I recently I upgraded my HTC Touch Diamond ROM to 1.93 by unlocking the device. I also formatted everything when installing the new OS. After that, I no longer cannot run mapking. I received "We're sorry...a problem has occured ith manila.exe" message and mapking crush....
Can any body help me the solution ???
wunna said:
I recently I upgraded my HTC Touch Diamond ROM to 1.93 by unlocking the device. I also formatted everything when installing the new OS. After that, I no longer cannot run mapking. I received "We're sorry...a problem has occured ith manila.exe" message and mapking crush....
Can any body help me the solution ???
Click to expand...
Click to collapse
Try performing a hard reset and report back.
Also, please tell us more about your device.
ps - hard reset: hold volUP and the center button while pressing reset. you should get a gray screen with 2 options. Press volUP again at this point. When it's done, it will tell you to press volUP to reboot.
What Information I need to provide ? I am now in Malaysia and bought from S'Pore phone shop. I think my phone warranty is only for SG.
I cannot download ROM Upgrade version from HTC. The message .."sorry. this software...." was displayed. Then, I used CID Unlocker to upgrade my ROM...
Actually, my Mapking was running in last version of ROM. It just happened after upgrade to 1.93.
What else i need to provide ?
Hi,
I just did the Hard reset as what you mentioned. Still got the same thing.
Rgds
Hi All,
Now OK. I just FORMAT again my internal storeage with FAT32 format.
Thanks..
Are you using stock rom (ie. from HTC) or cooked ROM from this web site?
I am using Dutty's ROM with PAPAGO R12 which is the equivalent version of Mapking R7 (i think). I have no problem with PAPAGO R12.
formatting the internal storage with fat32
I had the same problem, how do i format the internal storage with fat32? i can't find the format option.
Related
I figured this out by accident..
I upgraded to windows mobile 2003 SE 2.06 but after I found out that half of the programs (MMS composer, cammera, etc..) dont work, due to incompatibility (error message says they are incompatible) I wanted to downgrade.
I ran the same ROM instalation (2003 SE 2.06) and waited for it to erase my ROM, then I took the phone out of cradle. I was dead at that point. I removed main battery, put it back in. Reboot the phone in bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time). Then I put the phone back into the cradle and ran the ROM instalation of my choice. No more problems.
Well, I think using SD card method may be saver.
However, I forgot how to do this.
Cheers,
Darko3 said:
I figured this out by accident..
I upgraded to windows mobile 2003 SE 2.06 but after I found out that half of the programs (MMS composer, cammera, etc..) dont work, due to incompatibility (error message says they are incompatible) I wanted to downgrade.
Click to expand...
Click to collapse
Same thing, I badly need to downgrade to 1.72 or 1.66. I tried it, it did not work. I was was adviced that there is a 1.66 SD version which is safe and possible to apply, any advice where can I find it???
Bty, MTUX 1.4 Ring tone, and other software runs very slow and creats porblems with 2.06!! Beside 2.06 hard reset by itself on weekly basis!!!
Any advice where to find 1.66 SD version?
HELP HELP HELP....
hello people...
i desperately need to downgrade from wm2003se to wm2003. please tell me where can i find my original rom of wm2003. thanx you.
by the way... my ppc is an O2 Xda II.
please do help somebody... its kinda urgent...
hi fds,
my vodafone died today when i tried to update it with a new rom. i was using Vodafone latest rom and i tried to update it to Qtek rom. after the installment finished and i hard-reset my machine, it cant boot up and have no response.........when i hard-reset again, it can show the menu of "clear memory press 0".............
my fd have told me to press Power botton and light botton to enter boot mode and install new rom again......but finally got no response too....i have tried twice!!!!!
my vodafone seems died now!!!!
i dont know what i should do!!!
everyone can help me?! please teach me how to "save" it!!!
100000000000000 of thanks!!!!!
Dont worry my friend it is not a difficult situation first of all and happends with alomst every 3rd person upgrading rom.
Adopt the following sequence.
1 - Enter boot loader mode as described by operator
2 - When you see usb or serial mode then you have a working unit which can be saved.
3 - The problem (if boot loader is active) is only due to radio rom just upgrade it.
4 - To upgrade only radio rom you have to do the same things you did for whole rom but keep out ext and os rom out of package.
5 - if problem persist then use Radio rom version 1.09 instead of current one
Hope this will help you if not please contact
hi rikram,
thx for your reply!
as you mentioned, i have download a rom specially update the radio ONLY?
Can i find it in this web's ftp?
Kindly please advice....
thanks!!!
as
rikram said:
Dont worry my friend it is not a difficult situation first of all and happends with alomst every 3rd person upgrading rom.
