Hi,
I made a mistake with flashing QTEK S200 with wrong file.
Bootloader was modified. Device can not start at all.
It can not even go to bootloader screen (red-green-blue).
As consequence, no USB connection can be established.
What is the solution? I guess utilities can not be used, because they assume connection to USB, but there is no connection.
Not big deal, because it was not working well anyways, but would be interesting to know a solution in this case. Many ppl. would be happy to know how to manage this situation, I guess.
later.
Not very good news, service center said they don't know how to fix it, but kept the device to make few things with it.
Clearly, bootloader was overwritten.
Will see. Somehow they manage to identify type of rom is installed from i-mate.
So, think before you make any flashing
re: another service said they will do whatever needed, up to replacing chip with flash. I am not ready to go that far yet.
feel like i am missing something
It appears to be a real problem with flash.
No connection to computer with USB.
With power supply connected blue-green-?? screen, but I cannot connect to PC of course.
With USB cable connected blue-green-?? screen does not come up.
I figured out that pins 4 and 5 are shorten when power supply is connected. I did this with USB connection to PC, but still not connected.
For sure, USB is not functioning on device.
Will get new device, but very interested on how to repair this one. I disassembled it completely. There is no way to replace the flash chip at home, you need specific equipment and chip, of course.
What I need is surcuit diagram for S200 or similar, particularly part of diagram related to flash, radio module is not needed. Is there any possibility to get it? If I have it, I think can reprogram chip.
Thanks.
Hm. It looks like extreemly difficult to get pins layout on motherboard.
JTAG is the only solution left to access chips direct. But we need to know where JTAG pins on motherboard.
Recovered S200.
Finally very good news!
Prophet S200 was succesfully recovered with help of Arc.
He managed to discover JTAG pins, afterwards re-flashed SPL and ROM.
REALLY GOOD JOB!
Want to say special THANKS to Arc!!!
Device go live again.
Until next experiment....
But procedure to recover is in place.
Regards,
fdp24
i have a dead one too
Hi there,
I have a dead one too can you tell me how to fix it please?
dead, as in my ppc k-jam is dead
basically it hangup and i soft restarted, tried hard reset. it didnt help either. i tried restoring to factory default same thing it hangup. now it doesnt shows any signs of life . i lost my life, my buddy.
My Orange SPV M2000 will not start anymore after update. I only see Serial (on top)............ V2.07 (underneath)
I tried to update my ORANGE SPV M2000 to Tmobile's newest rom by extracting the exe. file and using maUpdateut. It started well and all of a sudden gave error "country code................"
You will not be able to fix it yourself.
Equipment and phone required physically in order to connect jtag interface and re-flash DOC.
Sorry, but this is the only solution if your bootloader is damaged.
Of course, you can try to ship it to service center. If you are lucky they will change your device. This might more simple.
Good luck.
fdp24 said:
You will not be able to fix it yourself.
Equipment and phone required physically in order to connect jtag interface and re-flash DOC.
Sorry, but this is the only solution if your bootloader is damaged.
Of course, you can try to ship it to service center. If you are lucky they will change your device. This might more simple.
Good luck.
Click to expand...
Click to collapse
I know how to open device and solder some wires to testpoints. Do you have any information where the pins are located and what software and what JTAG adapter you used? I really need to get my phone working again. It was quite expensive to purchase and to ship it to my country. Please don't destroy my hope.
hello friends,
my cousin recently buy O2 XDa ( wallaby ) for cheap one, i check on device it seems cann't boot to windows but if i hard reset and came up red, green, blue and if i press ok it came up with test all thing i confuse all the test is OK, can you all tell me how to repair the phone and waht is the problem?
thank you
dead device hope on the horizon
note my device and troubles is on the xda2
hi - i have had exactly the same issue - i have managed to reload the rom i was trying to swop and here is what i did .... it took ages and lots of patience and it is not an exact work of science but if you try my method 2 or three times it actually comes back to life ... honest !!
