i Download the HTC Fuze ROM Update- Version 5.11.502.2 WWE
after i flashed it and booted it, initial setup was taking place... it said it was setting up touchFLO. everything looked good.
until...
it just rebooted!
and it keeps cycling that way. it never gets to load windows.
i have read that other people have been having trouble with touchflo after the update... but now i cant even get windows to load.
ive been trying to find solution all day. about 15 hours. i cant even flash another rom into it. i cannot hard spl. anyone?
try hold volume down + softreset, connect usb, then install stock rom (original rom)
Do u have a Fuze or a Diamond??
Fuze roms are for Fuze devices, Diamond roms are for Diamond devices only.
And you´re in the Diamond section.
You should check that.
i cannot find the original stock rom. htc.com does not have it. i also tried searching. there was a post in which a guy had the same problem. he was directed to a S.E.A. WWE ROM. i also downloaded it and gave it a try but i got an "invalid vendor id" error. i think that means i must hard spl. but i CANT. it hangs at 0%. and i cant sspl manual. cuz i cnt even boot into an OS.
yea, i have a FUZE. i am aware that fuze roms are for fuze devices and diamond roms are for diamond devices. since i have not been successful in flashing my fuze with stock OR updated rom from htc (mainly since i cannot find the stock rom,) i am trying to flash it with ANY compatible rom.. i just need this phone working at LEAST so i can boot to an Operating system.
i am stil searching and searching for a stock rom for this fuze.... because that seems like it is my only sure bet. if anyone already knows or can point me in another direction, that would be great. i will be contacting htc rightnow.
I do not know if this was your problem, but I realized that whenever I try to flash a new rom with usb devices connected on pc, the process stops. my luck that I did before hardspl
try this link
and this
try:
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
http://rapidshare.com/files/157242627/RUU_Raphael_Cingular_US_.exe
http://forum.xda-developers.com/showthread.php?t=439346
do not forget to do the next time hardspl
hi
hi did you check the wiki? http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs has all the stock roms for xdas, this link is for the touch pro, fuze raphael whichever >.>.
yes, i did check the wiki.. for each of the att roms, it says i need spl 1.90. i have the stock spl 5.10. i dont think i can flash those roms. i have been running thru so many threads, i am just about overwhelmed
marcolero, thanks for those links. it looks like that is what im looking for (http://rapidshare.com/files/157242627/RUU_Raphael_Cingular_US_.exe)
sounds like thats it. thanks. i will try that now.
good luck, hope it works!
it worked. thanks alot
but it did not solve my initial problem... the reason why i flashed it in the first place.
my htc fuze did NOT resume from standby. this problem started suddenly one day. after the backlight dims after 30 sec, and then the lcd turns off after 1 min, pressing the power button did not wake my phone up. i was, however, able to turn the volume up and down, and heard the notification sounds.
since i could not manually hard reset my phone (the reset button did not work when pressed with my stylus) i decided to update my phone with the rom provided by htc website.
flashing was successful, but my phone kept rebooting before it loaded windows.
so now i had another problem. i couldnt even hard spl, or load any other rom. but thankfully, after much confusion and help from you guys, i found the stock fuze rom
after i flashed my phone with the rom you guys provided, i still had the problem in which my phone would not wake up after standby.
it turned out that getting a new sim card fixed my problem.
kinda makes sense... well, somehow... because i read that another guy in this forum solved HIS problem by messing with the phone settings. (choosing gsm or 3g instead of auto)
i wonder if i should make another thread for this problem and its solution. bah....
i wonder how many people have sent in their phone for repair when the solution was as simple as this. i myself, thought my lcd was damaged. becuase my phone got wet couple months ago and smudged the screen. on top of that, this phone was bought refurbished. heh... what a dilema.
thanks all
Hi that was me that solved my Standby of Death problem by changing phone band option from AUTO to 3G only (also works if set 2G only from auto)...
Its good to hear that you also solved your Standby of Death problem but by changing SIM, this doesn't surprise me, did you also change provider or was it just a faulty sim?
