is their any SW that can mimic the long green (Send)button so i can assign it to a a voice dialling SW, i have a Nokia BT that don't support voice dialing because its voice dialing don't support anything but the Send button in which in the regular button mapping it only supports changing the few side buttons but not the send/close ones
thanks in advance
ok since i have not got a reply so far i tried something considered intelligent, need some steering though, what i did is i installed phoneplus
Main Idea
1.most of the headset will mimic the short & long send (Green) button press which will activate the cprog.exe dialer right.
2. since i have no idea where is cprog mapped to this button i needed to install phone plus because it will teachme how the mapping done
Theory
1. if i replace the ppcap.exe with voicecommand.exe everywhere in the system then when i psychly press the green button i should get "Voice command is ready" instead of the dialer pad, in this situation of you press on the headset button it should also trigger the Voicecommand.exe instead of cprog.exe or the ppcap.exe
Fact
1. i tried this & it didn't work when i replaced the ppcap.exe with voicecommand.exe ofert renaming the voicecommand to ppcap for the program to think it is the same, it actually went a launched the original dialer
requiments, well i need more people to try steps like those & to stop me if they know a fact i don't.
if their is some kind of a logger (key logger) we can intiate it & press the headset button see what does it do & make it connect to the voice dialing SW
You are a brave man :lol:
What you ask is possible, as you can activate voice command via the button in the Mpx (which is also pocketpc phone edition).
Unfortunately I dont think its easy, but please keep on investigating and tell us of your progress.
surur
i so far managed to get my PPC giving me error messages like the following
1. Cannot open Cprog.exe (Dialer SW)
2. Cannot execute repllog.exe (i have no idea what is it about)
anyways this is a good sign, if i can replace cprog.exe with voicecmd.exe after renaming voicecmd.exe to cprog.exe i think the logic say that it should launch it, & if it does the BT Headset should launch it & if it does! well we got it working the stupid way but this is the begging
PS another though for those who program viruses, can't we program a parasite sw that attaches it self to cprog.exe & everytime its triggered it launches voicecmd.exe
am sorry all my test are on microsoft voice but because it the only full SW i have now
AM ALMOST THERE DUDES BUT I REALLY NEED HELP NOW, i got as far as when i press the button on my nokia bt headset to activate the voice command, though since the head set is not a hands free expectedly i didn't hear from the BT headset i heared it from the phone & ofcourse i had to speak to the phone not the BT HD to get it dialing something, now i know that thei are some SW that or BT stacks that does that, please guid me through
ONE MORE THING CPROG HAS TO BE LOADED which i actually managed to **** in the process so i also need the file cprog.exe to replace my overwritten one, otherwise your phone will not ring nore have signal bars though it will not be swtiched off & if you have the headset you'll hear the ring in it but will not be able to answer the phone, so next 2 steps are
1. Load both files & not only voicecommand or cprog
2. somehow move the voice & the mic to be working from the BT HD & not the phone
Unfortunatley I could not copy the cprog.exe to my desktop PC to send it to you... The system does not let you copy System Files...
You will have to perform a hard reset in order to get the cprog.exe back... Or maybe try to delete the modified cprog.exe and the original should be ready to use after a soft reset...
Besides, as far as I know there are no Hands Free Profile for our devices, not even with Bluetooth patches installed...
Nice try though... :wink:
well since i backup regularly i reseted my device & got a back so thanks but i got the cprog.exe , i think its **** anyways to make the major move & get stuck on something like hands free profile, i still need the cprog.exe as i file as i couldn't get it too, i have to put it on the startup so the phone will work properly then probably assign it somewhere else on the contrary anybody with some knowledge of how to make files.lnk launch multiple programs instead of one or anybody who have some idea about how hands free profile works will be of a great help
PS come on guys if we scratch our heads together we can make it, poeple here made wonders, i guess this is in hand :shock:
handsfree very near
hi, actually i use mobidial to try your idea. when i press green button mobidial will launch. so very easy i just copy everything in microsoft voice command folder and dump it to modial folder and rename voice command.exe as mobiDial.exe. when i press the green button using my headset and yes voice command is activated and function also but it will work for the first time and then the ppc will hang. reset n will work for one time again. anybody? we r very close to handsfree here.