down load an xda2i ( yes xda2i )rom extract it using winrar or zip on your pc place dead xda2 into cradle regardless of whats on screen run himupgradenoid - the rom will run and start to load onto your device it will fail once it has failed remove xda but do nt reset - take copy of original rom which was on the device prior to your failed upgrade and extract as above. replace xda into cradle might be detected or not dont worry - run the himupgradeut from your previous working rom and wait it takes ages to connect but eventually heypresto ... you will have a working device. i know cos i done it !!! - i have not resolved all my problems yet - i still want to load latest 02 rom but even after entering correct device data into nbfs using batch file method the device crashes saying incorrect counry id. - i accidently created my problems by accidently running the wrong upgrade rom and i guess it changed somthing on my device " country code" however when i use method above to get original rom inplace and working when i extract device data into windows folder on device i still see the wwe ( world wide english) so i am still in a pickle - can anyone help me .
hello
i'm working on the project of flashing the bootloader into a totally erased and dead phone. can you send us the test points from the prophet please? and if you know their location on a WIZARD. thank you..
Somebody here Please tell what soft to use with JTAG to recover da bootloader!!!!!!!!!!!!!
get the JTAG pins for me, I will send you soft.
Wizard and Charmer pins are both needed.
hi, i've succesfully wrecked my Blueangel PH20B by flashing a modded wm6-universal-rom... i've got all the hw & sw to resurrect the phone but the jtag pins on the BA-PCB...
can someone give me a hint where i may find them? (i'm not wanting to bake the pcb as i know i'll wreck it comletley)
thanks in advance,
mario
Same problem here
Hi,
I believe I'm having the same problem
Please help me
Thax a million
so can you help me i need to write the wizard(g4) bootloader or thell me how can i do this
T-Mobile USA SDA II
Me also, i'm i need of re-writing boot-loader of T-Mobile USA SDA II
well, ok I understand that you can get the Jflash_mm working with PXA systems, you can write the definition for yourself, as for the CPU.
but I have serious doubts that inspire me to suggest you will have tiny chance to actually program a DiskOnChip Millennium series (or familiar) chip used in many platforms (actually I believe most HTC devices).
after all this means that if you are not working for (or in affiliation or partnership with) SanDisk, you are not in position to program bootloader to (not limited to) UNIVERSAL, WIZARD, PROPHET, and CHARMER (and if I remember well, BLUEANGEL and HIMALAYA) devices over JTAG.
any news............
Hi, can anyone help me and tell how to make hard reset on htc ARTE100?
Thanks
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
Thanks, it works.
Problems with Room, Bluetooth, Wifi, overall System Restore needed
Good evening .
I have been trying to solve a problem that i have with my o2 xda. The problem is that the Bluetooth device is not working, it won’t even start, and I tried to turn it on from the communications manager but nothing. I tried to turn it on from the settings/communications/Bluetooth/turn Bluetooth make it visible to devices, but also nothing.
It turns on when I soft reset the device a few times, than sometimes it comes back on with the Bluetooth on, blue light flashing, but I’m unable to get it to pair with any devices. Sometimes my laptop will pick up the signal for a few seconds, but it is not able to sink with device.
I have tried everything I could think of, even have done some hard resets but nothing.
Someone told me to do an Artemis reset. So I downloaded the 4.02 with cube zip that I found around this website, but since I have never done such a procedure, in fact this is my first time with windows mobile, so I didn’t want to mess it up.
I read in this forums that third party applications can cause sometimes this problems because of driver contamination , my device did have lots of extra apps so that could be the problem .
In any case I’m not an expert, not even close especially with this system, so any help / suggestions / diagnostics / instructions, will be greatly appreciated.
The device is an o2 xda with built in gps, running windows mobile 6.1.
ROM Athemis Touch 4.02 WWe
Rom date : 4/8/8
Radio Version : 03.08.90
Protocol Version : 4.1.13.52
CPU: OMAP850
Speed: 201MHz
Ram: 64MB
Flash Size 128Mb
Data Bus 16bits
Storage size 44.74MB
And if the best solution is to do this artemis reset, i will really appreciate some instructions on how to exactly do this task, and if there is any known issues of this procedure killing the phone? , since sometimes with this types of "resets / flashes” this type of devices sometimes dies! So any help will be appreciated.