I don't think a change of SIM would benefit me as I had the problem with my old SIM (I don't think my SIM is faulty per se not if they are all like that) besides changing the band setting from auto to either 3G only or 2G only works for me and I'm happy with that. If I didn't have a working solution I would def try changing SIM however and I don't want to discourage doing that.
Also I would only get the Standby of Death 2-3 times a week which coinceded with being in a weak 3G area (where the phone might auto switch bands) it didn't happen as often as you had it. The problem is def connected to the SIM card.
Obviously everything I've written above only applies to those who have the Standby of Death because of the SIM or settings which impact the SIM, to rule out a software cause are best to start with a hard reset.
nlel said:
Hi that was me that solved my Standby of Death problem by changing phone band option from AUTO to 3G only (also works if set 2G only from auto)...
Its good to hear that you also solved your Standby of Death problem but by changing SIM, this doesn't surprise me, did you also change provider or was it just a faulty sim?
I don't think a change of SIM would benefit me as I had the problem with my old SIM (I don't think my SIM is faulty per se not if they are all like that) besides changing the band setting from auto to either 3G only or 2G only works for me and I'm happy with that. If I didn't have a working solution I would def try changing SIM however and I don't want to discourage doing that.
Also I would only get the Standby of Death 2-3 times a week which coinceded with being in a weak 3G area (where the phone might auto switch bands) it didn't happen as often as you had it. The problem is def connected to the SIM card.
Obviously everything I've written above only applies to those who have the Standby of Death because of the SIM or settings which impact the SIM, to rule out a software cause are best to start with a hard reset.
Click to expand...
Click to collapse
i had sufferd from the same problem as u.
but my problem was,i downloaded a radio rom patch which was going to make my jamin from 2g to 4g.i tried to install it and it makes my cell dead.becus of low battery.once ur cell phone becomes failure during rom flashing it will not accept even charging.now condition was same when i turn my cell phone it comes just for may be few seconds and becomes down but red light turns on some times.there is a way.charge ur mobile battery using desktop charger and make it charge just for 45 minuts or ur baterry will blown up.after this connect ur phone with usb cable and starts upgrading again.it will prove helpful.thank u...
Related
Hi, I have been messing around with this phone I got off ebay which was sold as faulty because "it kept restarting" of its own accord. I know a fair bit about this phone and how to upgrade/fix most problems but this problem is very unique and I certainly cant find anything anywhere else so good luck to anyone who thinks they can solve this one....
Ok... set the scene... After lots of messing around the current state of play is this. Without a simcard the phone works perfectly. i.e. switches on and does all the flight mode stuff you could ask it. Its perfect. However when you put in a simcard (any simcard) the phone still functions perfectly but with strange affliction that ANY button pressed makes the phone restart. That is- the touchscreen works as normal- so in theory you could use the phone without using the buttons (if you were mad!). Also, the current ROM and original ROM are T-mobile although because it doesnt ask for a sim unlock code when I put in an Orange simcard you would assume its unlocked already (I'll come to that...!). The Orange simcard seems to let the phone come on but never actually gets a signal (plus the button problem!). the T-mobile simcard works as normal but of course the buttons are a bit of a pain.
I have tried to reflash the phone with a standard Tmobile ROM which worked fine but gave the same problems as before (I suspect the seller on ebay tried something similar) and have searched through all forums etc for a simliar problem but no luck...
My Theory... I dont think this is a physical problem with the phone given the perfect operation without a simcard and almost full operation with one. The unusual network difficulty with the Orange simcard is what leads me to believe that it is problem with the SIM lock. I suspect that someone has entered the wrong SIM unlocking code (too many times perhaps) for this phone and thats why its behaving badly. What I was thinking about doing was entering the correct SIM unlock code (I have this) but as the phone never actually asks for the code; then I dont know how to do this! (perhaps there is a sequence of numbers/symbols which will activate this?). Alternatively I could try to re-establish the simlock for this phone and then enter the correct code when asked. Again, this is very unusual to have to do so theres nothing anywhere else about this problem
So any ideas on my theory- do you have any of your own???
Kudos, fame and my eternal gratification are up for grabs here!!!
Anyone? Any Ideas?