Adopt the following sequence.
1 - Enter boot loader mode as described by operator
2 - When you see usb or serial mode then you have a working unit which can be saved.
3 - The problem (if boot loader is active) is only due to radio rom just upgrade it.
4 - To upgrade only radio rom you have to do the same things you did for whole rom but keep out ext and os rom out of package.
5 - if problem persist then use Radio rom version 1.09 instead of current one
Hope this will help you if not please contact
Click to expand...
Click to collapse
furthermore, i would like to ask why this problem occur?
my fault ? or just some simple system error?
i am so worried of it.......
Yes you can find it in ftp files section or you can detach it from latest vodafone rom package just unpack exe and and copy radio rom
This is not your problem just a system error in upgrading process
rikram said:
Yes you can find it in ftp files section or you can detach it from latest vodafone rom package just unpack exe and and copy radio rom
Click to expand...
Click to collapse
Sorry, i really dunno where is the suitable file......
i want to confirm that i should download from following link?
ftp://xda:[email protected]/Universal/Shipped_Complete_Updates/
and how to unpack exe ?
thanks!
i have tried to update to dopod rom last nite and it work!!!!!!
my vodafone are "woken up"!!!
thanks!!!
My vodafone V1640 has funny colour on the screen after I update the rom, I have tried hard reet soo many time nothing works seemd like it jam , can anyone pls help me how to resolve this ? thkyou I really appreciate it
I am very frustrated with my HTC Touch Diamond as I am trying to update it to Hard-SPL yet when it's plugged into the computer (with active sync running) and I follow all the directions very closely, I go to update the phone and it doesn't show any activity on the phone, the progress bar on my computer screen shows 0%, then it eventually pops up with a message saying Error 202. This is a connection error, yet I am positive that the phone is plugged into the computer. Please HELP!
Hello, Did you run SSPL first? You can only flash hard spl when sspl is active it is a black screen.
I have a Telus HTC Touch, does that make a difference on whether or not this will work?
your diamond is cdma. these only work with gsm.
so by the word 'these' in the last post, you mean that the Rom updates won't work?
I don't think SPL has to do anything with CDMA or GSM. Some ROMs have an option in the phone settings to choose either GSM or CDMA.
ryanseyz: Make sure you have a factory ROM ready before trying the cooked ones here so when things happen unexpectedly, you always have a choice. Next, there are 2 versions of SPL here, try both. Make sure you install EnableRAPI.cab and CertSPCS.cab installed on your device.
Regards,
Carty..
anyone has a solution for this yet? I'm experiancing the same problem with my Touch Pro, can't seem to get it to work.
I installed both files like mentioned above but still give error 202.
The funny thing is it does recognize the current version of my rom (stock).
Greetings,
Phyrax
Phyrax said:
anyone has a solution for this yet? I'm experiancing the same problem with my Touch Pro, can't seem to get it to work.
I installed both files like mentioned above but still give error 202.
The funny thing is it does recognize the current version of my rom (stock).
Greetings,
Phyrax
Click to expand...
Click to collapse
The same here with my mda compact iv. I've tried all versions of the RUU of hardSPL with no result (error 202). When I update the official rom of t-mobile (1.93) with the RUU, there isn't a connection problem and everything goes well.
My device is not simlocked, but i suspect it has a security lock or something like that.
Hello, I have the same problem with a HTC Diamond : error 202 and everything is connected, hotsynched, etc.
Did anyone find a solution ?
anyone??? im having the same problem..
I'm having this issue as well, any solutions?
The same problem
I have a HTC Touch Diamond and have the same problem.
I don't know what i have to do to fix this problem.
I have got the same problem. Add I have problem with align screen, so I can't run any cab on device. Looking for any advice..
i have a htc mda basic ....same problem...any solution...please help....
I'm not sure, but if i'm not wrong i had the same 202 error code last time i tried to reflash original (stock) spl, for warranty reasons. I solved the problem flashing stock spl (from hspl 1.93 olinex) with the phone conencted to activesync: run sspl-manual.exe from the device (previously copy sspl-manual on the device): the phone will go to black screen; than run the normal romupdateutility.exe from pc, and follow ordinary instructions.
Hope this could help.
Dudubai said:
I'm not sure, but if i'm not wrong i had the same 202 error code last time i tried to reflash original (stock) spl, for warranty reasons. I solved the problem flashing stock spl (from hspl 1.93 olinex) with the phone conencted to activesync: run sspl-manual.exe from the device (previously copy sspl-manual on the device): the phone will go to black screen; than run the normal romupdateutility.exe from pc, and follow ordinary instructions.
