Can anyone help us please, reading the tread of Helmi's first post of AKU 3.5 a few of us is experiencing problem with the internet sharing function.
We get a massage saing that it cannot connect for a unknown reason?!
Please help!!
Big thanks!!
Ivan's AKU 3.5 ROM has the same problem.
if U experiencing prob. with sharing inet from pc(pc connected to inet - passthrough connection) try change usb connection type to serial (in helmi's 3.5 rom use prog :/programs/extra/usb mode switch) & change to serial not rndis, it works for me
issues with t-mobile? please form a queue
Not the solution...
phsnake said:
if U experiencing prob. with sharing inet from pc(pc connected to inet - passthrough connection) try change usb connection type to serial (in helmi's 3.5 rom use prog :/programs/extra/usb mode switch) & change to serial not rndis, it works for me
Click to expand...
Click to collapse
I was talking about the internet sharing in the programs directory.
It fails to connect to GPRS...
Perhaps someone can post a internet sharing cab.
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
leoni1980 said:
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
Click to expand...
Click to collapse
This has to do with the fact that ics doesn't work with the toshiba bluetooth stack.... If you change to the microsoft stack on yout XP laptop you will be able to use ICS.
Cheers,
HJ
only problem is, that not all PC bluetooth device have this choice, I mean change stack to microsoft.... before you buy any BT stick, look at manufarcuter web, if it is possible to use MS stack. I dont want to make propaganda for MSI products, but there is few BT, which have this choice. actually I using THIS one, and here is possible to install MS stack. here is manual, how to install this device with MS BT stack.
PS: this question has been answered XXX times, so try to search before ask
my bluetooth is integrated into my laptop, hence the convenience. why have microsoft taken a seemingly downward step in windows mobile 6 and made it even LESS compatible than before?!? seems a bit stupid to me.
Also this doesn't answer the question of why I am unable to connect my device via USB. I need this function for work. is there any way of installing the old wireless modem app as a simple solution?
thanks everyone for your help so far
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
vdavide said:
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
Click to expand...
Click to collapse
Care to tell us what laptop are you using and what bluetooth stack involved because some hardware could be forced to be supported by the MS driver.
sorted
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
---deleted---
leoni1980 said:
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
Click to expand...
Click to collapse
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
vdavide said:
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
Click to expand...
Click to collapse
Connection through USB supposed to be ok, hmm... but you can try to force the bluetooth hardware to be supported by the MS driver. Could you please do this and give me the details.
The step:
1. Start > Control Panel > System > Hardware > Device Manager
2. Find the unknown USB driver ( The one with the ? beside it)and right clicking on it > Properties > Details > Click the dropdown option and select 'Hardware Ids'
3. You will see something like 'USB\Vid_044E&Pid_300c&Rev_1915' and maybe 'USB\Vid_044E&Pid_300c'.
4. Write down the Ids. and post it here.
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I hope you've given me the complete Ids.If so then try this one. Backup the original bth.inf inside \windows\inf\ folder and replace with the one from this archive. Now try to install again by pointing to the new bth.inf. But please uninstall any previous installation first. If not success then tell me since I'm trying to use the widcomm stack.
thx CYPHOL , i will try tomorrow
i'm added the original inf file for this device ...
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I tried the Internet Sharing facility on my XP tower upstairs (which has never had Activsync on it) and it works just the same - no need for drivers - it's as if I'm just plugging an ethernet cable in.
Be interested to know if the same will be true of old laptops with SP1, as is mine at work.
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
lanwarrior said:
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
Click to expand...
Click to collapse
WM6 is using PANU whereas WM5 is using NAP as to connect through Bluetooth but if you use USB it should connect as is only that you have to switch the bluetooth off before making the connection.
FYI, I'm using Vaio VGN-TX37GP and can connect through both the USB and Bluetooth conns. after modifying the infos on the MS inf driver file.
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
vdavide said:
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
Click to expand...
Click to collapse
Nice to hear that but sorry for my careless mistakes done in doing the scripting.
I got ths same issue.
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
briols6 said:
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
Click to expand...
Click to collapse
Check this post:
http://forum.xda-developers.com/showthread.php?t=298691#10
I am using Wm6 since september .... i have i-mate's Pda2k ....
