Please help me i beg u - Touch Diamond, MDA Compact IV ROM Development

im sorry and thank you for reading this... but... i did a tweak... in the regedit(stupid me).. which made my diamond freeze at start up... and when i hard restarted it... it loaded the first time to just show menu at bottem and start at top but no programs what so ever.. i restarted it again to have it freeze at start up and its no longer even starting... and.. mine is unlocked... can some one assist me .. and its not syncing with my computer... if it did i was gonna attempt to install a new rom to see if it works but i have no clue where to go from here

Make sure your battery is not empty or recharge it if needed.
Then try a hard-reset again. If you do a real hard-reset the Diamond will offer an option to wipe out the memory in order to re-install the ROM. (Just to be sure we are talking about the same: pushing the reset-button does not make a hard-reset rather a soft-reset!)
If it still not working try to get to bootloader mode. From there you should be able to flash another ROM.
Good luck!

two possible ways.
ONE:
you say
it loaded the first time to just show menu at bottem and start at top but no programs what so ever..
than stopp!!! dont restart, check if you can connect with activesync.
if yes, use progs. like CeRegEdit.exe. its a DESKTOP-PC-Program that connects to your diamond and you can change back the tweak per remote.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWO:
turn your device to bootloader-mode (more details use search) than connect your device with your pc. start with flashing ...
if you have problem to follow this instruction, than try to use searching.
after searching but not cöearing problem than give signal.

Related

How to get Palm Treo 500v rom in

wrong place when i posted the thread last time, however, it's just of great importance for me, so i bring it here.
got Palm Treo 500v days ago, with Chinese Rom in it, which I really hate a lot. also got a Palm Treo 500v english rom(some friend dumps for me), and i've benn trying to get it in to mine.
Follows the problem: How Should I get it in?
I tried to press down+power, and succeeded in entering BL mode, top of the screen says:EBOOT Ver:V4.0.0 ExtROM:ENG, capture see below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried the tool usbloader, get some pics
using "usbloader GalaxyII.nb0", seems everything goes on well, but nothing happens
been waiting for 45min, still nothing, so I cut the usb connection, get this
wondering How to get the Palm Treo 500v rom in!!
days trying almost drive me crazy, anybody helps, best regards
anybody using this pet, i'd like to support you the rom if necessary
Try this way...
Get the .abi file extension (the new rom you want to put in) and copy on at least 1gb minisd card.
Put the minisd in the phone, put the full load battery in and push simultaneus power + D-pad down.
Start the bootloader that found the upgrade on minisd and start the upload.
Wait the complete upload and the reboot.
That's all.

Upgrade hx2490b to WM 6

Hi! I'm new here so, go easy on me
I'll try to explain:
Today I got an old HP iPAQ hx2490b from a friend of mine. This has windows mobile 5. No problem. Until i realized that WPA2 Was a no-go
Read and tried to understand this; forum.xda-developers.com/showpost.php?p=1516882&postcount=66 But didn't understand to much. So my question is, Does anyone know of a dumbed down guide on how to do this?
-bolla3
Edit: GOD! how hard can it be to post a topic whitout typing errors.
Why do you want to install old WM6?
Just give a try to WM6.5, you can get it from [here]
It is possible that I am the dumbest person to ever have an PPC, Because I didn't understand a thing..
Ok, I did som testing... When I start the updating it gets to 1 % Then i get ERROR 608 message. On the iPAQ it says "Digital sign mismatch".
Any ideas why?
To update iPAQ you need to use PRE-BL mode.
Contacts + iTask + Reset (with stylus)
Release when Pre-BL appers on screen or if You see just white screen
Connect USB cable or Cradle and push Calendar button to get connection with PC
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Always HARD-RESET iPAQ after update!
Calendar + Messaging + Power + Reset (with stylus)
Release when Formatting PS.. appers on screen
Hope that helps.
​
Spiaatie You are a god! It worked! Thank you very much.

[Q] HTC Desire Bravo RUU problems

Hi,
my friend bring me this HTC dead - after power on I can see only black screen with HTC logo and four triangles in corners.
I found here some issues about this problem but nothing worked.
I created GoldCard and tried to flash HTC with RUU. I tried many versions but it always crashed. Here are some screens.
Here it looks good
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But then an error apear
Here is what I can see after disconnecting USB cable after failure
Can someone help me fix this problem? I don't now what do next.
Thank you.
the "RADIO_V2" error is not a good sign unfortunately, I think it's very hard to bring it back to life. Hardware issue rather than software.
Last thing to attempt:
- Put phone in a plastic bag, then put in freezer for 10minutes (seriously)
- Try running the 2.3.3 GB RUU (search for it), it does not need a goldcard.
You may get it booting, but it probably won't last long.
Hi,
i tried to put the phone into freezer for 30 minutes, after that nothing changed. So, you thing that's HW error?
pablox said:
Hi,
i tried to put the phone into freezer for 30 minutes, after that nothing changed. So, you thing that's HW error?
Click to expand...
Click to collapse
Sorry, think you have a radio brick which is the worst kind of brick :crying:
Okey, thank you much for reply

TWRP continuously presents the same message?

Hi Everyone,
I have unlocked the boot menu on my One M9, and installed TWRP (https://dl.twrp.me/hima/twrp-3.0.0-2-hima.img.html).
However I have a sneaking suspicion that the custom recovery is not working correctly. Every time that I boot into recovery I see the same message (shown below). Every time that I see the message I tick the 'Never show this screen during boot again' checkbox, and then swipe the 'Swipe to Allow Modifications' button.
Why am I seeing this message over and over again? Furthermore what does seeing this message actually mean? As a side note I appear to be able to install ROMs (Android HD, and Venom) - log files show successful ROM installation - however I cannot boot into them, instead I simply find myself at the bootloader screen whenever I start the phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help here would be great! I am currently unable to use the phone, and would ideally like to start using a custom ROM. However if doing so is not possible it would still be good to work out what is going on before I make the move back to the stock ROM.
Kind Regards,
Davo
that is normal, if you won't use stock roms again, just select never show this during boot again and swipe to allow system modifications. then you can normally flash roms without any problem
That is exactly my point! I have already followed your suggestion over ten times...but the message keeps appearing regardless!

(solution) Ghost touch, ramdom turning on and off screen

You need to make sure its not app, rom, kernel, related, try booting in safe mode to see if problems persits if no then is app related.
If you wipe and reinstal rom and problem persist then this might be help full
Before anything else i sugest you look for zenfone 2 dissambly vids so you get to know what you are going to be doing, it is easy.
Before telling you the solution let me explain my phone symptoms:
1) Ghost touchs, be aware if you have selected show cursor coordinstes or show touch, much of the times this ghost touch doesnt appear.
2) Phone screen starts turning on and off by itself. This is very annoying I tried turning off doble touch to wake but this didnt help.
So what is the solution?
You need to open the back of the phone unscrew everything and then in the charging usb port you need to make sure that the back part of this pice doesnt make contact with the metal back plate. What I did is to use an electrical pice of tape that cut. And simple as that my phone working normal again.
Remeber to screw everything tight as possible.
Pd: i didnt took any pics but im show what part of the phone im referring
Hope this helps have a great day
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you show more photos of this process?
It doesn't work for me
and the image is for removing antenna cable from other tutorial. don't remove antenna cable.

Categories

Resources