Develop Bugs

IPL-1.00 upgrade available now from the latest official WM6 Dopod!

ausdim (Senior Member) has extract the new version IPL-1.00 included in the latest WM6 Dopod ROM.
I've just upgrade my IPL-050 to IPL-1.00. No problem. Works fine.

Why would you update the ipl?
I mean what's the benefit ?

Why not?
RacerII said:
Why would you update the ipl?
I mean what's the benefit ?
Click to expand...
Click to collapse
And why not?
Older version was 0.50 and newest is 1.00.
That's all.
After upgrade IPL version 1.00, my Trinity work always fine.
Filicloe.

I said it before and I'll say it again, flashing the ipl is a un-needed risk, do not do it unless you need to or have a update-addiction problem. If anything goes wrong on the ipl flash there is NO WAY to recover... Better safe then sorry.

"NO WAY to recover"
Shadowmite said:
I said it before and I'll say it again, flashing the ipl is a un-needed risk, do not do it unless you need to or have a update-addiction problem. If anything goes wrong on the ipl flash there is NO WAY to recover... Better safe then sorry.
Click to expand...
Click to collapse
I already flash 3 Trinity: mine and two others. No problem. The upgrade IPL procedure is very fast (about 2 secunds).
Thanks again a lot at the senior member ausdim which extract the latest IPL version.
Dopod has release a new IPL version, and I think there is a reason. Why did they upgrade IPL? Only for the fun? It's not serious.
Now, my Trinity get the latest and official IPL, SPL (by Olipro) and Radio ROM.
Filicloe.

Hi,it's already included in the rom FR 3.1 cooking by Faman.

Marcdu81 said:
Hi,it's already included in the rom FR 3.1 cooking by Faman.
Click to expand...
Click to collapse
Yes. But I'm not using the ROM FAMAN 3.1.
See my signature below.
And this upgrade can be useful for those who are already in IPL-0.50 and want to change only the IPL Version (instead of flashing a complete ROM with IPL-SPL-RADIO ROM).
Filicloe.

Ok,I just give this information for 3.1 user's,so they don't need to flash with it if they don't know their IPL version.

what is the difference in versions guys??
why are we updating?

Difference between IPL-0.50 and IPL-1.00?
mhbr12742 said:
what is the difference in versions guys??
why are we updating?
Click to expand...
Click to collapse
That's a very good question!
But NOBODY know which is (are) the difference(s) between the IPL-0.50 and IPL-1.0.
We can only be sure that's the newest version.
Filicloe.

filicloe said:
But NOBODY know which is (are) the difference(s) between the IPL-0.50 and IPL-1.0.
Click to expand...
Click to collapse
which is a good reason not to risk your device for no reason..

Exactly why NO ONE should flash this, maybe this ipl blocks the spl from being modified? Maybe you just implemented some other anti-rom changing code they have yet to turn on... Granted this is a extreme example and most likely not the case, but you have a working device, and are running non OEM roms, it's best to leave the ipl at what was working as it's the most dangerous flash possible on our devices.
More than likely the ipl update fixes a few rare scenarios which might need a reset and/or hard reset to fix the device.

Silly question i know... But what is the IPL for? what does it do?

- IPL :
the IPL (Initial Program Loader) with for role of all copying the contents of ROM SPL in RAM.
- SPL:
Once charged in RAM, the SPL (Secondary Program Loader) commonly called bootloader,charge the Radio ROM and OS in memory and to start the sequence of boot.
For the IPL and the SPL it is very strongly not recommended to update these ROM: for a majority of pda there are several versions of the internal components, and the updates are not compatible between different material because the sequences of starting are different. Moreover once the IPL and SPL upgraded, a return behind is not possible!

