network and then the phone turns off. Sometimes it makes it to internet explorer and then it turns off.
I dont understand, calls work, music works, the phone stays on. but when i enable wifi, the phone just shuts off.
what could be the problem.
First I would try different roms (kavana, rose, official, etc) and see if it's a software problem.
If all the different roms has the same problem then it might be your battery. Put the battery on a flat surface and spin it. If it spins then the battery is bad.
Evi1d33d said:
First I would try different roms (kavana, rose, official, etc) and see if it's a software problem.
If all the different roms has the same problem then it might be your battery. Put the battery on a flat surface and spin it. If it spins then the battery is bad.
Click to expand...
Click to collapse
way to mock a guy that is having problems...or maybe not mocking but lack of help....I have the same problem with every single rom I have tried...even back to official....wifi "driver is not loaded" i've tried everything....I was putting 6.1 rom on a friends dash, I have it on my shadow and it didn't break my wifi, but I can't get it to work on the dash....i'm glad i switched to the G1....i would imagine I just need to find a regestry string or some cab file to enable the wifi driver...I can't get the wifiinit.exe thing to work...IDK anymore..i wanna give up and give it back to him and be like..hope you didn't like the wifi feature...
If you can connect via wi-fi then it shuts of when open up IE or even just connected via wi-fi the chances are your battery is cuput as the phone will use more mA when using wi-fi.
pychobj2001 said:
way to mock a guy that is having problems...or maybe not mocking but lack of help....I have the same problem with every single rom I have tried...even back to official....wifi "driver is not loaded" i've tried everything....I was putting 6.1 rom on a friends dash, I have it on my shadow and it didn't break my wifi, but I can't get it to work on the dash....i'm glad i switched to the G1....i would imagine I just need to find a regestry string or some cab file to enable the wifi driver...I can't get the wifiinit.exe thing to work...IDK anymore..i wanna give up and give it back to him and be like..hope you didn't like the wifi feature...
Click to expand...
Click to collapse
How am I mocking him? Dash is known for having battery issues that shuts off the phone randomly. Most of the time it's because the battery is dying or bloated. If it's bloated then you'll be able to spin it on a flat surface.
The whole spinning thing now makes sense, it just sound crazy.....sorry about that....I think I need to start a new thread on my problem...I got a new wifiinit.exe and everything and still no wifi...
I didn't even realise different people lol
thats what mine kept doing..it is in fact the battery. when mine first started doing it, i took a volt meter to the battery and got very inconsistent readings. when i replaced that battery and tested the new one, it was very consistent. this happened to me 3 times and i finally threw the excalibur in the crap box and got a new phone.
the problem only happens when a load is put on the phone..such as wifi. it will idle fine, but even still, the battery life will suck and most likely your battery meter on the phone wont be accurate.
could be a memory issue. How much free memory do you have?
Hey everyone,
I am having an issue with my TP2.
Occasionally after calls the phone will turn itself off and a message pops up on the screen saying "a wireless radio must be attached to use the phone."
Then about 30 seconds or so (sometimes longer) it will pop back on and be ok.
The happens roughly 3/5 calls i take.
it is annoying, any ideas how to sort it out?
omggg i thought i was the only one...
and sometimes i cant get back to get any
service i have to soft-reset the phone..
is ANNOYING.
yea i have had to soft reset a couple times!
I have installed SPB mobile shell 3 and S2u2 unlocker thing.
Also Garmin Mobile XT.
Dont think any of these should cause any issues, but might help.
i bet the problem comes in S2u2
bcuz i didnt have this problem, it started
after installing S2u2.
interesting.
II have just uninstalled S2u2 and soft reset. i will see what happens.
any news ?
Yea sorry,
have been busy.
'
Well since uninstalling S2U2 i have stopped getting this issue, so thats good.
Guess it must be caused by it.
however it is frustrating without the lock program, and the other few lock apps i have tried are **** in comparison.
So i dunno if i will just install it again and put up with it or what.
it is pretty frustrating man.
Definately send your devices back from wence they came if a hard reset doesn't fix the issue
thedudelasse said:
Definately send your devices back from wence they came if a hard reset doesn't fix the issue
Click to expand...
Click to collapse
It is the S2U2 that was making it happen.
after i uninstalled it, then it didnt happen anymore.
Just to be clear, its not the device turning off, just the phone component.
i Download the HTC Fuze ROM Update- Version 5.11.502.2 WWE
after i flashed it and booted it, initial setup was taking place... it said it was setting up touchFLO. everything looked good.
until...
it just rebooted!
and it keeps cycling that way. it never gets to load windows.
i have read that other people have been having trouble with touchflo after the update... but now i cant even get windows to load.
ive been trying to find solution all day. about 15 hours. i cant even flash another rom into it. i cannot hard spl. anyone?
try hold volume down + softreset, connect usb, then install stock rom (original rom)
Do u have a Fuze or a Diamond??
Fuze roms are for Fuze devices, Diamond roms are for Diamond devices only.
And you´re in the Diamond section.
You should check that.
i cannot find the original stock rom. htc.com does not have it. i also tried searching. there was a post in which a guy had the same problem. he was directed to a S.E.A. WWE ROM. i also downloaded it and gave it a try but i got an "invalid vendor id" error. i think that means i must hard spl. but i CANT. it hangs at 0%. and i cant sspl manual. cuz i cnt even boot into an OS.
yea, i have a FUZE. i am aware that fuze roms are for fuze devices and diamond roms are for diamond devices. since i have not been successful in flashing my fuze with stock OR updated rom from htc (mainly since i cannot find the stock rom,) i am trying to flash it with ANY compatible rom.. i just need this phone working at LEAST so i can boot to an Operating system.
i am stil searching and searching for a stock rom for this fuze.... because that seems like it is my only sure bet. if anyone already knows or can point me in another direction, that would be great. i will be contacting htc rightnow.
