Develop Bugs

Tomtom Routeplanner & GPS BT

Can anyone tell me why TT Routeplanner doesn't "see" my BT GPS?
I also have Destinator3 installed on my PPC and works perfectly with my GPS Receiver. So I assume that it is not a bluetooth connection problem.
Please, anyone?

what kind of GPS receiver do you have ?
does it support serial port profile ?
what drivers have u selected in TT GPS ?
Did you update to the latest version of TT ?

I have a BT48.
Yes, it supports SPP
No drivers were selected in TT GPS, simply because TT does not see a gps connection. I click on GPS Setup (within TT settings), but nothing happens.
TT Routeplanner doesn't have a new version. It has been replaced and it is not supported any longer.
Any suggestions?

Is the gps receiver listed in the bluetooth section of your ppc ? (settings-connections-bluetooth)
Try removing the link, then bond again using outbound Com 5 (spp)
In TT GPS manually select NMEA 0183v2 Bluetooth in the upper box and
com 5 in the lower drop down box. Then tick the blue box left.

I solved the problem, which by the way was so silly that I refuse to mention it. :wink:
Thanks anyway pleum

tomtom 5 & bluetooth gps

just got myself tomtom 5. unfortunately cant hook up my gps which is Altina GBT708. It is a bluetooth gps which i could use successfully with previous versions of tomtom on com port 6 now it dosent work. any tips. tried using com port 5 patch in other forums still no result. tried installing previous version of gps driver over current still nothing.

TomTom5 is a pain in the butt to configure your GPS. I have the NavMan GPS sleeve for the IPAQ and just sleecting NavMan GPS from the settings screen doesn't work. I had to configure a standard NMEA GPS unit and set the baud rate to 38400 and then it worked. Play about with the settings, one will work eventually!

how do you go about doing that.i have been trying to select various options dosent seem to work

I am having the same problems with a Fortuna Clip-on Bluetooth GPS. Worked fine with previous TT3 and works fine with Memory-Map software.
The only thing I noticed is that you can pick com port but not the baud rate.
Any help on this would be appreciated. :?:

Just select standard wired GPS or standard bluetooch GPS (wired in my case). It then asked for baud rate. I searched the web to find the right baud rate to set for my device.

i chose the standard bluetooth gps. then it asked me to selected the port. so i selected com port 6. after that it just doesnt do anything. for tomtom 4.44 it goes to bluetooth manager automatically and asks to confirm the gps device

After selecting Standard bluetooth the next screen asks what the unit is connected too and after selecting com6 nothing happens?
If I select TomTom bluetooth I get some blue light flashes from the GPS unit and that is it.

Mine is wires, not bluetooth so I can't help I'm afraid.

I have Orange SPVm2000, TT5, Fortuna Clip-on Bluetooth GPS, Motorola HS850 Bluetooth Headset and have them all working together.
I had the same problem as reported hear of not being able to setup GPS on com 6, TT5 would either freeze when selecting com 6 or no communication would start between GPS and PDA.
First my observations:-
Always start to configure GPS with a soft reset this is a must as this is the only way I can guarantee a connection now that I have it working.
The only time I could get the blue light to flicker on my GPS was when I selected TomTom GPS receiver
When I select Com6 I am not given the option to select baud rate?
The sequence of events that made the final connecton:-
Do a soft rest.
I selected TomTom Bluetooth GPS and left the PDA and GPS trying to communicate for 5mins. During this time the blue light on the GPS flashes at different rates.
I then selected "Other Bluetooth GPS" then Com6 and it sprang into life.
This is not a guaranteed solution, but it worked for me. Why?
The problem is clearly with TT5, as I have no problems with this setup with other navigation software.
Remember in TT5 if it fails to connect once it will not connect at all until you do a soft reset of your PDA.
Hope this helps.

Daron at Tekguru seems to have solved this problem:
http://www.tekguru.co.uk/phpBB2/viewtopic.php?t=6291
"...I've resolved the issue, which stems I think from the BT GPS unit I use (Emtec as supplied with CoPilot Live).
It seems that TTN5 has decided it is not a valid BT unit, which is a major grr.....
But in the end after a good hour of hard resetting the machine to give me a clean platform I've found the following works (assuming BT is on and the GPS already paired):
- Tap on the screen and select Change Preferences (big spanner)
- Tap the black triangle until it says Preferences 4 of 6
- Select Configure
- Select 'Another cabled NMEA GPS' set the GPS Baud Rate at 38400 and select DONE.
The BT wizard will then allow you to select the correct bluetooth port, for my machine it was the top of the two BT ports (COM 8 - if you tap and hold).
You will notice a small orange and black circle at the top right of the screen this will start to spin if you are connected to the GPS if it does not spin then soft reset the PDA and try again.
This did take three tries before it connected for me but it worked beautifully.
TTN5 uses a superb VGA graphics set and it looks damned beautiful! Worth the effort but by God TT could have made it less painful!"

