Develop Bugs

Voice dialing SW for mapping green (Send button) got it!!!1

is their any SW that can mimic the long green (Send)button so i can assign it to a a voice dialling SW, i have a Nokia BT that don't support voice dialing because its voice dialing don't support anything but the Send button in which in the regular button mapping it only supports changing the few side buttons but not the send/close ones
thanks in advance

ok since i have not got a reply so far i tried something considered intelligent, need some steering though, what i did is i installed phoneplus
Main Idea
1.most of the headset will mimic the short & long send (Green) button press which will activate the cprog.exe dialer right.
2. since i have no idea where is cprog mapped to this button i needed to install phone plus because it will teachme how the mapping done
Theory
1. if i replace the ppcap.exe with voicecommand.exe everywhere in the system then when i psychly press the green button i should get "Voice command is ready" instead of the dialer pad, in this situation of you press on the headset button it should also trigger the Voicecommand.exe instead of cprog.exe or the ppcap.exe
Fact
1. i tried this & it didn't work when i replaced the ppcap.exe with voicecommand.exe ofert renaming the voicecommand to ppcap for the program to think it is the same, it actually went a launched the original dialer
requiments, well i need more people to try steps like those & to stop me if they know a fact i don't.
if their is some kind of a logger (key logger) we can intiate it & press the headset button see what does it do & make it connect to the voice dialing SW

You are a brave man :lol:
What you ask is possible, as you can activate voice command via the button in the Mpx (which is also pocketpc phone edition).
Unfortunately I dont think its easy, but please keep on investigating and tell us of your progress.
surur

i so far managed to get my PPC giving me error messages like the following
1. Cannot open Cprog.exe (Dialer SW)
2. Cannot execute repllog.exe (i have no idea what is it about)
anyways this is a good sign, if i can replace cprog.exe with voicecmd.exe after renaming voicecmd.exe to cprog.exe i think the logic say that it should launch it, & if it does the BT Headset should launch it & if it does! well we got it working the stupid way but this is the begging
PS another though for those who program viruses, can't we program a parasite sw that attaches it self to cprog.exe & everytime its triggered it launches voicecmd.exe
am sorry all my test are on microsoft voice but because it the only full SW i have now

AM ALMOST THERE DUDES BUT I REALLY NEED HELP NOW, i got as far as when i press the button on my nokia bt headset to activate the voice command, though since the head set is not a hands free expectedly i didn't hear from the BT headset i heared it from the phone & ofcourse i had to speak to the phone not the BT HD to get it dialing something, now i know that thei are some SW that or BT stacks that does that, please guid me through
ONE MORE THING CPROG HAS TO BE LOADED which i actually managed to **** in the process so i also need the file cprog.exe to replace my overwritten one, otherwise your phone will not ring nore have signal bars though it will not be swtiched off & if you have the headset you'll hear the ring in it but will not be able to answer the phone, so next 2 steps are
1. Load both files & not only voicecommand or cprog
2. somehow move the voice & the mic to be working from the BT HD & not the phone

Unfortunatley I could not copy the cprog.exe to my desktop PC to send it to you... The system does not let you copy System Files...
You will have to perform a hard reset in order to get the cprog.exe back... Or maybe try to delete the modified cprog.exe and the original should be ready to use after a soft reset...
Besides, as far as I know there are no Hands Free Profile for our devices, not even with Bluetooth patches installed...
Nice try though... :wink:

well since i backup regularly i reseted my device & got a back so thanks but i got the cprog.exe , i think its **** anyways to make the major move & get stuck on something like hands free profile, i still need the cprog.exe as i file as i couldn't get it too, i have to put it on the startup so the phone will work properly then probably assign it somewhere else on the contrary anybody with some knowledge of how to make files.lnk launch multiple programs instead of one or anybody who have some idea about how hands free profile works will be of a great help
PS come on guys if we scratch our heads together we can make it, poeple here made wonders, i guess this is in hand :shock:

handsfree very near
hi, actually i use mobidial to try your idea. when i press green button mobidial will launch. so very easy i just copy everything in microsoft voice command folder and dump it to modial folder and rename voice command.exe as mobiDial.exe. when i press the green button using my headset and yes voice command is activated and function also but it will work for the first time and then the ppc will hang. reset n will work for one time again. anybody? we r very close to handsfree here.

