Related
Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.
I did a rom upgrade on an hx2110 - installed successfully, but now the only thing I can get the pda to do is go into Pre bootloader mode (i.e. Pre-BL 1.00.02 blue screen). SO I tried the universal bootloader method - makes it all the way to the flashing portion but then does NOTHING - the terminal simply sits there saying "ready" and does not upload anything - the program sees the correct communication port (ie. usb01 or whatever). HOW do I force an upload???
Thanks!
Rusty
On another note - I had purchased a working 2110 with a good mobo to replace this one if the flash is not repairable - is that a difficult procedure? Unfortunately, the 2110 I purchased was not working, but this may still be in the books at a later time, so some info would help.
Thanks!
Rustmonkey said:
I did a rom upgrade on an hx2110 - installed successfully, but now the only thing I can get the pda to do is go into Pre bootloader mode (i.e. Pre-BL 1.00.02 blue screen). SO I tried the universal bootloader method - makes it all the way to the flashing portion but then does NOTHING - the terminal simply sits there saying "ready" and does not upload anything - the program sees the correct communication port (ie. usb01 or whatever). HOW do I force an upload???
Thanks!
Rusty
Click to expand...
Click to collapse
Rusty,
You are so lucky that I experienced this problem and solved it on my own. You did not specify what ROM you were loading, but here is the fix:
First you need to get another pocketpc, hx2000 series like yours that is working.
Put that device into white screen bootloader or pre-BL mode (depending on which device you got to borrow)
Ensure that the battery on that device is 100% charged.
Run the original ROM upgrade for the ROM you wish to install (use PDAViet if it's WM6 and use the HP SP32408 to Run it)
Hit all the Ok screens until it brings you to the one that has the "UPDATE" button.
Remove the working Ipaq from the cradle and place it's 100% battery in you own.
Put your Ipaq into pre-BL mode and put it on the cradle. Press the calendar button to activate the usb drivers.
Once it says "USB", Hit the "UPDATE" button and it will load the proper ROM to your IPaq.
When It is done, perform a hard reset by formatting the PS on the device.
Voila!! Your Ipaq is Un-Bricked!! Put in your original battery and charge it up!
Enjoy!!
Bless...
hi Rustmonkey,
i have the similar things - i made my hx2110 brick when i flashed it with a different language ROM, it went 100% when i flashed the ROM but didn't work at all after that.
the problem is i can get it in the bootloader mode after trying many ways, at the same time the pc can't find any USB device at all.
how to make it work again?
thanks.
reggaepoo said:
Rusty,
You are so lucky that I experienced this problem and solved it on my own. You did not specify what ROM you were loading, but here is the fix:
First you need to get another pocketpc, hx2000 series like yours that is working.
Put that device into white screen bootloader or pre-BL mode (depending on which device you got to borrow)
Ensure that the battery on that device is 100% charged.
Run the original ROM upgrade for the ROM you wish to install (use PDAViet if it's WM6 and use the HP SP32408 to Run it)
Hit all the Ok screens until it brings you to the one that has the "UPDATE" button.
Remove the working Ipaq from the cradle and place it's 100% battery in you own.
Put your Ipaq into pre-BL mode and put it on the cradle. Press the calendar button to activate the usb drivers.
Once it says "USB", Hit the "UPDATE" button and it will load the proper ROM to your IPaq.
When It is done, perform a hard reset by formatting the PS on the device.
Voila!! Your Ipaq is Un-Bricked!! Put in your original battery and charge it up!
Enjoy!!
Bless...
Click to expand...
Click to collapse
You, my good sir, are a genius - worked great! Fixed BOTH 2110s
tangwd898 said:
hi Rustmonkey,
i have the similar things - i made my hx2110 brick when i flashed it with a different language ROM, it went 100% when i flashed the ROM but didn't work at all after that.
the problem is i can get it in the bootloader mode after trying many ways, at the same time the pc can't find any USB device at all.
how to make it work again?
thanks.
Click to expand...
Click to collapse
You're going to need another hx2000 series to make sure the battery is fully charged - put the battery in and then use the bootloader keystrokes immediately (contacts+itask+reset) - you made need to tap reset a few times while holding the other two to get it to work. After it is in bootloader mode, push the calander button while it is connected to the cradle/usb to get the pc to recognize it
Rustmonkey said:
You're going to need another hx2000 series to make sure the battery is fully charged - put the battery in and then use the bootloader keystrokes immediately (contacts+itask+reset) - you made need to tap reset a few times while holding the other two to get it to work. After it is in bootloader mode, push the calander button while it is connected to the cradle/usb to get the pc to recognize it
Click to expand...
Click to collapse
really amazing !!!!!!
I just saved my hx2110 as per your step by step instruction now.
