Related
I tried to set up a set of BT Stereo Headphones in a shop the other day to test them. We couldn't get them to go so we could listen to mp3s. I use GSPlayer.
Has anybody done this successfully? How do you tell the Magician (WM5) to output the sounds to the bluetooth headset and not to the normal headphones audio output socket?
many thanks,
Zaine.
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Bewdiful.
Bewdy mate.
Thanks very much, that seems to do the trick. It works with my normal headset now. I'll go back to the shop now and test those other headphones.
The auto toggle seems to work OK as well, btw.
Once again, thanks a million.
Good deal. I gotta try this out. Will this work w/ the Wizard?
It doesn't work with my Magician + BHCS BT Patch...
I've read plenty of threads about this. For Magician, A2DP is WMP only. Doesn't work with anything else.
Mind you, this is what everyone else has said. I have not tested this myself.
I can confirm that, in my experience.
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Ik am succesfull with the standard WMP though. It plays all bitrates, and only rarely stutters... So when I use WMP, I am satisfied!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Nice triple post! But...
bobgorila said:
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Click to expand...
Click to collapse
Yeah, I got this all the time, espically if I fast forwarded and rewound. And I was re-encoding mp3s to different bitrates, constant and variable without much success.
"Damn WMP and it's lack of features! The stupid thing can only play MP3s... and... WMA..."
I did a few test re-encodes to WMA 9 (not 9.1) @ 192 and now I get those burps and crackles every ... ten minutes? Half an hour? Definitly not every... what, twenty seconds to a minute.
If this is a problem for you, try re-encoding to WMA 9 @ 192. I use dbPowerAmp http://www.dbpoweramp.com/
ooff! took me about 2 and 1/2 days to re-find this thread again!! can we get a sticky on this????
used this on my Wizard (aka mda) and my Moto H3 and now can listen to my tv shows on the train w/my bt headset!
thanks!!!
I got a Unable to Open bluetooth audio gateway or something, though my headset is connected...strange.
blue tooth program
thefrioman said:
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Click to expand...
Click to collapse
There is three icons one for audio off and one for audio on and one for toggle.
I ran one at a time but after 15 or 20 minutes I loose blue tooth connections and the communications manager freezes and when I click on the blue tooth Icon in settings it does nothing, I have to turn the mda off and then I can listen over the blue tooth again, but after 1or 20 minutes it does it again.
can you help?
help
is there any one out there
BT Audio User Problem
I downloaded BT Audio and installed the three .exe files on my 8525. Soft reset the device and then toggled the audio on.exe. Sound still coming out of the speaker and not the BT headset.
I do have the BT-620's and they work fine (even before the BT Audio install). I am trying to accomplish being able to listen to WM without having to lug the BT-620's around all the time.
I am wondering if having the 620's software is conflicting with BT Audio?
Also, I think to get the audio stream to play to the headset, one has to activate the voice dialing feature from the headset? I can get the sound to play only for a few seconds when I do this. Do I need to de-activate voice dialing? If so, how?
Thanks and Happy Holidays
Wokring great with Plantranics voyer 510
Thanks for such nice software....it is working great in my mda and voyer 510 bluetooh head set.
imate JAM Arabic
Please I am needly imate JAM Arabic for Rom 1.12.00WWE .
Please help me .
and thank's for every .
NIce
Thank you so much, toggle works well, switches to calls and back
very cool.
Hi, I really need some help to solve theese:
After connecting Jabra bt620s (bluetooth stereo headset) to Artemis there are only two profiles under this device: Handsfree and Wireless stereo (i guess the last means A2DP). I can place and receive calls and listen to music in stereo, even turn volume up and down.
1. But other buttons on headset don't work No play/pause, prev/next and rewinding. So what do I need to make them work? Are there any bt stack patches for Artemis like for Prophet, or maybe some special software? AFAIK there has to be special bt profile support to make the trick.
2. How to redirect all sounds to bt headset in stereo? I REALLY want to listen to fm-radio through Jabra 620. But even when bt headset is connected to Artemis radio goes to either connected wired headset or built in speaker Is there any solution?
Thanks in advance!