Phone Pad Vibrate

Edited an old cab to remove the version limits. It now works on Wm6.
Install and then dial a number from the standard phone dial pad to test! You should feel a short vibrate when you tap a number button letting you know that it's been tapped.
Add it to your CAB file collection.
Cheerio
Howard

What exactly does this do, with Phone Pad? Sounds interesting

It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...

YUP! When you go to the dial screen and tap a number a small vibrate lets you know that a button has been pressed.
I'm also using bunches of SPB programs, but I still get the Vibrate from the standard dial screen.
Cheerio
Howard

sinmae said:
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
Click to expand...
Click to collapse
It works on my Hermes but you have to long-press the key. Press for at least a half second to get the vibrate motor spinning.
Also, be sure to set either "short" or "long" tones in the phone options. It won't do anything if set to "none."

Hey thanks for converting to WM6 I had been missing it for awhile now!

Any chance this will work in WM5? Please and thanks.

Yeah this is soooooooooooo useful tip man, thanks a lot !!^^

Uninstall Issues...
I liked the idea, just didn't like the fact that you have to push the button for so long to get hte vibrate to react, just a fraction longer and it turns into a speed dial. So let's talk about the uninstall....
I unstalled the app, everything went normal. Now I have no keypadd tones at all.
hshortt, can you provide a fix or provide the registry keys that this install/uninstall modified?
EDIT: Nevermind, fixed on my own...

Works with the HTC Touch / Vouge. Just had to do a soft reset twice. For some reason after the first time, the touch screen stopped responding.

I'd like to know what you did to get your keyapd tones back, this program sucks!!!

chibull17 said:
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
Click to expand...
Click to collapse
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...

smittyofdhs said:
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
Click to expand...
Click to collapse
guys i have tried the solution in the above link, it didnt work out.
if i exported the registry files from a non screwd device, and exported to my mine... will it work out?

This program is not very effective, cause when I tap out a phone number naturally I tap it quickly, and you have to hold for at least 300ms (I reckon) for it to even do a little vibrate.
it somehow needs to be much more sensitive, lower ms or something. Maybe its a limitation of the whole vibrate mechanism in the phone anyway.
Oh well.

Lost All Sounds
after installing i lost all sound output from my back speaker
no music, no ringtones, nothing
it only made my phone pad vibrate but screwed up all other sound output
tried to uninstall & still no fix
also hard reset & gflashing ROM again didnt fix
did it screw up my device completely !!!!!!!!!!
any fix please???

Vibrate dial pad
Thank you ! This is just what I was looking for

Sorry.Didn't find how to delete message

Hi pretty neat program, until I found a better one TouchResponse... This one allows you to even select the vibration time, and it vibrates on every tap on your touch screen. Well the problem is I un-installed Phone Pad Vibrate and now the the sound is gone when I press a phone number. The link for the fix isn't working, so how do I fix it so I can get the sound back???

Did the link for removal instructions get moved/removed for this?
The link from above is still broken. Anyone have instructions on how to remove this app?

could someone upload it on rapidshare, because i can´t load it, thank you

S2P...Will it work on Dash?

Hey guys, Ok I know that S2u2 and S2P are intended for touch screens. However, I was able to get S2u2 to work perfectly with a few minor registry changes. I would like to use S2P (another one of A_C programs), but I have not been able to get it to work. I am using version .40 and have found no registry keys that can help. Does anyone have any ideas? It looks like a cool program to incorportate with S2u2. Thanks for the advise.

