Hello,
I have the HP iPAQ 214 device and i'm facing a problem: it is not booting and giving the error: "A problem occured with welcome.exe".
In fact i installed a new calendar application without doing a soft reset after. When i tried to synchronize with my PC, i couldn't do it correctly so i did a soft reset and since the device won't boot. I did already several hard resets and i'm having the same error everytime.
So could you please help me, i've only had the device for 1 week now.
Thanks for anyone trying to help.
1: It MIGHT help if you told us WHAT app in question you installed;
2: As you might also have noticed, or you were just merry-posting, this is the DIAMOND dev corner.
3: The sensible thing to do here, would be maybe to contact the application support (if it's a commercial app); freeware anyways most of the time have community-driven forums too.
Related
Hi,
I am in the process of upgrading my rom using the rom upgrade from the o2 www site.
Its been stuck on the
'checking the information on your device....Please wait.....Please do not disconnect your device from the PC or power supply until the upgrade is complete'
window for some time now. I dont know if its hung / crashed or in the middle of upgrading.
I dont want to chance it by removing the unit from the sync cradle but at the same time i dont wanna just leave it there for hours if its not doing anything.
Can anyone help ?
Steve
ps - the window I am speaking about came after the big window stating what your current rom / radio stack was and what they would be updated to giving you the option to click 'update' or 'cancel' I chose 'update' and got the message which I described earlier
Try this on a different PC...I'm assuming the phone itself is still functioning.
I had this a while back with the XDA2 and found that by attempting the upgrade on a laptop I had, it worked great without the hang.
I would then remove ASync completely (including registry items) and then reinstall it.
Cheers
Ant
I had this happen, I just shut down and restarted the installer program
Hello everyone,
My Qtek 1010 touchscreen stopped responding two days ago.
I tried everything:
- soft reset
- hard reset
- ROM burning (PPC 2002 v3.18.04 ENG, WM2003 final v4.02.04 ENG),
but nothing helped.
I managed to pass the Align Screen welcome.exe using RemoteCalibration.exe (Remote ScreenAlignment, by Code Factory) via ActiveSync, and installed PIrazu.exe (Pen Irazu) to operate the PDA using buttons, but it's very difficult. Besides, the screen is garbled on WM2003.
In rest, the PDA works perfectly.
I have read ALL your forum topics, about touchscreen problems, but I didn't find a solution.
I think it's more likely to be a hardware problem, because I don't know what else to try, via software.
If anyone have any ideea (except the ones I already tried and links to other naive topics), PLEASE reply to me. It's very important for me, and may help others too, because this problem isn't solved on this forum, as far as I saw.
Also, I need the Service Manual, to open the PDA and check the touchscreen connectors.
Thank you in advance,
Catalin Zaharia
Hi there!
I am in serious need of help with my iPAQ hx2490. Yesterday, I tried to do the
official HP ROM Update. Everything went well, up to about a point when the RUU told me that there is a connection problem with my device.
The update went to just about half way through, and I didn't touch anything, I just left the device in it's cradle.
Anyway, my problem now is, that the device won't start the OS, I can't get past the HP welcome screen. The loading bar fires up, and completes it's way to the right, but after that: NOTHING!
I have tried soft, hard and clean reset, without any help. When I do a clean reset, the display shows "Formattin PS", and the loading bar reaches the right. But after that: NOTHING again!
I tried flashing everything again, from WM 2005 first and second edition, even WM 2003. The result is always the same.
I can get it into Pre-Bootloader, normal E-Bootloader. I do get a "USB Connected" message, and I do get the following "USB" message on the screen.
Now here's the odd thing (and I do hope that all you experts are dying to solve this mystery!): when I do the update again, at either 84,1% or sometimes 85,1%, the iPAQ shuts down, and starts again. But this doesn't stop the RUU from continuing!!
I've tried everything I can, I read all the infos in the forums concerning iPAQ problems, but they're mostly concerning entering bootloader, which is NOT my problem.
Money ahead: I'll donate 10€ to the person who is able to solve this riddle!!
The money can go to either this website or the person's own PayPal account.
oh I forgot: I did try ChrisMRulz bootloader method, but I wouldn't work for me. I managed as far as the MTTY program firing up, and I do get a WCEUSB prompt, but can't enter any commands, and the nbf file doesn't get uploaded!
PROBLEM SOLVED!! Sorry.....
Can you tell us how?
Maybe it will be helpful for others that have similar problems in future.
Sure, I can do that:
I managed to flash the official International English ROM Update to my german hx2490 iPAQ. I just used the trick that you have to start the correct HPRUU.exe for your country-specific device, but just before you hit the last "Update" button, you change the .nbf file with the one you want to flash.
But you have to rename it to according filename the HPRUU.exe originally loaded,
if you don't rename it, the update utility will crash.
By doing so, I was able to flash the above mentioned ROM to my device, and after that I just flashed my country-specific ROM.
Now I'm back and running WM5.
If further explanation is needed, I'll gladly help out someone with the same problem.
Hi All,
first of all , hope to put this issue in the correct forum path....
my friend has a problem with the Pro2, as you can see by the attach , concerning the keyboard password lock.
His password doesn't works and also performing all the reset type , after the reboot the mobile starts with the keyboard locked (only emergency number is possible call).
he has reported me that at the first time, the mobile has gave to him an alphanumeric code to try to unlock the code but it doesn't solved the issue.
probably re-installing the software (6.5) the problem is solved but he doesn't want loss the date / appointments due the fact he has a doctor.
please help us.
thanks
keyboard lock
Hi again,
it's appreciated also if someone know if there's a way to perform the backup in this condition
did he never sync the phone when it was working? If he did just do a hard reset and then resync phone with the pc. You can not preform any kind of backup in windows if you can not get into windows in the first place.
--------------------------------------------------------------------------------
thanks for your post....
principal problem is that is not possible connect the mobile to pc in order to use activesync or other program due the fact the mobile is locked....and not save data has been performed before....
my problem is, every time i started or soft reset my hd mini, i will get an error message..like this one " 'BTTrayCE' is not a valid Pocket PC application " ..i think its about the bluetooth thing inside the phoone because since i get this message i can't use my bluetooth to transfer/receive files.anyone knows how to solve this?
I've had the problem as well. Probably casused by tomtom installation. Google on tomtom and the error and you may find a solution.
I did (in the end) reinstall a ROM...
yes true.i once installed tom tom,,but i didn't know its because of them..now the problem solved after i uninstall tomtom and hard reset my phone.