Hi, might be worht giving my post here a look http://forum.xda-developers.com/viewtopic.php?p=125995#125995
Might be able to help you.... James
:wink:

IT WORKS....
I was a bit sceptical at first but xda-rocks found the solution from us. he might not be the one to find it but atleast brought it to our attention. im sure a lot of people were suffering with this problem and will be pleased that they can use their tt5 at last. i had almost given up hope at one point and move back to tt4.44 as i find tt3.07 utterly rubbish, slow and without features.
i can now start playing round with the gps once again like when i first got my m2000...
THANZ AGAIN

TT5 & Blutooth
Hi Guys
I thought I would post this. I had the same problem with TT5 and it not connecting to my BT gps until I installed 5.10 . The only problem is that I already got my refund from TT due to lack of functionality. I had to install a cracked ver off of the net and Piratebay has a 5.10 hack on there now. I think I will reorder my TT5 as it seems to work great now.
THanks
Coupegbr

tom tom 6 wont recognise inbuilt gps

... can someone give me the settings to fix this problem, and also an english lanuage voice, thanks

Other NMEA GPS recever Baud Speed to 9600 on Com 4 should work fine. You can download a voice from www.tomtom.com go to the Plus section of the site and select voices, the built in ones are available for download, what happened to your original? - Mike

thanks for the help, dont know what happened but they all came up not installedhad a look at the extended rom and tried to run the cab but it wouldnt run, but al should be fine now thanks

the gps still wont work, what settings do you have in the gps applet in settings? i cant select com 4 in tom tom what comes up is com9 gps com0 com2 and serial, no matter what it is set to in the gps settings

I think you need tom tom 6.02 to recognize the internal gps.

I'm using tomtom 6.010 and it works perfectly on Xda Orbit.
Settings in Orbit
Program GPS: Com 4
Hardware GPS: None, baud rate 9600
Tick Manage GPS Automatically
Settings in tomtom
Select "Other NMEA GPS Receiver" 9600 on Com 4.

Have you been to the Tomtom options>preferences>GPS>configure yet? maybe that's your problem ??
Mine is set to com 4 by default in the prefs and In built GPS in the TomTom settings. Hope it helps.
EDIT:
Also bear in mind that the program will take about 30 secs to recognize the built in GPS and then it will take around 45 secs to get a signal outside so give it time too

astrodemoniac said:
Have you been to the Tomtom options>preferences>GPS>configure yet? maybe that's your problem ??
Mine is set to com 4 by default in the prefs and In built GPS in the TomTom settings. Hope it helps.
EDIT:
Also bear in mind that the program will take about 30 secs to recognize the built in GPS and then it will take around 45 secs to get a signal outside so give it time too
Click to expand...
Click to collapse
With 6.02 it takes about 10 seconds for a cold start to get a lock and 3 seconds for a hot start. It uses the QuickGPS files! Mine has usually got a fix by the time I've loaded TomTom and opened the satelite info page!
Phil

I have :
Software tab : port : com4
hardware tab : port not set, speed 4800 bauds
Acces tab : select the item
These are the settings with were set when I bouth the device.
KR, Imer

low405 said:
With 6.02 it takes about 10 seconds for a cold start to get a lock and 3 seconds for a hot start. It uses the QuickGPS files! Mine has usually got a fix by the time I've loaded TomTom and opened the satelite info page!
Phil
Click to expand...
Click to collapse
QuickGPS files ?????

Quick GPS is an application on the HTC Artemis and MDA-C-III (Not too sure about the Orbit as I haven't had a chance to mess around with one yet).
It uses the internet or GPRS connection to download a tiny database every 72 hours to speed up the GPS signal acquisition. It is in program files on the device if you have one - Mike

Got It working in the end Couple of Restarts got it going. and to clarify the orbit does Have the Quick GPS aplication, thank you all for your Help

Hi all,
Seems what ever i do my tomtom6 cant find my built in gps. Try'd to set it to com port 4 ect. but nothing Any have more sugestions?
If so thx already.