John123456789 said:
Hey guys, Ok I know that S2u2 and S2P are intended for touch screens. However, I was able to get S2u2 to work perfectly with a few minor registry changes. I would like to use S2P (another one of A_C programs), but I have not been able to get it to work. I am using version .40 and have found no registry keys that can help. Does anyone have any ideas? It looks like a cool program to incorportate with S2u2. Thanks for the advise.
Click to expand...
Click to collapse
How did you get s2u2 to work exactly, can you share which version you used and the reg settings? If i can get that going, I'll try to help you with the s2p.

The version of S2u2 is v1.01. When I first installed it it seemed to work but the default setting is to shut the phone off after 30 seconds of being locked so I changed that setting
hkey current user\ Software\ A_C\ S2u2\ OffLCD=17
OffLCD should be 0
THe other settings are just cosmetic. I changed the clock setting to "h" instead of "HH" so it wouldnt show military time. And I changed the file path in hkey current user\ Software\ A_C\ S2u2\ wallpaper to point to .gif files for animated wallpaper.
Thanks a bunch for the help. I really like the look of s2u2 and I think that you will to.

I also got S2U2 to work. The only problem,,,, and this is a BIG problem for me, is that the S2U2 "screensaver" would not stay on infinitely for me. If i had the phone setting there for a while and "woke up" the screen i saw that the s2U2's program was not running in the foreground and showed me the default homescreen. It was still running, however, in the background since i saw it in task manager. If i clicked on it again in task manager, the program started right back up. I'm not sure if this is a conflict of another program ( like smarttoolkit, or the weather app, or photo contacts pro) or if it's because it wasn't made for smartphones. I would love to get a fully ported version for WM 6.1 standard though.

I am still running 6.0. This could be why I have had a different result with
S2u2.

why don't u guys post what others ppc apps that works on dash??

I tried the s2u2 v 1.05 and my phone doesn't like it, maybe i had the settings wrong. I installed and then tried to run ilock, and got error. I could run s2u2 and start the lock manually though. Once i locked it, if i pressed any key, the display would light up. If i was on battery power and pressed the center key to wake it up, then the display would not come on at all , but my keypad lights would and it would lock up my phone and get stuck like that until i removed the battery. I thought I disabled it, but then I got a phone call and the slide to answer screen came up(without the slide though) and then i couldn't unlock the phone and had to pull the battery again. I finally uninstalled. Is there some reg settings that are mandatory to get it to work or is it just that buggy on smartphones?

The only reg change thats manditor is the offlcd=0. I am using V1.01. I wonder if that could be part of the issue. It never did that for me but I am on the old 6.0.

John123456789 said:
The only reg change thats manditor is the offlcd=0. I am using V1.01. I wonder if that could be part of the issue. It never did that for me but I am on the old 6.0.
Click to expand...
Click to collapse
yeah, I did the offlcd=0, because without it when I manually ran it, it turned power completely off, like you said earlier. I couldn't find the 1.01 version.

showaco said:
yeah, I did the offlcd=0, because without it when I manually ran it, it turned power completely off, like you said earlier. I couldn't find the 1.01 version.
Click to expand...
Click to collapse
pm me...i have 1.01 if you want it

Ok, got 101, now no more glitches, so it was problems caused by 1.05. But s2p doesn't seem to have a chance without dpad controls available. On the s2u2, how come it doesn't autoset when display turns off? Is there a reg setting for this? And is it just me, or is the display supposed to light up whenever a key is pressed. I still have to unlock for the key to work, but I can't have the display turning on whenever I accidentally touch a key.

simple phone lock required. can you write one for us all

Hello everyone
After trying all the phone lock software out there I still can’t find what I’m looking for, what I’m looking for is so simple an icon in the start menu to lock the phone then r2u or t2u & unlock when phone rings and that’s it. I don’t like the idea of having to press the power button to wake up the screen to be able to unlock the device I’m also not interested in all of the other features that most of the phone lock’s have. Can someone help?
I have tried sensor lock I did like it a lot but I was unable to configure it and you could tell it was running in the background as the screen would jump. Plus throw in my case and a few beers and I know I’m going to drop it.
Many Thanks Jez
A list of phone lock programs you will need to search for them as some of the links aren’t applicable any more and I did need not save the ones that are working
Throttle lock
S2u2
Sunscape
Touchlock pro
Phone buddy
M lock
Organic lock
Pocket shield
Sensor lock
Lock me tight
Stylus lock

try Auto Lock (CSDEVCTRL), you could slide to the right on the screen to unlock the phone or use the windows default unlock.