Shadowmite said:
Exactly why NO ONE should flash this, maybe this ipl blocks the spl from being modified? Maybe you just implemented some other anti-rom changing code they have yet to turn on... Granted this is a extreme example and most likely not the case, but you have a working device, and are running non OEM roms, it's best to leave the ipl at what was working as it's the most dangerous flash possible on our devices.
More than likely the ipl update fixes a few rare scenarios which might need a reset and/or hard reset to fix the device.
Click to expand...
Click to collapse
Dear Shadowmite
OK. Now I understand.
I will flash tomorrow morning the latest official HTC WM5 ROM (1.23.406.2) which restore the original IPL, SPL, RADIO, etc.
After that, I think my Trinity will not be yet SuperCID. No ?
So, are you agree with this procedure:
1- Remake my Trinity SuperCID with the Pof utility v1,
2- Flash SPL 1.30 Olipro
3- Flash Radio ROM 1.46.30.11
4- Update any WM6 ROM.
Please, tell me if this procedure is the best. (I'm sure that a lot of members of XDA-DEVELOPERS will be interested by your response)
Thanks by advance,
Filicloe.

Urgent Help from Developers about : 1.37.405.1

Developers in this forum
Could someone sign the new Diamond rom 1.37.405.1. I dont want to harm my device and install Dev.edi.of Hard SPL.
I have Signed Hard SPL to be sure Im installing somethink ok form developers or HTC.

bagamyanaleks said:
Developers in this forum
Could someone sign the new Diamond rom 1.37.405.1. I dont want to harm my device and install Dev.edi.of Hard SPL.
I have Signed Hard SPL to be sure Im installing somethink ok form developers or HTC.
Click to expand...
Click to collapse
I have installed dev Hard SPL and 1.37.405.1 and it seems ok. But i understand your concerns.

And I have a question when I install dev.ed.hard spl is it possible to turn Signed Hard SPl again ? or not possible at all.

I have the same request and the same question (posted also into Unsigned HardSPL thread: sorry-> time shift...).
Best. And thank for all tools.

Do not worry, the ROM is factorial and without problems for your devices.

Ok I couldnt stop myself to update and I have install developer ed. and start to update my touch but I just want to know is it possible to downgrade HardSPL 1.4 (dev.ed.) to 1.35 ( Signed ) .

[UPG]HardSPLs 1.23, 1.24 and 1.34

Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped), 1.24 (mfg), 1.34 (shipped) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23, HardSPL-1.24 or HardSPL-1.34 folder.
I have tested these versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl. A mfg spl includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL

perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
closing the stable door after the horse already bolted?

Thanks.
Good to see you here on the diamond forum, jockyw2001
After the great work you did for the kaisers hope it will be the same for the diamond.

Great works again Jocky..
Thanks u so much..
Installed 1.24.Hard version.Working fine in my device

Olipro said:
perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
Click to expand...
Click to collapse
no they're different, and possibly 1.24 is older if u left the version# untouched
closing the stable door after the horse already bolted?
Click to expand...
Click to collapse
no, for sure not

will try later
i have tryed others...and they just sit at 0%
im no n00b.....i do know what i am doing

Hey! JockyW is here!
Yey, JockW is here. I love your works in Kaiser sections. Welcome, friend.

jockyw2001 said:
Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped) and 1.24 (mfg) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23 or HardSPL-1.24 folder.
I have tested both versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl.
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL
Click to expand...
Click to collapse
Hi man, happy to see you here ( i still owe you from radio from hell!!!)
i have a noob question: whats the difference between this hardspl and Olinex version? and do i hjave to change it?( i already have olinex developers edition)

Thanks jocky bro..!
It works just fine

i installed 1.24... it works although i can't see anything special.

@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.

SecureGSM said:
@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.
Click to expand...
Click to collapse
You can flash any signed spl with this sspl. Which signature is used doesn't matter: self-signed, olinex, or htc it doesn't make a difference.

works thank you
this now lets me flash what ever i want
before i was getting stuck at 0%...grrrrrr
thank you for this...you are a star!