You could try a sim lock, or you could even try flashing one of the custom roms here. However, it sounds like a hardware issue...maybe the sim's circuitry is somehow shorting the circuitry for the buttons. Does the phone have any water damage? Have you opened it up to check?
Hi, thanks for your suggestion. I have tried to separate ROMs for the phone and that doesnt seem to make a difference. I know that the sim lock for the phone is not dependant on the ROM (or so I understand). The water damage theory sounds like an interesting one- it fits the symptoms. Not sure if it has suffered any symptoms. i'll have a go at opening it up and see what I can see. Assuming that might be the case- do you have any suggestions for the phone?
also, any idea how to relock the sim of the htc touch?
I would think it is more phone related issue therefore
1) change the phone Network settings to GSM instead auto or 3G.
2) try other Radio version:
furthermore if you plug the device to power does it still reboots?
Hi, tried to change the network settings (could only do this with my Tmobile simcard installed) but no change in the button problem. Also updated the radio version with no difference at all. I think this cud be a flight mode phone forever more!!!
also power from USB or wall adaptor makes no difference to the problem
Hello,
I have a strange problem with my HTC Artemis (O2 XDA branded, bought in Germany, no lock)
It behaves unstable and indeterministic.
Unstable means that it crashes/stucks or turns off.
Indeterministic means that it happens when i plugg it to charger, when i'm syncing, when a phone rings, when using applications/tomtom or just i arrive to work and i find the device off.
When it crashes or i find it off, the biggest problem is to boot the device. It takes me typically 10mins, when i'm always trying to press the power button, push the reset button or unplugg the battery for a while in random order until i bring it to work.
After first crach, the device also often crashes or stucks again during the boot process.
Once, the device was so dead, that it took me two days to bring it into bootloader mode and then i could at least flash the ROM.
All these was happening with ARTEMIS TOUCH 4.01 WWE - LITE NO CUBE.
Yesterday, i switched to ARTEMIS TOUCH 4.02 WWE - LITE NO CUBE (burned FW twice) without installing any other applications and the problems are still here
My personal feeling is that it is getting every week worser.
When i bought the device (eBay), there was original FW with Win Mobile 5 on it, i immediately flashed to ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device. So i flashed to 4.01 and this issue was away, but approx 2months ago, the above described behaviour has started and nowdays i'm fighting with it 2-3x a day.
so, can anybody help?
GiZMo
Similar here
I have a similar problem, what's really strange to me is, that as far as i can recall it started happening 2 months ago or so also!! weird huh...
my device simply reboots from time to time! even while i'm making a call.
the weird thing about these reboots is that when it comes back to live i do not have to enter my pin to enable the phone! everytime i perform a manual reboot (by software, using the pin or remove battery) i have to insert my pin to able to make a call...
i have upgraded from 3.01 full touch to 4.02 full touch about the time it started, i have now 4.02 vanilla touch but problem still occurs from time to time.
any ideas?
Im another one to join this boat!
Bought an MDA C 3, two days ago, bought of someone from gumtree.com.
Worked fine for the first hour, and then locked up - nothing on the screen, no LED. Only way to get it going was to remove battery and then press power button.
I upgraded the ROM from the original t-mob UK WM5 to mechles fine release: http://forum.xda-developers.com/showthread.php?t=371182
The lock-ups / crashes have now become rarer, on average every 4 hours (before was every 1 hour).
There is no pattern to them either, although I have saw the screen trun all corrupted just before it happens. The last one was caused when I pressed the 'start' button.
I'm on a T-Mob contract, and lost my Kaiser, got ripped of when I tryed to replace it by a tosser on here for $375 Thief on the loose thread, and was hoping my luck had changed when I bought this one!!
It is T-mob branded and I wonder if there isn't a fix on here, would T-Mob repair it under warranty??
same "issue" with no entering of PIN after reboot. But not always
GiZMoSK said:
ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device.
Click to expand...
