Related
THIS SOFTWARE IS OUTDATED!!!
DON'T USE IT, LOOK FOR NEWER VERSIONS!!!
*****
FROM THE TRINITY TO YOUR HERMES
A collection of extracted files from the latest Trinity ROM that can be used in your Hermes. Compatible with WM5 & WM6.
The CAB Files are at the end of this post.
Install the CABs always to the Device (not Storage Card) and perform a Soft Reset after each installation.
1/ COMM MANAGER 1.3.6.0
With "Flight Mode", "Beam" (IR) and "IP Phone" (VoIP) buttons enabled!!!
IMPORTANT NOTE: "IP Phone" button doesn't runs well but we can show the button while waiting for a FIX. The rest of the buttons works like a charm.
The file "CommManagerRes_dll.CAB" is the CAB file used in the Trinity to change the backdrop of the Comm Manager to the HTC Green one. It re-sort some buttons too. It will be installed after the installation of the "XDA CommManager 1.3.6.0.cab" file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2/ SIM MANAGER 5.30
The "Sort by name" function is fixed.
3/ HTC HOME PLUGIN 1.6.0.0
Today Plugin with direct access to:
- Battery CPL.
- Quick Screen Rotation.
- Comm Manager.
- Brightness CPL.
4/ BLUETOOTH EXPLORER 1.1.26907.1
Bluetooth Explorer lets you exchange files using Bluetooth with other Bluetooth-enabled devices.
This is the help about this new tool:
Overview of Bluetooth Explorer
Bluetooth Explorer lets you exchange files using Bluetooth with other Bluetooth-enabled devices.
Note: Bluetooth Explorer works the same way as File Explorer.
To enable Bluetooth Explorer
1. Tap Start > Settings > Connections tab > Bluetooth > FTP tab > Enable Bluetooth Explorer.
2. Tap OK.
To set the Bluetooth shared folder
The Bluetooth shared folder is the folder that other devices will see when they connect to your device using Bluetooth Explorer. Your device must have Bluetooth turned on and set to Visible mode for other devices to see the Bluetooth shared folder.
1. Tap Start > Settings > Connections tab > Bluetooth > FTP tab > Enable File Sharing.
2. Tap Browse to set a folder to share.
3. In Add/Delete Folders, select a folder to share then tap OK. Tap New to create a new folder to share.
4. Tap OK.
Note: \My Documents\Bluetooth Share is the default Bluetooth Explorer shared folder.
Use of Bluetooth Explorer
To launch Bluetooth Explorer
Tap Start > Programs > Bluetooth Explorer. Bluetooth Explorer then scans for visible Bluetooth devices you can connect to. From the list, select the Bluetooth device you want to connect to.
Note: You may need to enter a Passcode in order for you to connect to the device.
To use Bluetooth Explorer
If there are shared files in the Bluetooth shared folder on the other device, you will be able to see those files on the Bluetooth Explorer screen. You can then do the following:
- Copy or delete files.
- Create a new folder.
- Paste a file into the folder.
Click to expand...
Click to collapse
Comment from chenga:
chenga said:
Tested Bluetooth Explorer. Works with Rom 2.11 (WM5 AKU 3.3.1) and my Apple MacBook Pro. I was able to browse the shared directories, send a file, and receive a file.
Note that enabling file sharing automatically makes your device "discoverable" (visible to others). So if you don't want to be discoverable all the time, be sure to uncheck the correct box in the "mode" tab of the bluetooth settings.
Click to expand...
Click to collapse
5/ IN THE NEXT POST...
5/ ADOBE READER LE 2.00.272329
Yes, the Trinity users got Adobe Reader LE while we got the ClearVue ****... Now it's our turn!
IMPORTANT NOTE: Remember to install it in the Device, not in the Storage Card. It takes about 2Mb of storage.
6/ GIF ANIMATION 1.10.1020.611
A GIF player to open GIF files. The open command of the File Explorer for GIF files is assigned to this program.
Looking for more stuff from the Trinity...
Work well and hope to see these programs on next cooked RoM.
Thanks installed and Comm Manager works great, nice to have these functions and in the one place.
Rom:Black 2.0
Radio:1.38.30.00
SPL:Olipro 1.40
Working great in Live 0.2.1.
Thanks!
VivaErBetis said:
FROM THE TRINITY TO YOUR HERMES
A collection of extracted files from the latest Trinity ROM that can be used in your Hermes. Compatible with WM5 & WM6.
The CAB Files are at the end of this post.
Install the CABs always to the Device (not Storage Card) and perform a Soft Reset after each installation.
1/ COMM MANAGER 1.3.6.0
With "Flight Mode" and "Beam" (IR) buttons enabled!!!
2/ SIM MANAGER 5.30
The "Sort by name" function is fixed.
3/ HTC HOME PLUGIN 1.6.0.0
Today Plugin with direct access to:
- Battery CPL.
- Quick Screen Rotation.
- Comm Manager.
- Brightness CPL.
Looking for more stuff from the trinity...
Click to expand...
Click to collapse
Any chance to get the today screen backdrop (tsk) from the HTCplug?
Looks cool.
frigit said:
Any chance to get the today screen backdrop (tsk) from the HTCplug?
Looks cool.
Click to expand...
Click to collapse
You can put anything you want in the HTC pluging using a Registry Editor and looking to the key "[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HTCHomeplug]" but you need to know:
- The executable file for the new function.
- The resource file from where take the icon to show (if there is not icon, the redirection runs but you can't see any image in the plugin).
I've only extracted the files from Trinity (and fixed a little problem with the Power executable name). The rest is up to you and chefs.
Thanks! Been waiting for this!!
UPDATE:
1/ COMM MANAGER 1.3.6.0
With "Flight Mode", "Beam" (IR) and "IP Phone" (VoIP) buttons enabled!!!
CAB in the first post.
VivaErBetis said:
UPDATE:
1/ COMM MANAGER 1.3.6.0
With "Flight Mode", "Beam" (IR) and "IP Phone" (VoIP) buttons enabled!!!
CAB in the first post.
Click to expand...
Click to collapse
Nice to have it in a cab so I don't have to keep hacking the registery myself Question - when I added IP Pone to mine, the button itself actually doesn't seem to work. It also adds a setting for IP phone under the settings listing which doesn't seem to do anything either. Does you cab effect fix either of these or am I missing files/reg entries?
chymmylt said:
Nice to have it in a cab so I don't have to keep hacking the registery myself Question - when I added IP Pone to mine, the button itself actually doesn't seem to work. It also adds a setting for IP phone under the settings listing which doesn't seem to do anything either. Does you cab effect fix either of these or am I missing files/reg entries?
Click to expand...
Click to collapse
The CAB is only the Trinity Comm Manager and the registry keys that are associated to it. Maybe, "IP Phone" doesn't run and that's the reason that it's deactivated by default. But, we can show the button while wait for a FIX...
Try icons
Could someone please indicate how to remove the tray icons from Black 2.0.
It is not so transparent here..
Thank you..
VivaErBetis said:
The rest is up to you and chefs.
Click to expand...
Click to collapse
those files have already been integrated in the windows mobile premium release
dutty said:
those files have already been integrated in the windows mobile premium release
Click to expand...
Click to collapse
Hello Dutty,
I'm glad to see that you've included it in your ROM. Only two things:
- I've included a IP Phone (VoIP) Button to the Comm Manager (it doesn't runs very well but we can show it until a FIX appears).
- Have you fixed the click & events sounds? Look here:
http://forum.xda-developers.com/showthread.php?t=300904
Thanks for your great work!. I'm currently using your koch for testing purposes and I found some fails, but none very important. If you want I can PM you with them.
VivaErBetis said:
Hello Dutty,
I'm glad to see that you've included it in your ROM. Only two things:
Thanks for your great work!. I'm currently using your koch for testing purposes and I found some fails, but none very important. If you want I can PM you with them.
Click to expand...
Click to collapse
well forget about koch v1, koch v2 is a total rewrite
VOIP is enabled by default in this build (today plugin is present and settings in phone)
click sounds are present by default in this build ( i assume you mean the button clicks and touchscreen clicks)
as i said earlier, this *is* premium. most other roms share the same base, this one is different.. everything is in from the ground up..
VivaErBetis said:
The CAB is only the Trinity Comm Manager and the registry keys that are associated to it. Maybe, "IP Phone" doesn't run and that's the reason that it's deactivated by default. But, we can show the button while wait for a FIX...
Click to expand...