Hope this could help.
Click to expand...
Click to collapse
Thank's..., this solution work for me...!!!
For me too !!! working now !
Thanks it work!
Thanks !!! It works !!!
Hi guys,
i got an HTC diamond from France (orange telecom) it came with a signed rom windows 6.1 version but of course in french.
so i went upgrading the ROM by installing the following :
Hardspl:Unsigned-Hard-SPL-Diamond-OliNex 1.93
RADIO: 1.00.25.05
ROM :BSB6.5P
i did the upgrade by copying DIAMIMG.nbh to the internal sotrage and rebooting with volume Down + back button
the upgrade went successful but after a while i have noticed the the system is freezing and it hard reset while applying a soft reset, i went through the forums and upgrade to BSB6.5Q but didn't solve my problem.
now i am using the Don Salari WM6.5 light Version 2.09.162.1 WWE.
a difference that the freezing is gone but the hard reset while applying a soft reset occurs sometimes especially if my phone was low in battery.
can someone please help me with this, i am really in need of a solution and i just bought this device and not refundable
thank you in advance,
I don`t know if it will help but I would try to update the radio to a newer one for example 1.13.25.24 or the 1.15.25.14
read my rom first post again.....
well i'll save your time quoting it:
IF YOU HAVE FREEZES/HARD RESETS/STRANGE PROBLEMS USE MTTY YES MTTY MTTY MTTY MTTY MTTY MTTY MTTY MTTY AND IF STILL PROBLEMS UPGRADE TO HARDSPL 1.93 (tutorial here, thanks to MG)
Charbelh said:
Hi guys,
i got an HTC diamond from France (orange telecom) it came with a signed rom windows 6.1 version but of course in french.
so i went upgrading the ROM by installing the following :
Hardspl:Unsigned-Hard-SPL-Diamond-OliNex 1.93
RADIO: 1.00.25.05
ROM :BSB6.5P
i did the upgrade by copying DIAMIMG.nbh to the internal sotrage and rebooting with volume Down + back button
the upgrade went successful but after a while i have noticed the the system is freezing and it hard reset while applying a soft reset, i went through the forums and upgrade to BSB6.5Q but didn't solve my problem.
now i am using the Don Salari WM6.5 light Version 2.09.162.1 WWE.
a difference that the freezing is gone but the hard reset while applying a soft reset occurs sometimes especially if my phone was low in battery.
can someone please help me with this, i am really in need of a solution and i just bought this device and not refundable
thank you in advance,
Click to expand...
Click to collapse
Hi,
As Makeveral Said You Can use MTTY or FLASH A STOCK ROM!
same problem, solved flashing original rom, and reflashed cooked rom.
Why MTTY thread is not sticky yet?
PS. I used once this stock rom:
http://uploading.com/files/WY03RBG2/Stock rom noSPL no Radio.rar.html
Now I am using MTTY it saves my time
Followed the MTTY step by step
Guys thank you for your reply,
Makeveral, I've followed the MTTY instructions and flashed a rom from my internal memory i have flashed the BSB65Q (i like this ROM).
i will test the device for couple of days and keep you updated.
only one question is it necessary to update the Radio ?
thank you.
I downloaded Rhodium-HardSPL_V2_00R3_185HSPL.zip and unzipped but i cant perform hard spl using this.. it says error[246] device not responding.. it is not allowing me to perform both the automatic and manual hspl.. even i hard reset my mobile before performing HSPL.. I am in UK using Tmobile Touch Pro2 ROM version 1.86.401.0 (67102)WWE; Radio Version 4.49.25.17.. Please anyone help me to perform HSPL and install the Cooked rom...
Edit/Delete Message
Is your phone service on? It can't perform HSPL if it isn't on.
You might want to check that your phone is synced to Windows on your computer.
Vista needs Windows Mobile Device Center installed to sync I believe.
Had lots of issues doing the same thing to my Tilt2.
Here is what I did. I deleted any partnership in Activesync (probably did nothing but did not hurt)
downloaded enablerapinew.cab and installed it on memory card
did a hard Reset (actually 2 but hey who knows)
Moved enablerapinew to phone, removed SD card and ran enablerapinew.cab let phone sync with whatever name it wanted.
Once synced I ran the installer in automatic and it worked.
I spent 4 days trying everything so there is hope.
Thank u INRBigness i removed my Memory card and it works... Thank u very much
flashing touch pro 2
i have tried every trick in the book to get the hard spl on my touch pro2 from sprint. i am ready to give up and just suffer with the stock rom. please help!
As the OP's device is in this shape in his other thread here it's no wonder the HardSPL is not working.