Related
Hello guys, I would like to hear from You if you have similar problems in 1.13 version as I have in 1.11 test rom, any answer will help me with the upgrade decision:
- “contact” soft key is on the RIGHT when desktop is visible, on the LEFT in phone application and in the MIDDLE button during the phone call. JUST Imagine somebody in the car who wants to make a phone call….. especially with MISSING REAL HARDWARE BUTTONS to assign the contacts to…
- In the phone application – last unanswered phone call is not displayed on the phone screen – you have to click HISTORY to see it – just the same problem in the car – somebody is calling you, you can not get out the device on time, so you press twice TINY TINY green button on the hinge, and …. You call the last number you have called before…not the last missed one
- Phone application just shuts itself of and Universal comes to the desktop screen WHY? (Imagine AGAIN in the car….)
- REALLY ugly TMobile skin, but the original blue skin has to low contrast….Again IN THE CAR…
- maybe I did not try hard enough but I can not obtain predictable results with the onscreen quickdial (not to mismatch with SPEED DIAL butto which Is OK, )– how to obtain the names starting with second or third letter from the key – I don’t know, and anyway it does not work if you have about 1500 contacts as I have
- check how SPEED DIAL it was done in the old handspring TREO phones – large buttons with the names on them in two columns rather than one list, with whole screen “pages” of 12 contacts each, for me much easier to use and navigate if you have more than one screen of numbers as in the car there is no chances for easy up and down navigation, what you have to do now with the numbered list.
- With all this missing hardware buttons what happened with the D-Pad functionality – in Blue Angel it was UP- History DOWN – speed dial … but in Universal nothing works ?????
- “during the call” screen with 6 soft buttons stays on when the phone call is already finished – again you do not find the soft buttons in the right places when you want to make next call
- When I got rid of the TM skin video call button is missing, I can not use UMTS yet as it is not available in Krakow, but it will be needed some time…
- No BT icon on the desktop – no chances for the quick verification of the proper connection between headset and the unit
- I have heard that voice dialing functionality does not work when the unit is closed (I always keep it open – screen on the top)
- There is no voice dialing available when the unit is protected by the password (but this is disputable)
Silence Ringer
Hmmm, anyone know how to silence the ringer when a call comes in and you just want to "shut the phone up" without declining the call? With my Wizard you can just hit the volume slider, and it'll make the ringer go off.
Thanks for your help in advance.
i don't have mine yet, but did you try the joggr when the call comes in?
Yep tried that.. Even put the JOGGR in volume only mode, and that didn't shut it up either... I know on a lot of other phones you tap the power button to shut it up, but no button's will do it.
I'll keep trying..
Argh, I've still not had any luck in finding a way to shut it up when a call comes in.. *sigh*
I don't think there is a feature to do what you want. Ignore or the end button send it directly to vm as you no doubt have figured out already.
I can touch the volume strip on the dash and it mutes the phone call.
I know, not very helpful, but thought i'd let you know.
am-imate said:
Hmmm, anyone know how to silence the ringer when a call comes in and you just want to "shut the phone up" without declining the call? With my Wizard you can just hit the volume slider, and it'll make the ringer go off.
Thanks for your help in advance.
Click to expand...
Click to collapse
Look in the registry around:
\HKEY_CURRENT_USER\ControlPanel\JogBar\Settings\
There's a key there called EnableRingVolumeMute
If there isn't, try creating it and setting it to 1. Mine seems to mute the call fine with that setting.
Ringer silencing on Dash
Hitting the "reduce volume" slider on my dash silences the ringer -- no registry hacks needed. Don't know if this works on HTC unit...
El Perfecto!!!!!!! The registry hack worked on the S620.. Apparently it comes with EnableRingVolumeMute set to 0.
Muchas thanks!
This needs to go in a FAQ.
Change JOGGR Outlook key to something else?
Has anyone figured out how to change the JOGGR's launch outlook button (bottom button) to launch something else, say, FlexMail? Even though I have FlexMail set as the default mail program, it still launches Outlook...any ideas?
I hate Outlook email (it does not work well with IMAP, like, it won't delete things unless you resync it manually. Painful!)
jason
Never mind...