BigND said:
Hi, I really need some help to solve theese:
After connecting Jabra bt620s (bluetooth stereo headset) to Artemis there are only two profiles under this device: Handsfree and Wireless stereo (i guess the last means A2DP). I can place and receive calls and listen to music in stereo, even turn volume up and down.
1. But other buttons on headset don't work No play/pause, prev/next and rewinding. So what do I need to make them work? Are there any bt stack patches for Artemis like for Prophet, or maybe some special software? AFAIK there has to be special bt profile support to make the trick.
2. How to redirect all sounds to bt headset in stereo? I REALLY want to listen to fm-radio through Jabra 620. But even when bt headset is connected to Artemis radio goes to either connected wired headset or built in speaker Is there any solution?
Thanks in advance!
Click to expand...
Click to collapse
Re:
1. In order for the controls to work, the device should support the AVRCP bluetooth profile. Not sure though whether the Artemis supports that profile, and in any case this would not mean there would not be other issues.
2. Do you mean that the no sound is received by the Jabra, or that it is being received in mono? If the latter there is a registry change to a 'JointStereo' setting that should do the trick.
leon100 said:
Re:
1. In order for the controls to work, the device should support the AVRCP bluetooth profile. Not sure though whether the Artemis supports that profile, and in any case this would not mean there would not be other issues.
2. Do you mean that the no sound is received by the Jabra, or that it is being received in mono? If the latter there is a registry change to a 'JointStereo' setting that should do the trick.
Click to expand...
Click to collapse
1. I guess that AVRCP bt profile is NOT supported on Artemis by default. The question is what can be done to somehow add this profile to Artemis. Applying some patches or something...
2. I mean that no sound is received by the Jabra. Sound goes to either wired headset or built in speaker.
AVRCP IS supported by the Artemis.
You need to make sure the player that you use supports as well. I have tried WMP and PocketMusic, and they both support it. Works great with my Jabra320s.
All my sounds are transfered automatically to my BT headset.. system sounds and my GPS program (MapKing) sounds.
Radio CAN NOT be run unless you have a wired headset inserted, as it acts as an antennae. Even so, I doubt sound will come to your BT headset. It just acts that way.
CHeers.
MasK said:
AVRCP IS supported by the Artemis.
Click to expand...
Click to collapse
Indeed it is. It was Mort player's problem. Last release version doesn't support control buttons, but final available beta does!
MasK said:
All my sounds are transfered automatically to my BT headset.. system sounds and my GPS program (MapKing) sounds.
Click to expand...
Click to collapse
Is is not ALL sounds, because radio sounds are not going in!
MasK said:
Radio CAN NOT be run unless you have a wired headset inserted, as it acts as an antennae.
Click to expand...
Click to collapse
Sure thing I do plug the wired headset in. But sound goes to either built in speaker, or wired headset.
MasK said:
Even so, I doubt sound will come to your BT headset. It just acts that way.
Click to expand...
Click to collapse
I REALLY hope that there IS the way at least to redirect radio output to bt headset instead of built in speaker. Maybe registry tweak or some special software.
So research on this topic continues!
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
MasK said:
AVRCP IS supported by the Artemis.
You need to make sure the player that you use supports as well. I have tried WMP and PocketMusic, and they both support it. Works great with my Jabra320s.
Click to expand...
Click to collapse
Mask...I'm using same Jabra 320s as you. I am having a problem however. the music is skipping kind of like a scratched cd. Also the music intermintently speeds up and slows downs. Do you have this problem? Any ideas how to solve this?
MasK said:
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
Click to expand...
Click to collapse
Well, I gave it a try, but didn't download Microsoft .NET Framework 2.0 yet. On fist try it doesn't do the trick Maybe because of lack of that MS thing. I'll get and try it later.
Thanks for helping anyways!
zen123 said:
Mask...I'm using same Jabra 320s as you. I am having a problem however. the music is skipping kind of like a scratched cd. Also the music intermintently speeds up and slows downs. Do you have this problem? Any ideas how to solve this?
Click to expand...
Click to collapse
Whoa.. the speeding up and slowing down is little.. but noticeable. I didn't know anyone else would notice it.. hehe
Yes.. I do have that.. it happens especially after the pause.
