After installation of Mapking R12 and a soft reset, the lower toolbar( phone + progamme) of HD would change from black to grey. Why?
Even a soft reset can't resolve this problem. If I uninstall the Mapking, the grey bar chnages back to black. If I just install the mapking without any soft reset, grey bar will never occur.
Any suggestion?
This is because Mapking installed a program link at Window startup directory called MapKing SMS.ink. I believe this is the software has that conflict. This software is useless for Mapking. So, you can just remove it from window startup directory and problem gone. Or you can use other software ( MemMaid ) to disable this startup program.
Thanks, it really works!
Just wonder why would a useless .ink being installed in startup??
how to get R12 working?
hi guys,
i have this problem as my R12 have this msg when i start: Device Check Failed!
Related
I'm trying to get my Orange SPV M3100 all "Greened" up. Well, going green is all the rage isn't it! I'm running WM6 (LVSW 20.03 OS Only version) and I need apply the original Tytn green skin to the Comm Manager screen and have tried to install the P_Generic_UI-GREEN_WIRELESS_MNG.CAB file that I found on here but when I try to run it (installing it to the main memory I presume?) I get the error message "Installation was unsuccesful. The program or setting cannot be installed because it does not have sufficient system permissions". Does this mean it is incompatible with WM6 (LVSW 20.03.07 ) ??
Hi friends.. I downloaded the Tom Commmanger8 from the forums but have problems installing the cab file. When I install the cab file, it fails saying -
"Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions. "
I am running the installation in normal working mode.. when the phone is started up.
Is there a separate admin mode in which I can install the cab file ??
Please help. My comm manager right now shows just one button.
Thanks.
maybe your existing comm manager is running when you try to install the new one? you can see running programs in settings/system/memory/running programs.
or you can soft reset your device and then try to install before you do anything else.
Killing Comm manager worked. It installed fine without any problems or complaints.. I now have the comm manager working fine.
But I wonder how the error it showed me and the actual problem are related..
when a program is running it "locks" some files. when you try to install a new version you try to overwrite those locked files. and you dont have the permission for this (that's why they are locked). you end the running program, and the lock is gone and you can delete/overwrite/change those files.
of course it would be possible to make a better error message like "this file is used by a running process (process_name). please end this process before trying again". but well, it's never done.
the message you got was actually very true and it allowed me to find the reason with my first guess
my solution
I had the same problem, when I tred to install it to device. But when I installe dot StorageCard, it was succesfull withou any problem. And it works,so...
The important point is here to install "8 Comm man" directly after sw-reset!!!
Then the installation works!! I tested it several times.
Hi All,
i have an QTEK 9000 device with Mobile 6.1 Prof. What I want was, that I can use the TORCH Mobile web brower. He has the engine same as Safari/IPhone. I had get the error message, that my memory is not enough, for that software?? I had disabled all the services, remove any programs, but the message comes every time. Next what I want was, that I install a lower version of the mobile system(5 or 6).
Ok I flashes down my device with the original Mobile 5. Now when the device is booting then comes the following screen: Blue background, QTEK in big white lettern, and the rom version in the right upper position in red lettern. After them the screen freeze. What I can do, is to reset(also hard). After them the device comes in the same screen????
Currently I can't installed any new bootloader or rom image....He says that I have an connection error. But the usb cable or the interface are working fine.
Has anyone an idee, how I get new imagers???
Thanks, Uwe
Hey,
I had the same problem, try this http://forum.xda-developers.com/showpost.php?p=1650610&postcount=347
Greetz
my phone run wm6.1, i downloaded dt39-UltimateROM-v3-MutliLangKB from this forum
- start Mirage_LV_1.8, click PDA button and select dt39-UltimateROM-v3-MutliLangKB
- click detect button. switch off phone to Emergency Mode, and it start flashing...
- after all, the label changed from green to blue,device reset and cannot boot to win, it halt at Samsung boot screen for long time
- i take battery out, and insert back, start again but still this problem
i try to another rom but it still this problem
was I wrong?
after flashing new rom always do hard reset. If any problem - do hard reset...
what if install harmful cab on i780 orange which lack key combinitions for Hard reset
I post here even it is to late because I had a problem of a spanish i780 that did not respond to key combintions of hard reset and boot mode. the only way to HR is by using code *2767*...... I forget it lol. But, when I installed an Arabic MUI cab on it the phone can't start so I have no way to Hard reset now since I can't access to dialer no more. and I can't flash by mirage since I can't use fn+Enter on this wm6 orange tweaked rom phone.
The only Solution for me was to download this rom ziddu.com/download/8450774/i780PDXIB1_Upgrader_VISTA.rar and I used wincotroll program from 4shared and samsung xp driver (using windows 7) then I tweaked the rom installer by draging a loop icone from wincontroll (software tweak tab) to the bottom of rom installer and clicked show then an emergency box appeared ... I checked this box (no need to check charger battery or phone connected boxs) and reset the phone or rebooted it. >>>>>>>>>>>> the phone started flashing and horaaaaay I have wm6.1 now and both key combination are working now.
I was able to flash the phone again and again testing for the best rom now I have 6.5 rom that works very very fine for me
NB: I searched the inside and outside of the Web with no results so I applied this tweak as I do to my omnia i900 when facing (incorrect software essage)
I am sure this can help someone else who still have orange wm6 useless rom on his i780.
my problem is, every time i started or soft reset my hd mini, i will get an error message..like this one " 'BTTrayCE' is not a valid Pocket PC application " ..i think its about the bluetooth thing inside the phoone because since i get this message i can't use my bluetooth to transfer/receive files.anyone knows how to solve this?
I've had the problem as well. Probably casused by tomtom installation. Google on tomtom and the error and you may find a solution.
I did (in the end) reinstall a ROM...
yes true.i once installed tom tom,,but i didn't know its because of them..now the problem solved after i uninstall tomtom and hard reset my phone.