Related
Hi folks,
a quick question: since I am using WM6 my tytn always displays the today screen after comming from the suspend mode or blanc screen. This was definitly not the behaviour it did with WM5. An example:
When I'm listening to music with the built in Windows Media Player I like to turn off the screen (using the built in blanc screen function) to save battery. When I switch on the device again to change music or something the device always displays the today sceeen instead of the media player application and I have to switch back to the media player window manually. That drives me crazy as it is not the way it behaved using WM5.
Is there any possibility to change this behaviour in the way, that WM6 shows the last used application instead of the today screen when resuming from suspend mode or blanc screen?
Thank you!
Check you Today settings.
Go to Start>Settings>Today>Items tab and investigate the "Today Timeout" setting.
Timtown said:
Go to Start>Settings>Today>Items tab and investigate the "Today Timeout" setting.
Click to expand...
Click to collapse
I checked this already. The described problem is not related to the Today timeout setting. It appears every time, after a few seconds blanc screen anyway. Try it, you'll see.
i have also experianced this, is really annoying, anyone have any ideas how to resolve it...?
r3d3 said:
Hi folks,
a quick question: since I am using WM6 my tytn always displays the today screen after comming from the suspend mode or blanc screen. This was definitly not the behaviour it did with WM5.
Thank you!
Click to expand...
Click to collapse
Hi!
The best prgm I used for this reason is PPcsoft psShutXP u can have it on tray and u gona have 3 alt. Light Off Shut Down and Soft Reset strike on Light Off it works fine
I like this "feature". Problem I have is if I leave outlook open, I don't get a LED notification of new mail. At some point I had a ROM installed that always went back to the today screen and seem to resolve my issue. Is this something that can be changed in the registry?
Cal
nobody knows anything about that? Can't believe that there are not more people out there, who suffer from this issue
r3d3 said:
nobody knows anything about that? Can't believe that there are not more people out there, who suffer from this issue
Click to expand...
Click to collapse
Hi!
I think if u try the program I mentioned at #5 u gona like it. Here is the link
http://ppcsoft.narod.ru/english/
same problem here...
BatteryStatus
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.
lonwas said:
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.
Click to expand...
Click to collapse
I do not use BatterySTatus but I'll try it for solving my issue
Abo Forat said:
Hi!
I think if u try the program I mentioned at #5 u gona like it. Here is the link
http://ppcsoft.narod.ru/english/
Click to expand...
Click to collapse
Thanks for sharing the link but I think, this will not solve the problem for me: as far as I can see you have to go to the today screen anyway to reach the buttons this tool provides. So I haven't got anything....
Great stuff! Batterystatus really solved the problem...just set the tool to not show today screen and it works. Thanks for the hint!
(though I really don't understand that MS doesn't support this feature?!)
Hi, its not that MS doesn't support it, its that its enabled on some roms, and others not, mine always returns to whatever app it was on, after suspend, If you wanted to help figure out the cause, I suggest you install sktracker, and do a before and after the battery status install, and see what key that option in battery status is changing, I don't much care for battery status myself.
Start > Settings > Today > Items Tab
UNCHECK the Today Timeout
Today Timeout means that if the device is left unchecked for say, the Default "4 Hours" than after 4 hours, no matter what program window was running, it defaults back to the today screen when the device is reawakened
pssibly a bug in your OS or some program you are running makes it so every time you turn it back on
but uncheck that and maybe youll have some luck??
i had a similar problem with my iPaq hx4700 where if i was at the today screen, it would keep flickering, refreshing it every 1 second
i disabled the today timeout, and viola, its worked fine since
I have this issue too.
lonwas said:
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.
Click to expand...
Click to collapse
Unrelated. I have BS installed and that option is NOT checked, yet it still does it.
This is very annoying, I like mine to sleep after 2 mins (to save power and lock the keyboard). then back to the today screen and have to switch to what I was doing..
Related to the Lock setting?
