Related
hi guys...noob here.... i did my best to search for this, but the search function leaves much to be desired....even the posts i found didn't give me any straight answers....
so...
i just recently upgraded to jasjamming's wm6 3.0.1 and i dloaded the esmertec java cab from the main thread....i cannot get opera mini to work correctly (keeps asking to kill) and i need to use opera for my job since PIE can't properly display the work-related page i access daily....i then tried two different intent versions and i couldn't install one of them because of permissions and the other one didn't work either for some reason....i've been in a cab/SR/reloading-my-apps haze this entire weekend and everything is a big blur....
can anyone please tell me which one works with jj's wm6 3.0.1?
thank you
hiya
has anyone got this working on their Tytn?
http://www.touch-commander.com/
particularly MDA II WM6
There are other threads on this topic. Check it out.
yes in Trinity WM6 but not in Hermes
EDIT: ok found something in development and hacking, will have a looksy
rickyjune said:
yes in Trinity WM6 but not in Hermes
EDIT: ok found something in development and hacking, will have a looksy
Click to expand...
Click to collapse
No.. It's working 100% on my i-mate JasJam.. I even have FtouchFlo installed and they work together perfectly after adding Execlude line in FTouchFlo config file
I'm running WM6 (Schap's 3.6)
lots of defect still there. way to go
Seems to work OK on my TyTN. Will continue to test.
Interesting app - lost of others have been trying to get the same thing done with limited success it would seem.
Doesn't work on my Hermes!
No Problems. It is working as expected.
I just installed it, and it is working very well and in combination with FTouchFlo, now i have a real touchflo cube that is perfectly configurabel.
i'am running shaps 3.54b GER ROM
cheerrs,
chaos42
work OK on my TyTN how can i work also and touch flo ?
I have tested touch commander on my HTC hermes. It's give a new way of navigation and you can program your own shortcuts
i have this application it is better that flash cube!!
but still it should assign to a button so i thought maybe with FTouchFlo it could be launch from screen.
any idea how to set FTouchFlo to launch touch commander?
edit the config file FTouchFloConfig.txt
DownUpApp: /Program Files/touchcommander.exe
DownUpAppCmdLine:
and it will work
yes i did it it is very cool, and faster start up with touch commander.
also i put TouchFlo shortcut in startup so even after soft reset it would work.
No luck with mine. After uninstalling, I get a message stating it's looking for touch commander.exe when I press the messaging button. I checked the button assignments in setting and button 1 is set for messaging.
Haven't found a fix yet, but that's a report on what I discovered.
New version Touch Commander 3.0
http://forum.xda-developers.com/showthread.php?t=375111
installing now, will let you know
Nah, not working 100% on my hermes. Looks promising for the future once its being tweaked a bit
HELP
I purchased the 3.0 and it has soooooo many bugs and things I didn't wan that just sucked the life out of my device like battery indicator and htc home screen ect.....then I downloaded the new 3.1 which said it fixed the bugs I had complained about but didnt and in fact made my device crash so I had to hard reset. How I was suggested by their customer support to download an ealier version so I downloaded 2.0. It is exactly what I wanted and I am so happy but now I cannot register it. My registration code doesn't work for the 2.0.
My question to all of you on here is if anyone is interested in switching registration codes???? I will give you this code for 3.0 which also works for 3.1 if you give me your code for 2.0. I have contacted their support asking them for one with no response. I need this ASAP!!! Thanks and just shoot me a message if your interested!!!
So basically your asking someone for a code to version 2 which works in turn for a code for versions 3.0 & 3.1 which don't
Update Touch Commander 3.1
Update Touch Commander 3.1
Fingertip control for Pocket PC Phone like HTC TouchFLO.
http://forum.xda-developers.com/showthread.php?t=375111
I have tried this hack on the MAKUU wm6.1 beta6 "pure" and on the Lennysh wm6.1 beta 2.1 preview for my Dell Axim x51v.
See thread here: http://forum.lennysh.com/showthread.php?t=182
Basically you need the fake phone/sms DLL hack before installing the HTC plugin.
All files found here on XDA-Devs, but forgot where. So cred to the devs that first posted the files. Found clue for hack in the "Midlet Bible" by Menneisyys.
