Can anyone help us please, reading the tread of Helmi's first post of AKU 3.5 a few of us is experiencing problem with the internet sharing function.
We get a massage saing that it cannot connect for a unknown reason?!
Please help!!
Big thanks!!
Ivan's AKU 3.5 ROM has the same problem.
if U experiencing prob. with sharing inet from pc(pc connected to inet - passthrough connection) try change usb connection type to serial (in helmi's 3.5 rom use prog :/programs/extra/usb mode switch) & change to serial not rndis, it works for me
issues with t-mobile? please form a queue
Not the solution...
phsnake said:
if U experiencing prob. with sharing inet from pc(pc connected to inet - passthrough connection) try change usb connection type to serial (in helmi's 3.5 rom use prog :/programs/extra/usb mode switch) & change to serial not rndis, it works for me
Click to expand...
Click to collapse
I was talking about the internet sharing in the programs directory.
It fails to connect to GPRS...
Perhaps someone can post a internet sharing cab.
Hello
I used this
ROM 1.30.77 WWE
RADIO 1.09.00
and when i search from my PC bluetooth services i found Dialup modem....
but i Chandeg to Helmi AKU3.5 v1.3 ROM and something change .. maybe ...
I dont use from changing rom Dialup because i wasnt out of office....but now i wanted to connect my notebook via Uni and Bluetooth found only Bluetooth Network and Serial Service....
Anybody can help me why i don see modem ? I cant connect from my notebook via UNI...
THnx for help...
I believe . . .
Since AKU 3 BT DUN was dropped in favour of BT Personal Area Networking
I am also having trouble with this, as my primary OS is OS X which lacks a PAN service.
Helmi has released the broadcomm stack as a test but that fails for me atm.
Try using PAN if you can?
FYI
http://forum.xda-developers.com/showthread.php?t=291639
Ta
Dave
Mathyass said:
Hello
I used this
ROM 1.30.77 WWE
RADIO 1.09.00
and when i search from my PC bluetooth services i found Dialup modem....
but i Chandeg to Helmi AKU3.5 v1.3 ROM and something change .. maybe ...
I dont use from changing rom Dialup because i wasnt out of office....but now i wanted to connect my notebook via Uni and Bluetooth found only Bluetooth Network and Serial Service....
Anybody can help me why i don see modem ? I cant connect from my notebook via UNI...
THnx for help...
Click to expand...
Click to collapse
Please read http://forum.xda-developers.com/showthread.php?t=282780
...Thnx
Great link for tutorial BUT....
Everything i understand i tried a lot of things but it only works via USB cable ...
I tried Internet sharing but if i choose Internet connection which i am using in mobile and works in Internet sharing it say that it cant connect because unknown reason ...
Sorry for my not so good english....
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
leoni1980 said:
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
Click to expand...
Click to collapse
This has to do with the fact that ics doesn't work with the toshiba bluetooth stack.... If you change to the microsoft stack on yout XP laptop you will be able to use ICS.
Cheers,
HJ
only problem is, that not all PC bluetooth device have this choice, I mean change stack to microsoft.... before you buy any BT stick, look at manufarcuter web, if it is possible to use MS stack. I dont want to make propaganda for MSI products, but there is few BT, which have this choice. actually I using THIS one, and here is possible to install MS stack. here is manual, how to install this device with MS BT stack.
PS: this question has been answered XXX times, so try to search before ask
my bluetooth is integrated into my laptop, hence the convenience. why have microsoft taken a seemingly downward step in windows mobile 6 and made it even LESS compatible than before?!? seems a bit stupid to me.
Also this doesn't answer the question of why I am unable to connect my device via USB. I need this function for work. is there any way of installing the old wireless modem app as a simple solution?
thanks everyone for your help so far
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
vdavide said:
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
Click to expand...
Click to collapse
Care to tell us what laptop are you using and what bluetooth stack involved because some hardware could be forced to be supported by the MS driver.
sorted
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
---deleted---
leoni1980 said:
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
Click to expand...
Click to collapse
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
vdavide said:
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
Click to expand...
Click to collapse
Connection through USB supposed to be ok, hmm... but you can try to force the bluetooth hardware to be supported by the MS driver. Could you please do this and give me the details.
