I would like to know how to disable the internal GPS.
The reason is that I have found it to lose position fairly frequently whereas the TomTom Wireless GPS MkII I was using with my old Treo never once lost it's position.
So I intend to disable the internal GPS, and use my TomTom Wireless GPS MkII instead.
WinMo 6.1
Black&White v5.0
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 4.1.0.7
thanks in advance
Paul
I can only think of settings/GPS. Maybe setting GPS Program port to '(none)' instead of com4 might disable it? Also, I just had a look and when I load tomtom on the phone and go to 'configure' where I would select a GPS receiver to use, there's one which says Tom Tom Bluetooth GPS Receiver. Would that work for your wireless? I'm just guessing here.
Thanks Roman. I don't see any way of validating 100%, but I think what's happening is when my external (TomTom Wireless GPS MkII) is connected, the phone is getting it's position from that GPS rather than the internal one.
So in theory, problem solved.
In practise however (I used it yesterday), the phone isn't losing the GPS position like before, but it seems to have lost a load of accuracy.
I need to do more testing on this.
Related
Hello, I have installed TomTom Navigator 5 in my Qtek s200, but I can't connect it with the bluetooth GPS if the telephone is switched off.
Tomtom runs ok, but doesn't find GPS device.
If I switch on the telephone there isn't any problem, tomtom runs ok and find the GPS device.
I have used tomtom, and dell GPS bluetooth GPS reveivers.
Someone knows if is there a solution to use the GPS with the telephone utility switched off?
Thanks!
ive got this problem too with my xda 1 which i only use as a satnav unit
I use the xda with a wired gps but tomtom complains there is no gps device because the unit is in flight mode, even tho im not trying to use any wireless signals.
anyone help ?
thanks.
I don't know if I understand you right, but I might have an explanation for this. On my Qtek 9100, I can't use a bluetooth GPS-receiver when the device is in flight-mode. Flightmode disables all radiosignals...and since bluetooth is sort of a radio signal, it's disabled as well
A solution might be to turn off and on your device and "cancel" when you're asked to enter your SIMs PIN-code. This way, the device is not in flight mode (so bluetooth works) but the telephone-reception is disabled.
I hope this helps, if not: let me know!
--Marc
yes that works but the phone device is still switched on so uses battery
the gps in question in my situation is a wired unit going directly to my old xda 1's com port so shouldnt matter if the phone or bluetooth are on or not. Even if the pda was in flight mode it shouldnt affect use of my wired gps as there are no radio signals.
seems like a 'bug' in the tomtom software that if the pda is in any kind of flight mode including the phone being off, it decides it cant communicate with any gps, no matter how its connected, as if they expect everyone to be using bluetooth gps' and just include the wired configuration as a legacy function.
malty
maltloaf said:
yes that works but the phone device is still switched on so uses battery
the gps in question in my situation is a wired unit going directly to my old xda 1's com port so shouldnt matter if the phone or bluetooth are on or not. Even if the pda was in flight mode it shouldnt affect use of my wired gps as there are no radio signals.
seems like a 'bug' in the tomtom software that if the pda is in any kind of flight mode including the phone being off, it decides it cant communicate with any gps, no matter how its connected, as if they expect everyone to be using bluetooth gps' and just include the wired configuration as a legacy function.
malty
Click to expand...
Click to collapse
Darn...sorry, I misunderstood. I'm using a bluetooth GPS-receiver myself, so I just took for granted that you also used a bluetooth device And indeed, looks like a bug...not very convenient.
--Marc
Concerning bluetooth devices:
This seems not to work with Windows Mobile 5.0.
With Pocket PC 2003 devices it is possible to use with TomTom bluetooth while in flight mode.
Here's a work around for Win 5.0:
1) Enable the phone and bluetooth in the Comm. manager.
2) Make the link to thte bluetooth gps in TomTom.
3) Disable the phone in the Comm. manager.
4) Return to TomTom.
The bluetooth link will be maintained until you exit Tomtom or try to link again.
This might also be the case with a wired gps.
AJ.
Hi,
Thinking about getting a TYTN and never had GPS navigation before so a bit of a noob. Whats the best kit to get, I would need the software and a GPS reciever so whats best to get.
I have found this - http://www.handtec.co.uk/product.php?xProd=142&xSec=8
Or is a bluetooth GPS receiver better? - http://www.handtec.co.uk/product.php?xProd=154&xSec=8
If its agains the rules to link to those websites I will delete them.
If you get the TomTom software then get the TomTom receiver as well because it will work right out of the box. Setting up non-TomTom satellite receivers in TomTom is a real pain in the backside.
