Error 0xc0000142 while trying to run SoftSPL before flashing Wizard - Upgrading, Modifying and Unlocking

ive been currently trying to flash new touch HD rom downloaded from Xda-dev
i tried to use softSPL method provided in this thread
http://wiki.xda-developers.com/index...0for newbies
however... when i try to run either hardSPL or softSPL (tried both and on 3 PCs) in all 3 cases i get all the time the same error
cecopy.exe application error
problems with initiation error 0xc0000142 click OK to close the application
just regular windows error :/
the hell whats the problem ive been googling for few hours for solution to this error and all i could find was some bullshitting about administrator rights (lol i have one acc on my pc )
what can i do :? ehhh
reinstalled windows :/ fresh installation
drivers + active sync .... still the same issue :/
any ideas ?

Related

Serious Problem here guys...

So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
Looks like a problem on your PC... (I mena for the Customruu crashing)
newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
Had this happen to me. I downloaded .net framework 3.0 from the M$ site and then it worked fine.
Maybe that will help you.
Jim
Need more info?
newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
Ok, first off, this is not a flame. It's an education, ok?
When posting a problem, it's best practice to let us know your:
Model of phone
Radio version
Boot Loader version
OS on your PC
ActiveSync version (s/b 4.5 by now)
Then, and only then, will you be able to get some intelligent answers. You also need to follow the link in my signature and there you will find answers.
If you're still stuck, usually re-downloading the RUU will result in a working ROM patch, unless you have other PC issues. You really need to fix that first, and the guides posted here are FULL of the diagnostic and troubleshooting steps that will propel you to a successful resolution.
Please read those posts, add your info, and you may be extremely pleased with the results.
Good reading!
newnoise1024 said:
So i downloaded WM6 Black 2.0, and its constantly crashing, so i wanted to re-install it and see if that helped.
now whenever i try to launch the file, i get an error message that states
"custom RUU has encountered a problem and needs to close. we are sorry for the inconvenience."
So im wondering what changed that wont allow me to run the ruu file? Im kinda freaking out here because i need to get my phone working! its constantly crashing on me!
i hope someone knows a fix for this, i tried to search but came up with nothing
Click to expand...
Click to collapse
First off; relax. At least the problem isn't with your phone. It's a heck of a lot easier to fix a PC.
I assume you've already tried to re-download the file?
Did you completely reboot your PC? Shut it down to power down, then restart. Make sure you don't have any extra USB stuff plugged in (like cameras, etc). If you have a PS/2 mouse and KB, use those, and not USB versions. One trick is to have the USB bus on your computer completely empty except for your phone.
Head over to Microsoft's site and download a fresh version of Compact Framework .NET (3.0 is the current version). Reboot after installing it -- even though it doesn't tell you to.
Run Windows Update. Make sure you're OK on those.
If that doesn't work, try downloading another ROM (OS only) -- like the Cingular Black 2.02 or the LVSM ROM, and see if that works.
You can also strip it apart -- use WinRAR to open the EXE file that you've been executing and extract the .nbh file from the EXE. Then go and download this guy: http://wiki.xda-developers.com/index.php?pagename=Hermes_CustomRUU and extract it into its own folder. Copy that .nbh file into that directory, and execute the executable -- it will flash your phone with a known good flasher.
But.... stepping all of the way back ... if the ROM doesn't work on your phone, it's very likely reflashing it won't help a single bit. Those ROM's are checksummed when they go on the phone -- if they're corrupted, they won't load right in the first place (and you'd end up with a boot-loader only phone). Soo... uh.. first, reboot/clean USB, then try a different ROM.
Last resort will be completely reinstalling Windows XP. I've had to do this several times because Windows will get in some weird state and it refuses to flash my phone. I finally gave up and started flashing on my Mac using a Windows virtual machine -- it's a lot easier to restore my Windows system to a working point when I do that.
Thanks to everyone who gave a response!
Here's all the information i was asked to post ( i will remember this for next time)
Cingular 8525 HERM100
Radio version: 1.40.30.00
Boot Loader version: (Not quite sure what this is?)
OS on your PC: Pro Black 2.0
ActiveSync version 4.5
I have redownloaded the ruu about 3 times and it has failed everytime.
Restarted the PC, disconnected everything from my laptop, realized that i havent installed Framework .NET 3.0, ( although i have it on my phone as i needed it to run hitchhiker)
So i'm going to download framework .NEt 3.0 and run it.
As for my phone, i uninstalled all the apps, hard resetted and everything is working fine right now, hasn't froze at all since yesteray, so im going to wait it out and see if something happens again.
Thanks again to everyone!! This forum is really really helpful.
-Matthew
How to determine the bootloader version
newnoise1024 said:
Boot Loader version: (Not quite sure what this is?)
-Matthew
Click to expand...
Click to collapse
You need to have a look at your user guide, as it states how to enter bootloader and check the version. Otherwise press and hold the left OK button and the power button at the same time, then hit the reset button with your stylus. You will enter a tri-color screen. This is bootloader mode. Jot down the numbers and compare against the below link.
Exiting is simple, press the reset button with your stylus.
Here's a valuable link for updating your bootloader.
Bootloader Version: SPL-1.40.01pro
IPL-1.01
i just tried to install Framework .NET 3.0 and got this error message
[04/20/07,08:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:35] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed.
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
i uninstalled any previous version, is there something i'm missing?
.Net Framework co-existence
newnoise1024 said:
Bootloader Version: SPL-1.40.01pro
IPL-1.01
i just tried to install Framework .NET 3.0 and got this error message
[04/20/07,08:50:20] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:35] Windows Communication Foundation: [2] Error: Installation failed for component Windows Communication Foundation. MSI returned error code 1603
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Windows Communication Foundation is not installed.
[04/20/07,08:57:54] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 was not attempted to be installed.
i uninstalled any previous version, is there something i'm missing?
Click to expand...
Click to collapse
You're probably missing version 2.0 of the .NET framework. .NET Framework is to be left in place once installed. You should have left V 2.0 installed and added .NET 3.0. Go to www.microsoft.com/net and get version 2.0 redistributable re-installed on your machine. (If you can). If you cannot, search the KB and you may get by without rebuilding your OS.
"Head over to Microsoft's site and download a fresh version of Compact Framework .NET (3.0 is the current version). To be extra safe, go into Add/Remove Programs and uninstall any existing versions -- reboot -- then install the new CF Framework. Reboot after installing it -- even though it doesn't tell you to."
this is the advice i was given in this thread, so i uninstalled version 2.0 before installing version 3.0.
So am i screwed now? lol
Well, version 3.0 just installed successfully... does that mean i still need to install 2.0? or am i fine just running 3.0?
Sorry for all the questions, i just want this fixed :/
You should be good. Give it a go.
If not, just dl .Net CF2 and install that. I think you are fine now though.
Edit: never mind
version 2.0 installed fine
Thanks everyone

