Hi all!!
I have some problems with my touchflo 3D, but I cannot find the right thread to my problem. Could you please someone help me!
I installed the TFDetacher on my new HTC HD which I bought lately, so I havent yet installed any applications before.
I installed NETCFSetupv35 on my mobile so I can be able to run the touchflo 3D.
The TouchFlo Mode in the TFD Config is set to TouchFlo 3D and with launch TouchFlo on startup.
My problem is that I don't get this TouchFlo 3D effect!! I'm still having the standard (out of the box) effect. When I assign the TF left / Right and the Today left / right softkeys, the screens turns out blank for the Today!! I have to go on start, programs and restart the TouchFlo progrma and desabling the soft keys!
As you can see, I maybe missing some basic stepas or maybe my installation was corrupted! Can anyone help me please, it will be highly appreciated!
Thanks!
OM
The instructions for TFDetacher do cover what I think your problem is, but here goes anyway...
Open TFD config, select "Menu", and then select "Load TouchFlo 3D Defaults" (or Defa... as it is in portrait.) You get asked "Are you sure", so click yes, and then click save.
Next, go to start menu and settings, and select "Today". When that opens, select the "Items" tab (at the bottom of the screen), and check boxes for all the things you want to see on your today screen. Make sure that TouchFlo 3D IS NOT checked.
When you've finished that, and closed the settings (and maybe the programs) window, you'll be on the winmobile today screen, but you should have a TouchFlo softkey. If you click that, it will run TouchFlo 3D (takes a few seconds first time you do this), and you will then have a Today softkey. That switches you back to the today screen.
If you follow those instructions, then you should have no problems. I've done it as I've been typing, so I know it works. If you do have any problems, let us know and I'm sure someone will be able to help.
Cheers,
John.
Still nothing!
Thanks John for your help!
But I followed ur steps and I've done them twice, but still nothing! I cannot get that effect! still with the same effect!
Also, I included 3 items in the today, the TouchFlo wqasnt selected. Also, the Touchflo soft key appeared, it took few seconds but then I didnt show me a softkey for today. I went to start, clicked on Today, and nothing happened. My softkeys in home are: Phone and Programs. The only way to access the Today is through Settings, and when I press ok, it takes me to Today screen, a Touchflo soft key appears, when clicked it takes me back to the standard Home.
I uninstalled the application and installed it again... funny, the touchflo softkey appeared again and I couldnt access the home, so I had to re-install it!
Also, as regards to your note:
"Open TFD config, select "Menu", and then select "Load TouchFlo 3D Defaults" (or Defa... as it is in portrait.) You get asked "Are you sure", so click yes, and then click save."
In my TFDConfig, I only have 3 tabs; About, Config and Advanced. The softkeys are Save and Cancel and they are never changed when I'm accessing the Config. Thus, I cannot find the "Menu" not even the Load Defaults.
Please note that in the About tab the version downloaded is TouchFlo Detacher v1.0.0.5 In the config tab, I can select from TouchFlo3D,2D and Custom, mine is set to 3D. The Launch at startup is selected, the After Launch is not selected. The soft keys for "Change TouchFlo Left Soft Key" and "Change TouchFlo Right Soft Key" App and Text are both emtpy. The only soft key available is the: "Change Today Left Soft Key" which is set to TouchFlo.
The Advanced Tab is all disabled, I cannot change anything, even if I had to, I don't know what they stand for!!
Any help please??!!
Thanks again!
OM
Related
I have Tytn with wm6 oficial from htc and sometimes the buttons doesnt work. The messages button, IE, Green One, Red One, but the keyboard works everytime. If I turn the phone off and than Turn it on they work for a while. Is there anything I can do to resolve this problem?
Thanks
same problem here...
or when Ichoose to wite a new next message or to read it, the screen flashes back to the home screen and then takes me where I want to go in a couple of seconds.
ttvl4447 said:
same problem here...
or when Ichoose to wite a new next message or to read it, the screen flashes back to the home screen and then takes me where I want to go in a couple of seconds.
Click to expand...
Click to collapse
Hi,
I maybe wrong but so far I think I've nailed this down to task managers installed by either the rom developer or the user that normally aren't in the base rom.
Examples: spb mobile shell, spb plus, possibly even htc task manger.
reason: if you notice spb plus has a Red X option for closing applications when you tap the X, instead of minimizing them to the background. it also brings up a quick menu if you hold the stylus too long on a scroll bar and are scrolling a page slowly using the stylus. if you have this menu drop downwhenyou lift the stylus in that brief period that you do to put it back at the top to scroll further you may end up accidently taping the close application that shows on that menu. it can be triggered by other means on screen and maybe behind the problem.
I've had similar since I run both spb mobile shell and spb plus and have been too lazy to disable the task managers since the schaps rom I run now already has htc's task manager in it by default and is loaded on boot.
try disabling all task managers the show one the top task bar and that recognise screen gestures.
*thank god for full qwerty keyboard on this hermes as i've already done 2 posts today and were this an artimis i' be crazy or not post when I'm out and just relaxing in car in the morning due to artimis doesn't have a mechanical keyboard only onscreen hahaha*
Hi all,
I apologise if this is not the right place to pose this question, but I just got a Touch HD on an Orange contract a couple of days ago, and I can't seem to be able to change the text entry method on my handset. It always stays as 'Phone Keypad', no matter which method I select, from the several methods listed: Block Recognizer, Compact QWERTY, Full QWERTY, Keyboard, etc. It's the same whether I try to make the selection by pressing the "OPTIONS" button on the phone keypad, or whether I go through Start->Settings->Input
All the software/hardware configuration on my handset is exactly as it was when I received it from Orange, so far I haven't even installed a single new program.