I had absolutely no problems setting up TomTom with Holux GPSlim236.
Just pair the gpsreceiver with the phone and assing it a com port,
then select the correct port in TomTom. Works like a charm.
TomTom will even enable blutooth by itself.
Holux GPSlim 236
Also using the Holux without any problems. Small device with good battery lifetime and fast fix. Buy a small GPS so you don't have to leave it in your car. Thieves like them now everyone is taking his mobile out and radios tend to be build in by the car manufacturer.
Also take a look at i-Go software instead of TomTom. More maps available for East Europe and many nice features. Very fast on a TyTN! Can be installed from SD card.
Or look out for the SD version of TT5. It's always handy to be able to install a fresh version from the SD card after a PDA crash when there is no PC near. All other versions need Activesync to install, which you probably won't habe able to do on a holiday trip!
pbw
i installed TomTom Navigator 6.020 SD BENELUX V660.1219
the program works,
it only cant find my gps device :s
some help would be much appreciated
Have you considered searching for this one - I have answered the same question at least 3 times to date!
Other NMEA Device
Baud Rate 9600
Comm Port 4
Mike
I was having a problem with that also.
It didn't matter if I was in the middle of an empty field running around with the thing in the air like an idiot, the internal antenna was too weak.
Now if I was in the car, the thing would pick up a signal no problem.
After looking into alternatives - like an external antenna - I settled on this:
I just picked up a BT-359W Bluetooth GPS Receiver for 85- Euro new.
The only difference between the BT-359W & BT-359S is the design on the top.
I made sure the battery was 100% charged before I turned it on (old habits die hard) and after spending 5-10 minutes trying to configure the Bluetooth on the HTC P3300 - I am a newbie when it comes to this new technology - it was able to get 3 satellites while I was in the house right away.
The thing is very small also - 82 mm x 41 mm x 13.4 mm (Inches: 3.22" x 1.61" x 0.52").
I would have to say that this is a great alternative to a wired antenna.
Here is a review I read before making my final decision: GlobalSat BT-359 Bluetooth GPS receiver review
Click to expand...
Click to collapse
Originally posted --> HERE
What a waste
Looks like you have a lot of money to burn, or whats the point of having a P3300 (with a bult-in GPS receiver - SIRFIII BTW) and then buying a bluetooth external GPS (basically another SIRFIII) ? cos its external ?
AD10 said:
Looks like you have a lot of money to burn, or whats the point of having a P3300 (with a bult-in GPS receiver - SIRFIII BTW) and then buying a bluetooth external GPS (basically another SIRFIII) ? cos its external ?
Click to expand...
Click to collapse
You missed the point completely.
The internal antenna was too weak.
When I am in a car, I have no problems at all getting a satellite fix.
The reason I bought an external GPS receiver is because I am not in a car all the time when using the GPS.
Longhair said:
When I am in a car, I have no problems at all getting a satellite fix. The reason I bought an external GPS receiver is because I am not in a car all the time when using the GPS.
Click to expand...
Click to collapse
That doesn't make sense at all, it should be the other way around. Inside a car the signal will allways be weaker than outside, because of the surrounding metal.
grun said:
That doesn't make sense at all, it should be the other way around. Inside a car the signal will allways be weaker than outside, because of the surrounding metal.
Click to expand...
Click to collapse
Thanks Grun, I thot I was the only one missing the point...and crikey what a way to shout your ignorance.
grun said:
That doesn't make sense at all, it should be the other way around. Inside a car the signal will allways be weaker than outside, because of the surrounding metal.
Click to expand...
Click to collapse
completely agree, what you're saying doesnt make sense unless you were in some very dense forest with all the trees in leaf, but you say you were in the middle of a field.
im about to install tomtom on my orbit so will see what its like as i used to use a bt gps reciever on my xda IIi
hello
i have installed tomtom ver 5
and i have to say that it works a treat..
it takes about a minute to register on the GPS but it does work well form inside the car aswell as outside the car.
The settings i use are
GPS Program Com 4
GpS Hardware Com 0
and keep the 3rd tab option checked ie pocket pc controlling access
On the GPS setting in tomtom select other NMEA device and choose Com 4
First time use will take about 5 mins so keep the phone still then after should take less than a minute.....
hope it helps
Tomtom not working
I have tried endlessly without success to get the tomtom on my orbit working. It keeps saying 'no gps device found'. When I select 'Other NMEA device' i dont see com port 4 as one of the options, i see com2 and serial (i think).