Also the HTC Home Plugin Customizer v1.0 Final found here works great!!
-NonPaq
Update: LennySH was kind enough to combine a version of HTC Home Plugin VGA with the two DLLs included in a cab for quick and easy installation. See Post #15 for Download.
thank you very much spent a lot of time on trying to get this work
@all
you need to put the dll files in windows folder..
Awesome! Man, I've been looking for ways to get it to work. I gave up and instead, used lrToday with my own clock skin. Now, I can truly get rid of that and try this. Thanks for posting this solution!
Just reflashed with LennySH edition (2.1) and I'm having problems customizing with Home Plugin Customizer v1.0. It goes through all the options, but saving does not change the plugin. I know this used to work (just look at the image). Let me know if you able to change the configurations.
BTW, is this the best "VGA version" of the plugin? The text is very small.
Dont know what I did other than reinstalling the Homeplug, but now the HTC Home Customizer works.
I experimented with installing PocketCM again (scrolling contacts). Previously, the application would immediately bomb out with missing component error. This time it actually ran!! Unfortunately its immediately closing down after loading the contacts, but at the PCM forums it appears to be a wm6.1 problem.
Looks like these fake DLLs may also allow other phone apps to now work on our non-phone Axim. (perhaps even other non-phone devices).
(I changed Homeplug to transparent backgroung, iphone icons, and silver streak clock. All auto downloaded with HTC Home Customizer.)
nonpaq
Mine doesn't work. I copied the dll files over to the Windows directory. Installed the cab file and all it shows on my Today Screen is a line separated where the HTC Home Plugin should be. BTW - haven't install the customizer yet.
Running makuu's pure 6.1 rom.
mphayvanh said:
nonpaq
Mine doesn't work. I copied the dll files over to the Windows directory. Installed the cab file and all it shows on my Today Screen is a line separated where the HTC Home Plugin should be. BTW - haven't install the customizer yet.
Running makuu's pure 6.1 rom.
Click to expand...
Click to collapse
I originally did this on Makuu's 6.1 pure, so I dont know what is happening. Did you reboot after install? I never did not try it in RealVGA mode however.
Pst... btw, Makuu "leaked" that he will be releasing a new rom with HomePlug built in. My discovery may just be too little too late for Makuu fans.
It will not have the plugin built in, but it will support the installation natively without any tricks. I'll post the link to the rom in few minutes.
Not sure why it's not working. Maybe I'll wait for Makuu's next release. I'll stick with Moble Shell 2 for now. Thanks.
Does it works on WM6 ? (Not 6.1)
My X51v runs the Makuu WM6 FR, and I Wanted to try this homme plug for a long time.
Does it works on WM6 ? (Not 6.1)
My X51v runs the Makuu WM6 FR, and I Wanted to try this homme plug for a long time.
I wouldn't like to hard reset ...
miljbee said:
Does it works on WM6 ? (Not 6.1)
My X51v runs the Makuu WM6 FR, and I Wanted to try this homme plug for a long time.
I wouldn't like to hard reset ...
Click to expand...
Click to collapse
http://www.ppccool.com/index.php?showtopic=8352
it is a very nice looking plugin, but is it possible to change the tabs like contacts to another launcher?
If 2 or 3 tabs (on a total of 6) aren't usefull on a non-phone device, I won't have it on mine.
ok worked until I changed the theme color with mobile shell 2.. now only a seperator and free space where the plugin should be.. but I think there are better programs out there right now especially ultimate launcher
Attached is a modified cab install for the two attachments in the 1st post. Although this is the older version, I'm at work and can't post a newer version of HTC Home so I decided to go ahead and post this one for people not comfortable with copying files. Just install this cab, and soft reset.
Is there any way that the plugin grows a little bit because it is too small!
Hi All,
First of all BRILLIANT website ... keep the good work up guys ... please bear with me with a few question that i have no idea about. Thought i'd put this all in one thread rather than 4 different ones:
1) Does it actually matter which cab file (i don't know what you call it ExtRom? please let me know what exactly you call it so it's easier for me to search for in the future) to use with which version of OS? Currently i'm on WM6.5 Build 23004 WWE R7.1 and i think i downloaded some can file from WM6.1 or something
2) Where can i find TouchFlo for WM6.5 Build 23004 WWE R7.1?