Click to collapse
here i found a good description of that issue:
"
Originally Posted by lasertony
I've got the same problem as !Novy, but nobody seems to have noticed his question. Are there any other guys out there with this strange problem ? I have been using this rom for a while and sometimes, without any visual warning the phone freezes up. This is particularly ennoying because there is no way to check wether it is working or not. Every other function or software keeps working ! The phone is just not receiving any calls or sms. So you can miss an entire day of calls and sms without knowing... Only when trying to call somebody the dialer says 'Dialing...' and nothing happens. No connection.
A soft reset is needed to get the phone working again.
"
btw, now i'm again trying to turn the device on, it's again stuck. grrr
Hello,
i had a few weeks ago a similar strange behaviour.
After changing the sd-card I had problems to turn the device on. After a hard reset it began to boot but hang.
The I flashed back to original O2 ROM. Then I had a unpredictable behaviour. Somtimes no sound. Sometimes I cound not be called. Sometimes Error message "no sim card". After every reset i had an other error.
Hard reset and flashing was no solution. Removing battery for less than 4 hours has no effect.
Then I wanted to send it back for repair. I took of the battery. The next day I wanted to try a last time and surprise: The device works fine without an error. Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
regards
Andre
It is Happening to my device too!!
It stucks every 2-3 hours!Tried many of the cooked ROMs but nothing.Also tried all the radio roms for 1-2 days.still the same!
It stucks with no particular reason.SOmetimes in s2u2 sometimes when am receiving a call.... etc.
Had the pin problem too for 3-4 times!
I will try your sugestion ANDRE and we will see!
Also i will try flashing the original rom,cid unlock and then flash the cood rom twice!
Fingers crosed....
Andre1210 said:
Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
Click to expand...
Click to collapse
didn't help
happy u
now, i will try to flash back original german o2 rom
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
bricked or not?
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Vinnie1 said:
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
Click to expand...
Click to collapse
I thought it was a battery problem too, but I've 2 batteries and both are died in the same time? I think it's too strange...
My P3300 have this problem from when it is returned from assistence and with original firmware (without other applications).
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
GiZMoSK said:
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Click to expand...
Click to collapse
jahrami said:
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Click to expand...
Click to collapse
but i cannot get into bootloader mode so no flashing from SD card or PC
bricked device
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
GiZMoSK said:
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
Click to expand...
Click to collapse
the good sign are the leds that means you have a very good chance...the guy made the piont...check the wiki
random crashes are often caused by hardware malfunction...sometimes the connection on the motherboard stuck,get broken or make a short-circuit...so check the hardware
Hi my P3300 ( artemis) has suddenly startet to freze and or turn it self off, only thing that helps is to take out and replace the battery, i have read all topics i could find with simmilar problems, and i was hopping it was my battery that was going old so i bought a new one, but it didnt help.
i have tried diffrent roms wont help,
i tried to "push" the battery closer to the conectors, no help and it's seems like its hard or software problem but not battery.
some times when i turn the device back on with out replacing battery it works but sometimes when i do like that it gets to HTC page showing rom info etc. then it fades out and i can see blackscreen but it "glows" and the phone is dead nothing works.
i chaged the screen a couple of months ago but the fault dosent seems to have with the screen to do.
It seems that it is a hardware issue. They replaced motherboard for me, it is working now.
hmmm i have no warenty left. and my phone does look used so i guess im screwd?
sorry for that..
an issue happened with me witha nokia mobile before and when i sent it to be fixed they told me there was a problem in the radio chip or something like that..
so try to install a different radio ROM ... that's all i can think of.
and sorry for your loss
i will try that, but the problem ocured before i change radio last time....
hmmm
I changed back to original HTC wm 6 (swedish) yesterday and the phone worked all day, and i thought i have solved my problem, but whilst driving my car for about 15 min and the phone was in placed in the a space in the middle of the dashboard under the stereo i found out when i toke it back up to call that it was dead......so i was wondering could it have something to do with heat or lost GSM coverage (thinking i have multiple faults on my artemis)
htc arte100 freezes on startup
can any one give solution for my arte100 it freezes on startup
how can i restore or put it on bootloader mode in order to upgrade it
thanks in advance
for the boot loader see the WIKI
if your device is unlock flash it with any rim you want.. if not get the original ROM for your mobile and then flash it..
for flashing try using RUU or the SD card flashing..
all can be found on the WIKI
totally dead
now i cant start it again its dead as it can be?! i tried to have it with out battery over night, with battery and usb cable over nigt, old and new battery, usb from pc or from orginal AC adapter or waths it called.
it dosent light the "loding battery led" or nothing, i tried with sim in sd card out, sim AND sd out or both in nothing work i have open it and blew away all dust still dead?!
something i forgott to try?! or is this expencive toy gonna be a toy for my 8 month old kid?