I have the same problem, and I think it is related to the lock settings. When I enable a simple PIN, my phone always returns to the Today screen after leaving suspend, regardless of the settings in the Today aplet.
If I disable the simple pin in the Lock settings applet, the pone returns to the last used application (unless the today timeout has been exceeded, as one would expect).
Hopefully that will help someone discover a fix. This problem did not occur in WM 5.
pgray007 said:
I have the same problem, and I think it is related to the lock settings. When I enable a simple PIN, my phone always returns to the Today screen after leaving suspend, regardless of the settings in the Today aplet.
If I disable the simple pin in the Lock settings applet, the pone returns to the last used application (unless the today timeout has been exceeded, as one would expect).
Hopefully that will help someone discover a fix. This problem did not occur in WM 5.
Click to expand...
Click to collapse
Hey, you are absolutely right. The problem won't be fixed by Batterystatus. I just mad a hardreset and didn't set a password, so I thought batterystatus fixed it.
It is a bug with the built in password function. So, is there anybody out there, who is able to fix that?
As said before, the Today showing after power-on the device is "another" problem caused by the WM6 Password Lock System. It's necessary to disable the password that locks the device to fix it.
And it's not the only problem. Be warned, don't try this at home!!!; if you got a password active and then you change the Owner Name without changing the password, you will find after the next reboot that your machine is unreachable because the password isn't recognized at all.
Incredible but true!
Hi All,
Does anyone know how to get this working on our beloved HD's? I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
So this seems like the ideal solution - but i can't get it to work!!
I've copied over the file to the windows folder, then soft reset. Changed the registry entry for phoneLockEnable to 1 in HKLM/Software/HTC/Phone but still no joy!
All help would be greatly appreciated.
Regards
DF
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Sorry, i don't have the cab file, i just saw the screenshot and thought 'that's what i need'!!!
Hopefully some bright spark here can help us both (and others probably).
Regards
DF
Beside this transparent canvas, where can I get the orginal canvas?
I am using a offical ROM but I don't see this function!
I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
Click to expand...
Click to collapse
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
take55 said:
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
Click to expand...
Click to collapse
Hi take55,
Yes, i'm aware of the advanced config tweak (also in HD Tweak), and as you correctly state, the screen should/will go blank on call connection (i'm running kwbr's A Touch Of HD 3.3.4 and mine doesn't, even with tweak applied!!).
Unfortunately, when the call ends and you move the phone away from your ear, the screen still stays blank????? I've read somewhere on these forums that it never will work like the iphone (not sure why, as the light sensor should recognise that we've moved the phone away from our ears).
So that is why i'm trying to get this other method to work. What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
It also might be the fact that this was designed for the Diamond (found the cab on the Diamond forums).
Just hoping some genius here might now how to sort this.
I've attached the cab file i've found, give it a try and see if you have the same issue as me.
Regards
DF
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Datafanatic said:
What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
Click to expand...
Click to collapse
It has nothing to do with the BMPs but with the registry setting that the CAB also makes. It sets HKLM\Software\HTC\Phone\PhoneLockEnable to 1, in wich case you'll have to press the power button to unock (no need to soft reset). For the BMP to work the phone/dialer software will have to support it, otherwise it just locks the phone in the usual way: black screen, power button to unlock.
Datafanatic said:
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Click to expand...
Click to collapse
tks but your cab only for the canvas skin only, do not contain the original software (slidable canvas), anyway, tks for your help
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
rubbermonkey123 said:
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
Click to expand...
Click to collapse
Useful info - I found this particularly annoying yesterday during a ouple of calls.
Also discovered Gyrator tries to turn the phone screen and was laggy - which was even more annoying!
Everyone!!!
CHECK THIS OUT - http://forum.xda-developers.com/showthread.php?t=489034
Answer to all our prayers - a screen lock which uses the g-sensor and not the light sensor.
Now, when a call is connected, holding the phone to the ear blacks the screen, but when you bring the phone down (to use the keypad or something), THE SCREEN COMES BACK ON!!!!!!!