3) I installed the HTC Manila2d on my XDA iis but can not seem to find it any where, do i need to install something else besides this to be able to view the application
4) Most of the time when the backlight goes off on my XDA IIs, i press the power button to bring the screen back up only to find that the screen has gone white and then i have to reset my XDA a couple of times ... to get it working i have to make sure that i'm constantly working on some app for a good few minutes before i leave the screen light to go off
Would appreciate if you can help me with this. Many thanks in advance.
1. yes it most certainly does. if you had upgraded to wm6.1 and tried an extrom of wm6.5 you would probably be disappointed that some of the programs like internet explorer, office or wm6.5 specific stuff wouldn't work. the extrom is a bunch of cabs to install certain programs after a hard reset. that's why you should have a look inside the extrom and maybe google some of the cab names and decide, whether you relly need them or not. for example, if you never use java, mss, or pdf documents, leave jbed, arcsoft and adobe reader out of the extrom and save a lot of space on your device. in general, the rom chef gives a link to the extrom, fitting the rom best, but i think the last official extrom, released by a chef was with xplode's 21202. that is the one you want to take for the newest internet explorer and office and other useful stuff.
2. what? touchflo in general means... nothing. there are 3 aspects of touchflo: touchflo3d (=Manila2d), touchflo cube and sometimes touchflo is also referred to, when it comes to finger friendlyness and touch scrolling.
to be short, the touch scrolling is always on in wm6.5 and it is also quite finger friendly. about the rest... forget it.
3. you know, manila 2d is sooo 2008
manila2d is, as you might know, opticly comparable to an animated version of htc home with a bunch of extra features, and also, like htc home (or the above mentioned touchflo cube) it is improving the today screen of wm6 and wm6.1 devices. it might also work on wm6.5, but for that to be even remotely possible, you have to lose the titanium home (default today screen plugin of wm6.5, with the sliding and all...) so go to start->settings->today->items and unselect windows default and then manila might work for you, which still begs the question:
why would you want manila when you can have titanium?
manila is slow & outdated (if you ever even get it to work, most versions won't do on the BA), while titanium is new, modern, highly customizable, hip, trendy and most important of all, works extremely fast on the BA.
4. ok, assuming that you already checked the backlight and power settings, that leaves a few other things to check:
- does it also do the white screen, if you press the power button in the first place, to switch it off and then turn back on?
- did you do anything in the upgrade process differing from "the book"?
- did you try a hard reset? if you just upgraded, you have nothing to lose?
even more stuff would come to mind, but first post back if any of the things are done so far.
greetz
Chef_Tony
Hi Chef Tony, mate honestly i really do appreciate taking your time and explaining this what was once all french to me. Ok i totally get the idea of ExtRoms and Cab file. So assuming that if i use one of the 6.1 cab files on a 6.5 it should work correct?
Apparently i downloaded Manila2D from this forum, installed it but that didn't work ... i went to start->settings->today->items and unselect windows default and but it comes up as blank screen (home screen) and also i could see TouchFlo as an option and when i select that it takes me back to the home screen saying "Tap here to activate TouchFlo", no matter how many times i tap, nothing happens. So correct me when i say this, this TouchFlo which was showing up on the options is actually a Manila2D app right? I saw a video last night on youtube which said TouchFlo on XDAiis (sorry but can't find the exact link to it) and it looked something like this http://www.youtube.com/watch?v=HJFBifvgSgA i mean the interface and the screen tapping.
As far as the screen is concerned, it never used to do this but since i've upgraded to 6.5 it has started to. I followed the exact same process what the book said because i'm the sort of a person who follows the book and nothing besides that ... besides i've hard rest it as well but that still did not help. Ok here's what happens (i think), when the device is battery powered, it will white screen when the device is not used for a few minutes (sleep mode or whatever you may call it) but it does not happen when it's on external power because it's always on any way.
in general an extrom from wm6.1 would work on wm6.5 flawlessly. but as mentioned before, the versions of the internet explorer and office changed dramatically. you should include the newer cabs there.
