Related
using att 8525...ROM upgrade seemed to have gone ok, but now my keyboard second row symbols have been remapped.
Example: My "@" symbol over the letter "E" now produces a "?" instead of a "@"
how do I remap my 8525 keyboard?
jmfcst said:
using att 8525...ROM upgrade seemed to have gone ok, but now my keyboard second row symbols have been remapped.
Example: My "@" symbol over the letter "E" now produces a "?" instead of a "@"
how do I remap my 8525 keyboard?
Click to expand...
Click to collapse
use Schap's Advanced Config (should be installed) to switch the Keyboard layout to "AT&T/Cingular" or just "Cingular" if its an older version of the program.
jmfcst said:
using att 8525...ROM upgrade seemed to have gone ok, but now my keyboard second row symbols have been remapped.
Example: My "@" symbol over the letter "E" now produces a "?" instead of a "@"
how do I remap my 8525 keyboard?
Click to expand...
Click to collapse
Try using Schaps Advanced Config.
You can either search it in the forum or in the FTP.
After you get the cab, before installing it, make sure you have DOT_NET_COMPACT_FRAME_WORK 2.0 or 3.5 installed and then install Schaps Advanced Config.
Dependig on the version you install look for the TAB Miscellaneous or search for Keyboard Settings and change the language to the desired one.
Cheers.
wow, kind of strange...I went into the registry and did the following update:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)
then I soft rebooted and everything was fine.
Then I saw the replies to this thread and opened Schap's Advanced Config, expecting it already to be set to "Cingular" based upon my above change to the Registry, but it had the keyborad layout as "Chinese", so I reset it to "Cingular".
I'm happy, but confused.
I have an HTC Touch Pro2 from T-Mobile running WinMo 6.1. It seems that under Settings, Personal, Input, the "Word Completion" tab is missing between "Input Method" and "Options" that was there on my previous WinMo 5 device. Is this feature missing from WinMo 6.1 in general, or has it been disabled by T-Mo? if it's been disabled, is there a way to enable it?
yeah it's missing in my Tmo TP2 too. I do miss the auto correction feature that was on that tab.
edit : I did not reading the message right sorry
mloamiller said:
I have an HTC Touch Pro2 from T-Mobile running WinMo 6.1. It seems that under Settings, Personal, Input, the "Word Completion" tab is missing between "Input Method" and "Options" that was there on my previous WinMo 5 device. Is this feature missing from WinMo 6.1 in general, or has it been disabled by T-Mo? if it's been disabled, is there a way to enable it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=4014852&postcount=6
tkalli said:
http://forum.xda-developers.com/showpost.php?p=4014852&postcount=6
Click to expand...
Click to collapse
now will that enable the tab to change the settings in the Input settings or just enable the options? I want the word completion, but not the word suggestion.
tkali is right- they are one and the same. Word completion and word correction are both linked to disabling T9
http://www.fuzemobility.com/autocorrect-and-autocompletion-solved/
Quick question about the reg edit. I havetriededitthe first valeu but it tells me access is denied. Is there something I am missing?
I made the registry edits mentioned in the other thread (copied below for reference) but I still don't have the missing Word Completion tab even after a soft reset.
From the other thread referenced above:
Diable eT9. Enable COMP IME. This is a registry edit.
Go to: HKLM\System\CurrentControlSet\Control\layouts\e001 0409
Edit: Ime File = \Windows\compime.dll
Layout Text = COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
That will bring you back to the good old word suggestion and dynamic auto completion.
yeah unfortunately it doesn't bring back the word completion tab, which i was hoping.
What exactly does it do then? I didn't notice any change.
it should enable it so that when you're typing, it'll give you 4 (changeable) suggested words as well as auto-correct some words. (type comming & it'll change to coming)
I like the auto-correct feature on the Tilt/MDA because you could type contractions without the apostrophe & the phone would auto-correct it for you. I hate the word suggestion & always had that turned off.
I don't know why they'd take this tab & feature out of the input settings/phone.
I'm still not getting any suggested words; I used to get them when using the Letter Recognizer (WinMo 5), but I don't get them with that or the QWERTY. I may have inadvertently set the # of words to suggest to 0; do you happen to know the registry setting for that?
