is there a way to silence the incoming call (or any software) while the call is coming. I cannot even seem to use the jooger to lower the volume
which ROM are you using? depending on which it is, it should say "Silence" as the left softkey option, and once you hit that it will then say "Answer"
kavana's wm6.1 rom.
give it a few more hours, someone else may know of a trick, but all I can tell you now is to try another ROM, like Ricky's Rose, which does what you're asking it to.
Here's what i found via using the search http://forum.xda-developers.com/sho...ghlight=silence+incoming+calls+kavana&page=27
that thread is tooo long and confusing. i change registry value--still it doesn't work
Please anyone help.
press down the A# button until the phone vibrates.....do the same to take it off silent/meeting mode
I'm using kavana's ROM, and I just triple-tap the JOGGR thing.
I found out by luck, I guess.
syberdave said:
I'm using kavana's ROM, and I just triple-tap the JOGGR thing.
I found out by luck, I guess.
Click to expand...
Click to collapse
I tried it out, and it worked cherry. Thanks for that.
I was wanting the same thing because for the kavana 6.1 rom, there's only answer and ignore as the call option, and the joggr tap doesn't work if the phone is locked. However, I downloaded the call screen from the Rose rom, which I think looks better than the regular calling screen that comes with kavana and it gives that option as well as being able to hit 'send text' to ignore the call but also set up a text message that says that 'you're busy' for you to send. You can always just pick up the call by just pressing the talk key without having to silence the ringer first. I've found it to be quite efficient. Below is the thread that I found the link on. Hope it works for ya!
http://forum.xda-developers.com/showthread.php?t=515012&page=2
Related
when i answer a call or call someone, the fone vibrates as soon as either i or the other person picks up, im on imate 1.40 rom, how can i stop this.
He he, must be kind of irritating :twisted:
Have you tried to alter the settings in Sounds and notification->Notifications forth and back, otherwise a backup->hard reset->result might be in order, or even try to install another Rom just to get the outcome
If you use O2Plus there is a tick box in the phone profile which says "Vibrate upon reciept of call response". I turned it on initially as I thought "I don't need it to constantly vibrate" but all it does is vibrate in your ear!!!!
Hope this helps!
xdadom said:
If you use O2Plus there is a tick box in the phone profile which says "Vibrate upon reciept of call response". I turned it on initially as I thought "I don't need it to constantly vibrate" but all it does is vibrate in your ear!!!!
Hope this helps!
Click to expand...
Click to collapse
well, i unticked this, ill let u know if it works when someone rings me, lol
altho i didnt have one of those profiles ticked anyway!
cheers...
Silence Ringer
Hmmm, anyone know how to silence the ringer when a call comes in and you just want to "shut the phone up" without declining the call? With my Wizard you can just hit the volume slider, and it'll make the ringer go off.
Thanks for your help in advance.
i don't have mine yet, but did you try the joggr when the call comes in?
Yep tried that.. Even put the JOGGR in volume only mode, and that didn't shut it up either... I know on a lot of other phones you tap the power button to shut it up, but no button's will do it.
I'll keep trying..
Argh, I've still not had any luck in finding a way to shut it up when a call comes in.. *sigh*
I don't think there is a feature to do what you want. Ignore or the end button send it directly to vm as you no doubt have figured out already.
I can touch the volume strip on the dash and it mutes the phone call.
I know, not very helpful, but thought i'd let you know.
am-imate said:
Hmmm, anyone know how to silence the ringer when a call comes in and you just want to "shut the phone up" without declining the call? With my Wizard you can just hit the volume slider, and it'll make the ringer go off.
Thanks for your help in advance.
Click to expand...
Click to collapse
Look in the registry around:
\HKEY_CURRENT_USER\ControlPanel\JogBar\Settings\
There's a key there called EnableRingVolumeMute
If there isn't, try creating it and setting it to 1. Mine seems to mute the call fine with that setting.
Ringer silencing on Dash
Hitting the "reduce volume" slider on my dash silences the ringer -- no registry hacks needed. Don't know if this works on HTC unit...
El Perfecto!!!!!!! The registry hack worked on the S620.. Apparently it comes with EnableRingVolumeMute set to 0.
Muchas thanks!
This needs to go in a FAQ.
Change JOGGR Outlook key to something else?
Has anyone figured out how to change the JOGGR's launch outlook button (bottom button) to launch something else, say, FlexMail? Even though I have FlexMail set as the default mail program, it still launches Outlook...any ideas?