Got this from www.smartphonethoughts.com just now:
Well that sure didn't take long. Just 1 day after the Dash hit the streets, akil, staulkor, and some others over at Howard Forums has found a way to change the functionality of the volume jogger on the Dash to include scrolling and launching programs. You'll need to modify the registry to get this to work. So, make sure you back things up before making any changes. Here are the changes you need to make to get this working.
To Enable Scrolling:
• HKCU\ControlPanel\JogBar\Settings\SwitchToAudioFunc = 0
Tap on Bottom Key Launches IE Mobile:
• HKCU\ControlPanel\JogBar\Settings\BottomKeyApplicationName = \Windows\iexplore.exe
Tap on Top Key Performs Back
• HKCU\ControlPanel\JobBar\Settings\TopKeyApplicationName = BACK
You can replace any these with your favourite applications. Other common applications would be START (to Launch the Start menu), \Windows\tmail.exe to launch Outlook Mobile, or http://www.SmartphoneThoughts.com to launch IE Mobile with your favourite website Wink Let us know how you make out!
Here is a utility I wrote that will let you change almost all of the JOGGR settings on the phone. It will also let you change the apps that launch when you press the Camera key and the T-Zones key. The app shortcuts must be in the shortcut file format because I didn't know enough about the Windows CE LNK format to simply let you pick an EXE.
I am going to add support to let you change the apps that launch from the JOGGR bar, but wanted to get this version out now so you don't have to dig through the registry to get scrolling working.
It requires the .NET CF 2.0 or higher.
Sweet, good job! Will give it a shot.
This would be a good base for a simple DASH/S620 tweak util.. 'Cause there's a couple good tweaks out there as well.
Is there a way to do this on the Dash without having the touch strip/jogger enabled. So basically all I want it to do is silince the ringer.
which compact framework .net am I to install? I tried installing the ARM versions but they refused to install on the Dash.
pphi said:
which compact framework .net am I to install? I tried installing the ARM versions but they refused to install on the Dash.
Click to expand...
Click to collapse
The version for the ARMV4I is the correct one. Try the installer at http://www.microsoft.com/downloads/details.aspx?FamilyID=0c1b0a88-59e2-4eba-a70e-4cd851c5fcc4&DisplayLang=en. That link will take you to the .NET CF 2 SP1 MSI file.
Works like a charm. Very nice job
I have .NET CF 2.0 spk1 with a T-Mobile DASH.
But still does not work
etperez22 said:
I have .NET CF 2.0 spk1 with a T-Mobile DASH.
But still does not work
Click to expand...
Click to collapse
What doesn't it do? Does it even run?
Basically when I run it it gives an Error.
An unexpected error has occurred in the DashConfig.exe
Select Quit and then restart this program or select Details for more information.
When I hit details:
UnauthorizedAccessException
at System.IO.__Error.WinIOError()
blah blah blah.. basically a whole lot of errors
I would love for this to work..
Edited an old cab to remove the version limits. It now works on Wm6.
Install and then dial a number from the standard phone dial pad to test! You should feel a short vibrate when you tap a number button letting you know that it's been tapped.
Add it to your CAB file collection.
Cheerio
Howard
What exactly does this do, with Phone Pad? Sounds interesting
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
YUP! When you go to the dial screen and tap a number a small vibrate lets you know that a button has been pressed.
I'm also using bunches of SPB programs, but I still get the Vibrate from the standard dial screen.
Cheerio
Howard
sinmae said:
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
Click to expand...
Click to collapse
It works on my Hermes but you have to long-press the key. Press for at least a half second to get the vibrate motor spinning.
Also, be sure to set either "short" or "long" tones in the phone options. It won't do anything if set to "none."
Hey thanks for converting to WM6 I had been missing it for awhile now!
Any chance this will work in WM5? Please and thanks.
Yeah this is soooooooooooo useful tip man, thanks a lot !!^^
Uninstall Issues...
I liked the idea, just didn't like the fact that you have to push the button for so long to get hte vibrate to react, just a fraction longer and it turns into a speed dial. So let's talk about the uninstall....
I unstalled the app, everything went normal. Now I have no keypadd tones at all.
hshortt, can you provide a fix or provide the registry keys that this install/uninstall modified?
EDIT: Nevermind, fixed on my own...