I set my BitPool value to "45".. which has very little noise, but hardly skips. The thing is, I feel that if I make sudden moves or go further than 2 metres without a straight line of sight, the music will get cut off
Higher bitPool value will increase quality, and pauses.
How about you? What is your bitPool value?
Set to 45 aswell also do notice a high freqency wail in the background.
zen123 said:
Set to 45 aswell also do notice a high freqency wail in the background.
Click to expand...
Click to collapse
Yes it does.. but I'm outdoors and commuting most of the time when using the headset, and thus that level doesnt bother me much. It's a balance I would say.. But could be better..
If you do find a good tweak to increase the bitPool without skipping, do lemme know
MasK said:
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
Click to expand...
Click to collapse
I was looking for a way to do this, and this worked first time - thanks
I'm just using a mono headset - but it's fine
Heya,
for a long time i have been looking for some decent bluetooth stereo headset.
now it has come down to two models. well, actually one only
my choice: motorola s9
and the second possibility: Motorola T820
from reading the comments on amazon on those devices i realize that my phone needs to be A2DP compatible to get the best sound out of the headset.
i use s2p as music player and i know it is A2DP compatible... but is real question is: is my phone (HTC P3300 WM6) compatible with this tecnology
also: if you can suggest any other good headsets, please do so.
key features i seek:
- able to use on my phone and pc
- a2dp
- good sound and microphone quality
a2dp not working
Hi,
I have HTC artemis. I recently purchased wireless bluetooth stereo headsets (Jabra bt325)
I cannot connect it to use as wireless stereo. Its working fine as handsfree. After pairing, I cannot see wireless stereo option. Its Greyed. I know that artemis is A2DP compatible.
But i am sure that headset is fine because I tested it with n95 and it worked fine.
Please give me a solution.
Try this:
Start - settings - connections - bluetooth - and add new device
If your headset is already added, use your stylus and press on the bluetooth headset name until the following menu comes up:
Edit
Delete
Set as Hands-free
Set as Wireless Stereo
Choose no. 4
yes it is.
I'm using Dopod M700 which is the P3300 w/o the GPS module.
It works with dell BH200 BT stereo headset and also the o2 BT stereo earphones.
It works on joint stereo in WM5 and since its now running WM6.1 its real stereo.
Dell BH200
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
sameerbs said:
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
Click to expand...
Click to collapse
might be a specific problem of your headset model.
i use a motorola s9 and it's quite nice. fits nice, does not disturb after hours, controls work fine, calling works fine...
BUT (and there's always a but) it has some major drawbacks i found out. while it's still nice to listen music without wires, i encounter this problems. which MIGHT be due the phone, not the headset... but i have no way to test that.
so, basicly, P3300 + motorola S9 through A2DP:
- insides works like a charm. phone in my belt, headset on. music cuality nice with some small music interrupts every now and then (maybe once per 5 minutes). phone calls nice and i can hear and they can listen me well.
but my oh my when i get on the street...
- constant music interrupts every 15 seconds. i have hang the phone around my neck so it's where my chest is to not get interrupts so often (still get one every 2-3 minutes)
- as the mic is where the ear is, if i have a call, it's impossible to hear me due the background noise. this also applies to the underground/metro. it's not that bad in a bus
and well. without A2DP enabled my music player uses so little resources the phone still works fine...
if A2DP is enabled, the phone gets REAL slow and the battery drain is MASSIVE.
when this motorola S9 break... i'll get another model to test. and when that breaks i'll probably get back to some nice wired ones (unless the CPU issues and the battery drain on the phone gets solved) ... but maybe i actually change the phone before that happens. who knows.
My opinion is that the bluetooth audio quality on the HTC Desire is terrible!
When playing music, in most of the tracks I hear clicking/crackling noise when some frequency/dB/something else is reached.
To illustrate what I mean, I have uploaded an audio fragment in which you can hear a similar noise.
Download fragment (MP3) Warning! it's drum n bass
You can hear the sound at the very beginning and at around 6 seconds (and at the end). As if a tweeter (speaker for higher frequencies) get overloaded.