I have a friend who has a WinMo 6.1 phone, but not from T-Mobile, and the Word Suggestion tab is visible. Seems there must be a setting for that somewhere that T-Mo disabled for some reason.
Maybe I'm misunderstanding your question, but I got Word Completion/Suggestion working just fine on my T-Mo Touch Pro 2 by pressing the XT9 button on the soft keyboard
Doesn't work while using the hardware keyboard though, which may be what you're asking about
yeah, we're talking about the function working with the hardware keyboard
Gotcha! Ignore me then
OK got the word completion to work but now I have no "space" instead I have ".com" there. Anyone have this problem?...Thanks
Does anyone have the factory settings?
I was actually referring to the on-screen input methods, not the slide-out keyboard. On my previous WinMo 5 device, the suggested words appeared regardless of which method I used - Letter Recognizer, QWERTY, etc. That's what was I looking for.
I also discovered what I did wrong - I had an "n" instead of an "m" in the name of the DLL. I corrected that, did a soft-reset and Viola! I have the suggested words now. It's hard to distinguish an "n" and "m" on that small screen.
The tab is still missing under Settings, Input - I would still like to have that visible if anyone figures out how to enable it.
Thanks for the help.
does anyone have the qwerty reg settings, now i no longer have that function all i have is regular keyboard or when qwerty is selected i have just numbers...thanks
Problem solved T-mo Word completion/no space bar
OK here is what I did on my T-mobile TP2 to get word completion working with the space bar (Mine (space bar) disappeared after I did the reg hack) I put these settings in and now I have word completion and the space bar back.
I went to
HKLM\System\CurrentControlSet\Control\layouts\e001 0409
Edit: Ime File = \Windows\compime.dll
Layout Text = eT9 IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
Now on MY T-mo TP2 I have word Comp and a space bar also. Hope this helps someone...Tj
@TrekkerJmm does SYM on your hardware keyboard still work? (ALT + ,)
Hi all
I've come over from the TP to the TP2 and I'm really missing the TAB key on the keyboard. Used it a bit. Is there anyway to map another key (maybe via FN) to perform the TAB function?
If you are just looking to move your text cursor between fields, the directional arrow buttons will do the job.
ohyeahar said:
If you are just looking to move your text cursor between fields, the directional arrow buttons will do the job.
Click to expand...
Click to collapse
I must maybe try that again... I've tried it before but it didn't always work.
Nope it doesn't work... problem is that when I'm in a block that has figures in it it will go forward in the same block instead of going to the next block. Anyone else with same other ideas?
take a look here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Rhodium/ChangingKeyboardLayout
edit the file eT9.Rhodium.409.kmap.txt this way:
change this row:
{T T T T T 0x04}
in this row:
{T T T 0x09 0x09 0x04}
save the file as unicode and copy it to windows folder
now for tab key just type FN + T
Think I'm missing something. I've looked at the registry key and it says I'm using: eT9.Rhodium.www.kmap.txt but when I change this file absolutely nothing happens?? Should I still be chaning: eT9.Rhodium.409.kmap.txt although this is not the one according to my registry?
i did this mod time ago, but in my old touch pro the tab key did change between input fields, in touch pro 2 it only add a bounch of spaces (like when in text insertion) and doesn't switch fields...
is there a way to change the behaviour?
Need a Tab Button on touch pro2...
I have the same problem i need a tab button. I read in another thread how they remapped the Fn+t to = the tab but i dont think it is for the touch pro2
when i load the (eT9.Rhodium.www.kmap.txt) file nothing happeans. i did read in the text you have to change it to a unicode file but i couldn't figure out how to do that. Also many people have replied that you can use the arrow keys but as stated by "pieterbotes" if you are in a field for Example "typing in your name" you cannot move to another field for example " your password" with the arrow keys it the same thing on a Pc Keyboard only a tab button will allow you to do that. So if any of the great minds on this site have a answer it would be greatly appricated.
And does anyone agree that fn+q would be better than fn+t since the q is close to where the tab would be?
Thank You.
