Develop Bugs

Upgrading problem(-s)

I have problem with upgrading my PDA:
- USPL dont works for me: after switching to white screen (bootloader) RUU ends with "connection problem" error
- when I keep this (whitescreen) bootloader, then sometimes (i.e. after 10 unsuccesful tries) some RUUs see my phone and try to flash it (only succesfull are B&B v3 and DOPOD 3.7)
- I have no success with flashing from standard bootloader or running system
Does anybody have any ideas where can be a problem?

get the origanl rom for it it always work never any problems

yeah, I'm sure it works, but I'm trying to put a WM6 inside ;-)

Is it the same after hard reset?

Its the same all the time. The only way is:
1) upload original rom
2) run uspl
3) when white screen displays upload DOPODASIA_WWE_3.7.707.1_4.1.13.30_02.69.90
4) load Windows.nb from pdaviet b&b v3 (pdaviet 3.7 and touchflo don't work - only white screen after reboot is displayed)
...when some errors happens, I must begin from point 1) :-/
UPDATE: TOM_Artemis_Black&Blue_v3.7 works!
...I'm almost at the end of my way ;-)
btw: Is there any way to install InterWrite (czech localisation) ? (standart installation ends with restart during install process)

permissions problem installing tom Comm manager8

Hi friends.. I downloaded the Tom Commmanger8 from the forums but have problems installing the cab file. When I install the cab file, it fails saying -
"Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions. "
I am running the installation in normal working mode.. when the phone is started up.
Is there a separate admin mode in which I can install the cab file ??
Please help. My comm manager right now shows just one button.
Thanks.

maybe your existing comm manager is running when you try to install the new one? you can see running programs in settings/system/memory/running programs.
or you can soft reset your device and then try to install before you do anything else.

Killing Comm manager worked. It installed fine without any problems or complaints.. I now have the comm manager working fine.
But I wonder how the error it showed me and the actual problem are related..

when a program is running it "locks" some files. when you try to install a new version you try to overwrite those locked files. and you dont have the permission for this (that's why they are locked). you end the running program, and the lock is gone and you can delete/overwrite/change those files.
of course it would be possible to make a better error message like "this file is used by a running process (process_name). please end this process before trying again". but well, it's never done.
the message you got was actually very true and it allowed me to find the reason with my first guess

my solution
I had the same problem, when I tred to install it to device. But when I installe dot StorageCard, it was succesfull withou any problem. And it works,so...

The important point is here to install "8 Comm man" directly after sw-reset!!!
Then the installation works!! I tested it several times.

Htc 3350 Wm6 Rom

I have an HTC 3350 PDA,I have some questions,please answer it directly
1- what is HTC3350 called in HTC names? is it "HTC LOVE"?
2- Which ROM can i use for my device?(i love CUBE and Overclock options)
3- Can i use USPL in Windows server 2003?
4- if it's not successfull,will be fixed later by trying again?
no one answer these questions directly,and they just link to another thread,please answer my question directly.

1- what is HTC3350 called in HTC names? is it "HTC LOVE"?
yes it is HTC Love
2- Which ROM can i use for my device?(i love CUBE and Overclock options)
best according to me is artemis vanilla touch 4.02 which i have just installed
3- Can i use USPL in Windows server 2003?
I am not sure but i feel it should work
4- if it's not successfull,will be fixed later by trying again?
If it is not successful then USPL will not move ahead and hence the question does not arise

Error 274-Image File Corrupted...
I tried to Install " ARTEMIS TOUCH 4.02 WM6.1 WWE ROM Full",but in USPL Step my device display is White and after 30Second again ActiveSync Connected,then RomUpdateUtility went for Update and from 0% jump to 100% then show Error 247-Image fie Corrupted!
i reset my device and WM5 loaded again.
What is this?!
my SPL is 1.36.0000
----------------------------
HTC3350

Artemis Touch 4.02 FULL?
Another question,Can I flash my device with Arthemis touch 4.02 FULL?
I love this ROM,(it's cube and CPU overclock is so good).
Please Moderator users help us

I'm Done
I flashed my HTC LOVE!!!!
thanks to Artemis Touch 4.02 WM6.1 FULL by meschle!

please help
could u tell me how u update your rom.. i have same problem.... when i try to update mscreen wil blank.....

Use this
http://forum.xda-developers.com/showthread.php?t=311650

"I tried to Install " ARTEMIS TOUCH 4.02 WM6.1 WWE ROM Full",but in USPL Step my device display is White and after 30Second again ActiveSync Connected,then RomUpdateUtility went for Update and from 0% jump to 100% then show Error 247-Image fie Corrupted!
i reset my device and WM5 loaded again."
I have the same problem, I am with HTC 3350 and i can't upgrade it. Can you help me?

jtykulijokpdsvu said:
"I tried to Install " ARTEMIS TOUCH 4.02 WM6.1 WWE ROM Full",but in USPL Step my device display is White and after 30Second again ActiveSync Connected,then RomUpdateUtility went for Update and from 0% jump to 100% then show Error 247-Image fie Corrupted!
i reset my device and WM5 loaded again."
I have the same problem, I am with HTC 3350 and i can't upgrade it. Can you help me?
Click to expand...
Click to collapse
Run this USPL:
http://forum.xda-developers.com/showthread.php?t=311403
And then run step 2 from Artemis touch.

I try it but it dos not work. When I start start_uspl.exe when progress is 100% MS Active Sync just stop, after few seconds acticve sync start againg, and rom update start, but when the progress of instalation of ROM is 3 % active sync just stop and a have message "Error 270 Update Error, The image file is corrupted"

jtykulijokpdsvu said:
I try it but it dos not work. When I start start_uspl.exe when progress is 100% MS Active Sync just stop, after few seconds acticve sync start againg, and rom update start, but when the progress of instalation of ROM is 3 % active sync just stop and a have message "Error 270 Update Error, The image file is corrupted"
Click to expand...
Click to collapse
try it again, last time i instaled USPL 3 time's. after that it works.

HTC Universal Bootloader can't install

Hi All,
i have an QTEK 9000 device with Mobile 6.1 Prof. What I want was, that I can use the TORCH Mobile web brower. He has the engine same as Safari/IPhone. I had get the error message, that my memory is not enough, for that software?? I had disabled all the services, remove any programs, but the message comes every time. Next what I want was, that I install a lower version of the mobile system(5 or 6).
Ok I flashes down my device with the original Mobile 5. Now when the device is booting then comes the following screen: Blue background, QTEK in big white lettern, and the rom version in the right upper position in red lettern. After them the screen freeze. What I can do, is to reset(also hard). After them the device comes in the same screen????
Currently I can't installed any new bootloader or rom image....He says that I have an connection error. But the usb cable or the interface are working fine.
Has anyone an idee, how I get new imagers???
Thanks, Uwe

Hey,
I had the same problem, try this http://forum.xda-developers.com/showpost.php?p=1650610&postcount=347
Greetz

Changing comm manager

I have HTC Touch Elfin flashed to Shadow's 2.1 CE ROM and am trying to replace the comm manager with the one that is the "list" of sorts, black with the on/off on the right side. I tried a couple and all failed saying something about a program setting or not having permission. How can I change the comm manager?