Works with the HTC Touch / Vouge. Just had to do a soft reset twice. For some reason after the first time, the touch screen stopped responding.
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
chibull17 said:
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
Click to expand...
Click to collapse
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
smittyofdhs said:
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
Click to expand...
Click to collapse
guys i have tried the solution in the above link, it didnt work out.
if i exported the registry files from a non screwd device, and exported to my mine... will it work out?
This program is not very effective, cause when I tap out a phone number naturally I tap it quickly, and you have to hold for at least 300ms (I reckon) for it to even do a little vibrate.
it somehow needs to be much more sensitive, lower ms or something. Maybe its a limitation of the whole vibrate mechanism in the phone anyway.
Oh well.
Lost All Sounds
after installing i lost all sound output from my back speaker
no music, no ringtones, nothing
it only made my phone pad vibrate but screwed up all other sound output
tried to uninstall & still no fix
also hard reset & gflashing ROM again didnt fix
did it screw up my device completely !!!!!!!!!!
any fix please???
Vibrate dial pad
Thank you ! This is just what I was looking for
Sorry.Didn't find how to delete message
Hi pretty neat program, until I found a better one TouchResponse... This one allows you to even select the vibration time, and it vibrates on every tap on your touch screen. Well the problem is I un-installed Phone Pad Vibrate and now the the sound is gone when I press a phone number. The link for the fix isn't working, so how do I fix it so I can get the sound back???
Did the link for removal instructions get moved/removed for this?
The link from above is still broken. Anyone have instructions on how to remove this app?
could someone upload it on rapidshare, because i can´t load it, thank you
Anyone know how to re-set the dialer so that when you press the green call button on the phone it calls the last person? Right now, if you are at the dialer, and you press the call button, nothing happens. But the call button *does* take you to the dialer from whatever screen you are on. I'm using CRC stable, with the iPhone Dialer skin (for bigger buttons).
Is there a place I can do some research into how the dialer skins work? Theres a few issues with the iPhone dialer skin that make it seem a little broken that I'd like to fix.
BTW: does anyone know if a program compiled in VB6 will work on this phone? I was thinking about porting iContact to VB, where then I could really go crazy with it. If you want to see some of my regular PC work, see.. http://www.mediaengine.org Car Computer Software
Check the dialer thread theres probably a file you need to replace using totalcommander..
Some .dll file in the windows directory..
For some reason, I can't find a way to get VC to say the numbers when using the dialer instead of just unsing tones. I could do this on my Incite and prefer the positive confirmation of number pressed. Any ideas? Thanks.
settings\personal\voice command
in there you can change the setting.
I believe if you press the 'phone' option so its highlighted then press the options button on the right you'll be brought to a new window where you can change how it responds. I know it does what you want for me when I call and I have "confirm when calling by name" and "confirm when dialing by number" selected.
@Aaron, I have all three items checked, but still only get tone dialing.
wait... are you talking about when you press the number pad on the phone screen? Cause if so then yes, voice command wouldn't speak the numbers as you press each key. What voice command does is allow you to SPEAK to your phone and it will do what you say...
It's usually mapped to the phone/answer button on your phone (far left button on the bottom front of your phone) Press it but hold it down.... then say "call joe" or whoever... or "dial 3497894023"
Then it will confirm by saying "dial 3497894023?" And you have to say "yes"... and then it will dial.
There's a ton of commands: what time is it, whats my next appointment, whats the battery status, next track, play album etc etc. Just to name a few
As far as saying the number you pressed as tones when you press the actual number pad. That I don't get. I do remember I had a cab a LONG time ago when I had the touch pro that did it but, really, if you're pressing the number pad odds are you are looking at the phone right. I didn't keep it all too long. Especially when you can just press the call button as a long press and tell the phone what to dial.
This is what bordom gets you and doing a little digging....
Talking Dialpad
as I was talking about above; all this does is change it so your tones aren't.... tones.. but when you push them it will say the number instead. I would still go with using voice command though
according to some posts here it will work on the TP2
Well, I don't know what changed, but on my LG Incite I would press a number in the dialer and it would say it aloud with a nice female voice instead of a tone. It only did this for dialing since you need tones in-call to access things like voicemail or automated system prompts. IIRC, it was a choice in VC setup. I'm sure it was not a mod I made to the phone. Don't understand why M$ would take out such a needed feature for people like me with bad eyesight who prefer the voice confirmation of a dialed number. Tones are absolutely useless.