Thanks a lot.
Hope Corporation .
hi, have anyone schema arte100 (htc p3300)? thanx.
Hi,
I tried to upgrade the ROM, unfortunately we had a power cut (sod's law haha) and my PC cut out. Now when I try to turn my XDA on (o2 exec) all I get is a dark screen with USB at the top and V1.01, I've tried the recovery tool included in the update but obviously didn't work because windows doesn't recognise the device.
Any ideas would be MASSIVELY appreciated.
btw I've tried doing a hard reset and pressing 0 but it just resets the device to the above screen =/
Thanks,
Lee
have a deep and good look at the uni's forum, search for MTTY and the mamaich method, most of the devices can be recovered, even bricked ones have been (if people that wrote were right).
good luck
Hello,
I have the HP iPAQ 214 device and i'm facing a problem: it is not booting and giving the error: "A problem occured with welcome.exe".
In fact i installed a new calendar application without doing a soft reset after. When i tried to synchronize with my PC, i couldn't do it correctly so i did a soft reset and since the device won't boot. I did already several hard resets and i'm having the same error everytime.
So could you please help me, i've only had the device for 1 week now.
Thanks for anyone trying to help.
1: It MIGHT help if you told us WHAT app in question you installed;
2: As you might also have noticed, or you were just merry-posting, this is the DIAMOND dev corner.
3: The sensible thing to do here, would be maybe to contact the application support (if it's a commercial app); freeware anyways most of the time have community-driven forums too.
Hi there!
I am in serious need of help with my iPAQ hx2490. Yesterday, I tried to do the
official HP ROM Update. Everything went well, up to about a point when the RUU told me that there is a connection problem with my device.
The update went to just about half way through, and I didn't touch anything, I just left the device in it's cradle.
Anyway, my problem now is, that the device won't start the OS, I can't get past the HP welcome screen. The loading bar fires up, and completes it's way to the right, but after that: NOTHING!
I have tried soft, hard and clean reset, without any help. When I do a clean reset, the display shows "Formattin PS", and the loading bar reaches the right. But after that: NOTHING again!
I tried flashing everything again, from WM 2005 first and second edition, even WM 2003. The result is always the same.
I can get it into Pre-Bootloader, normal E-Bootloader. I do get a "USB Connected" message, and I do get the following "USB" message on the screen.
Now here's the odd thing (and I do hope that all you experts are dying to solve this mystery!): when I do the update again, at either 84,1% or sometimes 85,1%, the iPAQ shuts down, and starts again. But this doesn't stop the RUU from continuing!!
I've tried everything I can, I read all the infos in the forums concerning iPAQ problems, but they're mostly concerning entering bootloader, which is NOT my problem.
Money ahead: I'll donate 10€ to the person who is able to solve this riddle!!
The money can go to either this website or the person's own PayPal account.
oh I forgot: I did try ChrisMRulz bootloader method, but I wouldn't work for me. I managed as far as the MTTY program firing up, and I do get a WCEUSB prompt, but can't enter any commands, and the nbf file doesn't get uploaded!
PROBLEM SOLVED!! Sorry.....
Can you tell us how?
Maybe it will be helpful for others that have similar problems in future.
Sure, I can do that:
I managed to flash the official International English ROM Update to my german hx2490 iPAQ. I just used the trick that you have to start the correct HPRUU.exe for your country-specific device, but just before you hit the last "Update" button, you change the .nbf file with the one you want to flash.
But you have to rename it to according filename the HPRUU.exe originally loaded,
if you don't rename it, the update utility will crash.
By doing so, I was able to flash the above mentioned ROM to my device, and after that I just flashed my country-specific ROM.
Now I'm back and running WM5.
If further explanation is needed, I'll gladly help out someone with the same problem.