wm6 black 3.01 and a decent working midlet ? ? - 8525, TyTN, MDA Vario II, JasJam ROM Development

hi guys...noob here.... i did my best to search for this, but the search function leaves much to be desired....even the posts i found didn't give me any straight answers....
so...
i just recently upgraded to jasjamming's wm6 3.0.1 and i dloaded the esmertec java cab from the main thread....i cannot get opera mini to work correctly (keeps asking to kill) and i need to use opera for my job since PIE can't properly display the work-related page i access daily....i then tried two different intent versions and i couldn't install one of them because of permissions and the other one didn't work either for some reason....i've been in a cab/SR/reloading-my-apps haze this entire weekend and everything is a big blur....
can anyone please tell me which one works with jj's wm6 3.0.1?
thank you

Related

BLACK 3.0 AND 3.01 Java MIDlet not working...

Too much messages in a single topic to gain attention...
Please test it with your favourite JAVA appz and post here the results.
I've tested Gmail and Opera MINI: not working, everything was working fine with Black 2.0
Can you clarify - Was this working with Black 2.5?
philg2000 said:
Can you clarify - Was this working with Black 2.5?
Click to expand...
Click to collapse
Simply I haven't tested black 2.5. In "BIG" 3d I read other two reports on the same issue, without clear definitrion of the name of the applet.
I have only a "lamp" icon and I tested both JAR an JAD directly downloaded, without results. WM6 beta bug? JJ "optimizzation" Bug?
Other users, using the same WM6 build can help may be...
philg2000 said:
Can you clarify - Was this working with Black 2.5?
Click to expand...
Click to collapse
Simply I haven't tested black 2.5. In the "BIG" 3d I read other two reports on the same issue, without clear definition of the name of the applet.
I have only a "lamp" icon and I tested both JAR an JAD directly downloaded, without results. WM6 beta bug? JJ "optimizzation" Bug?
Other users, using the same WM6 build can help may be...
I, too, have midlets not working since the launch of Black 3.0 and 3.01. The midlets used to work back in 2.5, 2.0 and many various cooked roms available out there. I speculate that something related to the midlet manager had been modified that led to the malfunctioning of midlets.
Apart from this issue the Black 3.0 had been working wonders for me.
sergiopi said:
Simply I haven't tested black 2.5. In the "BIG" 3d I read other two reports on the same issue, without clear definition of the name of the applet.
I have only a "lamp" icon and I tested both JAR an JAD directly downloaded, without results. WM6 beta bug? JJ "optimizzation" Bug?
Other users, using the same WM6 build can help may be...
Click to expand...
Click to collapse
Same here, I got the "lamp" icon as well. My midlet is a proprietary one developed by my company and hence wouldn't be the same as yours, segiopi.
Judging from this observation, I'd say perhaps the midlet manager is treating the midlets somewhat differently than before and is giving a runtime error to all of them.
Try "mobile.cmcmarkets.com" and download a midlet from there, compare that to a few other midlet apps, they should give the same "lamp" shaped icon and would "fail to run" as we click on it.
yes me too. gmail midlet was working in black2.5, but failed in 3.0 (havent tried 3.0.1).
gmail, voipbuster, mgmaps & opera mini don't work. ( i guess no midlet will work in black 3.0 until a fix is released)
lamp icon showed in all the midlets & "failed to run" message appear when launching any midlet.
They worked fine in black 2.5.
ok guys
i have been speaking to a number of cookers and it seems that the OEM app "tao intent midlet manager" is not compatible with newer wm6 builds.
hence i have something even better for you (kudos to mUn)
a better midlet manager and support full screen applications too, opera works great on it.
download it from post #2 in my black 3 thread..
this cab will overwrite the links to the midlet manager when u install it.