R 1.60.00
G 1337.38
D 5.60.00 WE
Helmi_c's WM6 ...
i got everything to work BUT WiFi ... i got wpa-psk (tkip) encryption on my Belkin54g router .. my BA is not connecting to it for some reason .. i used to connect to it throught Wm5 and Wm2003 se (Wm2003 Se usin retina wifi) nvm .. i NEED to know how to work it PLZ ! ....... any help apreciated ....
Your device cannot be BlueAngel, as the radio is 1.60 - highest ever released was 1.15.
jakubd said:
Your device cannot be BlueAngel, as the radio is 1.60 - highest ever released was 1.15.
Click to expand...
Click to collapse
that or he really flashed the wrong radio rom into it... which could explain why his wifi doesn't work...
AFAIK radio rom has nothing to do with WLAN nor BT.
jakubd said:
AFAIK radio rom has nothing to do with WLAN nor BT.
Click to expand...
Click to collapse
AFAIK Radio ROM has "A LOT" to do with Wi-Fi and Bluetooth(both are radio waves, of course with different frequency)
The radio rom is for GSM part of the phone, and the drivers are responsible about Wlan and Bluetooth, so the radio rom has nothing to do with Wlan.
About 7assoun's problem i had similar problem, the partial solution for it is when your device not connect, disable Wlan and reenable it , also make sure that your AP(Router) is configured to transmit on both 11 and 54 mbit or 11 mbit only in order 11 mbit devices to be able to connect
official wifi driver patch.
Link
Seems it's working. I had problems with my home router and cannot connect to one T-Mobile hotpost at all. Now everything seems to be ok.
thanks.. i'll try
fixed wi-fi
thx for info. I hope that will works.
it works. thanks a lot
not works
i780 was Bricked + Unbrocked with DXHA1
I had problem with WiFi connecting to Router after unbricking my i780 with DXHA1. I thought I would need a new ROM. I used this to get it working. It Worked instantly. Thanx. Thought I lost 200 quid.
eunjea said:
official wifi driver patch.
Link
Click to expand...
Click to collapse
I use WM 6.1 I780PDXHL2. Is it this patch available for this firmware version?
the patch update the driver version to the 1.0.6.8 .... It's not necessary in the HL2, and the HL1 version have the latest WiFi driver, version 1.0.8.1 ....
ZenithLK said:
the patch update the driver version to the 1.0.6.8 .... It's not necessary in the HL2, and the HL1 version have the latest WiFi driver, version 1.0.8.1 ....
Click to expand...
Click to collapse
I have I780PDXHL2 and WIFI S/W 1.0.7.7. I download windows from this site http://smartmobile.pl/soft-hl2-dla-samsunga-i780-z-updaterem-exe and use Vista upgrader. I upgraded polish WM6 I780CBHE1 to WM 6.1 I780PDXHL2.
i've still got problems.
I dont know how i can fix this.
When I am connected with a wifi point and I will surf the web by microsoft internet explore, it always says: cant find the webpage'.
Can somebody help me? Maby the ip settings is the problem
How can I fix this? Thanks!
Do you have a URL for v1.0.8.1 Wifi driver
ZenithLK said:
the patch update the driver version to the 1.0.6.8 .... It's not necessary in the HL2, and the HL1 version have the latest WiFi driver, version 1.0.8.1 ....
Click to expand...
Click to collapse
I have HL2 (CEHI2) and the version of the WiFi driver is 1.0.6.0.
I installed version 1.0.6.8 and still am not able to connect view Internet Explorer. Anyone have version 1.0.8.1 as an installable patch?
Sgh i780 wlan connection issue
I have a Samsung I780 it detects my Wireless G network on a linksys, but if i try connecting the same to a Belking WLAN B/G/N Router it does not detect the network
Any Solution for this
sunaymehta said:
I have a Samsung I780 it detects my Wireless G network on a linksys, but if i try connecting the same to a Belking WLAN B/G/N Router it does not detect the network
Any Solution for this
Click to expand...
Click to collapse
Try to change Router for b/g only.
Maybe you need to use small file on your i780 if your PDA dont want to start in G mode
i have this link install to my phone and after the wifi not working !!!
I have installed the patch but i'm still not able to surf the internet.... i can connect to my router but the phone tries to use gprs connection when i browse... can someone halp me?
i have WM6.1 and the WiFi Patched
thanks