The step:
1. Start > Control Panel > System > Hardware > Device Manager
2. Find the unknown USB driver ( The one with the ? beside it)and right clicking on it > Properties > Details > Click the dropdown option and select 'Hardware Ids'
3. You will see something like 'USB\Vid_044E&Pid_300c&Rev_1915' and maybe 'USB\Vid_044E&Pid_300c'.
4. Write down the Ids. and post it here.
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I hope you've given me the complete Ids.If so then try this one. Backup the original bth.inf inside \windows\inf\ folder and replace with the one from this archive. Now try to install again by pointing to the new bth.inf. But please uninstall any previous installation first. If not success then tell me since I'm trying to use the widcomm stack.
thx CYPHOL , i will try tomorrow
i'm added the original inf file for this device ...
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I tried the Internet Sharing facility on my XP tower upstairs (which has never had Activsync on it) and it works just the same - no need for drivers - it's as if I'm just plugging an ethernet cable in.
Be interested to know if the same will be true of old laptops with SP1, as is mine at work.
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
lanwarrior said:
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
Click to expand...
Click to collapse
WM6 is using PANU whereas WM5 is using NAP as to connect through Bluetooth but if you use USB it should connect as is only that you have to switch the bluetooth off before making the connection.
FYI, I'm using Vaio VGN-TX37GP and can connect through both the USB and Bluetooth conns. after modifying the infos on the MS inf driver file.
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
vdavide said:
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
Click to expand...
Click to collapse
Nice to hear that but sorry for my careless mistakes done in doing the scripting.
I got ths same issue.
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
briols6 said:
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
Click to expand...
Click to collapse
Check this post:
http://forum.xda-developers.com/showthread.php?t=298691#10
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
kame1986 said:
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
Click to expand...
Click to collapse
Try searching with a google advanced search - limiting your results to http://forum.xda-developers.com
Try say "BBconnect Trinity" or "Blackberry Trinity".
It's there I promise.
If its there plz point me in the rite direction. wud appreciated muchly !
will also search though.
For KAME1986
Hello,
I have just finish to upload the .cab on rapidshare.
http://rapidshare.com/files/50855639/bbconnect_wm6_pro_4.0.0.90.cab.html
Enjoy.
Private69.
@++++
could you upload not in Rapid pls..
thx
Finally i have a steady WM6 version with works with BBConnect !!
Thx
try this...working on my trin
try the steps here to get bbconnect working.
http://www.sems.org/entry.asp?ENTRY_ID=276
Graytraveler, try .84, 90 did not work for me with a stock Tytn II, but 84 did. Or I used Dutty's latest ROM from Xda-developers.com and .92 worked fine with that.
Hchickers, you can try this:
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, such as Resco (www.resco-net.com) or Total Commander (www.ghisler.com, I use 2.5 beta 3). Then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Then soft reset and install Blackberry Connect. This method worked for some people (they weren't using 750, but still). It might work for you as well.
Click to expand...
Click to collapse
even if this isn't any help for people getting started with BBC on there trins, all new BBC updates get posted there.
p.s. If u dont have bb service from your network before!!, then bbc will never work.
good day to you
i know it's sound silly to do it but i'm from israel and we don't have hebrow support to wm6 smartphone so i need to downgrade from wm6 to wm5 and i want to know if somone can give me link to download the BEST wm5 rom for this gadget and how can i do it?
thanks.
i found some wm5 rom for the dash but i having some trubble installing it
there is somthing strange it's telling me that i need to disable the usb connection???? if i will do that the computer will not find the dash...!
so i don't know what to do
Make sure you're doing this after you loadup active sync. The Rom installer prompts however its normal. Let it go through.You may have to reboot your PC after the first time it asks you this but try again. Usually the 2nd time it'll go through
USB connection
U need to diable the USB connection in the activesync only (remove the checkmark next to the "allow USB connection")
Hello James,
Can you please provide me with the link for windows mobile 5.0 download. I am also trying to downgrade from WM6 to WM5. Your help would be sincerely appreciated! If you can send me the attachment in an email at "[email protected]", that would be really great..
Thanks
May I please have the link to WM5 as well? My e-mail address is [email protected]
Thanks!