Click to collapse
Yeah - I was just hoping I was missing something I think there are a couple buttons missing. Clearly when you click the settings -> IP Phone, it is trying to load a Settings Control Panel which seems to be missing (Maybe take you to the IP Phone setting in the Phone Control Panel?)
Hopefully one of those smart Chef's are using IP Phone and can figure out how to get it to work
dutty said:
those files have already been integrated in the windows mobile premium release
Click to expand...
Click to collapse
Sweet! Any luck with the IP Phone setting Dutty?
chymmylt said:
Sweet! Any luck with the IP Phone setting Dutty?
Click to expand...
Click to collapse
Dutty said that his upcoming Premium ROM is VoIP enabled. So, it's a good place to test if the button runs well or not.
I will install Black 2.0 this night to test it cause it's VoIP enabled too.
chymmylt said:
Sweet! Any luck with the IP Phone setting Dutty?
Click to expand...
Click to collapse
i´m playing around with it at the moment..
i would test it but i don´t know of any SIP provider i could use..
dutty said:
i´m playing around with it at the moment..
i would test it but i don´t know of any SIP provider i could use..
Click to expand...
Click to collapse
There's a bunch of them you can use for free I'm using Poivy right now The only annoying thing is you have to download their Windows XP/Vista client and install it to setup an account. After that's done, do what I do and uninstall the software
Free to setup an account and use them (and if you used anything that cost money (calling Cellphones or countries that arent free), they seem to have about the best rates - damned I sound like an advertisement).
http://www.poivy.com/
If you need help setting up the setup cab I'd be happy to help (though I think you'll get it no problem)
K's WM6.0 FINAL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PCM Keyboard Skins (Optional)
Preface
K's WM6.0 Final
K's WM6.0Lite Final
[NEW FEATURE] Automatic cab installation – Storage Card Required
[NEW FEATURE] Quick Access to advance settings from PHM Registry
BigStorage SuperCID + Splash + Extended Rom
No SPL, No Radio, No Startup Animation, No Startup Sound
Built on WM6 5.2.1933 build 18533.0.7.0
.Net Compact Framework 3.5
Video Call, Smart Dialing available
Quick Setup on hard reset [Skips Windows Welcome]
No Java Included
FULL Rom Only
[EXT ROM] – Apps cooked into Extended Rom and can be deleted manually
[CAB] – Apps installed as cab from Extended Rom and can be uninstalled
Accessories:
BT Explorer 1.2.30736.1 [FTP via BT]
Flashlight [Turns on Camera Flash Light] [EXT ROM]
VoiceRecorder 1.10.712711.2 [EXT ROM]
WM5torage 1.80 [Enables MicroSD to work as mass storage] [EXT ROM]
PIMBackup 2.7 [EXT ROM]
SuperBright [EXT ROM]
System Tools:
Sim Manager
Comm Manager
Internet Sharing
Advanced Config 2.0 [EXT ROM]
PHM Soft-Reset [NEW ICON] [EXT ROM]
PHM Registry 0.70 [EXT ROM]
WMWifiRouter 0.91 [EXT ROM]
Other Apps:
ArcSoft MMS 4.2.8.1
Adobe Flash Lite 2_1 [NEW ICON]
Adobe Reader LE [EXT ROM] [NEW ICON]
Office Mobile 6.1 + OneNote
Camera 4_0_28276_00
SIM Manager 6.33
SIM Tool Kit 4.40
SMS Service
Spb Calculator
Windows Media Player
HTC SymbolPad
HTC Network Folder Plugin [EXT ROM]
HTC Audio Manager 1.2.1017717
HTC Album 1.0.1030.720
HTC Enlarge Start Menu
HTCHome 2.1.1005.722
HTC Random Access_4_0_8310720_0
HTC Task Manager/"X" button [CAB]
HTC Streaming Media 3.0.17201121.00 [EXT ROM] [NEW ICON]
Pocket RAR 3.71 [EXT ROM]
StartClean [EXT ROM]
Task Switch [Button 5/PTT Button] [EXT ROM]
HSDPA Switch [Toggles HSDPA mode in connection settings] [EXT ROM]
Tweaks:
802.11g support [Fixes some router compatibility issues]
AT&T 8525 Keyboard Layout [Changeable]
Auto Time Zone Synchronization
Shows clock on title bar in all windows
SDHC support
Changed Default live search to Google
Disabled Auto Keyboard back light sensor [Re-enable in settings]
Disabled all Today Items Except for HTC Home
Disabled Startup Animation [Fixes low volume issue]
Disabled WM6 Sound
Disabled SMS Delivery Option [Re-enable in registry] [Fixes multiple sent SMS issue with certain operator]
Disabled System Events Sound [Re-enable in settings] [Speeds up Start Menu]
Disabled HSDPA [Re-enable in settings]
Disabled IR beam [Re-enable in CommManager]
Disabled Error-reporting
Disabled In-call feedback sound [Beeping when changing volume, call drop, and etc]
Enabled EDGE/HSDPA Icon
Enabled DTMF Support
Enabled GPRS/3G disconnect and timer
Enabled Clear-type in both portrait and landscape mode
Enabled Custom Button 5 Mapping [Button 5 - task switch, Button 5 (Push and Hold) - Hotvoice]
Enabled Power Management
Enabled Single line date plugin [Shows clock, day, and date on one line]
Enabled 160 char Text MSG [Default is 60]
Enhanced BT A2DP Quality [bitpool 58, sample rate 48000, joint stereo = 1]
Fixed SD card power drain issue
Fixed Corrupted SD card issue
Fixed ATI ImageON issue
Fixed Slow PIE scrolling issue
Hidden Sim Contacts
Removed Tray bar, OEM Calculator, VoIP, Transcriber, PhonePad, Customer Feedback, PTT, ModemLink, Enterprise, WM6 themes, and a bunch of useless craps
Using the Auto Installation Feature [optional]
Step 1: Preparing the cabs
---------------------------
- To use the auto installation features, the cabs must be set to "Read Only", must not have any "setup dll", and must have a "hard coded installation path" which means you should not be allowed an option to choose where to install the cabs.
- To set the cabs to a static path, install WinCECab Manager.
- Open a cab with WinCE Cab Manager and click on "CAB Information".
- Double click on "Default Install Dir" then select "Installation Directory" tab and choose "Do not allow user to select installation directory"
- Save the cab then right click on the cab and select "Read Only" and click apply/OK.
- Check if there "Setup dll" is present under Cab Information. If setup dll is present, delete it off.
- Check and prepare all the cabs you want to auto install and place them into the Cabs Folder.
Step 2: Editing the Config.txt file
-----------------------------------
- You will now need to add the file names into the config.txt file.
- Open up Config.txt in "Cabs" folder with Notepad.
- You should see the following content:
Code:
LOCK:Enabled
CAB: \Storage Card\Cabs\Call_Firewall.cab
CAB: \Storage Card\Cabs\TCPMP.cab
CAB: \Storage Card\Cabs\FlashVideoBundle.CAB
CAB: \Storage Card\Cabs\Threaded_SMS.cab
LOCK: Disabled
RST: Reset
- Ignore the Fist line "LOCK" and the last two lines "LOCK", "RST"
- From here on, it should be pretty straight forward. For every cab you want to install, you will need the line:
Code:
CAB: \Storage Card\Cabs\*CAB FILE NAME*
- Simply Add the name of the cabs you prepared earlier into this file and click "save".
- Right click on the config.txt file and select Read Only.
Step 3: HARD RESET!
---------------------
- Finally, HARD RESET the phone by holding down the two soft keys simultaneously, and push the reset button with the stylus
- Auto installation will begin after the Rom completes its configuration
THAT's ALL!! Not too hard is it?
Click to expand...
Click to collapse
Installing Cabs to Storage Card with the Auto Installation Feature
Step 1: Changing the cab's path
---------------------------------
- Open up the cab you want to install to storage card with WinCE Cab Manager.
- Select Installation Directory and change the path to "Storage Card\"
- All Other Rules from above apply
Click to expand...
Click to collapse
Accessing Advanced Settings from PHM Registry
STEP 1: Launch PHM Registry
------------------------------
- Launch PHM Registry
- Click on the "Favorites icon" indicated in the picture.
STEP 2: Change the settings
-----------------------------
- You will be presented a list of registry settings short cut. Click on anyone of them will bring you to the registry settings where you need to change.
- Registry Settings Guide
Click to expand...
Click to collapse
Known Issues
- Dialer status icons are misplaced
- Action Screen does not work in landscape mode
Click to expand...