hi jj, thanks for the fast response. will try it out.
thx a lot, I still using miniOpera instead of full big opera and lot of old games in JAVA.
the new midlet manager works. thanks.
*edit* the behaviour is different from the original midlet manager. although softkeys worked within gmail midlet, but sometimes need to press twice to activate. screen touch no longer working for the softkeys. and performance seems to be slower then intent midlet manager.
JJ,
Thanks for the quick response, I downloaded your new midlet manager, my apps will now install and I will be able to 'launch' them. However, a few secs after I 'launch' the midlets, it would say midlet isn't responding and gives me two options 1) Wait 2) Kill the midlet.
Would you have any other midlet managers available? I've googled around the web and noticed the midlet manager you provided is great when the midlets work; however, its compatibility is a major issue.
GMAIL MIDlet works
new midlet manager is really nice, a bit slow but nicer than intent one. it slowdown my tytn a lot when having it launched, but at least works. thx a lot JJ.
voipbuster runs fine
mgmaps runs fine
opera mini runs fine
gmail doesn't work
"sorry gmail will not work on your phone. your phone doesn't have the appropiate certificate to communicate with the server. try accesing gmail in your mobile browser at http://mail.gmail.com"
Any idea why i can't use gmail?
or how to get the appropiate certificates to be able to run it?
gmail requirements says:
the phone need a class 3 Verisign certificate with serial number 70:BA:E4:1D:109:29:34:B6:38:CA:7B:03:CC:BA:BF. it should come with the phone.
Why i haven't it? and the other black 3.0 users have it?
teorically it can be got at https://www.verisign.com/cgi-bin/support/rootcert/getrootcert.cer but i've tried it but it doesn't yet run.
any idea in how to get a valid class 3 certiificate from verisign that works in my tytn?
TIA
that's strange. gmail midlet works in esmertec midlet manager as you can see in my post earlier in this same thread.
have you tried downloading it again? or delete the old one to test? i had problem in the intent midlet manager, and to get it uninstall i delete it (somewhere hidden within application data directory) directly.
Gmail works fine
Gmail works fine here too ... only gripe is that it doesn't remember the login credentials after a SR ... but that's not a midlet issue I suppose ...
jasjamming said:
ok guys
i have been speaking to a number of cookers and it seems that the OEM app "tao intent midlet manager" is not compatible with newer wm6 builds.
hence i have something even better for you (kudos to mUn)
a better midlet manager and support full screen applications too, opera works great on it.
download it from post #2 in my black 3 thread..
this cab will overwrite the links to the midlet manager when u install it.
Click to expand...
Click to collapse
JJ,
are you sure? cos it works fine with LVSW 3.30.0.9
fourcc said:
new midlet manager is really nice, a bit slow but nicer than intent one. it slowdown my tytn a lot when having it launched, but at least works. thx a lot JJ.
voipbuster runs fine
mgmaps runs fine
opera mini runs fine
gmail doesn't work
"sorry gmail will not work on your phone. your phone doesn't have the appropiate certificate to communicate with the server. try accesing gmail in your mobile browser at http://mail.gmail.com"
Any idea why i can't use gmail?
or how to get the appropiate certificates to be able to run it?
gmail requirements says:
the phone need a class 3 Verisign certificate with serial number 70:BA:E4:1D:109:29:34:B6:38:CA:7B:03:CC:BA:BF. it should come with the phone.
Why i haven't it? and the other black 3.0 users have it?
teorically it can be got at https://www.verisign.com/cgi-bin/support/rootcert/getrootcert.cer but i've tried it but it doesn't yet run.
any idea in how to get a valid class 3 certiificate from verisign that works in my tytn?
TIA
Click to expand...
Click to collapse
I've installed 1.11 , from mobile.google.com, gmail, get faster Gmail and works
yes, i've deleted it, reinstalled it. SR. and it still doesn't work.