Having trouble upgrading to WM6

I have an 8525 and I am trying to upgrade to HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe and I keep getting the same error message. "Error 264 The Update Utility cannot connect to your PDA Phone. Please check that your USB/cable is connected properly between the PC and your PDA Phone " My phone is connected and everythign appears fine until I try try to update. I have even tried the guide at http://www.mrvanx.org and that doesn't work either. Any ideas?
Invalid Vendor ID
O.k. I am a little further. It starts the install and then I get the "Invalid Vendor ID" error message.
Do you have activesync installed on your pc?
Are u using vista or xp?
I'm also having a problem trying to upgrade to WM6. Whenever I start the process it switches my phone into standby then as activesync can't see the phone I get an error message!
What are your answers to the two questions above? Running vista or xp? What version of activesync if any are you running?
Are your phones unlocked, CID, etc?
I don't know if it is required or not for a "official update" but have you installed HardSPL?
On another note, I would post this question into the parent thread for the rom that you are trying to install, that way you may get more looks. Good luck
Running Windows XP with Activesync 4.5 not sure about SPL?! How can i find out?
See here, http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
Read over all of this, in Re: to the hardspl, i believe its the first hyperlink listed.
Assuming that you are set on that particular rom, what I'd do is extract the rom file from the package you downloaded using winrar and then use customruu to load it on. Ive' never had any problems with it on XP. This protects against bricking as much as possible. Also just in case you haven't seen this before, flashing roms and hardspl from here will void your warranty if you need to have it serviced at any time. There is a way to get back to warranty acceptable 'standards' though. But you can't take it in as is.