Click to collapse
FAQ
Q: What is the difference between this Rom and the Flexi Rom?
A: The Flexi Rom has better customize-ability in the sense that almost every app installed in the rom can be uninstalled from windows. However, there is a speed penalty for the extra flexibility. OTOH, this version of the Rom is the original K's Rom, with enhanced speed and stability. However, most of the apps are cooked-in and cannot be uninstalled from windows like the Flexi Rom.
Q: Hardware keyboard symbols are incorrectly mapped....
A: Default Layout is AT&T 8525's layout. You can change the layout with PHM Registry. Select the Keyboard layout shortcut and change the settings to:
The following values are in "HEXADECIMAL"
Code:
Spanish Hermes
"Layout"="2040a"
Japanese/Softbank
"Layout"="30411"
German Hermes
"Layout"="20407"
8525/Chinese (default)
"Layout"="20404"
TyTn/English (British)
"Layout"="20409"
Q: How quickly does the phone ring?
A: Awake state: by the end of 1st ring; Sleep state: At the begining of 2nd ring
Q: I can't save pocket outlook attachments to storage card.
A: Make sure Extended Rom is hidden.
Q: How do I close apps? clicking on "X" only minimizes the apps (LITE ONLY)
A: Press and hold "X" until app closes in Full version. For Lite version, install a task manager. (Recommendation: HTC Task Manager + Task switch combo (included in Full) | WkTask)
Q: How do I get WM5torage to work? I activated the app but nothing happens
A: After activating WM5torage, click on menu -> troubleshooting -> disable both options.
Q: The Rom doesn't look anything like the picture.
A: Chances are you downloaded the Lite Version. Full version is shown in the picture.
Q: After installing HTC Action Screen in the LITE rom, the soft keys still show Contacts/Calendar
A: Change the following registry settings with PHM Registry:
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112]
@="Actions"
"Open"="\Windows\HTCActionScreen.exe"
(113 = Right soft key, 112= Left soft key)
Q: I am using a different theme in this rom, how can I change Random Access bar color?
A: Copy RS_Bar.png & RS_Ind.png from Windows dir, change the color, and toss them back into Windows
Q: How can I enable startup animation and sound? (NOT Recommended)
A: It is not recommended to enable startup animation and sound as it cripples the phone volume.
Add the following registry keys
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\StartupAnimation]
"Volumn"=dword:20
"WAVFile"="\SOURCE DIRECTORY\Startup_sounds.wav"
"GIFFile"="\SOURCE DIRECTORY\HTC.gif"
"Enabled"=dword:1
Source directory = Wherever your files are i.e. Windows, Extended_ROM, an etc
Q: After changing to other themes and going back to K's theme, the theme is no longer black but gray
A: Using PHM Registry, select favorites -> BaseHue, then put in the following value:
Code:
[FONT=Verdana][HKEY_LOCAL_MACHINE\Software\Microsoft\Color]
Basehue=160
[/FONT]
Q: How to View/Store Pictures in Storage Card
A: By default, HTC album searches pictures in My Pictures and DCIM folder.
Code:
- Create "My Documents" folder in storage card
- Create "My Pictures" and "My Videos" folders in My Documents
- In the camera, select storage card for default storage location
Pictures taken will be saved in storage card.
Q: How do I get HTC Album to show all pictures
A: Rename My Pictures Folder to something else and HTC Album will show all pictures.
Q: I cannot get HTC Album to save in Storage Card
A: Make sure Network Folder Plugin is disabled (settings -> connections)
Q: There's no Events sound...and some Apps notification sound is disabled...
A: Events Sound disabled, re enable in settings -> Sound & Notifications -> Events
Q: WMP freezes when updating library!
A: If you are addings songs from storage card, select "show all files" and delete METADATA folder. Library should update without any problems now.
Q: The Rom drains battery quickly!
A: Let the battery fully drain out, then do a full recharge.
Q: The Final version is released....you're done?
A: Still far from "done". Will be working on WM6.1 and a completely different theme for future Roms.
Click to expand...
Click to collapse
DISCLAIMER
By downloading and flashing this rom, you agree that you will take full responsible in whatever that may happen to your phone. Please make sure you have HardSPL v7 before you flash the rom!
Click to expand...
Click to collapse
Download Links:
Please make sure you have read - Change Log, FAQ, and known issues before downloading and flashing the Rom.
Click to expand...
Click to collapse
What's New?
- Updated HTC Random Access
- Updated HTC Streaming Media
- Updated HTC Audio Manager
- Updated HTC Album
- Updated Network Folder Plugin
- Updated Connection Setup
- Updated WMWifiRouter
- Updated K's Theme [Improved visibility]
- Added Advanced Config V2.0
- Added Enlarge Start Menu
- Camera Button launches Camera immediately instead of HTC Album
- HTC Album launches in landscape mode by default [to avoid slideshow menu bug. Can be Patched to launch in portrait mode, check path file in "Other Files"]
- Enabled PIE 5 way Nav
- Enabled Syncing Animation
- Fixed Keyboard Driver - Hotvoice works on Button 5 Push and Hold, and Keyboard no longer locked to numbers during call!
- Fixed Various Drivers including BT Issues
- Fixed and Updated PHM Registry Favorites
- Optimized Some EXEs
- Reverted WMP to start in Library
- Removed PTT Fix [No Longer Needed]
Click to expand...
Click to collapse
K's WM6.0 FINAL
Free Storage: 58mb +/-
Free Ram: 26mb +/-
[Rom + Auto installation Starter Pack + PagePool Changer + WinCECabManager Trial]
(System events sound disabled, you will NOT hear a "ding" sound from your phone on windows welcome screen after flashing! keep an eye on your screen after flashing)
Link 1 - 4mbpp - RapidShare
Link 2 - 4mbpp - MegaUpload
Link 3 - 4mbpp - SendSpace
Link 4 - 4mbpp - Zshare
Click to expand...
Click to collapse
K's WM6.0 Lite FINAL
Free Storage: 67.5mb +/-
Free Ram: 30mb +/-
[Rom + Auto installation Starter Pack + PagePool Changer + WinCECabManager Trial]
(System events sound disabled, you will NOT hear a "ding" sound from your phone on windows welcome screen after flashing! keep an eye on your screen after flashing)
Link 1 - 4mbpp - RapidShare
Link 2 - 4mbpp - MegaUpload
Link 3 - 4mbpp - SendSpace
Link 4 - 4mbpp - Zshare
Roaming Icon Patch
(If you are using AT&T and is getting the roaming icon problem, install this patch)
Click to expand...
Click to collapse
*Note that 6mbpp is HIGHLY Recommended. You can change the Page pool before flashing.
*If you enjoy the Rom, please consider donating as a token of appreciation to my hard work. If you've donated, Thank You.
Click to expand...
Click to collapse
Other Files
Cube Add-on
K's SCLPF 1-62 (Recommended)
Kona's Ftouchflo + touch config + Cube package
Original Thread
(Read the original thread's FAQ for solution on missing contacts button in HTC Home)
PCM Keyboard
Keyboard
Touch Skins and layouts collection
SIP Changer [Change PCM Keyboard to Default Keyboard]
Original Thread
YouTube Package - TCPMP + Flash Video Bundle [Included in cabs folder] - Everything you need to start watching youtube and some other FLV sites. Simply browse to the FULL FLV website (NOT mobile version of those web sites) and watch all the videos you want. Clips can also be downloaded to the phone!
***NOTE: Most FLV websites are fully supported, some are not. Do not expect every single FLV site to work.
Other Hardkey Mapper - If you plan to use other hardkey mapper i.e. spb/AE button plus, you may need to remove PTT Fix and do a soft reset before the other app could work.
HTC Equalizer 1.0.2 - Requires headphone to be plugged in before it can work. There is a bug with headphone equalizer whereby the bottom taskbar may disappear, leaving only the keyboard icon intact. It does not affect the functions, but it is annoying. This bug is found on all headphone equalizer I know out there. Hence....it will not be cooked into the rom but available as a stand alone.
illumsoft Screen Capture v1.1 - This is what I used to take the screenshot, the app icon is seen in one of the pictures but it is not cooked in. When the app is running, Button1 (sms hard key) is mapped to take screenshot. You can also set timer and etc. FREEWARE!
Hermes Registry Settings (click me) - Hermes Registry wiki. Re-enable some of the settings I disabled if you want
Jeyo SMS Backup 1.1 - Small app that back up SMS. This is what previously installed in v1.2 but removed in 1.21.