Touch Commander

hiya
has anyone got this working on their Tytn?
http://www.touch-commander.com/
particularly MDA II WM6
There are other threads on this topic. Check it out.
yes in Trinity WM6 but not in Hermes
EDIT: ok found something in development and hacking, will have a looksy
rickyjune said:
yes in Trinity WM6 but not in Hermes
EDIT: ok found something in development and hacking, will have a looksy
Click to expand...
Click to collapse
No.. It's working 100% on my i-mate JasJam.. I even have FtouchFlo installed and they work together perfectly after adding Execlude line in FTouchFlo config file
I'm running WM6 (Schap's 3.6)
lots of defect still there. way to go
Seems to work OK on my TyTN. Will continue to test.
Interesting app - lost of others have been trying to get the same thing done with limited success it would seem.
Doesn't work on my Hermes!
No Problems. It is working as expected.
I just installed it, and it is working very well and in combination with FTouchFlo, now i have a real touchflo cube that is perfectly configurabel.
i'am running shaps 3.54b GER ROM
cheerrs,
chaos42
work OK on my TyTN how can i work also and touch flo ?
I have tested touch commander on my HTC hermes. It's give a new way of navigation and you can program your own shortcuts
i have this application it is better that flash cube!!
but still it should assign to a button so i thought maybe with FTouchFlo it could be launch from screen.
any idea how to set FTouchFlo to launch touch commander?
edit the config file FTouchFloConfig.txt
DownUpApp: /Program Files/touchcommander.exe
DownUpAppCmdLine:
and it will work
yes i did it it is very cool, and faster start up with touch commander.
also i put TouchFlo shortcut in startup so even after soft reset it would work.
No luck with mine. After uninstalling, I get a message stating it's looking for touch commander.exe when I press the messaging button. I checked the button assignments in setting and button 1 is set for messaging.
Haven't found a fix yet, but that's a report on what I discovered.
New version Touch Commander 3.0
http://forum.xda-developers.com/showthread.php?t=375111
installing now, will let you know
Nah, not working 100% on my hermes. Looks promising for the future once its being tweaked a bit
HELP
I purchased the 3.0 and it has soooooo many bugs and things I didn't wan that just sucked the life out of my device like battery indicator and htc home screen ect.....then I downloaded the new 3.1 which said it fixed the bugs I had complained about but didnt and in fact made my device crash so I had to hard reset. How I was suggested by their customer support to download an ealier version so I downloaded 2.0. It is exactly what I wanted and I am so happy but now I cannot register it. My registration code doesn't work for the 2.0.
My question to all of you on here is if anyone is interested in switching registration codes???? I will give you this code for 3.0 which also works for 3.1 if you give me your code for 2.0. I have contacted their support asking them for one with no response. I need this ASAP!!! Thanks and just shoot me a message if your interested!!!
So basically your asking someone for a code to version 2 which works in turn for a code for versions 3.0 & 3.1 which don't
Update Touch Commander 3.1
Update Touch Commander 3.1
Fingertip control for Pocket PC Phone like HTC TouchFLO.
http://forum.xda-developers.com/showthread.php?t=375111

HTC Home Plugin working on Dell x51v (wm6.1) with simple hack

I have tried this hack on the MAKUU wm6.1 beta6 "pure" and on the Lennysh wm6.1 beta 2.1 preview for my Dell Axim x51v.
See thread here: http://forum.lennysh.com/showthread.php?t=182
Basically you need the fake phone/sms DLL hack before installing the HTC plugin.
All files found here on XDA-Devs, but forgot where. So cred to the devs that first posted the files. Found clue for hack in the "Midlet Bible" by Menneisyys.
Also the HTC Home Plugin Customizer v1.0 Final found here works great!!
-NonPaq
Update: LennySH was kind enough to combine a version of HTC Home Plugin VGA with the two DLLs included in a cab for quick and easy installation. See Post #15 for Download.
thank you very much spent a lot of time on trying to get this work
@all
you need to put the dll files in windows folder..
Awesome! Man, I've been looking for ways to get it to work. I gave up and instead, used lrToday with my own clock skin. Now, I can truly get rid of that and try this. Thanks for posting this solution!
Just reflashed with LennySH edition (2.1) and I'm having problems customizing with Home Plugin Customizer v1.0. It goes through all the options, but saving does not change the plugin. I know this used to work (just look at the image). Let me know if you able to change the configurations.
BTW, is this the best "VGA version" of the plugin? The text is very small.
Dont know what I did other than reinstalling the Homeplug, but now the HTC Home Customizer works.
I experimented with installing PocketCM again (scrolling contacts). Previously, the application would immediately bomb out with missing component error. This time it actually ran!! Unfortunately its immediately closing down after loading the contacts, but at the PCM forums it appears to be a wm6.1 problem.
Looks like these fake DLLs may also allow other phone apps to now work on our non-phone Axim. (perhaps even other non-phone devices).
(I changed Homeplug to transparent backgroung, iphone icons, and silver streak clock. All auto downloaded with HTC Home Customizer.)
nonpaq
Mine doesn't work. I copied the dll files over to the Windows directory. Installed the cab file and all it shows on my Today Screen is a line separated where the HTC Home Plugin should be. BTW - haven't install the customizer yet.
Running makuu's pure 6.1 rom.
mphayvanh said:
nonpaq
Mine doesn't work. I copied the dll files over to the Windows directory. Installed the cab file and all it shows on my Today Screen is a line separated where the HTC Home Plugin should be. BTW - haven't install the customizer yet.
Running makuu's pure 6.1 rom.
Click to expand...
Click to collapse
I originally did this on Makuu's 6.1 pure, so I dont know what is happening. Did you reboot after install? I never did not try it in RealVGA mode however.
Pst... btw, Makuu "leaked" that he will be releasing a new rom with HomePlug built in. My discovery may just be too little too late for Makuu fans.
It will not have the plugin built in, but it will support the installation natively without any tricks. I'll post the link to the rom in few minutes.
Not sure why it's not working. Maybe I'll wait for Makuu's next release. I'll stick with Moble Shell 2 for now. Thanks.
Does it works on WM6 ? (Not 6.1)
My X51v runs the Makuu WM6 FR, and I Wanted to try this homme plug for a long time.
Does it works on WM6 ? (Not 6.1)
My X51v runs the Makuu WM6 FR, and I Wanted to try this homme plug for a long time.
I wouldn't like to hard reset ...
miljbee said:
Does it works on WM6 ? (Not 6.1)
My X51v runs the Makuu WM6 FR, and I Wanted to try this homme plug for a long time.
I wouldn't like to hard reset ...
Click to expand...
Click to collapse
http://www.ppccool.com/index.php?showtopic=8352
it is a very nice looking plugin, but is it possible to change the tabs like contacts to another launcher?
If 2 or 3 tabs (on a total of 6) aren't usefull on a non-phone device, I won't have it on mine.
ok worked until I changed the theme color with mobile shell 2.. now only a seperator and free space where the plugin should be.. but I think there are better programs out there right now especially ultimate launcher
Attached is a modified cab install for the two attachments in the 1st post. Although this is the older version, I'm at work and can't post a newer version of HTC Home so I decided to go ahead and post this one for people not comfortable with copying files. Just install this cab, and soft reset.
Is there any way that the plugin grows a little bit because it is too small!