Tried and tested on kwbr's A Touch Of HD v3.3.4 (probably the best manila2 ROM out there!)
Regards
DF
I wanna make another post here cause in the last post this issue wasnt resolved and i wanna fresh thread here, please only post if you have the solution, thanks hope theres someOne who can get this issue resolved.
Do you use AutoKeylock ?
I had this problem when I started using 6.1 ROMs first.
In my case I had about 6 applications I always installed right off the bat after a new ROM flash. One of those was Maniac's AutoKeylock.
I timed the duration between answering a call and having the call go white one day, and it seemed to me to match precisely with the screen timeout settings I had in AutoKeylock.
I removed the application, and have never seen the problem happen again.
However, I do miss having AutoKeylock.
I realize that this could be totally coincidental, and thus I asked before whether others who had the problem also used AutoKeylock but never got a reply.
Perhaps you can reply as to whether you use it or not. And, if you do, whether removing the application resolves the issue for you.
If there is a correlation then we can alert Maniac to the issue, and he may be able to find a solution.
LiverpoolFCfan said:
I had this problem when I started using 6.1 ROMs first.
In my case I had about 6 applications I always installed right off the bat after a new ROM flash. One of those was Maniac's AutoKeylock.
I timed the duration between answering a call and having the call go white one day, and it seemed to me to match precisely with the screen timeout settings I had in AutoKeylock.
I removed the application, and have never seen the problem happen again.
However, I do miss having AutoKeylock.
I realize that this could be totally coincidental, and thus I asked before whether others who had the problem also used AutoKeylock but never got a reply.
Perhaps you can reply as to whether you use it or not. And, if you do, whether removing the application resolves the issue for you.
If there is a correlation then we can alert Maniac to the issue, and he may be able to find a solution.
Click to expand...
Click to collapse
You know if the reason you miss autokeylock is for the ability to set a time for the screen to turn off and the keypad to lock, smarttoolkit does that, with no problems.
HTCP4000PPC said:
I wanna make another post here cause in the last post this issue wasnt resolved and i wanna fresh thread here, please only post if you have the solution, thanks hope theres someOne who can get this issue resolved.
Click to expand...
Click to collapse
How often it happen?
With my phone running Kavanas I will get a white screen once after a reboot and then I press and button and it goes back to normal and wont do it again. I have gotten used to it.
For some reason I think it has to do with Tornado PowerControl, do you have that installed? I just cant figure it out exactly. Maybe we can find a solution.
We'll i believe this White screen has something to do with the backlight settings in power managment, i find if you leave screen on full and turn off the phone from turning off the screen, the white screen wont happen, this isnt so bad, cause if u want the screen to go off just hold down the disconnect phone button, not too bad cause when your not wanting to use the phone anymore the screen still goes off, also you can turn the backlight off in accessories which is the same as setting the screen to go off automatically in 5 seconds, white screen fixed moreless.
Same issue with Ricky's v24 and now with Rose 1.7
I also am experiencing this issue, but do not have installed neither Maniac's AutoKeylock nor Tornado PowerControl.
It happens sometimes during a call, sometimes not.
It happens when leaving the phone unlocked and timesout idle time. If hit the Home or back buttons, it shows the home screen again and next timeout does work fine.
I have beeing looking up and down for fixes but was unable to find one. Some say turning off "Run Lowlight" JOGGR setting, some say flash after a hard reset...
It seems that running lowlight (joggrinfo.exe -m -t) helps a bit. If the phone is fully bright and rests on the table, the screen goes white after timeout.
However, if run lowlight and let it alone, it turns off the screen normally.
Also when it goes white and hit back or home button, the screen goes mid-bright, and then turns off normally.
However, when unlocking, it goes full bright, and then the issue comes back.
In summary ...
Full Bright -> Times out to whitescreen.
Mid Bright -> Times out to lights off.
Unlock -> Goes full bright -> Times out to whitescreen.
White screen -> Hit Back/Home button goes mid-bright -> Times out to lights off.