I don't know if it is related to the phone's hardware, (radio) firmware or the Android OS. I've tried different music players, radio firmwares and custom roms. I also enabled an equalizer for bt audio using DSPManager. Unfortunately, nothing helped
edit: Using current versions of DeFoST or OpenDesire (and maybe others), the bt sound quality is how it should be! Fixed for me, but I hope an update from HTC will do the same.
Btw, this crackling/clicking is not only related to the HTC Desire, I have heard it on more (non-android) phones that were connected to my bt audio setup (in car). Unfortunately I haven't been able to test other Android phones, but my old Nokia N82 and SE K800i always sounded clear.
My guess is that it's just a non-controllable system setting of Android to solve the problem, but I don't know where (config/settings files?) to search for BT audio settings.
Any ideas?
That's the typical audio quality of a mediocre A2DP device: give a try at a Sony Ericsson MW-600 headset, you'll see what an Hi-Fi Bluetooth device is.
@ngel said:
That's the typical audio quality of a mediocre A2DP device: give a try at a Sony Ericsson MW-600 headset, you'll see what an Hi-Fi Bluetooth device is.
Click to expand...
Click to collapse
I'm running Defrost rom now and the sound quality is perfect, how it should be! So, it's not related to the audio device, or the default settings/drivers of the Desire are "too good" for my audio device (Pioneer BT unit @ car audio), which I think is not the case, since I also had this noise on my Logitech Pure-Fi.
@ngel said:
That's the typical audio quality of a mediocre A2DP device: give a try at a Sony Ericsson MW-600 headset, you'll see what an Hi-Fi Bluetooth device is.
Click to expand...
Click to collapse
Actually I recently owned this headsert but the quality of the sound was still terrible. I thought it was a problem with the headset at first, but that is not the case. I returned it and bought a Jabra BT3030 and the problem still persists. Anyone know if this is actually a problem with the phone or is it software related? I can add that I don't hear these noises when streaming audio through e.g. the youtube app, only mp3 and it doesn't matter which player I use (I've tried loads).
I have the jabra dogtags, audio playback sounds exactly the same as when my headphones are plugged in direct (tested it several times, culd not tell the difference), except that I have a louder volume via the jabra, which is all good as I listen to drum and bass also. Mabey device fault?
It is software related. Using current DeFroST or OpenDesire roms (and maybe others), bluetooth audio is great
CONTACTMC said:
I have the jabra dogtags, audio playback sounds exactly the same as when my headphones are plugged in direct (tested it several times, culd not tell the difference), except that I have a louder volume via the jabra, which is all good as I listen to drum and bass also. Mabey device fault?
Click to expand...
Click to collapse
well if it would've been device fault you'd think that I'd hear that noise through youtube streams as well.
But yeah as tutti-frutti stated it might be a software issue, which points me towards a root. But since I'd rather not root atm, anyone knows any other solution?
Might try a hard reset first and hope for the best. I will get back to you on that .
Thank you so much for describing my problem!!
I am currently downloading OpenDesire. Just in case that it does not work, where do i find DeFost??? I can't find it on the Market.
Thanks again!
I have Samsung Epic 4g.
nope Desire's Bluetooth audio quality is good in fact Awesome..!!
-May be the problem is not with the phone, its with Bluetooth head set you are using.
-My suggestion is to use Nokia or Motorola A2DP Stereo head phones
-I'm using Motorola motorkr S9 hd ,,,its awesome..!!
-Try this ,,it might work
harish.awe said:
nope Desire's Bluetooth audio quality is good in fact Awesome..!!
-May be the problem is not with the phone, its with Bluetooth head set you are using.
-My suggestion is to use Nokia or Motorola A2DP Stereo head phones
-I'm using Motorola motorkr S9 hd ,,,its awesome..!!
-Try this ,,it might work
Click to expand...
Click to collapse
For me, it is an issue with my car, not headphones.
A little UP!
Having the same issues with a Nokia BH-504 headset. Music quality is poor with every Sense ROM (original, rooted, Sense HD, whatever), sound like the tweeters are overloaded.
