Hi, I'm new to this forum and I have been reading extensively about the issue I'm having but I have been unable to find a solution, the last thread on the subject was more that 6 months ago...
I recently upgraded my T-Mobile Dash to WM6.1 by the Kavana version and it worked great, I am really happy with the change. However, I can get the Qwerty keyboard to work for texting, I have the multi-tap which is extremely unconfortable. Does anyone know how I can set it up to QWERTY?
Thanks in advance...
maittebenitez said:
Hi, I'm new to this forum and I have been reading extensively about the issue I'm having but I have been unable to find a solution, the last thread on the subject was more that 6 months ago...
I recently upgraded my T-Mobile Dash to WM6.1 by the Kavana version and it worked great, I am really happy with the change. However, I can get the Qwerty keyboard to work for texting, I have the multi-tap which is extremely unconfortable. Does anyone know how I can set it up to QWERTY?
Thanks in advance...
Click to expand...
Click to collapse
In a text input box FN + SPACE choose ABC
The Fn key does not work...
maittebenitez said:
The Fn key does not work...
Click to expand...
Click to collapse
Be sure that you have the proper keymapping. Aside from that, the Fn then spacebar is about it.
maittebenitez said:
The Fn key does not work...
Click to expand...
Click to collapse
Install the correct Keymap in sig reboot and follow previous instructions, if it doesn't work then your stuck, as FN + SPACE then choose ABC is how it's done.
I notice that your previous post on another thread for the way of doing it was incorrect follow instructions to a T
wont xt9 fix it?
I would love to have a quick solution, Im seriously considering flashing my phone again, I have done the remapping several times and I still have the same problem
please explain.
stylez said:
Install the correct Keymap in sig reboot and follow previous instructions, if it doesn't work then your stuck, as FN + SPACE then choose ABC is how it's done.
I notice that your previous post on another thread for the way of doing it was incorrect follow instructions to a T
Click to expand...
Click to collapse
Hi, I l'm new in this forum but I used previously my brothers account, so Hi to everybody.
I'm in the same situation as I tried already even the 6.5 rom and the alt key is still disabled, and as a consecuence, the abc mode cannot be used.
Can you please explain what Sig reboot means and how its done? Thanks in advance and sorry for my ignorance.
andypol said:
Hi, I l'm new in this forum but I used previously my brothers account, so Hi to everybody.
I'm in the same situation as I tried already even the 6.5 rom and the alt key is still disabled, and as a consecuence, the abc mode cannot be used.
Can you please explain what Sig reboot means and how its done? Thanks in advance and sorry for my ignorance.
Click to expand...
Click to collapse
It's a way old post sig means signature lower part of my posts "and has changed", all keymap file held in the sticky, try installing the one for your region and soft re-seting. If no joy then you will have to work out if your key is broke? Generally by flashing stock ROM.
Good luck.
Related
This will allow you to type normally while in a call, without the numbers being locked on in other applications. I could not find this anywhere so I did so tinkering and found this key to be the problem. I saw many other people that had the same problem here is the fix. Quite simple.
Just change the following key.
\ HKLM\Software\OEM\PhoneSetting\
“enablekeyboardmaping” to 1
Update. this fix is not currently working
Wow nice tips!
Was wondering how to get rid of this in my rom.
This was very helpfull
EDIT: Didn't worked for me. Tried some different typo but still no luck :/
fun_key said:
Wow nice tips!
Was wondering how to get rid of this in my rom.
This was very helpfull
Click to expand...
Click to collapse
no problem, thought I had to share it would only be fair.
thepcguy85 said:
no problem, thought I had to share it would only be fair.
Click to expand...
Click to collapse
Can you maybe elaborate a bit more you tweak? I am maybe missing something
Nope, this is not working
Either 1 or 0, DWORD value
oh man.. are we close to finding a fix?!?
this worked for me. I am running
WM6 5.2.1620 build 18125.0.4.2
ROM 3.61.502.1
the AT&T version
after I changed this it worked right away no reset needed
post a cab please
i dont see this in the reg at all.....
Might have to create it.
It's already built into the ROM im using so I can't check.
before i changed this key it did not work after i changed it it did. so i just changed it back and the numbers didnt come up. i will post the other keyboard cab i found as soon as i can.
i thought i had it
i will also try setting to 0 and soft rebooting just to make sure.
mcorrie1121 said:
Might have to create it.