WikiPock & IE6/TF3D 2 Problems

Not sure if anyone is using WikiPock (complete offline Wikipedia) but thought I'd ask anyway -
Is anyone successfully running WikiPock with IE6 installed on their HD?
It was running fine on Kwbr's Touch of HD ROM but won't play nice on his latest Vanilla Series Topaz ROM which includes IE6 and the latest incarnation of TF3D.
Hyperlinks and the 'tap and hold' menu won't activate. Tech support have indicated that it is compatible with IE6 so just trying to narrow down the possible causes of the problem.
Thanks in advance for any help.
I don't think it is a manilla problem, but ie6. I have the same issue with tom topaz 6.5 rom without manila, and scrolling does not work. Although you can use the zoom bar on the td2 to scroll the page, the hyperlinks still don't work.
[email protected] said:
I don't think it is a manilla problem, but ie6. I have the same issue with tom topaz 6.5 rom without manila, and scrolling does not work. Although you can use the zoom bar on the td2 to scroll the page, the hyperlinks still don't work.
Click to expand...
Click to collapse
Hi Paul,
Did you get a chance to try WikiPock on the stock TD2 ROM?
Customer Support have told me that it runs fine on machines with IE6 so don't know whether it's just that cooked ROMS haven't got all the required IE modules.
It's such a PITA as I'm not prepared to revert to the stock ROM.

Pharos Traveler GPS Series (117, 127, 137)