Artemis goes Dead
I'm having the same problem, and have worked the same solutions. I noticed this started when I also had my phone underneath the radio in my car.
Replace radio rom
Upgraded rom to 6.1
New Battery
Unlocked Phone
Last attempt was uploading active sync 4.5 since loading version 6.1
I've got no solution yet, just posting to let you know we are in the same situation.
I have read about similar problems in different forums, and the conclusion is that it's a hardware issue. When I sent it in for support, they replaced the motherboard. I guess, there is something smaller wrong but they just replace it all.
No way.
Replaced battery, took out SIM and SD, changed ROM (finally it was long enough at life), but still:
Display freezes, turns white - game over.
I give up.
Until a few days ago I was very happy with HTC and my Artemis.
Artemis 110 (T-Mobile Compact iii) Back from the Dead
Artemis 110 (T-Mobile Compact iii) Back from the Dead, Flash via Active Sync then via SD Artemis
Since the XDA site is so valuable, I’m trying to consolidate my efforts to make a legitimate contribution to the site. Hopefully this post can also be of help to others.
These are just notes on what I’ve been through so far with my Mobile Compact iii. Hopefully, someone more advanced than I, will read through and possibly troubleshoot the errors I may have overlooked.
Upon returning from Germany, I needed to re-flash my ROM with an English version. Version of choice was the Blue & Black cube with WM6, thanks to the developer(s).
BLACK & BLUE v5.0 ROM WM6.1 CE OS 19716 ( Build 19716.1.1.0 )
First I used the USPL to temp unlock the phone
http://forum.xda-developers.com/showthread.php?t=311403
I then loaded the Operating Version, and received many stalls and stops via the White Screen of Death. (I have some theories on the white screen of death, but do not have the knowledge to confirm) I suspect utilities are running in the background and are being loaded. Impatience at this point could quite possibly be my nemesis
Second, I loaded the unlock to permanently unlock the phone.
http://forum.xda-developers.com/showthread.php?t=400445
I re-flashed my ROM again the B&B cube. Still the phone seemed unstable, was shutting down and getting the white screen of death. I hard booted the phone many times, soft booted, battery out, and through no tangible reason of thought, the phone just did what it wanted to. Start, not start, and hung up at various points in the boot process, died in the middle of Wal-Mart.
I tried the over-clock on WM6, using WM5 over-clocking. Talk about unstable. I couldn’t find and over-clock for WM6, but now know it is an option in the Blue and Black Rom. Anyway my phone went out completely. To the point of not being able to get past the initial flash screen where the OS and IS version displayed and that was it. Left the phone overnight, nothing.
In a last attempt, I used the SD mini flash option found in WIKI.
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
I used my printer SD card reader and the adapter supplied with the SD mini card. Home PC recognized the storage device, right click and format, then did the rename file (NBH file to ARTEIMG.nbh) as found on the WIKI SD Flash page. I initially tried without the format, and only got to the Red Green Blue (RGB) screen. Since I received no indication of status, I started over, formatted the mini SD, extracted the file to the SD, renamed, to ARTEIMG.nbh and I also extracted the B&B Cube WM6 Rom to the SD mini, for I found a couple of post indicating the ROM also needed to be on the SD. I followed the instructions, did the Boot-loader. (Power Button, Voice Button, and Rest with Stylus, release stylus, continue holding Power and Voice until upload prompt on the phone). I received the Update SD image, and followed the instructions. Here I got the prompts indicating status of uploads. OS 1 started to load, OS 2 loaded, phone when to RGB screen. I left the phone alone for 30 minutes at the RBG screen.