It's already built into the ROM im using so I can't check.
Click to expand...
Click to collapse
Can you re-confirm the key, sans typos (no offence thepcguy85 )
after reboot the keys did not revert back. so now i am puzzled, l also loaded this cab with keyboard mapping. please note this cab is only for the AT&T 8525. but i am not sure if it was this cab or not.
we may be able to pull the setting out of this cab if it is the fix.
The cab is the same old 8525 keyboard mapping fix.
The key referenced in the OP has typos at the very least.
The ROM referenced in post #7 is the latest AT&T ROM, in which the problem has been fixed.
vp3G said:
The cab is the same old 8525 keyboard mapping fix.
The key referenced in the OP has typos at the very least.
The ROM referenced in post #7 is the latest AT&T ROM, in which the problem has been fixed.
Click to expand...
Click to collapse
it was not working when i first Flashed the ROM this is however to the best of my knowledge.
could you be of help vp3g?
thepcguy85 said:
it was not working when i first Flashed the ROM this is however to the best of my knowledge.
could you be of help vp3g?
Click to expand...
Click to collapse
Many many people have asked him what he did in his 3.61 rom thread. You may read his full response there, but, in short, he cannot replicate it.
I checked to see if this would work but my OEM/PhoneSettings Doesn't even have registry key as An Option.
fun_key said:
Wow nice tips!
Was wondering how to get rid of this in my rom.
This was very helpfull
EDIT: Didn't worked for me. Tried some different typo but still no luck :/
Click to expand...
Click to collapse
If your saying This , Then that means it has more to Do with Just the Build. I thought it Was the Build that The vp3G ROM was using that corrected the Error but if Fun_Key ROM is using the same Build than It's more than Just the Build .I"ll try Combing Over the Registry Keys in the vp3G ROM and then maybe get some Answers. I"m sure it's been done But what else can we do right now....
EQUiLiiBRiUM said:
I checked to see if this would work but my OEM/PhoneSettings Doesn't even have registry key as An Option.
If your saying This , Then that means it has more to Do with Just the Build. I thought it Was the Build that The vp3G ROM was using that corrected the Error but if Fun_Key ROM is using the same Build than It's more than Just the Build .I"ll try Combing Over the Registry Keys in the vp3G ROM and then maybe get some Answers. I"m sure it's been done But what else can we do right now....
Click to expand...
Click to collapse
Right now...load down vp3G's ROM and try and pull out as much of the AT&T as I can!
i dont think funkeys is based on 3.61 cuz i was diggin thru the reg and found 3.60 as a ver not 3.61.....hmm
jakeypoo said:
i dont think funkeys is based on 3.61 cuz i was diggin thru the reg and found 3.60 as a ver not 3.61.....hmm
Click to expand...
Click to collapse
I made some mix, but most part should come of 3.61. When I first built my rom there were some issue that denied me to use a full 3.61 through pandora.
But this is in fact a good hint which could allow me to troubleshoot the key mapping issue.
Hi all,
I've upgraded my HTC hermes to this *nice* ROM. I'm having some issues with BT. It seems configuration stay in a read only mode. Every time I change the config (for example "enable file sharing") , next time I enable BT it's not keeping the options...For example..every time I start tomtom I have to type the security code for the BT receiver. Everytime...it just loose it all the times. Is there a workaround?
anyone using Scap's rom is having this issue?
Sky1979 said:
anyone using Scap's rom is having this issue?
Click to expand...
Click to collapse
yeah this is generally known. I had a problem too with BT, so I reflashed to the org. HTC WM6.0 ROM.There isn't a fix. Use a later version of Schaps ROM.
Thereby you already ask the same question here Like my experience is there too. Why start a new thread again?
Is this a known issue? I've search but found nothing on this...I don't want to upgrade to latest Schap's rom cause there is just 2 supported languages...
Sky1979 said:
Is this a known issue? I've search but found nothing on this...I don't want to upgrade to latest Schap's rom cause there is just 2 supported languages...
Click to expand...
Click to collapse
Read the thread you post your message before about the 3.54b ROM.