It would be great if lowlight could be run when unlocking the device.
Does it work same way for you guys??
Regards.
This will stop White Screen from happening.
ok this is a way to avoid the white screen issue, (Click on Light Config) then open CeleTask and in CeleTask - Tools use Close Screen this will turn off your screen and allow the backlight from turning on when screen turns back on, also remember u need to set your power settings to (Backlight time out on battery 5 Seconds and Backlight on AC can be 1 minute which u never use) and Display time out Never..)
You can also use CeleTask to disable the screen when you make a call, just open CeleTesk when you hit call.
Topic should be changed as not a fix but work around "sortof":
Process of illimination:
My recomendation would be try a hard-reset, don't install any programs see if that fixes it now when installing programs don't bung them all on install 1 @ a time soft-reset give it while see if problem resumes, do this for all software then you may find the culprit?
This is not an issue faced by all so something has to be the culprit.
Bad Flash?
Software Install?
JOGGR?
Power Settings?
They are just examples.
I had this happen once but on WM6 and a hard-reset was what was needed and didn't pop up again........
HTCP4000PPC said:
ok this is a way to avoid the white screen issue, (Click on Light Config) then open CeleTask and in CeleTask - Tools use Close Screen this will turn off your screen and allow the backlight from turning on when screen turns back on, also remember u need to set your power settings to (Backlight time out on battery 5 Seconds and Backlight on AC can be 1 minute which u never use) and Display time out Never..)
You can also use CeleTask to disable the screen when you make a call, just open CeleTesk when you hit call.
Click to expand...
Click to collapse
These instructions have fixed my device... I got an Elf and I made it my primary phone, and now I´m experiencing new ROM´s in my S621. This problem happens in my device (the S621, of course), and I´m now using NRG remade by Ricky and Stylez, and this problem with the screen seems to be solved with this tip.
This problem does not happen when I use "Kavana remade by Ricky and Stylez" only with NRG and it´s Remake.
Regards
If this isnt helping try just disabling Timeout and set everything else ur way u want.
i've tried CSDEVCTRL, however, it cannot lock my device after the set time when i mantual turn it off. and the "lock on wakeup" is a mess when someone call me or the reminder pop out.
anyone know how to auto lock my device after a set time even i turn it off before thetime due?
by the way, Windows mobile 6.5 is used
Software SensorLock v0.4.
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable=1
sam1st said:
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable=1
Click to expand...
Click to collapse
thank you,
this is exactly what i want,
have a nice one
sam1st said:
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable=1
Click to expand...
Click to collapse
sorry for this question
but witch program i need to do this??
where i can do this?
sam1st said:
HKCU/ControlPanel/BackLight/AutoDeviceLockEnable=1
Click to expand...
Click to collapse
I changed the registry.
When the backlight is off and the screen is lock, the backlight does not go on when I unlock the screen at this moment.
Have to press the power button to turn the screen off and on again for the backlight to work properly.
Is there a resolution on this?
Thank you.
tinyau01 said:
I changed the registry.
When the backlight is off and the screen is lock, the backlight does not go on when I unlock the screen at this moment.
Have to press the power button to turn the screen off and on again for the backlight to work properly.
Is there a resolution on this?
Thank you.
Click to expand...
Click to collapse
I also got this problem, waitting the resolution.
flipflop2008 said:
I also got this problem, waitting the resolution.
Click to expand...
Click to collapse
anyone solve this problem?
tinyau01 said:
I changed the registry.
When the backlight is off and the screen is lock, the backlight does not go on when I unlock the screen at this moment.
Have to press the power button to turn the screen off and on again for the backlight to work properly.
Is there a resolution on this?
Thank you.
Click to expand...
Click to collapse
It looks that there is a problem with Blackstone Roms, all of them have this problem. I always used autolock and my solution was to disable the Dim timer on the Power settings.
This way the phone will only locks when it powers off.
I'm not facing this issue with Duttys 6.5 Leo Test 2
hmoroni said:
I'm not facing this issue with Duttys 6.5 Leo Test 2
Click to expand...