Definetly not a problem with the headset, it sound perfect with HTC Legend.
Tried to switch to non-Sense ROM (DeFrost, OpenDesire, etc.). The quality is perfect, but music play stops every 1-2 minutes for a second. Very irritating. Anyone experienced this? Is this a problem with my Desire, should I send it for warranty? (Don't want to send without enough evidence, don't wanna be without a phone for weeks...)
Okay, update: Tested the new Gingerbread AOSP and still having these stops at 2-3 minutes. Very strange...
Anyone any idea? Can I debug the bluetooth transfer somehow? Logcat didn't really show anything... Can it be a fault of the phone?
Chapell said:
Anyone any idea? Can I debug the bluetooth transfer somehow? Logcat didn't really show anything... Can it be a fault of the phone?
Click to expand...
Click to collapse
You need an sd r/w-buffer fix in kernel to stop that. I don't know if it comes with any senseless rom though. Maybe you could try the lite version of baadnewz hd rom.
Sent from my HTC Desire using XDA App
Ik Desire said:
You need an sd r/w-buffer fix in kernel to stop that. I don't know if it comes with any senseless rom though. Maybe you could try the lite version of baadnewz hd rom.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Thanks, I'll look into it. But if that's the problem, it would affect music playback with wired headphones too, isn't it?
And with Sense ROMs I have the overloaded tweeter-like problem, but no stutters. With non-Sense ROMs I have beautiful audio quality but music stops for a second randomly.
Update: Checked Aura ROM with sdfix, no problem with stuttering, but still the overloaded high-frequency problem. Meanwhile I checked that this SD fix is available only for Sense ROMs because it's HTC's hacking, the AOSP versions have no SD problems.
Oh, good lord! I was nearly to believe that I'm some sort of audiophile!
I'm using Plantronics 903 with my Desire and sound quality is just OK (I'm using SENSE ROM, will try OpenDesire in a bit). However, I cannot say I was expecting more.
What funny is happened today: I paired my 903 with PC today - sound quality was nearly same like my Desire, then I noticed someting in Bluetooth Setting Panel of PC. There was a combo box which labeled as "Audio Quality" and it was at the "Low" setting. I switched it "High Quality" and reconnected the device and voila! The sound has been thousands of times better!
Now I'm wondering if such a switch is also available in Desire? Maybe not obvious, but a Kernel variable perhaps? Damn that I don't know a sh** about programming these devices :'(
EDIT : Funny - I think that setting was not of PC's, but Headset's! It's quite well right now! And I didn't even try OpenDesire yet!
Chapell said:
A little UP!
Having the same issues with a Nokia BH-504 headset. Music quality is poor with every Sense ROM (original, rooted, Sense HD, whatever), sound like the tweeters are overloaded.
Definetly not a problem with the headset, it sound perfect with HTC Legend.
Tried to switch to non-Sense ROM (DeFrost, OpenDesire, etc.). The quality is perfect, but music play stops every 1-2 minutes for a second. Very irritating. Anyone experienced this? Is this a problem with my Desire, should I send it for warranty? (Don't want to send without enough evidence, don't wanna be without a phone for weeks...)
Click to expand...
Click to collapse
I have similar sound issues on non-sense roms. I believe it's mostly to do with range is just not quite as good as with sense based roms. I haven't had time to really figure out why yet.
Okay, so they replaced my Nokia BH-504 headset with a new one, still the same issue with Desire Sense ROMs but Legend Sense is still good. So it's not an issue with the headset (well, could be a general incompatibility problem, but I don't think so) Will check my laptop and a Gingerbread ROM on the Desire. Okay, conclusion after further tests with the replaced headset:
with Desire Sense ROMs: horrible quality in the high frequencies with every MP3.
with Desire non-Sense ROMs (OpenDesire, Gingerbred, etc): Good quality, but music play stops for a secons every 1-2 minutes.
with HP TouchSmart TM2 notebook: Quality problem AND music sutter BOTH
with HTC Legend original Froyo ROM: No problem
with Sony Ericsson X8: No problem
with HTC Touch HD: Quality problem
The headset has been replaced with a new one, same errors occur.
