Hi guys and gals,
I've tried doing a search on the forum but I'm struggling to find what I need...
Just wondering... I've installed TomTom 6 on the Artemis and I want to configure its GPS settings to use the internal GPS. What settings do I need to use?
I was setting COM4 and 4800bps but TomTom's just saying "No GPS Device"
Any ideas what I'm doing wrong?
Thanks in advance,
Rob.
Hi, the settings i use for TomTom Navigator 6 are:
"Other NMEA GPS reciever" - GPS Baud rate of 9600 - COM4:
Hope this helps
Strange, I have just posted this on another forum:
Please make sure the GPS setting within the control panel section of your C-III gas not been altered from default, messing with this can cause the problem you are having, it should be set:
Programs Tab
GPS Program Port COM4
Hardware Tab
None and 9600
Access Tab
Manage GPS automatically should be selected.
Start TomTom up and got to Change Preferences/ Show GPS Status, tap "Configure" and go through the various pages, the best one to use is "Built in GPS receiver" as it is the most simple setting only versions 6,020 and 6,030 have this facility. If you are using some other version go for "Other NMEA GPS Receiver", Baud Rate 9600, and select COM4:
Take the device outside and wait for a while for it to find the signal - Mike
I agree with the post above, but when you use Other NMEA , you can use any baud rate (assuming you are using the built in GPS reciever of the Artemis) on the Artemis. I prefer 57600.
And before you go out and wait for satellite connections, plug your Artemis to your computer and Activesync and fire up QuickGPS and download ephemeris data. You can also do this when youre connected to WiFi or GPRS.
This will speed up your device connecting to satellites.
Have fun.
nm8 said:
I agree with the post above, but when you use Other NMEA , you can use any baud rate (assuming you are using the built in GPS reciever of the Artemis) on the Artemis. I prefer 57600.
And before you go out and wait for satellite connections, plug your Artemis to your computer and Activesync and fire up QuickGPS and download ephemeris data. You can also do this when youre connected to WiFi or GPRS.
This will speed up your device connecting to satellites.
Have fun.
Click to expand...
Click to collapse
Agreed lol
Related
Hi All,
I am not having any lock setting up XDA IIs, Holux GR-230 GPS and Tomtom 3.07 navigator. If someone has managed to get these 3 talking, then i will be grateful if the settings could be shared with me.
thanks
gosh28us
O2 XDA2s
ROM Ver: 131.00 WWE
Radio Ver: 1.06.00
ExtROM Ver: 1.31.139WWE[/b]
Have you checked which COM port the GR-230 is using and matched it with the tomtom software?
http://www.holux-uk.com/Products/gr-230/download.shtml gives a download for checking out what COM port is used
No, i haven't. I will do that.
thanks
gosh28us
let me know what you find
For what its worth - My Tomtom GPS receiver uses Bluetooth Serial port on COM6: but I know this can be changed to Bluetooth COM5, serial on COM1 and also COM9
XDA2s + Tomtom3 + Holux 230
I have this exact combination working.
Use COM5 BT
Set the type to SIRF 9600 (38400 proved unreliable)
then tick the box on the left.
If you go back to the 1st tab, you should see it's communicating.
Cheers,
Hal
GPS viewer hasn't been able to identifier the port to be used. I have tried the combination given by Hal and that wasn't successful either. I'm now going through all the possible tomtom GPS cobinations and will update you as soon as my luck shines.
Thanks in advance for all your help.
gosh28us
When you pair the gps with your pda do you get the message that a serial port profile is available for the device?? Mine does this and it sets itself up as com 5. I am not sure if beams affects this, I always switch off beams under settings/conncetions/beams, if a wired gps is used this is essential as the beams takes com 1 and wont allow a wired gps to work if enabled.
No. i don't get that message on the XDA2s although I remeber that on the XDA2.
I have downloaded Holux GPS viewer on my PDA but when i scan, it doesn't find any com port
I have deleted the Holux GPS (GR-230) and paired again, went to the Bluetooth screen which shows HOLUX GR-230: SPP slave and it connects and shows the duration clock.