HTC Album Landscape/Portrait Patch - There are 2 cabs in the zip file. You can patch HTC Album to launch in either mode. However, default is landscape mode as slideshow menu gets truncated in portrait mode.
Click to expand...
Click to collapse
Related Thread(s)
K's Flexi Rom
Click to expand...
Click to collapse
Posting links soon?
yup, in a bit. First, let me fill in all the info
I'm going to take this one for a spin tonight, looks about how I like them. Not as lean as I like them, but alot of tweaking I don't have to do.
iKse said:
I'm going to take this one for a spin tonight, looks about how I like them. Not as lean as I like them, but alot of tweaking I don't have to do.
Click to expand...
Click to collapse
Ditto. Only thing I'll miss having is the classic dialer on VP3G's rom. Anyone know what its called? Where the call history is shown right when you go into the dialer?
downloading ...................... thx bro...
flashing it now... pictures looking great
...and it is really fast!
Great rom...!
A French version is planned?
Seems nice.
I'll try that one anytime soon
Thanks
So far so good. Nice and quick. And I got the dialer I wanted, just had to remove the video dialer. Thanks for sharing.
framework
seems cool.
have you cooked in the latest .net framework 3.5 or is it still 2.0?
if you would release optionally a cleaner rom (without BT Explorer, Flashlight, VoiceRecorder, WM5torage, SmsBackup, SuperBright, PHM Registry, Internet Sharing, Soft-Reset Shortcut, ArcSoft MMS, AdobePDF, Adobe Reader, FlashLitePlayer, Pocket RAR, StreamingMedia, ...) and provide cabs for those tools then it would be perfect!
The rom is built on NetCF 2.0. I have updated the page with microsoft NetCF 3.5 beta 1 link if you wish to download NetCF 3.5. I will cook it in on the next release.
I didn't plan on releasing a lite rom since there were already so many lite roms out there, but removing those apps is easy so I will likely release a lite rom along with an update shortly.
Schen's 3G kaiser dialer is the only dialer that is 100% bug free from all the kaiser dialer that I've tested. If you use the 2G kaiser dialer, or any dialer directly ported from the elf, there is an issue with missing texts when you enter letters and numbers at the same time into the dialer. Again, I didn't want to use anything that is buggy, this rom has been personally tested thoroughly by me to ensure there is virtually no bugs that'd affect daily usage. Also, I wanted to cook in the video dialer because that'd make life easier for the folks with hermes that support video dialing. For us folks in the NA, it really doesn't matter if the dialer is 3G or 2G just dont use the video button
Also, I strongly recommend people to change the pagepool to 6mb prior to flashing the rom, it is very easy to do so with the pagepool changer.
Please report any bugs you may have found
intriguing, may I ask, what did you use as the base ROM? I've been trying too cook a Kaiser style ROM (with the dialer, com manager, etc. you feature) based on Schaps 4.20 with little succuess, and this ROM seems pretty close (I'm flashing as soon as I can to test it out). Thank you for your work!
i played with it for a bit last night, and this rom seems to actually be gaining me about 5-10 FPS in Pocket GNUBoy (GBC emulator) coming from shamanix's grass 1.3.
seems pretty snappy in other things, but ill keep using it for a couple days.
cant download from the links posted, can u post it on rapidshare? my country cant download from megaupload...
many thanks in advance
None of the links are working. Looks like a nice rom.
donatello said:
flashing it now... pictures looking great
...and it is really fast!
Click to expand...
Click to collapse
Hi there!
Sorry for te NooB question , how do I use the downloaded ruu.rar file? DO I replace this or what installer do I use to flas my TyTn?
aarrrggghhhh..... cant wait to get my hands on this rom .... any other download links guys?
Preface
K's Flexi Rom - BigStorage SuperCID + Splash + Extended Rom
[NEW FEATURE] Automatic cab installation – Storage Card Required
[NEW FEATURE] More Flexibility – Most apps can now be uninstalled from Windows/removed from Extended Rom
[NEW FEATURE] Quick Access to advance settings from PHM Registry
No SPL, No Radio, No Startup Animation, No Startup Sound
Built on WM6 5.2.1933 build 18533.0.7.0
.Net Compact Framework 3.5
Video Call, Smart Dialing available
Quick Setup on hard reset [Skips Windows Welcome]
No Java Included
[EXT ROM] – Apps cooked into Extended Rom and can be deleted manually
[CAB] – Apps installed as cab from Extended Rom and can be uninstalled
Accessories:
BT Explorer 1.2.30736.1 [FTP via BT]
Flashlight [Turns on Camera Flash Light] [EXT ROM]
VoiceRecorder 1.10.712711.2 [EXT ROM]
WM5torage 1.80 [Enables MicroSD to work as mass storage] [EXT ROM]
PIMBackup 2.7 [EXT ROM]
SuperBright [EXT ROM]
System Tools:
Sim Manager
Comm Manager
Internet Sharing
PHM Soft-Reset [NEW ICON] [EXT ROM]
PHM Registry 0.70 [EXT ROM]
WMWifiRouter [Internet Sharing over Wifi] [EXT ROM]
Other Apps:
ArcSoft MMS 4.2.8.1
Office Mobile 6.1 [OneNote, PP, Words, Excel, Zip, and Faxview]
Camera 4_0_28276_00
SIM Manager 6.33
SIM Tool Kit 4.40
SMS Service
Windows Media Player
AudioManager 1.2.919.713 [CAB]
HTCAlbum 1.0.906.717.0 [CAB]
Spb Calculator [CAB]
Adobe Flash Lite 2_1 [CAB] [NEW ICON]
HTCHome 2.1.1005.722 [Home Dir] [CAB]
HTC Random Access [CAB]
HTC Task Manager/"X" button [CAB]
Adobe Reader LE [EXT ROM] [NEW ICON]
HTC Network Folder Plugin [EXT ROM]
Pocket RAR 3.71 [EXT ROM]
StartClean [EXT ROM]
StreamingMedia 2.20.807.715.00 [EXT ROM] [NEW ICON]
Task Switch [Button 5/PTT Button] [EXT ROM]
HSDPA Switch [Toggles HSDPA mode in connection settings] [EXT ROM]
Tweaks:
802.11g support [Fixes some router compatibility issues]
AT&T 8525 Keyboard Layout
Auto Time Zone Synchronization
Shows clock on title bar in all windows
SDHC support
Changed Default live search to Google
Disabled Auto Keyboard back light sensor [Re-enable in settings]
Disabled all Today Items Except for HTC Home
Disabled Startup animation [Fixes low volume issue]
Disabled WM6 Sound
Disabled SMS Delivery Option [Re-enable in registry] [Fixes multiple sent SMS issue with certain operator]
Disabled System Events Sound [Re-enable in settings]
Disabled HSDPA [Re-enable in settings -> connections tab]
Disabled IR beam [Re-enable in CommManager]
Disabled Error-reporting
Disabled In-call feedback sound [Beeping when changing volume, call drop, and etc]
Enabled EDGE/HSDPA Icon
Enabled DTMF Support
Enabled GPRS/3G disconnect and timer
Enabled Clear-type in both portrait and landscape mode
Enabled Custom Button 5 Mapping [Button 5 - task switch, Button 5 (Push and Hold) - File Explorer]
Enabled Power Management
Enabled Single line date plugin [Shows clock, day, and date in one line]
Enabled 160 char Text MSG [Default is 60 char]
Enhanced BT A2DP quality [bit pool 30, sample rate 48000, joint stereo = 1]
Fixed SD card power drain issue
Fixed Corrupted SD card issue
Fixed ATI ImageON issue
Fixed Slow PIE scrolling issue
Hidden Sim Contacts
Removed Tray bar, OEM Calculator, VoIP, Transcriber, HTC PhonePad HTC SymbolPad, Customer Feedback, PTT, ModemLink, Enterprise, WM6 themes, and a bunch of useless craps
WMP starts in main window [instead of library]
PTT Fix [CAB] [Uninstall to re-enable PTT] [PTT cab required]
K's Flexi Rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PCM Keyboard Skins (download from achieved thread)
Using the Auto Installation Feature
Step 1: Preparing the cabs
---------------------------
- To use the auto installation features, the cabs must be set to "Read Only", must not have any "setup dll", and must have a "hard coded installation path" which means you should not be allowed an option to choose where to install the cabs.
- To set the cabs to a static path, install WinCECab Manager.
- Open a cab with WinCE Cab Manager and click on "CAB Information".
- Double click on "Default Install Dir" then select "Installation Directory" tab and choose "Do not allow user to select installation directory"
- Save the cab then right click on the can and select "Read Only" and click apply/OK.