Hello gbjack
Just tried that app and it’s just to much setting up and I don't think it’s going to do what I want it to do. Just hope someone is willing to write a program going by all the forums I have searched it will be popular
Cheer’s for the reply and suggestion

I tried many lock apps as well, but in the end the standard windows lock is what im using. No hassle, and it simply works as intended. I just press the "hangup" virtual button, and after the second vibration feedback i can be sure that the phone is locked. Doesn't get any simpler than that.

Then you have to try " WWE-Chobit Company SmartLock 1.7B". Only four or five options but it cannot lock your hardware key during call.
http://forum.xda-developers.com/showthread.php?t=505032&highlight=Lock

Then you have to try " WWE-Chobit Company SmartLock 1.7B". Only eight very simple options but it cannot lock your hardware key during call.
http://forum.xda-developers.com/showthread.php?t=505032&highlight=Lock

Just tried that app and it’s not even showing in programs for me to set it up, so I will have to keep looking, it amazes me that no one has written a program like I’m after considering it’s so simple.

gbjack said:
try Auto Lock (CSDEVCTRL), you could slide to the right on the screen to unlock the phone or use the windows default unlock.
Click to expand...
Click to collapse
This is good specialy the turn on bluetooth on call feature, but when we have an income call, the app takes ages to know what to do and the phone only begins to ring 5 secs after. Lockmelite it's the best one around but has a problem with alarms going to background after unlock. The "almost perfect" one is s2u but huge memory consuption makes background app's close or restart.

Hello jpl69
Tried this app found it to involved to setup and still does not do what I am looking for which is tap the screen to wake up so I than can unlock the phone using a s2u app. I find it bizarre that there are many apps to unlock the phone but you still have to push the power button to operate them. Surely it can’t take much program writing to add this feature. Jez

We have to push an hardware ley to wake up our devices from a low battery consuption state (suspend mode) and unfortunaly only have the power and volume hard keys so if you want to wake up your device with a tap on screen you'll only have a couple of hours with a full charge.

Now it makes sense why the screen sleeps if the battery only last for a couple of hours. Just a shame that the power button is so fiddly to operate. Jez

Yes, and it makes no sense having an device lock app (except on incoming calls). I only use it because of my 2 year old son that found the little tiny power on key , and made a couple of phone calls.
P.S. with a registry tweak you can enable the volume keys to wake up your device.

May be this could be your appropriate application:
MortSaver

jez.stix said:
Just tried that app and it’s not even showing in programs for me to set it up, so I will have to keep looking, it amazes me that no one has written a program like I’m after considering it’s so simple.
Click to expand...
Click to collapse
It's not in the Programs folder, it's in the Settings Folder.

try smart lock 1.7b

biosxjj said:
try smart lock 1.7b
Click to expand...
Click to collapse
That is brilliant and can be found here.
Simple and effective (needs a reboot after install, and is found under settings.

Just to be helpful... here's the brilliantly useful Reg tweak to allow wake-up from the volume keys.
- HKEY_CURRENT_USER\ControlPanel\Keybd
- set key: defaultkeylock from 1 to 0
- softreset
LockMeLite is definitely my favourite (especially with the above tweak), but as mentioned already, the alarm snooze / disappearing to background problem is a constant frustration.

Hello flid
Sorry for the delay everyone just got back from Canada so been busy catching up and sleeping. So how do I go about tweaking the reg key? I know how navigate to the reg key on a computer but not on my mobile

I changed my left soft key to lock the phone on the Home start screen as it was doing nothing useful except jumping to a phone operators website:
HKEY_LOCAL_MACHINE\Software\HTC\Manila\HomeLSKPath = windows\Endkey.exe
HKEY_LOCAL_MACHINE\Software\HTC\Manila\HomeLSKText = Lock (or whether text you want).