I am and have been changing the options on the TomTom GPS screen, alwyas tick the big box but when i go to the status screen don't see any firing between the attenna and the PDA icons.
thanks
On the XDA, go into bluetooth settings and make sure that under the services tabe, the "Serial Port" is enabled. Unless this is enabled, you won't have COM5 & COM6 on your XDA
Also, once you pair with the device, try exploring it & seeing what services it can provide
Weasel, I have done what you have said below and yes, COM5 & COM6 are among the list when i check the TomTom GPS screen 2nd box.
I have been using different options from the 1st box, ex. TomTom Wireless GPS, TomTom Navigator GPS etc etc, combining with COM5 & COM6 etc etc from the 2nd box but still the status screen doesn't show any communication between the antenna & the PDA.
With regards to the Holux GR-230, should i do anything different apart from turning it on whiles i'm trying to do the setup?
thanks
gosh28us
with tomtom 3.0 it was simple to connect with tomtom 4.0 it was again simple then came tomtom 5.0
had to select wired gps and then chose com port 6 with tomtom 5.0 with wm 2003se. with wm5.0 its all different cant get it to synch with my gps any help will be great. im sure there will be a lot of people strugglign with this
Same problem here but using a Pharos 360 with the Bluetooth docking station. With WM2003SE Tom Tom shows a lot more com ports. It used to have Com5 and Com6 and the bottom of the configuration screen. Now it only has Com1 Wired connection, Com2 and COm9.
When pairing the GPS to an outbound serial port you can not use com9, Com2 or Com1. If you pair the GPS to new port like com6, Tom Tom still does not offer com6 as an option.
So I figured you had to use the GPS control panel item to map another Com port to the actual GPS com port. But still no joy. After creating a new software com port it still does not show up in Tom Tom. If you use one Com2 or Com9 that Tom Tom does have options for, it does not connect.
Anyone got this working??
Shawn
Please check your PM.
Thanks,
Darren
solution found for the above
go to bluetooth and pair the gps with the phone. enter passcode if required then click on new outgoing port and then select com port 6.
open tomtom then select configure gps then select other buetooth gps. you should now see com port 6. select this and everything should work now.
That does not work for me. Once I pair my GPS and assign it a com port, the com port will NOT show up in the Tom Tom GPS configuration screen.
Shawn
tomtom
need to ensure you enable the serial connection when it asks you. for me it worked on com 6 and should be same for you no matter wat bluetooth gps you are using as it says this on tomtom website. instead of using wired gps like in 2003se we need to use bluetooth gps option and it should work. seems to work fine for me. do a breakdown of what you are doing cos we may find something i am doing that you are missing out or something you are doing which is wrong.
by the way i have beams turned off and i have not fiddled with com ports on the gps setting icon in settings menu. the application and hardware port have been set to none. we just need to apply the gps port to com 6 upon creation of partnership
Thanks for the reply
This is what I am doing.
Settings->Connections->BlueTooth
On Mode tab. Turn On Bluethooth
Click Device Tab
Click new partnership
Pharos iGPS-BT shows up. I select and say next
I check the serial Port service and click save
I click on Com Ports tab
I click on new Outgoing Port
I select My GPS and select Com6
I have tried with the "Secure connection" on and off
Click Finish
Now the comm port tab shows
Pharos iGPS-BT (COM6)
New Outgoing Port
New Incoming Port
Click Ok to close the BlueTooth manager
Click X to close the settings window
Run Tom Tom
Click on the GPS Bars to get to the status summary
Click on the bars again to get to GPS Status
Click COnfigure
Select Other Bluetooth GPS
Press Continue on next screen
Now all the shows up is
BT UART
COM2:
Serial Cable on COM1:
COM9:
Ir on COM3:
So I can not select Com6 as it is not in the list.
i have the problem....
can,t anyone welp. pls
think i have a solution
slammers et al,
switch off 'Receive all incoming beams' in Settings, Connections, Beam.