I have no idea what's wrong. I can't believe 2 phone's and a notebook's Bluetooth chip is faulty. So this could be an incompatiblity, hooray for great Bluetooth standard specification I should try a Nokia BH-905 and a Sennheiser MM400, will try them after buy (in the store!) and hand them immediately back if there will be a problem with them
Chapell, I have the same problem as you, with the Nokia BH-504 headset. So far the headset works great with the stock ROM, LeeDroid ROMs or just about any Froyo ROM. Gingerbread-based ROMs or Cyanogen nightlies, or any of the AdamG's Oxygen ROMS, on the other hand, they all have the same issue - every 90 seconds or so there is a glitch, the audio stream skips for half a second or so - very, very annoying keeps you from getting in the mood.
My observations: it is not SD card related, youtube video with the audio part streamd through the bluetooth headset also skips (also tried an SD read-ahead zip patch - no change); also, the glitch doesn't manifest using wired headphones; it has nothing to do with CPU spikes (the music player and the BT connection were the only open applications after a fresh ROM install); it has nothing to do with WiFi being on or off; it has nothing to do with 3G/2G network being active or not, or the GPS; using a different radio also doesn't help (scenario - radio X used with N.S.A. ROM -> no glitch; the same radio used with Oxygen 2.0 RC7 -> glitch)...
My guess - as noobish as it may be - is that this issue is related to some kind of buffering in the streaming process - I compared a few bluetooth configuration files in various ROMs, but couldn't figure any setting related to buffering or such.
If anyone could help, I would be very grateful!
Thanks for the info. If I understand correctly, you had no problems with BH-504 using Sense ROMs. So no high frequency distortion, nothing. This means that my phone is definetly faulty
However it seems the non-Sense skips are not unique for me. Strange, no one uses a BT headset with non-Sense ROMs or it could be a problem only with the BH-504?
Hello. I have a Desire HD with android 2.2.1.
Last year I had a HTC Touch HD with windows mobile. I bought a chinese copy of the jabra bt3030. The sound was out of sync with any video I could play. I didn't try with other phones, anyway I didn't spend that much for the headset, so I just sold it on ebay....thinking that that's why people don't buy chinese copies. OR maybe it was a problem of the transmitter of the Touch HD...so I didn't buy anything else and stayed with the normal wired earphones instead of having another stereo bluetooth headset.
NOW
I have the Desire HD, and bought THE ORIGINAL jabra BT3030. EXACTLY the same problem: youtube, trailers from MDB, .avi TV-rips played with rockplayer ---- EVERYTHING has this horrible out-of-sync audio which makes it impossible to watch even 5 second of a video without getting crazy.
I mean is that a problem of every stereo headset? IS that too much information to be sent to the headset? What can I do to make the sound sync with the video?
I have a stock rom.
Does anyone have this kind of problem? With which phone? With which headset? Is there any support forum for the Jabra BT3030 (it is the dog-tag one) ?
Last time it was a cheap 20$ chinese copy....this time is a retail 65$ boxed jabra....and I EXPECT it to work properly...
maybe you can set up the connection as new. or reset to factory settings
what do you mean by 'set as new' ? I paired the devices today for the first time. Reset to factory settings...is something i would rather not do
BT connections have a small delay.
You can try to set some BT settings to create a smaller buffer or something...
RammY said:
BT connections have a small delay.
You can try to set some BT settings to create a smaller buffer or something...
Click to expand...
Click to collapse
for instance? which BT settings could I adjust?
About the delay: i used until now a normal mono bluetooth headset, which is not A2DP so cannot reproduce media content (music or games sound and so on). There is a paid app on the market called BT Switch. This app redirects every sound of the phone to the mono bluetooth headset, allowing you to listen to music, hear the GPS directions, watch a video on youtube with the sound on the mono headset and so on.....well, there isn't any delay. That's why i can't understand why the stereo headset has so much delay....ok, it is stereo, more informations to send and so on...but the mono one has NO delay at all.
But of course a stereo solution with good earphones is much better than a mono with the low quality sound of every mono headset, which are built only to use the phone and not reproduce any kind of media sound...