You just need a windows mobile registry editor. There are several free ones. My current Dutty ROM has one inbuilt, but from what I can gather the popular options are Total Commander (free!), Schap's Registry (free), PHM RegEdit (which is built in to Dutty's ROM) and Resco Registry Editor (not free - but definitely the most finger friendly). There may well be others.

Is this possible? Completely lock the screen with the Power button

(This is my first post, so I'm very sorry if I screw something up...I've been reading the XDA forums for quite some time now, so I hope I've got it right... Also, this is my very first WinMo device, so I apologize if the solution is something really stupid and easy.)
Hello guys,
I just got the TP2 about three days ago, and I SPLed it and installed WM6.5 on it. I've got the EnergyROM_RHODIUM_20091007_Titanium ROM on it right now.
However, there's something that's been annoying me. Whenever I hit the power button on the top of the TP2 to deactivate the screen, the screen will turn on if an incoming text or email should come in while the screen is off.
The only way it won't do this is if I lock it from the Honeycomb menu, then turn off the screen via the power button.
Is there a way to make the power button lock the phone and shut off the screen so it will not wake up when a text comes in?
If someone could tell me a way to do this, I'd very much appreciate it!
Thanks.
EDIT: Forgot to mention this is a T-Mobile USA Pro2.

seems this software should satisfy you :
LockDevice: Another great application that locks the device with the tap of the power button. Uses the standard windows lockscreen, very lightweight. (freeware) ~ Thanks thierry2064
in a very useful thread:
http://forum.xda-developers.com/showthread.php?t=550973

Xodium;4709086I said:
just got the TP2 about three days ago, and I SPLed it and installed WM6.5 on it. I've got the EnergyROM_RHODIUM_20091007_Titanium ROM on it right now.
However, there's something that's been annoying me. Whenever I hit the power button on the top of the TP2 to deactivate the screen, the screen will turn on if an incoming text or email should come in while the screen is off.
The only way it won't do this is if I lock it from the Honeycomb menu, then turn off the screen via the power button.
Is there a way to make the power button lock the phone and shut off the screen so it will not wake up when a text comes in?
Click to expand...
Click to collapse
If you have the WVGA(HD) Tweak tool (should be under All Programs), it has a setting that disables Wake on SMS -- it's setting 2.2.
I don't know about a setting specifically pertaining to e-mail...my very-similar setup doesn't wake up as yours does.

buckingham said:
seems this software should satisfy you :
LockDevice: Another great application that locks the device with the tap of the power button. Uses the standard windows lockscreen, very lightweight. (freeware) ~ Thanks thierry2064
in a very useful thread:
http://forum.xda-developers.com/showthread.php?t=550973
Click to expand...
Click to collapse
That's a very nice lock, I use it myself, but it's for WM 6.1.
For WM 6.5 use SmartLock.
S

MCbrian said:
If you have the WVGA(HD) Tweak tool (should be under All Programs), it has a setting that disables Wake on SMS -- it's setting 2.2.
I don't know about a setting specifically pertaining to e-mail...my very-similar setup doesn't wake up as yours does.
Click to expand...
Click to collapse
I installed SmartLock, then, when I went looking for the WVGA Tweak Tool, it was there. I thought I didn't see it, but, oh well. I checked it and it said that Wake on SMS was disabled (default).
Maybe SmartLock did that? I'm not sure. I'm testing it right now. Thanks for all the help so far.
EDIT: IT DID WORK! Thanks so much! (Definitely makes me feel better about selecting the TP2 to replace my iPhone 3GS )

sleonard said:
That's a very nice lock, I use it myself, but it's for WM 6.1.
For WM 6.5 use SmartLock.
S
Click to expand...
Click to collapse
Just to make clear: LockDevice works perfectly for WM6.5. I use it myself a long time now with different 6.5 ROMs.