Great release Buddy still using your first beta

HardSPL v1.34 added to first post.

jockyw2001 said:
HardSPL v1.34 added to first post.
Click to expand...
Click to collapse
thanks for update.I looking for 1.37 and 1.93 SPL in next times

I am confused which one to install?
What is mfg?
Which is better?
Sorry for all questions at once but i am really confused.
BTW i have olinex 1.40 dev edition.

Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here

jockyw2001 said:
Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Click to expand...
Click to collapse
Thanks for the quick answer. It explained everything that i needed to know.

so many hard-spls, so little time
k sorry this sounds so noobish but i've never seen so many hard-spl's in one forum before ha..
so you're basically saying if people are having trouble flashing with the other hard-spl (do you have any explanation as to why this is?) they should just try each of these and see which one works?
i guess what i'm wondering is why would 1.23hard-spl work better for someone than 1.34? what i'm guessing right now is, 1.24 is MFG so should work better in most instances, but technically the best 'fit' would be a hard-spl based on your shipped spl?

Help with ROM update please.

Hi need some expert help please.
Trying to update my Diamond and first i updated Hard-SPL-Diamond-OliNex 1.40 i think it says.
Then i updated with: RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe
So everythings seems fine and its installing all the programs and so...
BUT the touch screen is not working very good, its like freezing up all the time and some time is just hanging so i haft to boot the device. But when its not possible to use the touch function the "button" is working. Hope u understand what i mean? Somebody know what to do?
Im all new with this kind of stuff pleae help me!
Best regards Micke

y dont u d/l e 1.93 cook rom it more faster... but need to use unsigned SPL
The Signed HardSPL only allowed you to flash ROMs that have been signed by Olipro and listed in his thread in the sticky

OK.. like i sayed im new. So where do i get a cooked ROM and where a Unsign SPL ?
And does anybody know if there is a Swedish ROM out?
Thanks alot!

This one is unsigned SPL (Hard-SPL - Developer Edition)
http://forum.xda-developers.com/showthread.php?t=400950

harky please read before you post... 1.40 is unsigned hard-SPL..
if you're having trouble with device after flashing, try a couple things:
1) hard reset
2) if it still doesn't work, reflash that ROM or another
3) still giving you problems, then i think you should try one of the other Hard-SPLs (look for the one that is from your original SPL version)

he is asking for unsigned one also (i nv see wrong @ his post)

read again.. he already has 1.40 olinex (which is unsigned)

Problem with FLASHING my HTC TOUCH DIAMOND

Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^

i try this rom and its running with no probleme

Inv1ctus said:
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
Click to expand...
Click to collapse
Choose a different HSPL, go for 1.40 or 1.93. I had the same problem.

Could you please tell me exactly what you have done?
Every step and which SPLs you used?
Did you only use the CustomRUU from the download file?
That would be very nice
Otherwise i am about to desperate
sraaj: okay, i am going to try it right now^^

I could write my version, but if you look at sticky number 3, that has everything. I followed it and it worked just fine....
http://forum.xda-developers.com/showthread.php?t=416211
just that 1.30 did not work, so I used 1.40 which is in the post above... also i hope its not CDMA, since the above is for GSM models..

Could anyone give me a link to download HSPl 1.40 or 1.93 please?
I seem to be too stupid to find another one than 1.3
Edit:
Well, i now found a 1.93 and a 1.40 but they seem to be the same as my 1.3
Does anyone have a link with the version i need?
2. Edit:
I found an 1.40 .... finally
so now i try it again

It is updating right now, with HSPL 1.40..oh guys i hope so much that it works in the end

.....And did it work?

So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys

Inv1ctus said:
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Click to expand...
Click to collapse
Congratulations
Yes, that was precisely my problem. with 1.40 everything works.
I upgraded to 1.93 but dont know why, just cuz it looks to be a higher version...
So now you can spread the knowledge, and keep helping our junior members...