- Check if there "Setup dll" is present under Cab Information. If setup dll is present, delete it off.
- Check and prepare all the cabs you want to auto install and place them into the Cabs Folder.
Step 2: Editing the Config.txt file
-----------------------------------
- You will now need to add the file names into the config.txt file.
- Open up Config.txt in "Cabs" folder with Notepad.
- You should see the following content:
Code:
LOCK:Enabled
CAB: \Storage Card\Cabs\Call_Firewall.cab
CAB: \Storage Card\Cabs\TCPMP.cab
CAB: \Storage Card\Cabs\FlashVideoBundle.CAB
CAB: \Storage Card\Cabs\Threaded_SMS.cab
LOCK: Disabled
RST: Reset
- Ignore the Fist line "LOCK" and the last two lines "LOCK", "RST"
- From here on, it should be pretty straight forward. For every cab you want to install, you will need the line:
Code:
CAB: \Storage Card\Cabs\*CAB FILE NAME*
- Simply Add the name of the cabs you prepared earlier into this file and click "save".
- Right click on the config.txt file and select Read Only.
Step 3: HARD RESET!
---------------------
- Finally, HARD RESET the phone by holding down the two soft keys simultaneously, and push the reset button with the stylus
- Auto installation will begin after the Rom completes its configuration
THAT's ALL!! Not too hard is it?
Click to expand...
Click to collapse
Accessing Advanced Settings from PHM Registry
In 1.31 you will be able to quickly access some advanced registry settings without using other customization tools.
STEP 1: Launch PHM Registry
------------------------------
- Launch PHM Registry
- Click on the "Favorites icon" indicated in the picture.
STEP 2: Change the settings
-----------------------------
- You will be presented a list of registry settings short cut. Click on anyone of them will bring you to the registry settings where you need to change.
- Registry Settings Guide
Click to expand...
Click to collapse
Change Log [What's New?]
Flexi Rom
- Fixed all bugs in 1.30a Full
- Removed Connection Setup
- Changed Icons - Adobe Reader LE, Adobe Flash Lite, HTC Album, TCPMP, 3G, and battery
- Edited ActionScreen mui strings [Now shows "Select a task below"]
- Added Network Folder Plugin
- Added Auto Cab Installation Feature
- Added Advanced Setttings shortcut feature to PHM Registry
- Various Apps now install from extended Rom
- Optimized various exes and dll files
Click to expand...
Click to collapse
Known Issues
- Dialer status icons are misplaced [Waiting for bug fixes in Touch Dual Dialer]
-Action Screen does not work in landscape mode [ActionScreen's Limitation]
Click to expand...
Click to collapse
FAQ
Q: Hardware keyboard symbols are incorrectly mapped....
A: Default Layout is AT&T 8525's layout. You can change the layout with PHM Registry. Select the Keyboard layout shortcut and change the settings to:
Q: I cannot map HOTVOICE to button 5
A: This is a known issue with the current keyboard driver, you can map hotvoice to any other buttons but button 5.
Q: My GPRS/MMS is not working
A: Install Connection Setup cab. Go into settings -> connection tab -> connection setup, and setup your operator.
Q: After playing with Advanced Config/SK tools with this rom, the beam button in Comm Manager disappeared!
A: Add the missing button back from Advanced config. Button 10 = "Beam" or don't use those tools.
Q: I can't save pocket outlook attachments to storage card.
A: Make sure Extended Rom is hidden.
Q: How do I close apps? clicking on "X" only minimizes the apps (LITE ONLY)
A: Press and hold "X" until app closes in Full version. For Lite version, install a task manager. (Recommendation: HTC Task Manager + Task switch combo (included in Full) | WkTask)
Q: How do I get WM5torage to work? I activated the app but nothing happens
A: After activating WM5torage, click on menu -> troubleshooting -> disable both options.
Q: The Rom doesn't look anything like the picture.
A: Chances are you downloaded the Lite Version. Full version is shown in the picture.
Q: After installing HTC Action Screen in the LITE rom, the soft keys still show Contacts/Calendar
A: Change the following registry settings with PHM Registry:
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112]
@="Actions"
"Open"="\Windows\HTCActionScreen.exe"
(113 = Right soft key, 112= Left soft key)
Q: How do I disable Random Access? (Those letters on the right of Contacts)
A: Change the following registry settings with PHM Registry:
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113]
"Open"="\Windows\Contacts"
or Simply uninstall it if you are using the full version. Make sure "end" contacts in memory management before uninstalling.
Q: I am using a different theme in this rom, how can I change Random Access bar color?
A: Copy RS_Bar.png & RS_Ind.png from Windows dir, change the color, and toss them back into Windows
Q: How can I enable startup animation and sound? (NOT Recommended)
A: It is not recommended to enable startup animation and sound as it cripples the phone volume.
Add the following registry keys
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\StartupAnimation]
"Volumn"=dword:20
"WAVFile"="\SOURCE DIRECTORY\Startup_sounds.wav"
"GIFFile"="\SOURCE DIRECTORY\HTC.gif"
"Enabled"=dword:1
Source directory = Wherever your files are i.e. Windows, Extended_ROM, an etc
Q: After changing to other themes and going back to K's theme, the theme is no longer black but gray
A: Download the file (BlackGlossyBars.cab) from the archived thread and install it. You will need to do this every time after you changed to other theme. Alternatively, you can change the basehue registry value to 160 using PHM Registry.
Q: How to View/Store Pictures in Storage Card
A: By default, HTC album searches pictures in My Pictures and DCIM folder.
Code:
- Create "My Documents" folder in storage card
- Create "My Pictures" and "My Videos" folders in My Documents
- In the camera, select storage card for default storage location
Pictures taken will be saved in storage card.
Q: How do I get HTC Album to show all pictures
A: Rename My Pictures Folder to something else and HTC Album will show all pictures.
Q: Will you cook in the HTC Album with folder selection option?
A: No. It prompts you to select the folder every time which is a nuisance, and it is buggy.
Q: The rom drains battery quickly!
A: Let the battery fully drain out, then do a full recharge.
Click to expand...
Click to collapse
DISCLAIMER
By downloading and flashing this rom, you agree that you will take full responsible in whatever that may happen to your phone. Please make sure you have HardSPL v7 before you flash the rom!
Click to expand...
Click to collapse
I have spent a lot of time and effort in creating this Rom. If you are satisfy with the Rom and would love to show your appreciation towards my work and support, feel free to hit the donate button. It really
makes my day!
Click to expand...
Click to collapse
Download Link:
Please make sure you have read - NEWS, Change Log, FAQ, and known issues before downloading and flashing the rom.
***ATTENTION***
If you are happy with v1.30a, and do not need the flexibility of the Flexi Rom, I strongly recommend that you wait for an actual update of v1.30a which will be released shortly.
K's Flexi Rom (aka v1.31)
Complete Rom Package
Link 1 - 4mbpp (RapidShare)
Free Storage: 57.99mb
Free Ram: 30.63mb
Link 1 - 6mbpp (RapidShare)
Free Storage: 57.97mb
Free Ram: 28.77mb
*If this is your first time flashing, the above files are what you'd need*
(System events sound disabled, you will NOT hear a "ding" sound from your phone on windows welcome screen after flashing! keep an eye on your screen after flashing)
*Mirror to Megaupload/Zshare/sendspace needed*
Extended Rom Only
Link 1 (RapidShare) *If your Extended Rom is corrupted i.e. does not show any files, cannot delete files, cannot add files, then flash this Extended Rom to restore it.
OS Rom Only
Link 1 - 4mbpp (RapidShare)
Click to expand...
Click to collapse
Cube Add-on
K's SCLPF 1-62b
Kona's Ftouchflo + touch config + Cube package
Original Thread
(Read the original thread's FAQ for solution on missing contacts button in HTC Home)
PCM Keyboard
Keyboard
Touch Skins and layouts collection
SIP Changer [Change PCM Keyboard to Default Keyboard]
Original Thread
YouTube Package - TCPMP + Flash Video Bundle [Included in cabs folder]
Everything you need to start watching youtube and some other FLV sites. Simply browse to the FULL FLV website (NOT mobile version of those web sites) and watch all the videos you want. Clips can also be downloaded to the phone!
***NOTE: Most FLV websites are fully supported, some are not. Do not expect every single FLV site to work.
PTT
To restore PTT, first remove PTT fix and reset. Then install PTT and reset.
Click to expand...