I thought someone should start a thread Window Mobile phone series because there is very little community discussion about them. They run off the 6.1 pro version. I personally have had a some success modifying my Traveler 127. i installed M2D in landscape mode thanks to http://forum.xda-developers.com/showthread.php?t=488017 the only problem with the install with that i had to use Manila2D 1.00.1819.2926 build to get the interface itself to run but other than that, its great. i can't remember where i got that build but i still have the file and can upload if needed. But anyways I think these are great phones and with everyones help I'm sure they can be even better.
I really can't be the only person with one of these phones, can I?
superman4545 said:
I really can't be the only person with one of these phones, can I?
Click to expand...
Click to collapse
Surely not!
I have a Pharos Traveler 117.. are you like your ttraveler?
Did you have any idea about how to cook a rom for this devices?
Regards,
erickwill said:
Surely not!
I have a Pharos Traveler 117.. are you like your ttraveler?
Did you have any idea about how to cook a rom for this devices?
Regards,
Click to expand...
Click to collapse
Well unfortunately i have no idea how to cook ROM's, I'm really hoping by starting this thread that it will catch the eye of someone who can, also the more people that see this thread, the more people that may responed with new ideas, programs and interfaces that they have got to work on their Traveler.
The more we talk the more this thread stays on the first page of the forum and everyone gets to see it.
So thanks for replying, by the way what Programs or Interfaces have you tried on your Traveler 117
Hey buddy,
Actually, I didn't start to handle deeply this traveler.. I am really waiting for some good news about the resources to cook a new rom for it.. because I really don't like this current WM version.
If someone reads this and have access to this information, please post here.
Regards,
you should really the M2D interface i posted. I wasn't at all impressed with SPB Mobile Shell that came with my Traveler 127. So after about two weeks of hunting and trail and error (obviously not every second was dedicated to finding this, i do have to work for a living) I forund M2D interface (HTC Homescreen interface) which acts as a Today Screen Plugin for our WM6.1 pro devices. It's really slick and works with error. I also found an "touch and sweep" type that works with our devices that allows you to scroll like the iphone rather than using the scroll bar itself. I can post this as well if anyone is interested.
Cheers
superman4545 said:
you should really the M2D interface i posted. I wasn't at all impressed with SPB Mobile Shell that came with my Traveler 127. So after about two weeks of hunting and trail and error (obviously not every second was dedicated to finding this, i do have to work for a living) I forund M2D interface (HTC Homescreen interface) which acts as a Today Screen Plugin for our WM6.1 pro devices. It's really slick and works with error. I also found an "touch and sweep" type that works with our devices that allows you to scroll like the iphone rather than using the scroll bar itself. I can post this as well if anyone is interested.
Cheers
Click to expand...
Click to collapse
id you try to install spb shell 3.0 which comes with pharos 137 and see if you'd like it. i upgraded my pharos 117 spb shell from 2.0 t0 3.0 which works nice... but i have one set back with it. my camera wont startup.. and opera 9.7 beta sometimes act up on it. but i love the shell because it works great in every other aspect, and i do not use my camera so oftten. i'll attach the cap file . you can see if it will work for you.
you the key gen to generate serial and activate the shell.
tolexy110 said:
id you try to install spb shell 3.0 which comes with pharos 137 and see if you'd like it. i upgraded my pharos 117 spb shell from 2.0 t0 3.0 which works nice... but i have one set back with it. my camera wont startup.. and opera 9.7 beta sometimes act up on it. but i love the shell because it works great in every other aspect, and i do not use my camera so oftten. i'll attach the cap file . you can see if it will work for you.
you the key gen to generate serial and activate the shell.
Click to expand...
Click to collapse
SPB mobile shell is alright but I just find there are too many steps involved in simple operations. I have infact tried a registered copy of spb mobile shell 3.0 and still too many steps. that's why I use the M2D interface, fewer steps.
What I would really like is for someone to cook a WM6.5 ROM for these phones.
Cheers
I just bought a Pharos Traveler 137 and have already installed the Topaz Comm Manager onto it. I had to change the following registry key after installing it to:
HKEY_LOCAL_MACHINE > SOFTWARE > HTC > Comm Manager > WLAN > DeviceName=98C5250D-C29A-4985-AE5F-AFE5367E5006}\UFMP1
I'd really like to find out how similar the device is to HTC devices as far as hardware and ROM similarity is concerned. I'm experiencing some skipping during playback of MP3s that wasn't cured by performing a hard reset. It would be nice to fix that.
Cook a rom for Pharos Travler
Anyone get extract the files from official Pharos rom to cook a WM6.5 rom?
There has to be more than three of us with these phones, come guys start talking!
Have had my 137 for just over a week and it seems to be a good phone but the old bugbear of BT voice dialling not working is here. Problem is MS Voice command can be activated by pressing your BT headset but the audio is sent to the device, not the headset. Anyone have any ideas to get it working?