Duane
Don't know if you're interested, but i've found that Keyboard Config is pretty useful for stuff like this.
Sublimedelta9 said:
Don't know if you're interested, but i've found that Keyboard Config is pretty useful for stuff like this.
Click to expand...
Click to collapse
thanks...using your program fixed the problem for me...setting as tab fn+t using your program make the tab work as it should, changing beetween fields.
airon11 said:
thanks...using your program fixed the problem for me...setting as tab fn+t using your program make the tab work as it should, changing beetween fields.
Click to expand...
Click to collapse
Glad it worked for you, but credit should go to Tarkim; It's his creation.
Sublimedelta9 said:
Glad it worked for you, but credit should go to Tarkim; It's his creation.
Click to expand...
Click to collapse
thanks anyway for pointing me to it..
anyway reading the thread i don't know why i was sure you was the programmer..maybe i misread a post..
=)
airon11 said:
thanks...using your program fixed the problem for me...setting as tab fn+t using your program make the tab work as it should, changing beetween fields.
Click to expand...
Click to collapse
Could you please copy and paste here the eT9.Rhodium.409.kmap.txt file content?
This .txt file is located in /Windows folder... check also if it exist another eT9...txt file...
I'm interested notably in this row: {T T T x x 0x04} (what's instead X?)
THANK YOU SO MUCH!!
it' {T T T 0x09 0x09 0x04}
but i edited it.
in that way you have the tab key but it add spaces and does not change fields..
using the key remapper instead and sendink the keystroke to the os works as expected...
That program works brilliant. Thanks.
Has anyone been successful with this? No amount of hacking is allowing me to change the soft key for the touchflo 3d home page section...
I have used Advance Config, TouchFlo Detacher and Registry editing:
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeLSKText = Text on softkey
HomeLSKPath = Path to program to run (or blank for default)
HKEY_LOCAL_MACHINE\Software\HTC\Manila
HomeRSKText = Text on softkey
HomeRSKPath = Path to program to run (or blank for default)
My result:
The text changes but the button will not launch program.
Search for a way to have it work leads me to the same result. could it be the version of manila?
my touch pro 2 is sprint version. I read one other forum where a tmobile version could not get this working either with my same result.
any info would be helpful. thanks
I used only the Advance Config
it works fine with me
Since I just cleared my storage (cause I manage to **** up the touch flo and have two settings and no calendar tab), I will try advance config first without touching the registry.
Ok I just realized Advanced Config does not remap the softkey for the TouchFLO 3D shell. It remaps the regular today screen's softkey. Unless I'm doing something wrong, here's what I did.
1. open advance config
2. press menu (right soft key)
3. clicked "more settings"
4. clicked "key mapping"
5. key mapping configuration for path and text shows up, did the changes.
of course since this only remaps the regular screen's softkey, the change does not show on the touch flo 3d home page soft key (where camera is).
I had a similar issue trying to set up TFDetacher and my Sprint TP2. I ended up hard resetting because it was jacked up. I haven't had a chance to try to fix yet.
I had the same issue, but only with the left softkey. Till now I found no solution.
Baluliloe said:
I had the same issue, but only with the left softkey. Till now I found no solution.
Click to expand...
Click to collapse
Problem is that (at least on my TMO unit, but I've seen others report the same thing)
HomeLSKText - Changes Text on the left softkey
HomeRSKText - Changes Text on the right softkey
HomeLSKPath - Doesn't appear to do anything!
HomeRSKPath - Changes application launched by LEFT softkey (note - that is NOT a typo!)
i.e - it's easy to change the left softkey on the Manilla home page, but so far I've not found out how to change the right softkey - though I've seen screen caps here that show it changed, so it is clearly possible.
-Steve
On the sprint version there is no fix as of yet you can change the name on the key, but the activation is still contacts, this is with reg edits and programs i have tried.
Keyswop - changes the phone or Lock softkey.... still trying to find something to change the Touchflo 3d Icons so I can attach different movie players and such to the interface though.