6Tom9 said:
Hi all,
Seems what ever i do my tomtom6 cant find my built in gps. Try'd to set it to com port 4 ect. but nothing Any have more sugestions?
If so thx already.
Click to expand...
Click to collapse
First, make sure your Quick GPS is up to date ( although I'm not really sure just how effective quick gps is, I'm sure I've had a signal without updating in about the same amount of time)
On your MDA, go to Settings/Sytem/GPS.
Click on GPS and in Programs tab, set GPS program port to 'COM4'
Click Hardware tab, set GPS hardware port to '(None)', and set Baud rate to
'4800'.
Click Access tab, tick box for 'Manage GPS automatically (recommended)'
Load Tomtom and go into the GPS Receiver configure screen. Select Other NMEA GPS receiver. Next screen, slide GPS baud rate to 4800 if it isn't already at that. Click done. Next screen, highlight COM4 if it isn't already highlighted, then click on COM4 and it'll bring you to the next screen which shows your current GPS Status.
Make sure you are outside to get a signal. It can take anything from 2 minutes or longer. Mine rarely gets a signal before 2 minutes and sometimes much longer. Some people are very lucky and manage to get a signal within a few seconds, though I've no idea how they manage that.
Also, I've just replaced Navigator 6 with Navigator 7 which is essentially the same but with some different colours, splash screen and one or two additions in the change preferences menus. However, it has a new feature in the GPS Receiver screen which might be useful. It now has Built-in GPS receiver and there seems to be nothing to set after clicking on that. I'm going to go test it now, see if it's any faster or works at all.

I DID IT YAYEE!!
For HTC TOUCH HD TOMTOM6 i chose 9600 and com2 and its now working.
In mobiles setting i turned all com to none..
cheers!!

Roman5 said:
First, make sure your Quick GPS is up to date ( although I'm not really sure just how effective quick gps is, I'm sure I've had a signal without updating in about the same amount of time)
On your MDA, go to Settings/Sytem/GPS.
Click on GPS and in Programs tab, set GPS program port to 'COM4'
Click Hardware tab, set GPS hardware port to '(None)', and set Baud rate to
'4800'.
Click Access tab, tick box for 'Manage GPS automatically (recommended)'
Load Tomtom and go into the GPS Receiver configure screen. Select Other NMEA GPS receiver. Next screen, slide GPS baud rate to 4800 if it isn't already at that. Click done. Next screen, highlight COM4 if it isn't already highlighted, then click on COM4 and it'll bring you to the next screen which shows your current GPS Status.
Make sure you are outside to get a signal. It can take anything from 2 minutes or longer. Mine rarely gets a signal before 2 minutes and sometimes much longer. Some people are very lucky and manage to get a signal within a few seconds, though I've no idea how they manage that.
Also, I've just replaced Navigator 6 with Navigator 7 which is essentially the same but with some different colours, splash screen and one or two additions in the change preferences menus. However, it has a new feature in the GPS Receiver screen which might be useful. It now has Built-in GPS receiver and there seems to be nothing to set after clicking on that. I'm going to go test it now, see if it's any faster or works at all.
Click to expand...
Click to collapse
Hi,
I got Quick GPS updated through Activesync
in Settings/System, I have External GPS... not GPS
In External GPS, I did what you suggested.
Same with TT too
I am still not able to get a lock.
It still get "Waiting for a valid GPS signal..."
What more can I try?
Do I need an external antenna?
--Maddu

BT GPS Reciever

Hi,
I have Black 2.5 installed on my Orange SPV m3100 and have installed my TomTom Navigator 6 software which seems to be running fine.
However I cannot get it to connect to my GPS reciever (it's not a TomTom one... that got knicked)
Has anyone had any success running this sort of set up? What setting do I need inside TomTom and in WM6?
Many thanks.
Crin

Just since you didn't mention it... you did pair the new GPS to the phone, right?
This is something I'm curious about as well. I won't get TomTom or Garmin, but Google Maps (free) is supposed to do the same thing.
-Steve

Crin said:
Hi,
I have Black 2.5 installed on my Orange SPV m3100 and have installed my TomTom Navigator 6 software which seems to be running fine.
However I cannot get it to connect to my GPS reciever (it's not a TomTom one... that got knicked)
Has anyone had any success running this sort of set up? What setting do I need inside TomTom and in WM6?
Many thanks.
Crin
Click to expand...
Click to collapse
I have run Tomtom 6 with Black 2.5 with no problems, have you tried a soft reset, and do you know how to pair it up properly with the bluetooth receiver?
I run Tomtom version 6.030 (8320) with new map version 675.1409

Hi,
I am using NAVIZON.COM and a nokia LDW3 GPS receiver and I must select manualy in Navizon software my GPS.
Maybe it is an WM6 problem or Navizon problem.
try to select it before launching maps
regards
Richard

I have paired my m3100 with the GPS. In TomTom under GPS device I have selected "Other bluetooth GPS reciever" then it asks...
"GPS is connected to:"
Which do I select?