I hate Outlook email (it does not work well with IMAP, like, it won't delete things unless you resync it manually. Painful!)
jason
Never mind...
Got this from www.smartphonethoughts.com just now:
Well that sure didn't take long. Just 1 day after the Dash hit the streets, akil, staulkor, and some others over at Howard Forums has found a way to change the functionality of the volume jogger on the Dash to include scrolling and launching programs. You'll need to modify the registry to get this to work. So, make sure you back things up before making any changes. Here are the changes you need to make to get this working.
To Enable Scrolling:
• HKCU\ControlPanel\JogBar\Settings\SwitchToAudioFunc = 0
Tap on Bottom Key Launches IE Mobile:
• HKCU\ControlPanel\JogBar\Settings\BottomKeyApplicationName = \Windows\iexplore.exe
Tap on Top Key Performs Back
• HKCU\ControlPanel\JobBar\Settings\TopKeyApplicationName = BACK
You can replace any these with your favourite applications. Other common applications would be START (to Launch the Start menu), \Windows\tmail.exe to launch Outlook Mobile, or http://www.SmartphoneThoughts.com to launch IE Mobile with your favourite website Wink Let us know how you make out!
Here is a utility I wrote that will let you change almost all of the JOGGR settings on the phone. It will also let you change the apps that launch when you press the Camera key and the T-Zones key. The app shortcuts must be in the shortcut file format because I didn't know enough about the Windows CE LNK format to simply let you pick an EXE.
I am going to add support to let you change the apps that launch from the JOGGR bar, but wanted to get this version out now so you don't have to dig through the registry to get scrolling working.
It requires the .NET CF 2.0 or higher.
Sweet, good job! Will give it a shot.
This would be a good base for a simple DASH/S620 tweak util.. 'Cause there's a couple good tweaks out there as well.
Is there a way to do this on the Dash without having the touch strip/jogger enabled. So basically all I want it to do is silince the ringer.
which compact framework .net am I to install? I tried installing the ARM versions but they refused to install on the Dash.
pphi said:
which compact framework .net am I to install? I tried installing the ARM versions but they refused to install on the Dash.
Click to expand...
Click to collapse
The version for the ARMV4I is the correct one. Try the installer at http://www.microsoft.com/downloads/details.aspx?FamilyID=0c1b0a88-59e2-4eba-a70e-4cd851c5fcc4&DisplayLang=en. That link will take you to the .NET CF 2 SP1 MSI file.
Works like a charm. Very nice job
I have .NET CF 2.0 spk1 with a T-Mobile DASH.
But still does not work
etperez22 said:
I have .NET CF 2.0 spk1 with a T-Mobile DASH.
But still does not work
Click to expand...
Click to collapse
What doesn't it do? Does it even run?
Basically when I run it it gives an Error.
An unexpected error has occurred in the DashConfig.exe
Select Quit and then restart this program or select Details for more information.
When I hit details:
UnauthorizedAccessException
at System.IO.__Error.WinIOError()
blah blah blah.. basically a whole lot of errors
I would love for this to work..
Edited an old cab to remove the version limits. It now works on Wm6.
Install and then dial a number from the standard phone dial pad to test! You should feel a short vibrate when you tap a number button letting you know that it's been tapped.
Add it to your CAB file collection.
Cheerio
Howard
What exactly does this do, with Phone Pad? Sounds interesting
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
YUP! When you go to the dial screen and tap a number a small vibrate lets you know that a button has been pressed.
I'm also using bunches of SPB programs, but I still get the Vibrate from the standard dial screen.
Cheerio
Howard
sinmae said:
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
Click to expand...
Click to collapse
It works on my Hermes but you have to long-press the key. Press for at least a half second to get the vibrate motor spinning.
Also, be sure to set either "short" or "long" tones in the phone options. It won't do anything if set to "none."
Hey thanks for converting to WM6 I had been missing it for awhile now!
Any chance this will work in WM5? Please and thanks.
Yeah this is soooooooooooo useful tip man, thanks a lot !!^^
Uninstall Issues...
I liked the idea, just didn't like the fact that you have to push the button for so long to get hte vibrate to react, just a fraction longer and it turns into a speed dial. So let's talk about the uninstall....
I unstalled the app, everything went normal. Now I have no keypadd tones at all.
hshortt, can you provide a fix or provide the registry keys that this install/uninstall modified?
EDIT: Nevermind, fixed on my own...