in Settings, Connections, Bluetooth, Services select Serial Port - in mine 3 are ticked:
Enable service
Authentication(Passkey) required
Encryption required.
click Advanced, Inbound COM Port is 5, Outbound COM Port is 6.
switch on your bluetooth GPS receiver.
open Bluetooth Manager and double tap your GPS receiver, if it's not in Bluetooth Manager then pair the device and create a serial connection by clicking New, Explore a Bluetooth device, select your device to make a serial connection shortcut.
start TomTom, go to 'Change preferences', Show GPS status, Configure, select 'Other Bluetooth GPS' and select Serial port 6....click done....in the GPS Status window you may see that it is connected....if not do the next step.
click done, exit application.
soft reset device.
switch your bluetooth gps receiver off then on.
start TomTom, leave it for 30 seconds....it should connect to your GPS device...if you have the older TomTom GPS receiver you'll be able to tell that it's made a connection by the constant blue light being displayed on the gps receiver.
if you have no luck with selecting 'Other Bluetooth GPS' try selecting 'Other Cable NMEA GPS', choose GPS baud rate 4800 and then 'Bluetooth Serial Port 6' in the TomTom configuration screen.
i know it's a bluetooth device but this has been a problem prior to version 5.10 of the tomtom software and people have had success using this option and connecting.
i've had success with a few different configurations and have helped a few people get theirs working.....also there is a claire on this board who i went through a painstakingly long back an forth post with and i'm still not sure if she got it working....but i've just learned how to get mine working where it turns on the bluetooth automatically and switches it off also...and prior to this post i had it connected using the 'Other Cable NMEA GPS' instead of Other Bluetooth GPS....so good thing i turned it on and messed with my config while trying to explain how to modify yours.
good luck.
i dont have this opction on windows mobile 5 decoy 7....
you dont have that option?
no... mobile 5 have the BT like qtek s100.. very simple.... :shock:
but finely i have put on work the bt-338 on mY BA with tom tom 5
i do this:
seting-connections-bt then i partnership with gps
next
setings-connections-bt-com ports and make outgoing port with gps (com6)
setings.connections.bt.com ports and make incoming por (com7)
next
go to gps frome wn5 and put com7 in "software" live the menu of hardware as "none" and 4800 and ond the 3 windom put on
then opem de tom tom and open de pgs configuracion and use "other bt gps" and use the port com6...
work on me :lol: :lol:
good luck....
go to gps frome wn5 and put com7 in "software" live the menu of hardware as "none" and 4800 and ond the 3 windom put on
then opem de tom tom and open de pgs configuracion and use "other bt gps" and use the port com6...
Click to expand...
Click to collapse
Are you sure you mean softport 7 and set 6 in tomtom?
help
I am having this problem but the TyTn only lets me use Com 0 so I cant set it to com6.
WHen I am in TomTom it says there is no gps and when trying to configure it doesnt give me the right options.
help please
Hello,
I was planning to buy the HTC P3300 one of the main reasons is the build in GPS (which I want to use in my car). Is the build in GPS good enough to use in a car? I start having doubts when I saw a package offered with a external gps as well?
Thanks in advance,
Luigi
Of course it is usable in car. I had the p3300 gps (now the p3600 trinity gps). both devices have very good signal. So no external gps recommended.
Luigi2007 said:
Hello,
I was planning to buy the HTC P3300 one of the main reasons is the build in GPS (which I want to use in my car). Is the build in GPS good enough to use in a car? I start having doubts when I saw a package offered with a external gps as well?
Luigi
Click to expand...
Click to collapse
Yep, works totally great. The Orbit has a very good GPS receiver, v. good at receiving signals, and the units volume level make it equally good for hearing the voices. I've used prevoius PDA's with an external GPS, but the Orbit does just as good, without all the hassle of extra leads.
GPS settings
Can anyone help me?? i have got the Artemis since 4 weeks, TomTom was pre-installed and worked actually, but couldn't find some maps for it. Therefore I removed the app and installed iGo 2006 and some other GPS apps. Now I cannot find TomTom and all the other apps throwing me the same "cannot find GPS receiver" message. Is there something wrong with the TomTom removing or there is some way I can tune the receiver to answer for the other apps.