Crin said:
I have paired my m3100 with the GPS. In TomTom under GPS device I have selected "Other bluetooth GPS reciever" then it asks...
"GPS is connected to:"
Which do I select?
Click to expand...
Click to collapse
I use com port 0, but you need to set this in bluetooth settings before you run Tomtom, let me know what you have done so far and I will help you out.

I just helped someone with a bluetooth gps problem where they has paired the gps, but it would not work.
I looked at the bluetooth settings in the comm manager, the COM ports tab.
There was nothing there but "New Incoming port" and "New Outgoing port".
I clicked on "New Outgoing port" there was the GPS listed, and I clicked it to assign a com port. After I picked one that it would accept, the GPS worked fine.
Just because you pair the GPS does not mean you are done with the config.
Be sure and assign the port number.
I hope this helps.

I've sorted it now, thanks for all help.
I'd already done the pairing... AND set up a serial port but it wasn't appearing in the list within TomTom. However, for some reason when I tried it again to show someone it wasn't working...
...it worked!
Isn't that always the way? I dunno if it was the soft reset. seems feasible so thanks for that suggestion.
Anyways, i'm a very happy bunny now. My SPV has never run so fast, my TomTom works and I have my messenger all merged with Outlook nicely (finally) WM6 Black 2.5 rules!

This was driving me crazy, i was trying all these things and couldn't get tomtom to find my gps. but like an idiot i had overlooked the com ports on the bluetooth settings.
I set it to com 0, went to tomtom and com 0 showed up under other bluetooth gps(before it was cam3 com7 RIL on Com6 and irda). Now its all good to go!
btw, does the RIL on Com6 mean that its seeing the internal gps?

Hi
I have installed GPS on com5, TomTom don't reconize it (don't list com5) but i choose com3 and save setting. Exit tomtom and edit binary file navigator.cfg and change com3 to com5 save and rstart TomTom, then reconize com5 and works fine.
Try yo do this.

GPS and TomTom

Hi guys and gals,
I've tried doing a search on the forum but I'm struggling to find what I need...
Just wondering... I've installed TomTom 6 on the Artemis and I want to configure its GPS settings to use the internal GPS. What settings do I need to use?
I was setting COM4 and 4800bps but TomTom's just saying "No GPS Device"
Any ideas what I'm doing wrong?
Thanks in advance,
Rob.

Hi, the settings i use for TomTom Navigator 6 are:
"Other NMEA GPS reciever" - GPS Baud rate of 9600 - COM4:
Hope this helps

Strange, I have just posted this on another forum:
Please make sure the GPS setting within the control panel section of your C-III gas not been altered from default, messing with this can cause the problem you are having, it should be set:
Programs Tab
GPS Program Port COM4
Hardware Tab
None and 9600
Access Tab
Manage GPS automatically should be selected.
Start TomTom up and got to Change Preferences/ Show GPS Status, tap "Configure" and go through the various pages, the best one to use is "Built in GPS receiver" as it is the most simple setting only versions 6,020 and 6,030 have this facility. If you are using some other version go for "Other NMEA GPS Receiver", Baud Rate 9600, and select COM4:
Take the device outside and wait for a while for it to find the signal - Mike

I agree with the post above, but when you use Other NMEA , you can use any baud rate (assuming you are using the built in GPS reciever of the Artemis) on the Artemis. I prefer 57600.
And before you go out and wait for satellite connections, plug your Artemis to your computer and Activesync and fire up QuickGPS and download ephemeris data. You can also do this when youre connected to WiFi or GPRS.
This will speed up your device connecting to satellites.
Have fun.

nm8 said:
I agree with the post above, but when you use Other NMEA , you can use any baud rate (assuming you are using the built in GPS reciever of the Artemis) on the Artemis. I prefer 57600.
And before you go out and wait for satellite connections, plug your Artemis to your computer and Activesync and fire up QuickGPS and download ephemeris data. You can also do this when youre connected to WiFi or GPRS.
This will speed up your device connecting to satellites.
Have fun.
Click to expand...
Click to collapse
Agreed lol