Click to collapse
I can confirm that! I don't have the issue with that ROM.
But:
When i press the CallEnd button for some seconds to lock the screen manually then there seems to be a kind of a delay until the lock screen appears.
is there a way to get the lock screen immediately or is it a general winmobile issue?
I don't know why, but nobody mentioned S2U2. Works perfectly on all Dutty ROM's and does all the things needed to solve this problem.
I set it to "Lock when device wakes up". Additionally I chose not to use S2A (Slide to Answer) in favor of the default answering slider which works like a charm for me. When somebody calls me S2U2 automatically unlocks and I have full access to the answering buttons.
Further I disabled the automatic power off by S2U2 and let WinMo do this in order to prevent conflicts between the different power managments.
namelessrabbit said:
I don't know why, but nobody mentioned S2U2. Works perfectly on all Dutty ROM's and does all the things needed to solve this problem.
I set it to "Lock when device wakes up". Additionally I chose not to use S2A (Slide to Answer) in favor of the default answering slider which works like a charm for me. When somebody calls me S2U2 automatically unlocks and I have full access to the answering buttons.
Further I disabled the automatic power off by S2U2 and let WinMo do this in order to prevent conflicts between the different power managments.
Click to expand...
Click to collapse
Hi! Personal i don't like S2U2 too much tho thx for your hint.
I want the wm6.5 implemented lock screen but with fast reaction.
Hi All
I would like to get your opinion and solution (if exist).
I configured company exchange mail on the HTC Desire, the exchange policy requires password lock which configured to maxim time 30 mins.
The problem is:
1. When i press on the power button to lock the screen, it locks the screen (turning off the screen) , but when i press again on power button to open the screen, it always asking for password (even after 1 minute).
In addition when i am making calls and finish the call by pressing on the "RED" button, it locks the phone again.
The question is:
If there any way i can disable the lock screen with password, or at least lock the screen for 30 mins without asking for password, only if it's idle for 30 mins then ask for password.
I read some stuff around and some suggest lockscreen disabler from andoroid market, for some reason i can not find it in the store.
Thanks for the assistance.
I would like to know this too. I configured my work exchange account then got so fed up with that poxy lock I removed the account after 10 mins!
i think i saw somewhere this, the solution would be installing app called lockpick or something like that. search this forum, about exact same issue, you will find it cheers
edit: http://forum.xda-developers.com/showthread.php?p=6032322
I use Autolock for this. Search for it on the Market.
patasenko said:
i think i saw somewhere this, the solution would be installing app called lockpick or something like that. search this forum, about exact same issue, you will find it cheers
edit: http://forum.xda-developers.com/showthread.php?p=6032322
Click to expand...
Click to collapse
Thanks a lot, the Lock Picker is working properly.
lgrangeia said:
I use Autolock for this. Search for it on the Market.
Click to expand...
Click to collapse
I am using the Autolock too , in order to lock the device after some time. But the strange issue now, that when the phone is locked it asking to draw the patern instead of password as requested before ( Lock Picker is disabled the Exchange password).
The question where i can change the pattern ( Settings -> Security) i have change password only but not the pattern.
Thanks for the assistance.
i need something to disable the screen lock. these only disable the locking code thing!
Any ideas?!
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk
Hi guys , do u know if this app consumes how much battery ??
In addition when i am making calls and finish the call by pressing on the "RED" button, it locks the phone again.
Click to expand...
Click to collapse
Yep, and that annoys me also without Exchange account enabled (pattern instead of password in this case).
This might help someone. I use Lock Delay because I wanted the screen to go off and place the device in standby after 2 mins but I didn't want the lock to enable on doing so every 2 mins.
With this app, I set the phone to go into standby every 2 mins but the lock/pattern to appear only after 10 mins in idle. It works perfectly.
Secondly, when the screen is off but not locked for those 10 mins, I can bring the screen back on by pressing any key.
-----------------------------------
- Sent via my HTC Desire -