ROM update
Pharos released a new ROM update yesterday. it is the same 20778 build of wm with a Pharos build date date of 6/25/09. not seeing a lot of changes, the double tap effect with single press is still present and it has been reported the blue tooth and voice dial problem still exist. hopefully now that a rom has been released for download someone will start thinking about cooking for the device. first we need HARD SPL!!!
FYI: A mod for Pharos stated in the Pharos Forum that they are NOT curently working on release of 6.5 for any traveler device. i hope this was some sort of mistake.
superman4545 said:
you should really the M2D interface i posted. I wasn't at all impressed with SPB Mobile Shell that came with my Traveler 127. So after about two weeks of hunting and trail and error (obviously not every second was dedicated to finding this, i do have to work for a living) I forund M2D interface (HTC Homescreen interface) which acts as a Today Screen Plugin for our WM6.1 pro devices. It's really slick and works with error. I also found an "touch and sweep" type that works with our devices that allows you to scroll like the iphone rather than using the scroll bar itself. I can post this as well if anyone is interested.
Cheers
Click to expand...
Click to collapse
hey superman4545,
I am also looking for different options and I'm interested in your findings. If you could post them would be great. particularly curious of the "touch and sweep" option you mentioned. I myself have been using FTouchSL.
A couple of things I've installed...
1. touchpal keyboard (best word suggestion and correction options I've tried to date landscapemode is not the greatest could be larger)
2. PHMregedit
3. Opera 9.7 beta
4. s2u2 latest build found unlocking works smoother when on rawbuffer instead of direct draw but don't take my word as written in stone.
5. pandora with the "vga fix" (this could still use a lot of work but glad it plays)
6. garmin xt
7. total commander
8. FTouchSL
scrolling
i have attached htc scroll. after install navigate in the registry to HKCU\ControlPanel\Gestures\Touch\Disabled and set Decimal value to 0 and soft reset. now you will have htc kinetic scrolling that will not interfere with other programs such as pointui, mobile shell 3 of TF3D.
deadlye said:
hey superman4545,
I am also looking for different options and I'm interested in your findings. If you could post them would be great. particularly curious of the "touch and sweep" option you mentioned. I myself have been using FTouchSL.
A couple of things I've installed...
1. touchpal keyboard (best word suggestion and correction options I've tried to date landscapemode is not the greatest could be larger)
2. PHMregedit
3. Opera 9.7 beta
4. s2u2 latest build found unlocking works smoother when on rawbuffer instead of direct draw but don't take my word as written in stone.
5. pandora with the "vga fix" (this could still use a lot of work but glad it plays)
6. garmin xt
7. total commander
8. FTouchSL
Click to expand...
Click to collapse
Here you go, first download this build of the M2D interface http://rapidshare.com/files/149919545/Manila2D_1.00_1819.2926-xplode.CAB then just follow the instructions on the link http://forum.xda-developers.com/showthread.php?t=488017 But do not replace Backup file and do not do the reset defaults, and finally only install the rapidshare build, audio manager, album manage, and M2D config otherwise the interface will not loadand use these files and you should have no problems with the HTC M2D interface.
Enjoy!
jlavoie said:
Pharos released a new ROM update yesterday. it is the same 20778 build of wm with a Pharos build date date of 6/25/09. not seeing a lot of changes, the double tap effect with single press is still present and it has been reported the blue tooth and voice dial problem still exist. hopefully now that a rom has been released for download someone will start thinking about cooking for the device. first we need HARD SPL!!!
FYI: A mod for Pharos stated in the Pharos Forum that they are NOT curently working on release of 6.5 for any traveler device. i hope this was some sort of mistake.
Click to expand...
Click to collapse
Just wondering if this ROM update was for the Traveler 137?
Glad to see a thread here on this phone
I have had my Pharos 137 just about 24 hours now. What a *quirky* phone. I'm just starting to customize it a bit. Anyone else seen weird interactions with bluetooth accessories? It seems to have crashed my BT stereo headphones - they won't shut off or interact with anything, am waiting for the battery to die so I can recharge and see. (FWIW they're cheap Best Buy house brand - Insignia)
Pandora will work on this phone. A bit challenging to get it installed, still haven't figured out a graceful way to shut it down. Very cool having 3g speed for Slingplayer Mobile.
superman4545,
yes, the updated rom is for the Pharos Traveler 137.
jlavoie said:
i have attached htc scroll. after install navigate in the registry to HKCU\ControlPanel\Gestures\Touch\Disabled and set Decimal value to 0 and soft reset. now you will have htc kinetic scrolling that will not interfere with other programs such as pointui, mobile shell 3 of TF3D.
Click to expand...
Click to collapse
thanks for the cab jlavoie also thanks to you superman...
One quick question for ya jlavoie...or anyone that might know for that matter
the scrolling works great for everything except when reading a message in outlook I can scroll through inbox and other folders but not on messages themselves any ideas? I haven't found any reference to this in particular.
Using Pharos 137 btw...
thanks again!

Categories

Resources