Power Button not functioning in black screen mode - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi ive recently upgraded my WM5 to Schaps 4.31 WM6 ROm
but now theres a peculiar problem
when the screen switches off due to power saving/key lock
i cant wake it up again without doing a soft reset.
Any ideas why this might happen ? or how to solve it ?

Related

Qtek9000 freezes after switching off the backlighting and on

Hello since i've upgraded to the new radio version 1.11 on my device, this is what happens: if i want to switch off the backlighting of the q9000 in order to save energy and afterwards back again, either the device doesnt recover from that state and i have to reset it, or the device lights up when i try to wake it up by pushing on any button or on the screen with the stylus, but is freezed and i cannot activate it back again;The green network light keeps flashing but nothing wakes the device up.
Could someone help me out of this one, as this is quite annoying, as you can imagine.
Brgds, aDHOC.

Button and screen problems

Hi, my blueangel has been acting up, everytime i turn it on the start button and message buttons keep getting pressed constantly (being activated) however when i turn the backlight off, by pressing the power button for 5 secs, the problem is solved, but when i turn on the backlight it gives me the same problem..
Any ideas how i can solve this problem, since my blueangel is not in warranty.
anyone?
For me it sounds like a hardware problem, but can you share with us which rom do you use ?
my rom version is PDA2k_Arabic_14000_169_11200
I too think that it might be a hardware error, however, is there any way to fix it.. ???

Tom B&B4.1 lite, screen crashed out

First many thanks to Tom for his great job.
I just intalled the 4.1 lite, and I also put back the softs I used in b&b4.0, but when I did a soft reset, I can not get the screen light up, the screen was just like dead, but the blue light of middle scroll ball works.
Now I get back to b&b 4.0 trying to figure out what is the problem.
CPU scale problem
I had a similar problem with the full version when the Artemis turn to sleep mode but the screen lit with a soft reset. I just deactivate the CPUscale option in BatteryStatus to make the screen lit again as before.
Me too had the same problem... the phone seemed to be working but no display... had to hard reset my orbit and it seems to be working fine for almost 2 days now.
Also the Brightness adjustment shortcut in HTC Home didn't work using it seems to be the problem for me
biou said:
First many thanks to Tom for his great job.
I just intalled the 4.1 lite, and I also put back the softs I used in b&b4.0, but when I did a soft reset, I can not get the screen light up, the screen was just like dead, but the blue light of middle scroll ball works.
Now I get back to b&b 4.0 trying to figure out what is the problem.
Click to expand...
Click to collapse
I had the same problem ...
I have the same problem
Don't know if it's because of installing some certain programs.
I also had this problem with the full version when the Artemis turn to sleep mode but the screen lit with a soft reset. When I tapped the screen the screen went black again (installed on it: tomtom, CM11.b, used softkey to change contact to use CM) . Did a hard reset yesterday today everything is fine but I havn't installed anything on it
if i use the xp off thing i get this everytime! use the power button on the side now mucho better
Hi, I had the same issue. after a soft reset.
To resolve it :
- Connect HTC to PC or power supply -> Light comes back
- Go to Settings / System / Backlight
- Move the brightness setting for "On battery power" to more bright.

flicker screen

I have asked the question before and I will ask it again.
I am running a P3300 with WM5 O2 rom.
I'm using the PDA as a phone and the only thing installed is tom-tom ver. 6.
The unit got stuck on the tom-tom screen and would not move.
Pressed the reset button and now it is stuck on the home screen flickering.
Has any one seen this before?
Does anyone know if a fix?

ISSUE : 3G disconnects when I short-press the home button

I have a very annoying problem with my TP2 : when I short press the home button to go back to the home screen, the data connection terminates. I tried to remove the setting for long-pressing the home button, to switch tu GSM only, to change the sim card (same and other operator), but no effect.
After a hard reset it works normaly again for a few days and then it starts doing like that again.
Any idea what is causing this issue and how it can be solved ? I can't hard reset my device every 3 days and I don't want to upgrade to wm 6.5 because I think the HTC official 6.1 works much more faster than any 6.5 ROM I tried.
Thanks!

Categories

Resources