Styg
http://mobisapienz.com/index.php?option=com_jdownloads&Itemid=82&task=view.download&cid=57
yes, that was my other ultimate goal was to make those other touchflo tabs into buttons rather then 'tabs', that opened programs. personally I don't want ANY tabs, and just keep the touchflo on the home page, but disabling the tabs also disable their overlay features (hence loading from quick programs doesn't load the touchflo version like calendars).
Think the answer for remapping the soft keys in Manila TF3d home are as follows (using windows calendar as an example):
Within the registry.
1) HKLM\software\HTC\Manila
Within that folder see if the following string exists and change the value - if it doesn't then create it:
Value Name "HomeLSKArguments "
Value Data "-manila off"
(without the quotes)
Then next string
Value Name "HomeLSKPath"
Value Data "\windows\calendar.exe"
Then next string
Value Name "HomeLSKText"
Value Data "Calendar"
(Don't enter the quotes above)
This works for me and remaps the left soft key to open the normal windows calendar program. Also works with Right Soft Key simply by changing LSK to RSK - (got my RSK taking me straight to Comm Manager)
Good luck
Barney
Barneyabz said:
Think the answer for remapping the soft keys in Manila TF3d home are as follows (using windows calendar as an example):
Within the registry.
1) HKLM\software\HTC\Manila
Within that folder see if the following string exists and change the value - if it doesn't then create it:
Value Name "HomeLSKArguments "
Value Data "-manila off"
(without the quotes)
Then next string
Value Name "HomeLSKPath"
Value Data "\windows\calendar.exe"
Then next string
Value Name "HomeLSKText"
Value Data "Calendar"
(Don't enter the quotes above)
This works for me and remaps the left soft key to open the normal windows calendar program. Also works with Right Soft Key simply by changing LSK to RSK - (got my RSK taking me straight to Comm Manager)
Good luck
Barney
Click to expand...
Click to collapse
thanks for the input. at least now I know the arguments path is probably important. However, it still does not work. same results, text changes, but does not operate. =(
nope did not work 4 me, maybe we can have other sprint users try this out to see if they are successful.Are you sure this is step by step in how you accomplished this?
I think I may have figured it out or at least am on to something...
I remapped my LEFT softkey to open Windows Media Player.
HomeLSKArguments:
HomeLSKPath:
HomeLSKText:Media Player
HomeRSKArguments:
HomeRSKPath:\Windows\wmplayer.exe
HomeRSKText
I have a brand new Sprint TP2.
dshosu said:
I think I may have figured it out or at least am on to something...
I remapped my LEFT softkey to open Windows Media Player.
HomeLSKArguments:-manila off
HomeLSKPath:
HomeLSKText:Media Player
HomeRSKArguments:
HomeRSKPath:\Windows\wmplayer.exe
HomeRSKText
I have a brand new Sprint TP2.
Click to expand...
Click to collapse
I believe you figured it out. Arguments is not needed though. -manila off doesn't do anything.
So RSKPath points to left... that's really annoying. I remember reading this somewhere, but it was so ridiculous that I never tried it. LSKPath doesn't do anything though. =( Definitely a bug somewhere
yeah the left key can be re-mapped, its the right key that activates contacts and has yet to be changed.
mankoorb said:
yeah the left key can be re-mapped, its the right key that activates contacts and has yet to be changed.
Click to expand...
Click to collapse
Ahh bummer. I though I figured something out.
But just to be clear:
Only Sprint customers are having problems with remapping the softkeys, and it's only the right softkey.
The Verizon Touch Pro2 doesn't have to reverse the RSK/LSK paths AND can remap the RSK.
Maybe someone should re-title this as a Sprint only problem?
I've also read some tmoble have this problem too.
just curious, what version of manila do people have? (listed in the same registry location).
mine is 2.1.38416.1 and I am with Sprint.
@ dshosu: idk about tmobile but sprint versions has this issue, verizon's dont.
@ tonefour: i have the same manila version.
Mine is exactly the same, I just got mine yesterday from Sprint (2.1.38416.1)
occasionally the built in keyboard shows me a different than expected keyboard. For example, durring txt messages, it would show the phone keypad "with the 1-9, P, w keys" or it would show the internet one "with .com button". I tryed looking through the registry for it, but its a mess tryn to find the key that was changed. i have the touch input v2.0 (build 35555) on the AT&T rom.