Any help? TIA
Hi.
Can't offer any advice as such, but can tell you that I got my HD from Orange just over a week ago, and I can change the keyboard without any problems.
I originally had a Touch Diamond, so I knew how I wanted it set up. I just brought up the menu from the keyboard at the bottom of the screen when it first popped up and did it from there.
Sorry I can't be any help, other than to tell you that you should be able to do it!
Good luck mate.
Hi,
I had the exact same problem but i wasnt too bothered but then I installed Gyrator and everything started to work.
Hi,
I had the exact same problem but i wasnt too bothered but then I installed HD Tweak and Gyrator and everything started to work. I have no idea how it worked though.
I got this phone yesterday, and I too was confused as to how I selected the different input method. Then I worked it out
It must be a bug with their firmware. You have to HOLD DOWN the centre button, keep your finger pressed and slide it up the screen to select the preferred input method. I think I did this when I was in the Compose SMS screen.
Since then, mine's stayed as I selected it - on Full QWERTY.
Hope this helps!
langauld said:
I got this phone yesterday, and I too was confused as to how I selected the different input method. Then I worked it out
It must be a bug with their firmware. You have to HOLD DOWN the centre button, keep your finger pressed and slide it up the screen to select the preferred input method. I think I did this when I was in the Compose SMS screen."
Same happened with mine. If you click on the options then you cant change it, however if you click on the box in the middle of the screen at the bottom, you can change them.. Bizarre!
Click to expand...
Click to collapse
Thanks for the replies and suggestions, guys. I've got it working for me too: by pressing the 4x4 grid-like icon at the bottom centre of the screen to bring up the keyboard, and then pressing the small upward-pointing arrowhead that brings up keyboard options. I guess that's what ultrazonixe probably means... although I couldn't get it work by sliding my finger upwards off the centre button as langauld suggested (except if incidently I did it from the arrowhead icon).
Thanks for the help!
Yes this is quite tricky till you get the idea.
Press the bottom middle button (icon of keypad) to get the keypad up, if its not already up.
Then the bottom icon changes and adds a small up arrow just to the right of the keypad icon. (nothing to do with the four arrows just below the keypad)
you have to press this small up arrow just to the right of the keypad icon and a menu pops labled "touch input settings".
its not the same one that comes up when you press the options tab which does not work.
Press the right choice eg full qwerty or whatever, and hey presto the keypad changes instantly.
same here
Yes I could change it .. via selecting the arrow next to the mini keyboard on the bottom ... but it used to reset it self every time I starsted the phone...
Now I have TouchPal.. I have never looked back.
I' looking for a typical Windows system call.
It seems that the "lock hardware keys" page option in Wisbar Advanced Desktop does not work in HD. In fact, the Home hardkey gives focus to the Windows start menu even if WAD is attached to the Today screen. As an alternative, does anybody know how could I call the builtin "Lock screen" (the one activated either from the Today plugin or by long pressing of the end key) using a command line ? I don't want to use S2U2 as an alternative to the builtin locking utility.
Thanks in advance.
No ideas ?
Since last night my t-mo TP2 has been really slowing loading up (this is AFTER "windows 6.1" green screen and "loading TF3D"....even if i touch the screen nothing moves. touch flow works fine after 5 min but Opera Mobile and other programs open very slow. screen rotation doesn't react and also parts of the screen image from previous pg remain when i go to a new program. By "quick menu", i mean the top right corner where u can get to the task manager (i do have this turned ON in my settings).
Can someone pls help me??
i really don't wanna do a hard reset so do i have any other options? THX.
okay, quick menu finally shows up after 15 min or so? it seems like everything is running smooth.
i hope this isn't normal cuz it happens to me every time i power off and turn it back on.
Eeep, I'll be watching this, I love QuickMenu! If ATT ever releases the TP2, that is..
damn no replies. i'm having the same problem with my sprint touch pro 2. loading where i can actually use and that will respond fairly quickly takes a good 5 min. fortunately, after everything seems to work fine but there are times i soft reset to clear everything and slow load, EVERYTIME.
can someone help? I have S2U2 and have tried EVERY combination of options, don't think it can be any of the other utilities I installed
QuickMenu works just exactly the way it's always worked for me on the Tilt.. I haven't ever seen it run slowly. I ran the older version at first, then installed the new version so I could increase the spacing to make it easier for finger poking, both worked just fine.
Not sure however if I used it with TF3D, I nuked that after a day. I suppose it's easy enough to switch, so I did, and still no trouble. I have it assigned to my Win key, if I want to launch the "honeycomb" I tap the Start Menu text. I use a bit of a combo of both. I don't really use any special settings, about all I set is to auto start, register win key, right arrow to close program, x button long press to close, don't mess with anything else.
Hi guys,
I was fooling around with my TP2 and started IE to see how it compared to Opera. I opened the menu and choose/ticked "full screen" to have a good comparising view to Opera. Problem now is I cannot find a way to leave the full screen anymore. Does someone know how to end the full screen mode in IE??
thanks in advance. Kuzibri
No one yet? I cannot believe that nobody has a solution for tis problem.
I think there is an option in the context menu (press and hold anywhere on the page). I can't check for sure because the new IE in WM6.5 doesn't have a non-fullscreen mode anymore, so of course there's no option.
Thanks Enisoc, that did the trick! I have tried everything to achieve this (double tapping, etc), but never thought of this simple solution!! Thnx again.
In IE: Menu, Settings, View, Mobile. This ability is one of the reasons I prefer the IE browser.
XATAGuy, the problem of the full screen mode in IE was that you could not get into menu cause it wasn't there. Only after tap and hold on the screen anywhere one could choose to "kill" the full screen mode and get back the menu option.