Thanks in advance
Tingusz said:
Can anyone help me?? i have got the Artemis since 4 weeks, TomTom was pre-installed and worked actually, but couldn't find some maps for it. Therefore I removed the app and installed iGo 2006 and some other GPS apps. Now I cannot find TomTom and all the other apps throwing me the same "cannot find GPS receiver" message. Is there something wrong with the TomTom removing or there is some way I can tune the receiver to answer for the other apps.
Thanks in advance
Click to expand...
Click to collapse
In tomtom you have to select the Internal GPS receiver.
serch for settings in the other apps where you can select the GPS receiver.
It is connected to COM4 by default.
Yes, in TomTom you must go to the menu screen, select 'Change Preferences' then select 'Show GPS Status' then select the 'Configure' tab. Once your there select look for an option for 'Built In GPS Receiver' if it is there your done, if not you need to select 'Other NMEA GPS Receiver' set the GPS Baud Rate to 4800 then select the COM Port your GPS is on, usually COM4 by default.
Hi
I have the same problem, I've checked all the settings (tomtom and device)and they're correct but still Tomtom says no gps device.
I've just hard reset my device, is there anything I need to do?
I have a xda orbit.
edit: sorted, just me being stupid (as always)
Try with this settings
Try your mobile under system settings you can find GPS icon.
Check GPS program port is COM4 and Hardware port is COM3 with baud rate 4800 selected. Access tab click Manage GPS automatically
Once these settings are same as above try with your GPS software (TOMTOM or any other) with the GPS port as COM4 selected.
Please let me know if it works
Hope someone can help ... I know this should be easy but just can't get things working. I have loaded iGuidance software into my P3300 with WM6 ROM. I dont know what com port to use and which baud rate to set at in iGuidance. In the WM6 "external" software should i check off or uncheck let Wm manage. In this program it wants to know what GPS program port I am using ? and GPS Hardware port and Baud .. Hope someone can help - been about a week and I cant seem to figure it out - thanks very much
I run Destinator for satnav, and have the gps settings at COM4 and 4800 baud in Destinator.
In external GPS, I have the following settings.
Programs tab:COM4
Hardware Tab: GPS Hardware port NONE , Baudrate 4800
Access Tab: Manage GPS ticked.
Also,
I found that sometimes Destinator would say that it had lost the gps connection , then found it, over and over.
To get over this problem, I installed GPSGATE (Google for it).
Run that, it'll find the GPS on COM4, then set a "virtual" GPS connection for COM5.
Try pointing iGuidance to COM5.
That should help.
hello,
i had tomtom running on my mda compact III till a ferw days back. now when i try to run tom tom, i get an old map and the message at the bottom left saying "No GPS device" and somehow the bluelight (bluetooth ?) at the top starts flashing . i went to settings ->system (tab) --> GPS and checked the settings
GPS program port is GPD1
GPS hardware port is COM3
baud rate = 4800
access manage GPS automatically (recommended) --> checked
i googled the issue and came across the settings above at the following site
http://www.modaco.com/content/htc-a.../248572/compact-iii-gps-settings/#entry825168
the guys device works fine. can you guys tell me what has gone wrong to my GPS device
I just uninstalled tomtom navigator 6 and am reinstalling it later, but I believe these are my settings.
Other nmea reciever
Baud rate 4800
Com 4
Hardware port = 'none'.
thanks for the reply,
i tried hardware port "none" but that did not work on my xda
what was your GPS program port setting?
Go to the GPS aplet on the phone and set it as follows:
GPS Program port = COM4
GPS Hardware Port = (None) Baud Rate 4800
Manage GPS Automatically is selected
Now start the TomTom application and go to change preferences/ Manage GPS and use the selection for "Inbuilt GPS Receiver" if your software version supports this option, otherwise use Other NMEA GPS Device, Com 4, Baud 4800 and it should work fine - Mike