Click to collapse
Related Thread(s)
K's Rom v1.30a Full & Lite + Tons of cabs
Click to expand...
Click to collapse
t6rewterwtewr reserved for future use
Thank You!!!! Kin0kin have a lot a work!!! I will flash soon as link will be ready!
Donation is on the way....
diezoo said:
Thank You!!!! Kin0kin have a lot a work!!! I will flash soon as link will be ready!
Donation is on the way....
Click to expand...
Click to collapse
Yo tambien! Me, too! Thanks, K.
Ben
Come back in a few hours and it should be up. I need to tidy up the thread first.
Thread looks awesome now, I cannot wait for it...
Great work Kin0kin!!! I know, I know, these "thank you" posts sucks, but only today
Just announced on Czech community forum, advertising must be for this glorious ROM.
Finally, I have to stay awake all night long again for this beast
Great Job, bro ! I think this is the right time to donate
*waiting mode ON*
Complete Rom is up now enjoy
PagePool
@Kin0Kin
Do you recommend to use the pagepool changer tool to adjust it 6 megs instead of 4 ? Or the 4 megs is enough ?
Thanks
Thanks Kin0Kin for your great ROM!
I have uploaded the 6mbpp version. You can flash whichever you want. Also, if you do not plan on using the auto install feature, take out your storage card and the Rom will complete and reset after installing everything from extended rom.
kin0kin said:
Also, if you do not plan on using the auto install feature, take out your storage card and the Rom will complete and reset after installing everything from extended rom.
Click to expand...
Click to collapse
Is the path 'Storage Card\Cabs\' hardcoded? How does the OS find the config.txt file?
Nice job K. Seems to be hanging in the install of TCPMP, I hard reset and tried again, same thing. I will install the cab manually after a reset.
Edit: Looks like the path is not hard coded hence the hang. Easy fix. Great fast ROM.
R0N1N said:
Nice job K. Seems to be hanging in the install of TCPMP, I hard reset and tried again, same thing. I will install the cab manually after a reset.
Click to expand...
Click to collapse
My install looked like it hung on TCPMP too, but after much patience, it did finish.
However, I think I mucked up the auto CAB install by not putting the config.txt file in the right spot. Must figure out...
Other thoughts -- I had to download the Connection Setup cab from the 1.30a thread as it's not part of this package? Once I ran that, data connection is config'd correctly (for AT&T/US).
Well Done & Thanks
Kin0kin,
Well done. Just about to install. Hope you took my advice and went out for a beer!
I really do like your work. I thought Schaps was cutting edge but you certainly create some very effective roms. My donation will be with you shortly.
Great job and thanks. Now for god's sake go out; its new year!
WB
BTW, is there any other tool for preparing cabs for auto install other than WinCE cab manager?
Some cabs take longer than the others to install, they will look like they are frozen but they will move after awhile (i.e. htc home). Also, the included TCPMP has a much nicer icon hope you guys like it. I should also change WMP's icon one day.
I'm not sure what else can you use to change the folder path, but if you have trouble changing some of the cabs, you can upload the files here and I'd have them changed. Also, do note that cabs that prompts an option after installation i.e. illumsoft screen capture will not auto install.
Yeah I'm taking a break now
EDIT: keitht, can you post up the fixed tcpmp? my copy works fine, maybe I used another copy from another folder (my pc is like a jungle here!)
Yeah, the TCPMP.CAB is hanging near end of install. As stated, it needs to be unmarked as Read only, tweaked with the WinCE Cab Manager and modified to not allow user to select installation directory, save, then mark as read only again and move to the storage card\cabs to replace original.
EDIT: Kin0kin: I waited about 3 minutes and it was still hung. After making the change above, it flew through the install without the hang. I recommend making this change and repackage the download.
EDIT 2: Attached is the modified CAB
WWE 6.1 with English only release
This version includes English, with eT9 Input method, MS/Cyberon Voice Command and finally, Segoe Font. Not only does this version look official but is also very fast and stable.
Perform this prior to installing ROM:
Error 270 Fix
MediaFire Download Link: Windows Mobile 6.1 Final - By Kavana
4shared Download Link: Windows Mobile 6.1 Final - By Kavana
File: RUU_Excalibur_WM61_Kavana_080408_WWE.exe
Size: 47127307 bytes
Modified: 2008/4/7, 21:28:34
MD5: 81E9C80DD46A334CA0F75AF00CC15B41
SHA1: 80655BEC19B24F72E34568176872C49135CE57AE
CRC32: 11F4C230
Built with ROM Update Wizard - You don't need to know how to unlock your Excalibur as everything will be done by the wizard automatically.
-------------------------------------------------------------------
Excalibur WM6.1 ROM by Kavana - Based on Brightpoint 1.33
Language: English
Works on T-Mobile Dash, HTC S620 & S621
Setup Instructions:
Run RUU_Excalibur_WM61_Kavana_080408_WWE.exe
Reboot you device
After Reboot - Choose Voice Command
MS Voice Command will be the default voice command, so if you press cancel, it will be defaulted to MS Voice Command. However, If you do choose Cyberon Voice Command, you need to reboot.(Difference between these two kinds of voice command is that Cyberon voice uses voice-tags that you record, whereas ms voice command doesn't need you to record voice tags(but spoken language only support English)
After this, install the following has the keyboard has mapping problems:
eT9 with 14 languages suppport addon(spanish, french, german and italian)
Download Link: eT9 Full
(because eT9 has lots of keymapping problems so the 080330 version changed input method back to xT9,for someone who want to add spanish, french, german and italian)
-----------------------------------
The following is built into this ROM:
0.Unread Message Alert( Reminds you every 15 Minutes - You can disable it in the sound settings, if you'd like)
1.WindowsLive
2.Office6.1+OneNoteMobile
3.Jbed Java VM (support full screen game)
4.Resco Explorer 6.17
5.Dot Net Compact Framework 3.5
6.OMAPClock(Overclock and also keeps chosen frequency after reboot)
7.dbExplorer 2005(it can modify vol database)
8.HTC Flash
9.Orneta Calc
10.Bluetooth FTP
11.LowLight (Touch JOGGER 3 times in 10 seconds will open Lowlight.Attention,this will maybe make your backlight always on if you don't close it.)
12.CeleTask Special Version
13.WM5torage 1.8
14.Clock On Top (12 or 24 hour style,change is in bottom of clock settings)
15.BaseHue Express
16.SMSDeliveryNotify Fix
17.PDF Reader(Original name is FoxitReader)
18.Real Media Decoder
19.MS Voice Command
20.Orneta Notepad
21.AlReader2
22.Oxios Alarms(put it in the clock&alarm settings,called all alarms)
23.xT9 with 10 kinds of languages support
24.HTC Connection Setup(can setup your network for Operators all over the world)
Key Shortcuts:
Double touch bottom JOGGR button to Free Memory
Long press IE will run Connection Manager
Long press #, Changes profile to Meeting
Long press Home, Run Ms Voice Command
Short Press IE, Run Celetask
Modify Shortcuts:
You can change the settings in here for desired action
You can Modify shortcut short_Camera.lnk, short_IE.lnk and short_MSG.lnk in Windows folder to change the Camera button,IE button,Message Button Mapping to the desired shortcut.
Connection Setup:
To setup GPRS and MMS ,plz execute HTC Connection Setup in StartMenu\Accessories\Connection Setup
--------------------------------------------------------------------
ROM Changes
What's new in 080408 final:
Update to new real WM6.1 MS Bluetooth stack
remove IrDA menu in Active Sync
What's new in 080318:
add 12 hour clockontop,and it'll be default
add spanish, french(AZERTY Layout), german(QWERTZ Layout) and italian support for et9
add options to choose voice command(Microsoft or Cyberon).
Dash keyboard map will be the default map of eT9.
Unread Message Alert will be disabled as default.
Jogger Bar run lowlight will be disabled as default.
Only PrimarySplash and OS part in nbh file
ROM Update Wizard Updated
Fixd 'z' in contact searching
ZeRo "0" Issue Has Now Been Fixed,SYM button has been fixed
What's new in 080330:
add Orneta Notepad Endlish version
change eT9 back to xT9(because eT9 has lots of keymapping problems,for someone who want to add spanish, french, german and italian)
Fix Cancle->Cancel button translate in CeleCmd
Fix ModelName shows in Vista from DopodC720W to HTC-S620
Add Radio(ver 03.07.90) part to nbh ROM file
What's new in 080314:
fix google link in IE Favorites to WWE
fix JOGGER ext settings
fix Calender default view style
change Java VM to jbed from HTC kaiser,and it has been patched to support Smartphone.