No man you failed to read my post. I don't have of these issues. I don't have any dutch version. I don't get any bluetooth disconnection. I don't have any crash activating BT or deactivating bt. I work perfectly BUT BT pairing doesn't keep the passkey! So everytime I have to manually provide it...
Sky1979 said:
I work perfectly BUT BT pairing doesn't keep the passkey! So everytime I have to manually provide it...
Click to expand...
Click to collapse
No man. It doesn't work *perfectly* It doesn't keep the password!
Solution. Upgrade to another version 4.xx Schaps ROM
Schaps probely reads these threads
hendrixus said:
No man. It doesn't work *perfectly* It doesn't keep the password!
Solution. Upgrade to another version 4.xx Schaps ROM
Schaps probely reads these threads
Click to expand...
Click to collapse
OMG. Seems you don't understand. Compared to the issues posted in that thread, bt for me is working. NO crash, file transfer it's ok and so on...Do you see any user reporting an issue for rom loosing the passkey? NO
Sky1979 said:
OMG. Seems you don't understand. Compared to the issues posted in that thread, bt for me is working. NO crash, file transfer it's ok and so on...Do you see any user reporting an issue for rom loosing the passkey? NO
Click to expand...
Click to collapse
I understand perfectly what the problem is. I don't understand why you have to start another thread if you have ask that same question in 2 different relevant threads, in English and Italian.I am now gonna unsubscribe this thread now.
Lets face it, that is a very old ROM and if you can't find previous mentioned issues in the original ROM thread then you're probably not going to get any solutions. There is hardly anybody still using that ROM who still visits this forum.
Hard reset or reinstall the ROM see if that changes anything, use a newer ROM or just live with it.
hendrixus said:
I understand perfectly what the problem is. I don't understand why you have to start another thread if you have ask that same question in 2 different relevant threads, in English and Italian.I am now gonna unsubscribe this thread now.
Click to expand...
Click to collapse
Hendrixus, the problem is that you never understood what my issue was and you started with this "read this read here read that". So please don't start questioning about threads. Do you mind if I reply to one user reporting the same issue? Seen Wam? Se replied with a clear answer READING what I wrote.
Lets face it, that is a very old ROM and if you can't find previous mentioned issues in the original ROM thread then you're probably not going to get any solutions. There is hardly anybody still using that ROM who still visits this forum.
Hard reset or reinstall the ROM see if that changes anything, use a newer ROM or just live with it.
Click to expand...
Click to collapse
Very old rom? It's 1 year old and unfortunately the newest version has been translated just in EN and FR. I've also tried an hard reset but nothing...
And I found out that also some users with the mAdkoE ROM reported the same problem...
thanks anyway Wam
Hi!
Does anyone know where to find ROMS for HKC G1000 (DUAL SIM WM6)?
Many thanks!
i have one. they sent it to me coz i complained about noise being picked up by phone1. tried reflashing, but still the same problem.
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
THOMYROS said:
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
Click to expand...
Click to collapse
There is Icon with green tree in Settings menu - search for it!
Hkc G1000 hard reset
Hi,
i have the same problem, i have installed a program now the phone is blocked in the windows boot up screen.
Did you solve the problem?
Could you help me please?
Thanks
try this
3 key press together for re-start:
G2 (Dial sim card 2 key) + Camera key (on the right side, near the on/off key) + on/off key.
9rinder said:
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
Click to expand...
Click to collapse
hi, can i have it? please provide a link for download. thanks... hopefully it will solve my noise problem on phone 1. thanks...
can you post your rom versions?
mine is Under Device Information: WM6_HKC_G1000_VER_07
Hkc G1000
Thank you very much Pranix,
it worked ,
but only after take off the battery for 15 min. and with G1 button at place of G2.
I'm also interested to have the Rom (just in case
If you can provide a link it will be much appreciated.
mine is:
ROM: WM6_HKC_G1000_VER_07
RADIO: PPC_DMDC_RIL_01.01
PROTOCOL: W8.5P8.4
DRAGONFLY: DV17-MODULE-VER-07.12.2
Just a curiosity: this pda it supposed to have 64 Mb of ram, but on "about" i read only 43,74 Mb,
it's your the same or not?