I do not know if this was your problem, but I realized that whenever I try to flash a new rom with usb devices connected on pc, the process stops. my luck that I did before hardspl
try this link
and this
try:
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
http://rapidshare.com/files/157242627/RUU_Raphael_Cingular_US_.exe
http://forum.xda-developers.com/showthread.php?t=439346
do not forget to do the next time hardspl
hi
hi did you check the wiki? http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs has all the stock roms for xdas, this link is for the touch pro, fuze raphael whichever >.>.
yes, i did check the wiki.. for each of the att roms, it says i need spl 1.90. i have the stock spl 5.10. i dont think i can flash those roms. i have been running thru so many threads, i am just about overwhelmed
marcolero, thanks for those links. it looks like that is what im looking for (http://rapidshare.com/files/157242627/RUU_Raphael_Cingular_US_.exe)
sounds like thats it. thanks. i will try that now.
good luck, hope it works!
it worked. thanks alot
but it did not solve my initial problem... the reason why i flashed it in the first place.
my htc fuze did NOT resume from standby. this problem started suddenly one day. after the backlight dims after 30 sec, and then the lcd turns off after 1 min, pressing the power button did not wake my phone up. i was, however, able to turn the volume up and down, and heard the notification sounds.
since i could not manually hard reset my phone (the reset button did not work when pressed with my stylus) i decided to update my phone with the rom provided by htc website.
flashing was successful, but my phone kept rebooting before it loaded windows.
so now i had another problem. i couldnt even hard spl, or load any other rom. but thankfully, after much confusion and help from you guys, i found the stock fuze rom
after i flashed my phone with the rom you guys provided, i still had the problem in which my phone would not wake up after standby.
it turned out that getting a new sim card fixed my problem.
kinda makes sense... well, somehow... because i read that another guy in this forum solved HIS problem by messing with the phone settings. (choosing gsm or 3g instead of auto)
i wonder if i should make another thread for this problem and its solution. bah....
i wonder how many people have sent in their phone for repair when the solution was as simple as this. i myself, thought my lcd was damaged. becuase my phone got wet couple months ago and smudged the screen. on top of that, this phone was bought refurbished. heh... what a dilema.
thanks all
Hi that was me that solved my Standby of Death problem by changing phone band option from AUTO to 3G only (also works if set 2G only from auto)...
Its good to hear that you also solved your Standby of Death problem but by changing SIM, this doesn't surprise me, did you also change provider or was it just a faulty sim?
I don't think a change of SIM would benefit me as I had the problem with my old SIM (I don't think my SIM is faulty per se not if they are all like that) besides changing the band setting from auto to either 3G only or 2G only works for me and I'm happy with that. If I didn't have a working solution I would def try changing SIM however and I don't want to discourage doing that.
Also I would only get the Standby of Death 2-3 times a week which coinceded with being in a weak 3G area (where the phone might auto switch bands) it didn't happen as often as you had it. The problem is def connected to the SIM card.
Obviously everything I've written above only applies to those who have the Standby of Death because of the SIM or settings which impact the SIM, to rule out a software cause are best to start with a hard reset.
nlel said:
Hi that was me that solved my Standby of Death problem by changing phone band option from AUTO to 3G only (also works if set 2G only from auto)...
Its good to hear that you also solved your Standby of Death problem but by changing SIM, this doesn't surprise me, did you also change provider or was it just a faulty sim?
I don't think a change of SIM would benefit me as I had the problem with my old SIM (I don't think my SIM is faulty per se not if they are all like that) besides changing the band setting from auto to either 3G only or 2G only works for me and I'm happy with that. If I didn't have a working solution I would def try changing SIM however and I don't want to discourage doing that.
Also I would only get the Standby of Death 2-3 times a week which coinceded with being in a weak 3G area (where the phone might auto switch bands) it didn't happen as often as you had it. The problem is def connected to the SIM card.
Obviously everything I've written above only applies to those who have the Standby of Death because of the SIM or settings which impact the SIM, to rule out a software cause are best to start with a hard reset.
Click to expand...
Click to collapse
i had sufferd from the same problem as u.
but my problem was,i downloaded a radio rom patch which was going to make my jamin from 2g to 4g.i tried to install it and it makes my cell dead.becus of low battery.once ur cell phone becomes failure during rom flashing it will not accept even charging.now condition was same when i turn my cell phone it comes just for may be few seconds and becomes down but red light turns on some times.there is a way.charge ur mobile battery using desktop charger and make it charge just for 45 minuts or ur baterry will blown up.after this connect ur phone with usb cable and starts upgrading again.it will prove helpful.thank u...
Hey guys maybe you know the solution..
A few days ago I updated the software via OTA.
F926BXXU1CVC5
since then I have had issues with the wifi. it kept turning itself off.
after a while I could not even turn it on without restarting.
now, I cannot re-enable it whatever I do... support said I should reset network settings but it did not solve..
on top of that, when wifi was enabled (when it still worked) and bluetooth as well and I opened the phone - it disconnected wifi and bt as well and kept wifi off.
the phone has heat issues, its not hot but very warm.
the battery life hasnt been great with this phone but now it is terrible.. accubattery says its 4000/4400 mah - and I can tell it cant stand a day even if I am not opening it up too much.
if you know the solution please help, also looking for a great backup methodology in case I need to return it (its under warranty)
thanks
Updates tend to break things...
Backup all critical data redundantly to hdds copy/paste. Do not rely solely on SmartSwitch to do so!!!
Try a factory reset, if that fails let Samsung sort it out. Take detail pics of the phone before boxing, double box and insured it if shipped.
will try, thanks!
factory reset did not solve the issue.. I have to send it back