Works with the HTC Touch / Vouge. Just had to do a soft reset twice. For some reason after the first time, the touch screen stopped responding.
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
chibull17 said:
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
Click to expand...
Click to collapse
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
smittyofdhs said:
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
Click to expand...
Click to collapse
guys i have tried the solution in the above link, it didnt work out.
if i exported the registry files from a non screwd device, and exported to my mine... will it work out?
This program is not very effective, cause when I tap out a phone number naturally I tap it quickly, and you have to hold for at least 300ms (I reckon) for it to even do a little vibrate.
it somehow needs to be much more sensitive, lower ms or something. Maybe its a limitation of the whole vibrate mechanism in the phone anyway.
Oh well.
Lost All Sounds
after installing i lost all sound output from my back speaker
no music, no ringtones, nothing
it only made my phone pad vibrate but screwed up all other sound output
tried to uninstall & still no fix
also hard reset & gflashing ROM again didnt fix
did it screw up my device completely !!!!!!!!!!
any fix please???
Vibrate dial pad
Thank you ! This is just what I was looking for
Sorry.Didn't find how to delete message
Hi pretty neat program, until I found a better one TouchResponse... This one allows you to even select the vibration time, and it vibrates on every tap on your touch screen. Well the problem is I un-installed Phone Pad Vibrate and now the the sound is gone when I press a phone number. The link for the fix isn't working, so how do I fix it so I can get the sound back???
Did the link for removal instructions get moved/removed for this?
The link from above is still broken. Anyone have instructions on how to remove this app?
could someone upload it on rapidshare, because i can´t load it, thank you
I didn't really know what to search for, but I'm looking for a program that if you have a text or missed call or email or anything that requires your attention, shows a full screen message saying "missed call" or "1 New Text Message" or something of the like.
The reason is sometimes my phone is on silent, and even if I look at the phone it's hard to notice if I have something new or not. Is there any such freeware program? I'm using Kavanna Rom 6.1.
Thanks.
runelord999 said:
I didn't really know what to search for, but I'm looking for a program that if you have a text or missed call or email or anything that requires your attention, shows a full screen message saying "missed call" or "1 New Text Message" or something of the like.
The reason is sometimes my phone is on silent, and even if I look at the phone it's hard to notice if I have something new or not. Is there any such freeware program? I'm using Kavanna Rom 6.1.
Thanks.
Click to expand...
Click to collapse
This works well for me.
Check this out
Automatic Keylock its Free,you can setup a better keyguard lock screen, you can disable having to press 2 buttons to unlock, & of course it will notify at certain times example: every 2 minutes or 10
Enjoy I hope that helps you out works AMAZING FOR ME
Can you pm me a link to this "Best Reminder" software? Do you think it's better than Don'tForget?
Thank you so much.
Anyone...?
Hi,
I have a Tilt 2 with stock ROM. The only two enhancements I use is "S2U2" and "Advanced Configuration Tool" ! I changed someting and now have a little problem :
When I get an incoming call and the caller id with the pic pops up, I can't pickup the call, using the green on-sceen button. This button does NOT pickup the phone call. I have to use the green hardware button to pickup the incoming call. However, I can use the RED on-screen button to end the call.
I soft reset the phone a few times and tried some settings with the "S2U2 and Advanced Config. Tool", but I can't get it to work.
Any ideas ?
I'd appreciate any help and suggestions.
Thanks,
JCE
same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-
jerzey_devil said:
same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-
Click to expand...
Click to collapse
Haha, it takes time to understand all the jargon and such that takes place around here. Just do some reading and searching, don't be afraid to ask questions if you can't find a thread explaining it. Eventually I would suggest flashing to a good rom like one of the Energy Rom's or a Cell Rom. The two best Rom Cooks on the Rhodium (Touch Pro 2/Tilt 2) side of xda.
I say the same thing as doublen1, use a non-stock ROM because these come with features already installed and you will be able to use S2U2 and all that stuff. and about the actual issue, I have had problems picking up calls with the screen, so I just started using the hardware keys.
Make sure you didn't mess around with any of the touch screen settings in Adv. Configr or BSB tweaks or something like that. This usually causes the problem with the dialer.
Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE
jce2005 said:
Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE
Click to expand...
Click to collapse
Not that I know of off the top of my head. There might be a setting inside of Adv Config that would allow you to restore to default. Also the S2U2 has a setting to take control as the dialer screen when somebody calls. You can try messing around with the settings in S2U2 as well.
PM me if you don't find an answer soon.