Can't exit bootloader screen

Hi,
I tried to upgrade my XDA using Ranju's latest updater, the whole process failed and now I'm stuck at the BL screen "USB" at the top (when connected, otherwise it says "serial") and "v1.00" at the bottom.
My PC, SyncCentre and Windows Mobile Device Centre (I'm using Vista) all show the device as being disconnected (up until trying to upgrade everything had been fine).
As it's not showing up on my PC all of the software options for recovering it dont fail, all end with a plethora of USB not connected errors etc
I've tried the how-to on the wiki: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial to no avail.
Does anybody have any ideas? Greatly appreciated,
Thanks,
Lee
with jasjar-bl1.01-ruu-v1.2 I always restart my JJ Leave your uni in bl and start the application Good luck......
I think the Vista is not the problem this upgrade don't use AS or "in italian centro gestione dispositivi WM"
Bye
M.C.
Well, I flashed my Qtek a while ago, it failed to flash (using Vista) and doing a hard reset after it whas hanging at the startupscreen(the one with all the rom/radio numbers). No matter what I tried, following the instructions on Vista windows mobile center all failed... The good news is that your computer and your PDA still see when it is connected, ie USB/Serial, like in my case!
I then tried it on my desktop/XP, it flashed without a problem...
The funny bit is that I flashed my herald (WM6) 2 times using Vista without any problem...
I cannot explain but if U have the possibility, try and see if it works on XP...!
Good luck!
are you trying to flash it WITH your SIM card and / or SD card inside? If so, try taking them both out! It worked for me a few times!
I would start by getting rid of vista !
i had the same xprience
the different was i downgrade from wm6 to wm5 (i need the vcall)
failed in vista, succeed in xp
-> my advice : try in xp !! don't forget to remove the sd card
Manual for how to flash a rom in Vista
Read this post, you have the solution to the problem here:
http://forum.xda-developers.com/showthread.php?t=313001
You need to update the driver manually, if not, will not be able to install the driver.
You need to do this without sd/sdhc and without the sim.
If you follow these instructions, you can flash with success.
Greetings.
Kali.

RUU run problem

everytime i try to run an RUU on my computer to upgrade my ROM i get an RUUWrapper.exe - Application Error stating
'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application'
any idea why im getting this or how to fix it so i can upgrade my ROM?
ahhhhwhoa said:
everytime i try to run an RUU on my computer to upgrade my ROM i get an RUUWrapper.exe - Application Error stating
'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application'
any idea why im getting this or how to fix it so i can upgrade my ROM?
Click to expand...
Click to collapse
idk about how to fix it but u may wanna try the sd card flashing method which is found in the wiki
well it seems its only with ROMs that are custom cooked. I took it back to the windows 6 ROM released by at&t and it ran fine and everything worked, but everytime i try to run a Binkys RUU or Hermes MRH it gives me the error again...
Install the latest .net framework on your PC....this error is a classic.
all you need is .NET framework from Microsoft installed. Version 2 and above works.
Edit: What he said

Artemis noob needs help for WM 6.1 upgrade

Hello,
i just got my artemis and tried to upgarde it...
But any Rom I downloaded causes errors while flashing...
Something like USB connection error [260] and something like file corrupt error [270]...
I found also how to unlock cid but that doesn´t work to...
I use Vista and the new mobile device center 6.1 and my artemis is an german o2 version.
I get the same errors if i use XP and activesync 4.5....
Any suggestions????????????
I don´t know how to go on. And I didn´t find any Thread that helps me...
Hope anyone could help me...Thx!
Hi ,
First , i sugger you to use XP . I never can upgrad with Vista ( i have vista ultimate )
I do this with xp :
1.First be sure activ sync is active when you put your p3300 on your usb
2.Download this version of uspl (it always work for me with this version ) :
http://www.megaupload.com/?d=PTFMGKAD
3.Choose your rom . I suggest you this :
http://forum.xda-developers.com/showthread.php?t=401062
4.Unzip the first file you download in 2. You will find a file called RUU_USPL_signed.nbh. Delete it and remplace by the .nbh you dowload in 3.
5.Run start_uspl.exe
You CAN Flash in Vista
Read this thread and you wont have any problems flashing in Vista:
http://forum.xda-developers.com/showthread.php?t=313001
Just remember to remove your memory card before you flash.
dmro said:
Read this thread and you wont have any problems flashing in Vista:
http://forum.xda-developers.com/showthread.php?t=313001
Just remember to remove your memory card before you flash.
Click to expand...
Click to collapse
ofcourse u can flash with vista... even with VISTA ultimate...
jst make sure u have windows mobile device centre running... and that the pocket pc can connect to the vista pc...
i have been using VISTA ULTIMATE for the past 8 months and no problem... its cool..
Same problem
Hi,
I have the a P3300 as well, and tried to follow the same instructions, but I still get the same error 270 image corrupt, it goes to 3% and sometimes to 6% and stops giving that message.
Did you manage to get it work by any chance ????
theorthodontist said:
Hi,
I have the a P3300 as well, and tried to follow the same instructions, but I still get the same error 270 image corrupt, it goes to 3% and sometimes to 6% and stops giving that message.
Did you manage to get it work by any chance ????
Click to expand...
Click to collapse
I can't be sure but it may be something to do with XP SP3. I had the exact same problem but when I tried it on another laptop (same hardware) with XP SP2 it worked fine

Categories

Resources