What's new in 080312:
Update to new kernel
Full English version
Fix Internet Sharing
What's new in 080308:
fix some lable translation in the JOGGER settings in English
fix the SlidingPanel Setting shortcut.
fix the items order in QuickApp
remove sms bubbles (cause wm6.1 is threading message,and smsbubbles dosen't support muti-langusge)
remove GPRS Monitor (all of the Efficasoft GPRS Monitor(also PPC version) can't work fine in WM 6.1 cause it will lost all data after every reboot)
add english interface to the PDF Reader(real name is FoxitReader, much better than Adobe Reader LE)
add settings to Clock setting to close the ClockOnTop
Update the OMAPClock ,now it can keep the frequency you set,i set the clock to 264MHz,very fast,also stable,
include HTC AudioManager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can someone tell me why whenever I use the USPL.bat and run all that crap on my phone, hit YES twice for haret.exe and all that, but the screen won't go black. It stays all white and I can't flash anything. Really getting on my nerves.
What I do for Flash this ROM:
run unlock.exe - for unlock the software
run the RUU exe
Everything else are "press any key", "Y/N", "Next" and that's all .
When the RUU exe works my screen is white.
EDIT: Haret is for official (no cooked) ROMS and maybe is not compatable with this rom
tibby05 said:
Can somebody please help, i have gotten to the white screen after running Excalibur USPL- CID BYPASS and running haret.exe , now i try to run the 6.1 rom and it takes me back to the black command screen like haret did and isnt connected to my fone anymore, PLEASE IM ME ON AIM IF YOU HAVE IT, disturbndapeace5
Click to expand...
Click to collapse
TAKE OUT BATTERY PUT BACK IN AND TRY AGAIN AND DONT USE Excalibur USPL- CID BYPASS
Sap You Remember The Old T9 And Set JogBar Trick
oldsap said:
How do i turn off the predictive text in english?
Click to expand...
Click to collapse
The easy way, in other words install T9 app copy to the Window directory and also install the JogBar app, check or uncheck mark the box "Enable xT9 input", soft reset your device OK, Click the "alt" key to get away from the chinese writting......!
How To Turn Your Device To English!
When you device comes back after you have installed the new 6.1 upgrade software, go to Start> Settings> #7(More)> #5(Regional Settings)> and change the Lanuage to: (US English), soft reset your device. When your device comes back up, it will be in (US English), but go back to the (Regional Settings) again, this time set the "Locale:" and set the "Short date style"! To write in English ( the easy way) install the T9 app to your device and copy it to the windows directory and install the JogBar App and check mark enable T9 text, soft reset your device, that's it..........!
theres a fix for theme
theres a fix for theme
kCed said:
im a noob at this stuff...how exactly do i go abouts installing this thing??
do i have to reset my phone again like i did with the update
Click to expand...
Click to collapse
1. Remove your Mini SD
2. Power Off then Power ON your phone
3. Sync your phone to your PC
4. RUN the exe file, follow the instructions.
Technology said:
Make sure Your devices is app unlock, before installing the new 6.1 ROM...!
Click to expand...
Click to collapse
install this to app unlock your device
chelsea_fc said:
please somebody how to change font to cleartype??
Click to expand...
Click to collapse
HI chelsea_fc,
HKLM\system\GDI\
new key:ClearType, then new DWORD in the key named ClearType, Dword data=1.
Reboot your device, done.
qaplus said:
Does Tmobile proxy trick works on this ROM?
Does Google Map My Location work on this ROM?
Click to expand...
Click to collapse
Yes the T-mobile proxy "trick" works just fine.
qaplus said:
Help!! I'm in the middle of flash!!
Now it asks me ""execute SPL now - press center button on your Excalibur and screen should turn nearly white". What should I do?
I click the center button on the direction pad, but the screen doesn't turn white?
Update: I found JumpSPL.exe under phone root directory. So I executed it, now the phone stops at a screen says: Jump Address 0x00000, and a OK button. What should I do now?
Please help....
Click to expand...
Click to collapse
Just make sure that once you hit enter and the screen on your phone goes white, you need to go to ActiveSync - Connection Settings - and disable USB Connections. Then proceed with setup.
kevitoNY said:
i will attempt to flash again is that unlock file in the USPL folder supposed to be an exe file cuz for me its a cab that i have to install into the phone
Click to expand...
Click to collapse
first thing you have to do is install the application unlocker, then remove your microSD, then reboot your phone, then upgrade your phone
oldsap said:
(5)Getting your device to write in English, you will need to install the "eT9 text app" to your device, and copy it to the windows directory, soft reset your device, next, install the "JogBar" app and check mark the box "Enable T9 " and you use the "alt" key to exit out from the Chinese writing.
i've installed the eT9 text app, and rebooted, then installed the JogBar app and checked the Enable T9 already. But when i write a text file and i press alt+space, the setup for keytouch still appears. i still don't have the eT9 thingy. i can't get to this part: and you use the "alt" key to exit out from the Chinese writing.
Any help guys?
Click to expand...
Click to collapse
Oldsap,
What are you trying to do exactly? Get the entry field/T9 in English? If that is your question, I didn't use the JogBar app was able to get mine in all English doing the following:
1) Hit alt-space when in some type of text-entry field.
2) Press up (Setup).
3) Select 2-EN (for English).
4) 'Display Candidates List' will pop up (Yes if you want them)
Then, when back in some type of text-entry field:
1) Hit alt-space, then
2) Press down on the pad (Lang), and
3) then Left (to select EN).
That worked for me. Make sure you have changed your regional settings in all areas as well and, as you mentioned, dropped the attached file into the windows folder.
Let me know if that works, if not, I'll rethink what steps I took.
The messaging shortcut (e.g. short_msg.lnk) is fixed to open up the text messaging. As I want the 'account picker' to be displayed, the link needed editing.
Here's the attachment. Just unzip and drop in your windows directory and replace the ROM's version. If you like it defaulting to the text messaging and don't care about the account picker, you don't need to do anything.
gadgetshrink said:
The messaging shortcut (e.g. short_msg.lnk) is fixed to open up the text messaging. As I want the 'account picker' to be displayed, the link needed editing.
Here's the attachment. Just unzip and drop in your windows directory and replace the ROM's version. If you like it defaulting to the text messaging and don't care about the account picker, you don't need to do anything.
Click to expand...
Click to collapse
just use Accessories\Command Processor input:
LINK %W\short_MSG.lnk,tmail.exe,-service "SMS"
then press Processor
I've fix the MSG button in the original keyboard driver,so now you can map the MSG button to any app.just rename the app link name to short_MSG.lnk and put it into windows folder
MMS
curtislanham said:
Is anyone else having problems with MMS? Using the settings on the T-Mobile wireless configurator, I am able to send pictures to others, and they receive them ok. However, I cannot receive incoming messages. When I try Send/Receive from the MMS menu, I get "Error Synchronizing"
Click to expand...
Click to collapse
Try setting your carrier as the default MMS......!
montai_hotmail said:
I have problem with internet sharing program. When I try to press connect but nothing happen. Anyone have the same problem?
Click to expand...
Click to collapse
Use this cab, and install to main memory. Fixed it for me although no items are shown in the PC Connection and Network Connection. I'm using it to tether while writing this e-mail. The original thread this came from is found here: http://forum.xda-developers.com/showpost.php?p=1949360&postcount=644
estranged_inc said:
This is a great ROM, well built.
Given my device now thinks its a Dopod c720w, clearly that is the origin of the ROM. A question though - is this WM 6.1 build based on an official Dopod build? Or is it based on beta code?
I have also noticed that the Internet Explorer in this ROM does not have issues with php pages like the latest HTC official build.
Love it, and thanks
Click to expand...
Click to collapse
Base on Brightpoint 1.33
Cause I'm a chinese,in china Excalibur call DopodC720W,so i change the name to DopodC720W,you can OverWrite the ModelName.txt in Windows folder to change the Module Name.
littleclown said:
After 30 min testing I can say - best rom ever.
I will This is new HTC WM6 ROM v.s. Kavana WM6.1 ROM for me:
Kavana ROM:
+more settings
+more software
+easy installation
+better IEP
+cool default theme
+more language layouts
HTC ROM:
+Better Radio
+More free RAM
+Official release and thats why Less buggy
Important for the new Kavana ROM - everbody who don't use voice command, must remove voice shortcut from windows/startup directory - this will increase free RAM and battery life.
Click to expand...