Thanks again
we have the same version.
http://uploading.com/files/G05UZJ16/HKC G1000.rar.html
hopefully someone here can modify and update it to wm 6.1
how's the sound quality of your phone?
i have a problem with phone 1, it picks up alot of ambience noise.
difficult to hear the other person you're talking to.
if you put your hand over the mouthpiece, and also the earpiece, it creates a feedback sound.
no problem on phone 2.
Hkc G1000
Hi Pranix,
thanks for the rom file after i'll ask you how to flash it.
My phone works good both sims, your, sounds to be an hardware
problem, since you told that you have flashed the rom.
The set of the microphone for the sim 1 is too sensible, and when you put the hand on the micro, it cause what is called "larsen effectc", that happend when the sensibility of the microphone is too high and trigger a feedback from the earphone that cause an annoying whistle .
In an italian forum, I heard about an engineering code to write down in the
china phones with WM6, that allow you to set some hardware features
of the phone including the sound level, I don't know if this is possible also with our phone. but it worth a try.
I'll go to ask in the forum and if pertinent, i'll post you the answer.
Bye
hi,
the procedure to flash is in the rar file that i have uploaded.
just open the text file.
hope you can find some way to minimize the sensitivity of microphone setting for phone 1.
regards,
pranix
Hi Pranix,
he say that the code "engineer mode" it is available only on the china phones with the RTOS operating system, and in some motorola and Nokias,
but he say that maybe it is possible to change the parameters set on the windows registry, with a pc program like CeRegEditor.
Connect the phone to the pc, start CeRegEditor, make it read the registry, click on unlock (if not you can't save the changes), after that you have to look where are located the keys regarding the audio, and see if modifiyng the key value you can solve the problem.
I will look further if i find some else solution
good luck
i already tried editing registry however still the same.
maybe i was editing the wrong registry. hehe
i just hope that 9rinder gets to post his rom here
Pranix said:
i just hope that 9rinder gets to post his rom here
Click to expand...
Click to collapse
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
9rinder said:
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Click to expand...
Click to collapse
hi,
can you post your rom details?
i downloaded the rom, it seems your rom & my rom are the same.
i checked the date & time stamp, its identical.
i also asked my contact at hkc, still no new rom since i asked for it sometime june.
how's the audio quality on your phone 1 & phone 2?
can you hear the calling party clearly?
oxyjo said:
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
Click to expand...
Click to collapse
i've actually tried editing those registries before however still the same.
the question here is that do we have one or two mircrophones?
coz if only one, then there must be a setting somewhere to adjust phone 1 & phone 2. phone 2 sound is better than phone 1.
if two microphones, i cant find the settings as there is only one setting to tweak.
Hello. I have one of this PDa.
Mine has this ROM:
ROM version:WM6_SITRONICS_SD106_VER_05
Radio version: CYNTHIA850_DMDC_RIL_01.01
Protocol version: W8.5P8.4
Dragonfly Version:CYNTHIA850 TF-DV17-MODULE-VER-07.16 Feb 18 2008 13:02:06
Do you recommend me to update?
Is any way to "extract" its original ROM?
And is any way to "edit" any of your roms to change the language of the OS?
Thanks
== MOD EDIT ==
please check stickY
== END EDIT ==
Hi there,
First of all! Great forum! You guys have build a great community and I like it. But I hope you can help me with this. i know there are a lot of threads about this, but because all the different type of phones/android versions ect... I don't know what to do...
My question, how can I get Adroid running on my HTC Touch Pro 2 (Rhodium). I have the standart version, so not a branded one.
I've tried to install it but android won't launch. Maby one of you could create a mini tutorial or a noob tutorial, because I think there are more people like me (with less knowedge of phone tech) who want to run android on their phones. I hope you could help me!
Thanks!
Kind Regards,
Sami
http://forum.xda-developers.com/showthread.php?t=627997
Rhodium XDAndroid Rebuild .CAB WWE(02/24):
Please download the appropriate .cab for your device!
Rhodium/Touch Pro 2 Android .cab:
Rhod210 Download
Tilt2 Android .cab:
Tilt2 Download
NEW: Rhod100 fr/uk/de Android .cab:
Rhod100 Download
Instructions for .cab:
Cab is only WWE for the moment. If you still want to try this build skip down to the .rar for any other language.
If you are installing this over an old version of android, and you do not format your SD card, make sure that you at least delete data.img file from your SD card!