I posted a link to a thread regarding voice tone instead of the regular numeric tone you hear right above.... did you try that yet cause that seems to be what you are after? You didn't mention anything about it in your post so I wasn't sure but that's clearly what you're looking for.
Yeah, I looked at your links (thanks). Those are for an add-on program. This was a feature built-into Voice Command on WinMo 6.1 and can probably be enabled via a simple regedit since there is no longer a front end selection choice for it in VC.
not an add on program at all... you just download the "talkingkeys.cab" run it.. and it changes all the 'tones' of your numberic dial pad to voices saying the numbers...
takes all of 2 seconds to do.
Just tried it on me TP2 and it works fine very clear thanks Aaron
OK, I tried it. No joy. You have to hold the key for the duration of the sound file or it cuts off. This is not what I had with my Incite. All you had to do was press a button on the dialer and a nice, female voice would say the number. This was built into that version of VC on WinMo 6.1, it was not something I added on. I can't understand why M$ would have taken this out in 6.5 or why HTC/AT$T would have defeated it in the Tilt 2 ROM. Either way, it sucks.
Miami_Son said:
OK, I tried it. No joy. You have to hold the key for the duration of the sound file or it cuts off. This is not what I had with my Incite. All you had to do was press a button on the dialer and a nice, female voice would say the number. This was built into that version of VC on WinMo 6.1, it was not something I added on. I can't understand why M$ would have taken this out in 6.5 or why HTC/AT$T would have defeated it in the Tilt 2 ROM. Either way, it sucks.
Click to expand...
Click to collapse
It wasn't voice command or Microsoft that did that but something specific to that phone.... The dialer's for different phones are just that............. different!
Voice command is used for you giving commands to your phone or reading out appointments or incoming callers etc. It had nothing to do with the voice tone in your dial pad.
What you are saying is like asking my my Vogue didn't have a slide out keyboard, or a better resolution screen, or wifi. How unfair and stupid of HTC to not have put that in there. Again... you are comparing an LG phone here with an HTC phone.. different hardware, different OS's. different.... phones I'd be more disappointed about loosing the headphone jack then I would be about having a standard keypad tone wen switching from the Incite.
Can't really compare apples and oranges in this case I would say. If that cab I found you doesn't cut it I'm sorry but it's likely the best you're going to find. There might be some registry hacks you can do to make it so it will say the complete number just from a quick tap but I myself try and stay from dinking around with the registry. I would still say voice command trumps anything that a voice tone numeric pad would do... I either use the contact page in sense or just use voice command to dial a number I want. Seems to work just fine AND easier!
OK, if you're saying it was a function of the LG dialer, that makes more sense. It did use a completely different voice from VC.
I appreciate the link to the program you gave me. I'll probably end up using it. Would be nice if the instructions were clearer on how to install it and where to put the contents of the zip archive. Thanks again.
OK, I found a way to make this work, but with the pleasant woman's voice I wanted. Go to this site:
http://www2.research.att.com/~ttsweb/tts/demo.php
Try the sample voices until you find one you like. Then put in the numbers like this: one, two, three...etc. Don't forget star and pound. The commas are important as they give a pause between each number that will help when editing them into separate files. Click download and you will have a wav file with all the numbers spoken aloud. You can convert it to mp3 format or go to the next step. Open it up in a wav editor and chop each word individually and save it to your hard drive with the proper name. These sound so much better than the files included in the post about Talking Dialpad and you can get them in the language of your choice.
Here's the syntax I used. It gives you a 1 second gap between each number making it easier to edit. Copy and paste it into the box.
<Break time="1s"/> one<Break time="1s"/> two<Break time="1s"/> three<Break time="1s"/> four<Break time="1s"/> five<Break time="1s"/> six<Break time="1s"/> seven<Break time="1s"/> eight<Break time="1s"/> nine<Break time="1s"/> zero<Break time="1s"/> pound<Break time="1s"/> star
I used Crystal's voice. If someone wants to host it, I will zip the sound files and e-mail them to you.