Hi guys,
I was fooling around with my TP2 and started IE to see how it compared to Opera. I opened the menu and choose/ticked "full screen" to have a good comparising view to Opera. Problem now is I cannot find a way to leave the full screen anymore. Does someone know how to end the full screen mode in IE??
thanks in advance. Kuzibri
No one yet? I cannot believe that nobody has a solution for tis problem.
I think there is an option in the context menu (press and hold anywhere on the page). I can't check for sure because the new IE in WM6.5 doesn't have a non-fullscreen mode anymore, so of course there's no option.
Thanks Enisoc, that did the trick! I have tried everything to achieve this (double tapping, etc), but never thought of this simple solution!! Thnx again.
In IE: Menu, Settings, View, Mobile. This ability is one of the reasons I prefer the IE browser.
XATAGuy, the problem of the full screen mode in IE was that you could not get into menu cause it wasn't there. Only after tap and hold on the screen anywhere one could choose to "kill" the full screen mode and get back the menu option.
Related
I've now got my XDA IIs and let it put O2 activeon to start with.
had a look,
then hard reset and got rid of it.
great
any problem is, no tool to go from portrait to lanscape screen orientation.
how does one get this back?
Select start, settings, system tab then select "screen" botom RH icon from here you can select screen oriantation - I know its not an on screen short cut but at least it gets it back for you, I wouldn't put the O2 active on the device it caused me nothing but trouble, I fail to understand why O2 sell the device with a rubish software load - Mike
Aother way if you want an on screen icon is to load up Omega One Batery Pack Pro. This will put the battery strength meter back onto the screen as well as other useful information, but in addition it loads "programe Bar" from here you can have short cuts to practically anything on the device - I have just tried it so I know it works - Mike
I've mapped my t-zones key (3rd from the left on the bottom row) to flip orientation.
Perhaps you could try that. :wink:
PHM tools does a free tool as well.
V
tap start - settings - personal - buttons.
from there u can reset hard keys to what u want. i have the home button stored to this, the first button above the call button.
When i was using IE once, i tried to view it in full screen, by clicking on..... full screen. it went to full screen, but then i can't do anything with it! Each time IE is opened now, it goes automatically to fullscreen and i can't actually use it at all i have htc mobile.htc.com on the screen and that's it! No icons, nothing happens when i touch the screen
Has anyone else experienced this? and how can i fix it??
hope someone can help
thanks!
I don't use IE as Opera is much better, but mine does the same, apparently no way to exit full screen without hitting one of the hardware keys to get out of it completely!
Philio25 said:
I don't use IE as Opera is much better, but mine does the same, apparently no way to exit full screen without hitting one of the hardware keys to get out of it completely!
Click to expand...
Click to collapse
so that means I can't resolve this?? and ie is totally unusable?????
i agree about opera being better tho, i wasn't really using ie much, but i just hate having something that i can't actually use at all!!!
Sorry I'm being a dumbass.
Was getting confused cause the WM6.5 ROM on my HD is different (automatic full screen with button in corner) and I've only had the TP2 a week!
Tap and hold while full screened in IE to get the menu, select full screen again to go back to normal windowed mode
Shows how much I use IE
well of course that was the simple thing to do and i didn't do it!!!! gahhhh!!!
thanks!!!!
Since last night my t-mo TP2 has been really slowing loading up (this is AFTER "windows 6.1" green screen and "loading TF3D"....even if i touch the screen nothing moves. touch flow works fine after 5 min but Opera Mobile and other programs open very slow. screen rotation doesn't react and also parts of the screen image from previous pg remain when i go to a new program. By "quick menu", i mean the top right corner where u can get to the task manager (i do have this turned ON in my settings).
Can someone pls help me??
i really don't wanna do a hard reset so do i have any other options? THX.
okay, quick menu finally shows up after 15 min or so? it seems like everything is running smooth.
i hope this isn't normal cuz it happens to me every time i power off and turn it back on.
Eeep, I'll be watching this, I love QuickMenu! If ATT ever releases the TP2, that is..
damn no replies. i'm having the same problem with my sprint touch pro 2. loading where i can actually use and that will respond fairly quickly takes a good 5 min. fortunately, after everything seems to work fine but there are times i soft reset to clear everything and slow load, EVERYTIME.
can someone help? I have S2U2 and have tried EVERY combination of options, don't think it can be any of the other utilities I installed
QuickMenu works just exactly the way it's always worked for me on the Tilt.. I haven't ever seen it run slowly. I ran the older version at first, then installed the new version so I could increase the spacing to make it easier for finger poking, both worked just fine.
Not sure however if I used it with TF3D, I nuked that after a day. I suppose it's easy enough to switch, so I did, and still no trouble. I have it assigned to my Win key, if I want to launch the "honeycomb" I tap the Start Menu text. I use a bit of a combo of both. I don't really use any special settings, about all I set is to auto start, register win key, right arrow to close program, x button long press to close, don't mess with anything else.
Hey everyone!
This may seem a tad bit of an odd question but follow me here. My touchscreen is currently just...dead. have an RMA in but in the meantime ive gotten pretty good at getting around just using the keyboard. Problem is I cant seem to find any way to select the two options at the bottom that i would normally just touch when a popup comes up. ive tried to hit enter and ok along with a ton of other keys but nothing seems to work. for example right now im on the carrier selection screen for NRG rom and cant obviously touch "next" to proceed. what really blows is when i see an option for "tap ok to continue" and just pressing the OK key doesnt work. Guess this is maybe a challenge in a way too. see if you can change settings, go through menus without touching the screen. Thanks all!
bamonkey said:
Hey everyone!
This may seem a tad bit of an odd question but follow me here. My touchscreen is currently just...dead. have an RMA in but in the meantime ive gotten pretty good at getting around just using the keyboard. Problem is I cant seem to find any way to select the two options at the bottom that i would normally just touch when a popup comes up. ive tried to hit enter and ok along with a ton of other keys but nothing seems to work. for example right now im on the carrier selection screen for NRG rom and cant obviously touch "next" to proceed. what really blows is when i see an option for "tap ok to continue" and just pressing the OK key doesnt work. Guess this is maybe a challenge in a way too. see if you can change settings, go through menus without touching the screen. Thanks all!
Click to expand...
Click to collapse
Try installing MyMobiler - freeware utility that will allow you to control your phone from your computer and it allows for the softkey press through menus. That's all I have for you, maybe someone else has a better solution
wow. strangly that was the one thing i had just found today..and was actually the only thing so far that has let me install some of these apps i need to try to help me do things..."better?".
Hey Guys
after unlocking my Bootloader last Week, i cant find the setting to activate Dual-Window-Mode, i couldn't find a solution with the search function and google either.
When i first got the phone, it was just there sitting in the recent apps list, next to the "Clear All" button, and i was also able to add a shortcut for it to the navigation bar.
Has anyone else experienced this or does know how to get it back?
Would apreciate some help,
Greetings from Germany
Tom
That is strange. It should be there. I have a dual window button there and also as one of my permanent buttons at the bottom of the screen along with home, back and recent. To do that go to settings, display, home touch buttons and then button combination. You should be able to add a dual window button there. Doesn't answer your question but should help you use dual window.
Thanks for your help, but it just was not there
After flashing my older backup of the /system partition it decided to show up again, so everything is fine now