Click to collapse
I use Radio the same as HTC's last 1.33 official ROM.
Hello,
since I own my HD i really got used to Manila, but still I missed some functions and infos. So i designed a theme for Homescreen PlusPlus UI to have an advanced Actionscreen with some System- and Connection-Informations. It is very customisable, you can edit the xml file to add functions or informations you like. Big thanks to Chi-Tai Dang for his great Tools!
Install instructions:
First you have to install "Second Today" and "Homescreen PlusPlus UI (Advanced Edition!)".
Both tools can be found here: www.chi-tai.info
After the installation copy the zipped folder "Actions" into the Homescreen PlusPlus directory ("\Program files\HomeScreen PlusPlus\Actions" or however the Program folder is called in your language) and also copy the Actions_eng.xml into the Homescreen folder (not in the Actions folder!)
Copy the "Manila.jpg" into your Wallpaper directory.
Assign Second Today to TouchFlo Softkey:
- use a Registry Editor to edit HKLM\Software\HTC\Manila\HomeRSKPath (or LSK) to \Program files\SecondToday\SecondToday.exe...
- ...and enter a name in HomeRSKText (or LSK)
Second Today Setup:
- start "SToday Settings" and select the Manila.jpg as custom Backgroud
- activate only the HomeScreen PlusPlus Plugin
- set the Soft Keys, one should be assigned to "\Program files\SecondToday\SecondToday.exe" to be able to switch back to TouchFlo
Configure HomeScreen Plus Plus:
- tap and hold on the default Homescreen Theme, select options
- in "General" Tab select "Show CPUSpeed"
- in "Indicator" Tab select "Shwo more Indicators" and "Show Powerdrain"
- in "Adavanced" Tab select the Theme Actions_Eng
- in "CallTimes" Tab select "Count Call Times" and all other options, setup your Count Plan
- in "Data Calls" Tab select all options and enter you Data Plan details
- thats it, tap ok and enjoy the new HomeScreen
If not everything is shown tap an hold in the header and check in "Show rows" if all rows are selected.
A german XML-File is also included in the ZIP-File.
For further informations regarding th customisation of the XML file check www.chi-tai.info
---UPDATE---
Default email Account:
The create email button leads to a Hotmail Account (my default account). To change it to your default account just edit the XML-File and enter your account in line 14:
<Item class="space" ontap="StartApp" path="\windows\tmail.exe ::-service "your account" -to "" ">
Button function problems:
By editing the XML-File you can also change the functions of the other buttons if they don't work for you, for example in non-Stock roms.
See post #9 if you have problems with Dutty's EXTREME ROMs. Thanks to Ascenca83 for his fixes.
Switching Animations:
If you want to switch between the three screens with animations (e.g. rotating cube, slide out, zoom in, alpha blend in,...) you can edit the animate attribute in line 2 of the XML-File from "0" to the animation you like. You can find the different animation numbers here:
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_ext_cust_im_cs.htm#animate
Hello,great job ! I install it immediatly and translate xml file . Thanks .
Thank you very much
Great work, now my HD gets better and better, nearly perfect..... .
Tahnk you, the German Version works great.
looks sweet.......
will this work with dutty's 2.5 or you got to have a stock rom??
Hi
I dont know why, but every time I try to install the "Second Today" or "Homescreen PlusPlus UI (Advanced Edition!)" cab I receive a message that the installation was not successful. Does anybody know why this could happen?
I am on a dutty XTREME 2.4 rom. Or is "Second Today" and "Homescreen PlusPlus UI (Advanced Edition!)" not compatible with the new v3 manila from the rothium/topaz?
Thanks in advance!
Ascenca
I'm using it on a stock rom, but normally it should work with other roms too.
The tools should be installable.
Chi-Tai wrote the following in his forum:
"sometimes other today-plugins interrupts installing of HS++UI. A workaround is to disable any today-plugins, then install HS++UI and enable the today-plugins afterwards."
Perhaps you can try to disable TouchFlo for the installation of the tools.
Also after disabling all today plugins (icl. tf3d) I wasnt able to install the ST and HS++
Are there other propositions to install these progs?
Worked great on a stock rom Norwegian! Excelent
So I finally got it working (had to use the V0.4.0 of ST and the exe installation of HS++ 1.06).
There are 2-3 things which doesnt work right on the new manila v3 rom:
1. The Email button doesnt bring me right to the email input interface (I only get the screen, where I can choose my Internet account)
2. Same thing as mentioned in 1. happens with the MMS button.
3. The calculator Button doesnt start the calculator, nothing happens.
4. CPU Speed wont be displayed also its checked in HS++ options.
All other buttons seem to work as they should! Really nice work!
Could you help me to fix my above mentioned problems? Would really appricieate it!
Edit: I now fixed problems 1,2 and 3.
I now linked psShutXP instead of the calculator (and made a new icon for it).
I linked the Email to my gmail account.
I linked the MMS icon to the MMSLauncher.exe
What I changed in details in the Actions_ger.xml is the following:
For the Email:
<Item class="space" ontap="StartApp" path="\windows\tmail.exe ::-service "Hotmail" -to "" ">
<image src="Mail.png" left="47" top="85" />
</Item>
to
<Item class="space" ontap="StartApp" path="\windows\tmail.exe ::-service "Gmail" -to "" ">
<image src="Mail.png" left="47" top="85" />
</Item>
---------------------------------------------------------------------------------------------------------------
For MMS I took the MMsLauncher from the ammar 12 button action screen:
<Item class="space" ontap="StartApp" path="\windows\tmail.exe ::-service "MMS" -to "" ">
<image src="MMS.png" left="341" top="85" />
</Item>
to
<Item class="space" ontap="StartApp" path="\windows\MMSLauncher.exe">
<image src="MMS.png" left="341" top="85" />
</Item>
---------------------------------------------------------------------------------------------------------------
I changed the Calculator to the Program psShutXP:
<Item class="space" ontap="StartApp" path="\windows\mobilecalculator.exe">
<image src="Calculator.png" left="341" top="325" />
</Item>
to
<Item class="space" ontap="StartApp" path="\Program Files\psShutXP\psShutXP_nosc.exe">
<image src="shutdown.png" left="341" top="325" />
</Item>
---------------------------------------------------------------------------------------------------------------
To install my mod do following:
1. Install and setup the programs as written in the first post.
2. Download the attached Ascenca_Mod_HS++.zip file.
3. Place the shutdown.png into the "\Program Files\HomeScreen PlusPlus\Actions" folder
4. Place the MMSLauncher.exe into the "\windows" folder
5. Place the psShutXP Folder into the ""\Program Files" Folder (if not already installed there)
6. Replace the Actions_ger.xml with the one in the zip File (never forget to make a backup!)
Now everything should run as it should on the Dutty XTREME ROMs
Keep up the good work!
Ascenca
Hi Ascenca,
great that it works for you now and thanks for your fixes.
I forgot to mention that you have to enter the email account you wish to send your emails from, I will put this info in the first post as well as your other comments.
The good thing about HS++ is that you can edit the xml file easily to add the functions you like and get a fully customized Actionscreen. You only have to create the corresponding icons.
Hope you enjoy your additional Homescreen...
bennib.
edit:
@Ascenca83 regarding problem 4:
If you want your CPU Speed to be displayed on the Status screen you have to assign the item class "cpuspeed" to one of the lines in the xml-file.
No its ok. The CPU Load is much more informative. Only problem is that it will only be displayed after 4-5 seconds. Cos of that I always thought it wouldnt work. But its working as it should. Perhaps I will lower the polling rate so the percentage will display sooner.
Thanks again for your mod! Really awesome!
Ascenca
Thanx, great work! This is the kind of launcher i wanted all the time.
I'd like to change certain things, remove things i don't need and replace them with, for instance, reset button, or something else. Where would i get the exact application paths or registry settings for this? Any wikis, guides or lists on this somewhere?
edl said:
Great work, now my HD gets better and better, nearly perfect..... .
Click to expand...
Click to collapse
Care to give a list of apps, tweaks & customizations you have?
good work..thanks
Italian version for manila V3?
Hey guys,
Having some trouble setting this up. After installing HomeScreen and SecondToday and following the directions, when I launch SecondToday and check HomeScreen PlusPlus and go back to SecondToday, nothing happens. Did I miss something?
Thanks!
I'd love to be able to use this but one problem, I'm already using one instance of HomeScreen++ with a TF2D Blue_Ocean theme.
Is there a work around for this? I tried installing BatteryStatus but it didn't work right because some of the tabs were missing for some stuff..