If anyone else has had this problem and knows how to solve it, the help would be amazing.
p.s. on my previous phone, I had the VITO Zoomboard, but i like the way this new keyboard is in how it changes..but not when it changes to something that isn't appropriate for the given event
Did you install the classic word completion or word correction cab? If so,
GoodThings2Life said:
When enabling Classic Word Correction, Opera users may experience an issue in which the soft keyboard gets stuck in web or numeric mode. To avoid/correct this, click on the web page instead of the address bar before exiting Opera.
Click to expand...
Click to collapse
I installed the disable xt9 file which changes registry values?
Just now I used the resco registry explorer to extract my reg files and found which keys changed:
=== normal keyboard ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000000
=== web keyboard ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000006
=== numeric keypad ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000006
now I gata find a program which will make an exe or lnk to change that value of the reg
I have the exact same issue. The phone seems to get stuck on the number keypad with the W and P and will not go back to the full qwerty.
Soft resets do nothing to reset keyboard. I did the following edits to get word suggestion:
Go to: HKLM\System\CurrentControlSet\Control\layouts\e001 0409
Edit: Ime File = \Windows\compime.dll
Layout Text = COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
Otherwise I have done no registry edits except removing proxy info for Opera to get it to work on Rogers.
This is most annoying so any suggestions or help would be appreciated.
I have tried using opera page before exiting but it still comes up as a number pad.
Applies to any HTC Touch Input 2.0 keyboard
baudac said:
Did you install the classic word completion or word correction cab? If so,
Click to expand...
Click to collapse
Thanks for this ... you really helped me save a lot of time!
I find that it will also flip to this input style when trying to add a contact. Once it does this I then have to go and start opera, touch the address bar and the input changes back to qwerty. Then I can exit opera. Its kind of a pain but at least I know of the work around.
thanks for the opera info - I did not install any completion cab, but this did fix my keyboard issue.
I just got this problem today. I have yet to be able to change it back.
I can tell you that this occurred in the Windows Edit Contacts menu (that is to say, go to HTC's "Edit Contacts" and select "More").
At first it gave me a simple numbers and arrow keys only keypad. I soft reset and it changed nothing. I then decided to retrace my steps to try to fix it, so I went back to the edit contacts screen and fiddled around, very shortly it switched to the keyboard as described by the OP. Numeric keys, parenthesis, a 'P' and a 'W', etc... stuff used in phone numbers, I suppose. I haven't been able to get it back to a full keyboard, yet. I've messed around with the keyboard options, switched to and back from other keyboard choices and got nothing.
Anyone else want to investigate this further with us?
xperia
zyphuris55 said:
I installed the disable xt9 file which changes registry values?
Just now I used the resco registry explorer to extract my reg files and found which keys changed:
=== normal keyboard ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000000
=== web keyboard ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000006
=== numeric keypad ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000006
now I gata find a program which will make an exe or lnk to change that value of the reg
Click to expand...
Click to collapse
This worked for me.. The opera trick did not
SlyMaelstrom said:
I just got this problem today. I have yet to be able to change it back.
I can tell you that this occurred in the Windows Edit Contacts menu (that is to say, go to HTC's "Edit Contacts" and select "More").
At first it gave me a simple numbers and arrow keys only keypad. I soft reset and it changed nothing. I then decided to retrace my steps to try to fix it, so I went back to the edit contacts screen and fiddled around, very shortly it switched to the keyboard as described by the OP. Numeric keys, parenthesis, a 'P' and a 'W', etc... stuff used in phone numbers, I suppose. I haven't been able to get it back to a full keyboard, yet. I've messed around with the keyboard options, switched to and back from other keyboard choices and got nothing.Anyone else want to investigate this further with us?
Click to expand...
Click to collapse
Same problem for me, so I did the Opera method.
It definitely originated (for me) in "edit contacts".
I used the stock Opera (9?). I did try to just tap the google search bar with no luck.
Just click on the address bar after you start the browser and it will allow you to switch.
*Non-registry changin' noob method*