I thought maybe the software was not properly installed when i read about the com 4 thing and so uninstalled it. However I bought the phone (brand new) with the tomtom from ebay but now i cannot reload the tomtom as it keeps crashing during install.
Any ideas on what next I can do
have you changed the hardware port to com 4 first?
start>settings>connections>gps
then on first page GPS settings it asks what program port form the drop down list select com 4, that should then enable TomTOm GPS settings to display com 4.
remember once you have selected settings connect your phone to PC via actie sync and on
start>programs>quick gps
select menu and select update automatically when connected via active sync
this speeds up the process of finding the satelites and the data is usually valid for abut 3 days, so it does help to locate satelites quicker.
keep the phone still for about 5 mins and it should work..
thanks
l6cum
PS i am using TomTom 5, but the procedure should be the same
hi,
Go to mininova.org and download Tomtom Navigator 6 of it. It might take a couple of days to download sometimes. After you download follow the instructions and it is all user friendly. If you want any help don't hesitate to get back to me. If you want a copy in a CD send me a SAE so that I can write it on a disc and send it to you
Hello,
I was planning to buy the HTC P3300 one of the main reasons is the build in GPS (which I want to use in my car). Is the build in GPS good enough to use in a car? I start having doubts when I saw a package offered with a external gps as well?
Thanks in advance,
Luigi
Of course it is usable in car. I had the p3300 gps (now the p3600 trinity gps). both devices have very good signal. So no external gps recommended.
Luigi2007 said:
Hello,
I was planning to buy the HTC P3300 one of the main reasons is the build in GPS (which I want to use in my car). Is the build in GPS good enough to use in a car? I start having doubts when I saw a package offered with a external gps as well?
Luigi
Click to expand...
Click to collapse
Yep, works totally great. The Orbit has a very good GPS receiver, v. good at receiving signals, and the units volume level make it equally good for hearing the voices. I've used prevoius PDA's with an external GPS, but the Orbit does just as good, without all the hassle of extra leads.
GPS settings
Can anyone help me?? i have got the Artemis since 4 weeks, TomTom was pre-installed and worked actually, but couldn't find some maps for it. Therefore I removed the app and installed iGo 2006 and some other GPS apps. Now I cannot find TomTom and all the other apps throwing me the same "cannot find GPS receiver" message. Is there something wrong with the TomTom removing or there is some way I can tune the receiver to answer for the other apps.
Thanks in advance
Tingusz said:
Can anyone help me?? i have got the Artemis since 4 weeks, TomTom was pre-installed and worked actually, but couldn't find some maps for it. Therefore I removed the app and installed iGo 2006 and some other GPS apps. Now I cannot find TomTom and all the other apps throwing me the same "cannot find GPS receiver" message. Is there something wrong with the TomTom removing or there is some way I can tune the receiver to answer for the other apps.
Thanks in advance
Click to expand...
Click to collapse
In tomtom you have to select the Internal GPS receiver.
serch for settings in the other apps where you can select the GPS receiver.
It is connected to COM4 by default.
Yes, in TomTom you must go to the menu screen, select 'Change Preferences' then select 'Show GPS Status' then select the 'Configure' tab. Once your there select look for an option for 'Built In GPS Receiver' if it is there your done, if not you need to select 'Other NMEA GPS Receiver' set the GPS Baud Rate to 4800 then select the COM Port your GPS is on, usually COM4 by default.
Hi
I have the same problem, I've checked all the settings (tomtom and device)and they're correct but still Tomtom says no gps device.
I've just hard reset my device, is there anything I need to do?
I have a xda orbit.
edit: sorted, just me being stupid (as always)
Try with this settings
Try your mobile under system settings you can find GPS icon.
Check GPS program port is COM4 and Hardware port is COM3 with baud rate 4800 selected. Access tab click Manage GPS automatically
Once these settings are same as above try with your GPS software (TOMTOM or any other) with the GPS port as COM4 selected.
Please let me know if it works
I have a solar/battery Bluetooth GPS receiver that used to connect fine with TomTom on WM5 but since upgrading to WM6 I can't seem to connect with TomTom. I notice that the menus are different now for connecting and am not sure if I've set it up properly. Is there some specific set up for GPS now or do not all receivers work with WM6?
Never mind. I worked it out. I actually have to create a port for the device to connect to after pairing it.
indeed
Have a go at downloading google maps too. If you have got Windows managing your GPS then clicking on "Track Location" will show your GPS position on a google maps You can get a sattelite image of the exact place you're standing in - magic
Start Tomtom up at the same time to test that windows is correctly providing GPS data to both apps at the same time.
ttfn,
n.