Copy to SD card
Install: This .cab does install directly to your SD card.
Soft Reset your handset
Run Haret from start menu and enjoy!
Click to expand...
Click to collapse
how could it be simpler?
Samich2007 said:
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
where do u dl haret.its mentioned but theres no dl link
cdiesel said:
where do u dl haret.its mentioned but theres no dl link
Click to expand...
Click to collapse
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Reefermattness said:
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Click to expand...
Click to collapse
yea thanks i did a little digging and was finally able to understand that
i dont know why posts like this are started. its so easy to use this perfect cab file! nothing else to do. if people would read just 10 minutes in other threads all questions should be answered...
how could it be simpler?
Quote:
Originally Posted by Samich2007 View Post
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
Click to expand...
Click to collapse
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
Disable your pin in WinMo as stated in my release notes.
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
as mentioned above
read the XXXX manual before posting...
edit:
ok Reefermattness was faster again
Mod Edit: Keep language clean juniors use XDA, also sometimes best to say nothing........
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Samich2007 said:
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Click to expand...
Click to collapse
next question which could be answered in minutes reading other posts...
NO there is no android version with working wifi for rhodium yet...
Oké i'm sorry... Hope it will be availible soon.
Samich2007 said:
Oké i'm sorry... Hope it will be availible soon.
Click to expand...
Click to collapse
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
I have Android installed on my phone and it works fine except one MAJOR thing. I messed up the touch screen calibration and now I can't use the touch screen in android and I cant figure out how to recal the touch screen in android.
Got it. i just deleted the ts calibration file from the android project folder and started android again.
lhwparis said:
as mentioned above
read the ****ing manual before posting...
edit:
ok Reefermattness was faster again
Click to expand...
Click to collapse
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
delete all the contents from the .cab file you downloaded, make sure your memory card has wiped any remaining files from the original download, re-install and make sure you are downloading the correct .cab file for your handset, install to memory card and try again.
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already. Stop treating people like idiots. Help them or stop reading the thread. Someone else will help them out. It's not that serious. I can tell you one problem here that I encountered was a thread would be started and trail off into someting completely different never answering the first question. After reading pages upoon pages you get nothing. Some people like myself have real lives and real jobs and dont have time to sit here and read every post. If you take it so serious maybe you should sticky an informative how to guide and maybe that will stop people from bothering you so much.
gary-09 said:
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
Click to expand...
Click to collapse
Is the folder in the root of your memory card?
dutch169 said:
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already.
Click to expand...
Click to collapse
I was actually on XDA for about 6 months, reading, before I finally decided to even MAKE an account, because I didn't want to be "That Noob". It was about another 6 months to a year before I posted anything at all. As you said yourself, most questions have already been asked a million times. This means that it is only a matter of reading, before you find someone that has asked the same question. In most cases once you find the question, and read a little further it leads you to the answer. He was smart enough to post in the correct sub-forum, which means he must have read through the forums a bit anyways. It wouldn't have taken much more work to read the top 3 sticky threads in that same sub-forum, and find the answer to the question.
I can get the whole thing to load however I cannot ever get the start screen (touch the androind to start) to ever let me touch it. The only thing that works is the keyboard input. Any suggestions?
i have been searching for thsi for a while and was certain it was somewhere on these forums but so far had no luck. a while ago i flashed a custom rom (which i cannot remember the name of) to my desire. i noticed that the stock keyboard was different to usual as it had the four cursor keys long the bottom line. does anyone know which keyboard i'm talking about, if so can you please point me in the right direction.thanks......................sudeki300
Maybe this thread helps you:
http://androidforums.com/android-applications/145794-keyboards-have-cursor-arrow-keys.html
Furthermore, i found out, that the keyboard you mean could be from gingervillian rom.
Hope, i could help you.
MatDrOiD said:
Maybe this thread helps you:
http://androidforums.com/android-applications/145794-keyboards-have-cursor-arrow-keys.html
Furthermore, i found out, that the keyboard you mean could be from gingervillian rom.
Hope, i could help you.
Click to expand...
Click to collapse
thanks alot or the reply, ill have to grab a version of the gingernillain rom and exract it to find the keyboard apk file (that's if there is one) and try to install it by itself. thanks again MatDrOiD, take care and have a great weekend................................sudeki300