After 30 minutes, I rebooted the phone, and the phone went through setup and auto-detected my current carrier SIM card. Has been working for the past hour and 20 minutes.
Since the phone is running at the moment, I will wait and see. Next step is to load the original WM5 T-mobile version via active sync. If downloaded from the t-mobile site, the ROM update isn’t broken down enough to rename the NNBH file..
I’m also waiting to load a new radio version, for I’ve read that may be the cause of some of my problems.
Another theory I have is that T-mobile sent out kill phone code to stop my phone.
Any feedback from the Pros is very appreciated.
I have the same problem: Link to other thread
Apparently there are many devices with the same (more or less) problem.
I hope someone is able to tell what is malfunctioning....
My XDA Orbit went crazy today, first I couldn't start him at all, he wasn't react on "power button". After few attemts he finally started. I connected him to PC but he turned off after couple minutes. From this moment I can't start windows, it stops at starting screen (with IPL, SPL, GSM, OS). After a while screen starting to quakes (like a low frequency on CRT). I tried hard reset, it won't help and run it in bootloader mode but Orbit just reset.
Additonal info:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.67.90
OS 3.4.0.0
ROM: Original WM6 from O2
Can anyone help me?
Have you tried a different barttery?
No, I didn't. I don't know anybody with artemis to borow another battery.
EDIT: I checked battery voltage, it's about 3,85V and now i noticed something, on battery sticker is printed it is for ARTE160 3.7VDC-1200mAh but on the phone it's printed ARTE200 5VDV-1A. Is that can cause the problem?
Finally I forced it to run in bootloader mode and flashed with the same O2 WM6 ROM. He started and I was abble to flash USPL and other ROM. It's better but still sometimes phone just poweroff with no reason
flisak said:
Finally I forced it to run in bootloader mode and flashed with the same O2 WM6 ROM. He started and I was abble to flash USPL and other ROM. It's better but still sometimes phone just poweroff with no reason
Click to expand...
Click to collapse
Hi
Had a similar problem!!! Try reflashing the rom....It worked for me..I used the o2 stock rom found on the the artemis wiki in the ftp section.... Can also highly recommend the Touch rom found in the windows mobile 6 section of the artemis section here..
regards
Lohtse
I bought a new battery but phone still turning off and freezes. Now I can't even turn it on, sometimes it starts but screen slowly fades away and after few seconds its only black screen with black light. It's propably a hardware problem but what?
EDIT: I started it, working fine when it's connected with pc but when I disconnect it freezes after couple of minutes.
flisak
open the device and check the screen is connected propperly, piss easy, just be very carefull.
if this does not work buy a new LCD.
Hi, I have the same problem with my Artemis, did anyone find a solution? Can be a problem with the LCD?
And plus one here. The device always turn off, and is difficult to turn on again. Rplaced battery and is the same.....
I've got an XDA Orbit that periodically hangs (full black screen and occasionally this seems to drain the battery very quickly). I've taken it apart and reseated the connectors and these all look ok.
Seems to happen when you're taking it out of a pocket to answer a call etc. Sometime it just requires a soft-reset but occasionally it just doesn't respond. In these instances I have found that twisting it slightly across the diagonal (top left to bottom right bending back slightly) and then resetting the device seems to bring it back to life and it's ok for a few hour/days again. If I leave it alone, i.e. not in my jeans pocket - it's fine, so think it's hardware related but not sure which bit is faulty - screen, touch-screen, mainboard etc.
If I bend it the same as above when it's working the screen goes screwy and causes it to crash so think it's definitely this is what's causing the device to crash. However, the clock seems to keep going (I'm assuming so as in most incidents it doesn't seem to lose the correct time - although I might just be seeing the problem the instant after it has crashed) so don't know whether the mainboard is still ok.
Just thought it might help some if you try the slight twisting described above to see if that helps with these to get them working and if anyone has any ideas how I can work out which bit of mine is faulty I'd be grateful.
when I try to flash the ROM 6.5 for my HP3300 after 4% flashing it restrats again. Pls help me out. I think this problem might be with my Ext_ROM. How to unlok EXT_ ROM
what is the best touch rom to use for my xda orbit. and where can i get it
lohtse said:
Hi
Had a similar problem!!! Try reflashing the rom....It worked for me..I used the o2 stock rom found on the the artemis wiki in the ftp section.... Can also highly recommend the Touch rom found in the windows mobile 6 section of the artemis section here..
regards
Lohtse
Click to expand...