this tap here to activate touchflo is exactly the manila, and normally it should start up then, but as mentioned before, there is no guarantee, every version would work with the BA, but i had a version once, that worked in general, it was just a little slow and some features wouldn't work, which is perfectly normal. you should have a look at this thread and maybe try the versions given there: http://forum.xda-developers.com/showthread.php?t=340932&highlight=iolite
also you'll find other neat stuff there.
if you really want manila as your GUI, maybe you should try a nice wm6 or wm6.1 rom, because manila is really sucking cpu and ram, and with most wm6.5 roms those resources are optimized for titanium and even with titanium switched off, they just consume more hardware than wm6.1 for instance. it will run better then.
but your last sentence there is confusing me. what exactly do you mean, when you say white screen? is it actually showing all white, with backlight, or is it more like the display is off, a pale grey without backlight? if it is the first option, it seems there is actually a tiny problem there, could be together with manila, back in the day, when i ran it, i experienced sort of a third boot splash screen with manila installed and the device would take forever to boot up, soft resets were a major buzzkill then.
if it is the 2nd option, then it is perfectly normal and you can go to start->settings->system->power and set the device to never switch off on battery power, but instead just switch off the backlight.
last but not least (ok, i should have written this above): the video you posted!
the first 48 seconds don't show any manila stuff, that is called s2u2, slide 2 unlock a keylock app, you can download for free, from another forum member here, called A_C, on his site here: http://s2u2.ac-s2.com/ (all credit to A_C)
i wouldn't exactly count on the photo and video function to work on a BA either, as shown about 1:20
at 1:50 the youtube app is not part of manila either, but you can download something like that here: http://forum.xda-developers.com/showthread.php?t=385227 or the official one here: http://help.youtube.com/support/youtube/bin/topic.py?hl=en&topic=20991
i really wonder what the last app was, he showed, since i don't have sound at the moment, i can't tell whether he mentions it maybe, but probably doesn't matter anyway, because you are not looking for a paint clone, but for a nice GUI
hope this could bring you a little bit further in getting your device customized. let me know, whether everything worked out as planned.
Chef_Tony
Hi Chef Tony,
Trying Titanium on Xplode's v7.1 but cannot get my normal Today plugins selected - Pocket Breeze, Device lock, Comms, and a Programme Bar.
Is there an easy way to do this? (In M2D customisation you can set the Today page plugins...)
Thanks.
the titanium blocks everything else.
when you go to start->settings->today->items you see, by default, there is a list of a lot of plugins, but the only one that is checked is the titanium home, there called "Windows Default" for instance date and time is unchecked, which does not mean, you don't see the time in your today screen as a clock is also part of titanium. if you decide to work with m2d or other normal today plugins, you need to uncheck Windows default and then you will have access to the old today screen with the static, yet small, list of items. and then you have the opportunity to use all your today plugins. if you want to use titanium home and have plugins for that look for "titanium plugins" or "chome plugins".
and the plugins of titanium can be monitored, sorted and (de-)activated in "titanizer"
all those things in " " can be found in the forum, just have a look in development & hacking section or use the forum search
Hi all,
since I got myself one of those shiny new WP7 I was thinking what I should do with my loved Trinity. I am thinking of using it as a car navigation only for now (since there is no offline WP7 navi soft out there yett). So no phone, data, manilla or whatever needed just the navigation software. Since I always liked the resource hungry igo8 I would like to know if someone has a hint which ROM I should use best. I was thinking of a clean 6.0/6.1 ROM.
Another question would be if there is a way to have igo8 (or whatever other navi software) start right away after turning the phone on?
Thnks for any hints!
I'm not sure about the cleanest ROM. I see mentioned in some topics that tomme45i WM6.1 has a lot of free memory so it should load less stuff or have the plugins more optimized.
http://forum.xda-developers.com/showthread.php?t=551424
But maybe a better one would be the official WM6 Dopod ROM launched for Trinity. That one shouldn't have a lot of stuff and on the settings you can always disable the stuff that appears on the home screen (messages, appointments, clock, etc) to make it even faster.
About the startup, at least on WM6.5 ROMs you just need to copy the program shortcut from /windows/start menu/programs/iGo to /windows/StartUp/iGo .
Thanks alot for pointing me in the right direction! Going to test those you mentioned
Works like a charm