Click to collapse
what is the best touch rom to use for my xda orbit. and where can i get it
Well it seems that I'm having similar issues with my Orbit.
I've been having problems with it for a few weeks and they seem to be getting much worse now.
Occasionally it would just lock up and freeze, but after frantic tapping it will unfreeze itself and continue working fine. But over the past few days it's been locking up regulary. Removing the battery was the only way to get it going again.
But now it just won't do anytihing. As soon as I start it up I either get a white screen (it phases in during the splash screen), or it'll start up, freezes after a few seconds, then eventually switches itself off. Hard resetting it makes no difference at all. Changing the battery didn't work either. I always keep it on charge overnight, could that be the problem? Maybe I'm just overcharging the battery (if that's even possible).
Note: As I've typed this, I've switched it on again only to find the battery's flat, even though it's been off for most of the day (I gave up trying to start it up). The battery usually lasts for the whole day - maybe even 2 days if I don't use it much. I had it on charge overnight as I said.
I'll try another battery to see if that works. If not then what can I do?
I have this new T-Mobile Touch Pro 2. I currently have the Stock European ROM (6.5) on it. Before that, I was using the TMO 6.5 version. My problem is that the phone randomly freezes/dies/turns itself off while sitting idle. And every time it happens, I either have to soft reset it or take the battery out and put it back in to turn it back on. Simply pressing the power button doesn't do anything. Funny thing is that this phone is a replacement that was sent to me by T-Mobile because my first device was doing the same thing (which I had for about a month). T-Mobile tech support was just as lost as me. Can anyone here help me?
I have the exact same problem! Have you found a solution or at least learned the cause of the problem ?
Phone turns off ramdomly
Hi
I have the same problem the phone is shutting down ramdomly without any warning and i have to use the power button to turn it on again
any solution guys ??
Did you task29 the rhodium before flashing the new rom?
Sometimes flashing the new rom doesn't clear the memory properly leaving traces of old files to foul up the operation. Flashing task29 before flashing a new rom will stop this.
After you flash task29 there will be NO os on the rhodium. You will need to pull the battery, Put it into bootloader and then flash new rom from PC or use sd card method.
Cheers...
I have exactly the same problem, 2-3 times a day, I need to soft reset it. The phone was working well until I moved from 6.1 (original) to 6.5; I believe the new radio has issues. Any recommendation, flashing the radio does not solve the problem.
I used to have 1-3 SODs a day. Now I have only one SOD a month. My solution was to remove compact framework 3.5 and that weathersolution where you can add new cities. By the way; I upgraded to WM 6.5. Before the upgrade I had no SODs.
Sorry to bring up an old topic, but I recently acquired a Touch Pro 2 (RHOD100, original HTC model) and having exact the same issue. There's no saying when it's happening, but always during an action. Had it when pressing the End key after a call, when pulling the Usb cable from the device, and during other things too.
Hardware seems fine, battery is firmly in place and contacts are fine, and clean.
Having factory WM 6.5 Rom on it. And like mentioned before, I also do have Compact Framework 3.5 installed since it's required by some of my software.
Anyone ever found a solution that's confirmed to solve the issue?
I'm sorry for bumping up an old thread but after doing a search this was the first one that was listed which isn't 'That old'. I have just bought one of these phones, brand new, from factory. It comes with windows 6.5 and runs the OS version for the phone is - 5.2.21887 (21887.5.0.86) The phone seems to randomly just shut off without notice and to be able to turn it back on again to use it, I've got to take the battery out and put it back in again, then it will be able to turn back on. When the phone does enter the state of completely turning itself off. I have noticed that my notification LED light does flash green, I don't know why it does this. But if anyone has some help for me to sort this problem out and enable me to use my phone perfectly then that would be great!
Yet again, sorry for bumping up an oldish thread