Thank you very much.
ok, well, I thought they were fixed... now one of them freezes at the bootup screen, even when I do a clean reset... I've tried reflashing multiple times to no avail... any ideas whats going on?
ok, got everything working - reflashed the non-working one back to an original 2003 rom - which made if freeze at boot - then upgraded it via pre-bl to 1.00.00.L - from here, it wouldn't do anything after filling the bar at the boot screen, but it didn't CRASH (as in lights out) - so I ran the pre-bl again and ran the flash program for 1.00.00.L again WITHOUT swapping between the 2495 and the 2110 - just put the 2110 in pre-bl and away we went - flashed, formatted, and booted - then proceed to upgrade to WM6 via 1.00.00.H --> 1.02.00.H --> WM6 - works GREAT!!!
Thanks for the help everyone!
Dear All,
I`ve got the same problem but i don`t have a second ipaq.. is there anyway to repair it with out the second device???
Thank you very much
Abs
Hello,
I have run into some problems with a bricked hx2110.
I was flashing the IPAQ to a new ROM WM5 (Battery was full and I read all the instructions 10 times prior to flashing). While flashing, the progress bar went to 100% then faded out immediately and it wouldn't reset (clean reset). I put the battery in my friends hx3000 series and the battery I used was completely dead. It did flash to 100% though, but not matter how many times I try 1 + 3 + reset, it doesn't reboot. If I can figure out how to get it to boot, that would be great, but I can't get anything to come up with any key combinations.
To this point all I can do is get into Pre-BL mode 1.00.04. I have tried the below scenarios on two machines, both running windows XP SP2 (USB 2.0) with the firewall and virus software disabled.
http://forum.xda-developers.com/showthread.php?t=330382&page=4
1) I have tried the above links directions and used the the Universal Bootloader (Bootloader.exe). It gets to the point where it says "The PDA should be updating now" or something similar but nothing happens. I don't get any errors regarding communications (it sees the device when I hold the "Calendar" button until it says USB; windows then recognizes the device as "HP USB ..." so I know it's communicating).
2) I tried to use the Bootloader_GUI.exe beta so that I can watch the progress indicator but it just sits at 0%. There are no error messages so it is communicating but for some reason, the device won't let it flash (and the flash utility thinks it's doing something).
3) I tried the original ROM flash from HP (SP29856.EXE) and it recognizes the device, but because the current ROM on the PDA is hosed, when it does it's "verifying" process, it comes up with "?" marks as the model number and when it goes to flash it starts at .1% then says "FINISHED" immediately. The ROM utility thinks it flashed it correctly but it didn't flash anything. I'm guessing that the verification of the PDA failed and forced the utility to not flash.
Does anyone have ANY ideas of what to try? I wish I had another HX2000 series PDA and try the "swap" thing prior to hitting the update button but I don't. All I have to work off of it my sad bricked PDA and a full battery (friend keeps charging it). His PDA is an HX3000 series.
Any ideas would be appreciated,
Thanks!
Are you using a the HP flash program that is specified for your device?
2nd - you might be able to use your buddies device in a swap as well - not sure but its worth a shot - use HPs upgrade program, let it verify, then swap your device onto the same cable - overwrite the firmware in the update program for HIS device with firmware compatible with yours and then hit update - let us know if this works...
I am using the "official" HP flash program specific for the HX2110 (from their website - SP29856), bootloader.exe, and bootloader_gui.exe
I wanted to try my friends, but he won't let me touch his because I bricked mine lol (I swore nothing would happen to his but he still won't let me try it).
Anyway, I just copied over the ROM image (from HP) and stripped out the header (now showing 64 bytes before the ECEC). The ROM is for WM2003. I copied the ROM in binary using psdwrite.exe to an 256 MB SD card. As soon as I can get the battery back, I'm going to try to flash it from the SD card. If this fails, I am going to try to play around with MTTY / USB and manually call the ROM flash and see what happens.
Having another HX2000 series would make this easy (maybe a little TO easy )!
Bootloader never worked for me - but if you can get it to manually call the flash, more power to you good luck!
Well it was worth a shot. After spending the better part of the day with the PDA, I have made no more progress (can't get Pre-Bl to update). The only option I have now is to find someone with another hx2000 series that is willing to resurrect it from the dead for me (PM me if you can help - I will pay two way fare). Until that happens, it's going in the "broken" drawer with all my old comp stuff .
Thanks to all the tips and tricks that is posted on these forums and brighthand! There is a wealth of information on this topic and without them, I would have gotten nowhere in trying to repair the device (granted, I wouldn't have been intrigued to upgrade the ROM in the first place and would still have a working PDA, but that's besides the point ).
Best of luck to you all.
1).download original ROM from HP (sp29799) -extract files
2) download http://upload.dvhk.pl/content.php?id=88892 - replace files
3) flesh device.
bay!
link crash http://upload.dvhk.pl/content.php?id=88892 - replace files
Please it can raise it again, thanks
Absolut3k said:
Dear All,
I`ve got the same problem but i don`t have a second ipaq.. is there anyway to repair it with out the second device???
Thank you very much
Abs
Click to expand...
Click to collapse
Same here.. is there another way to un-brick hx2110 on this problem ? thx ...
Solved, my hx2100 returns to be in this world
thank you i saved my ipaq
Hello everyone.
I do have some experience with rom modifications on my I-mate Jam, but this was the first time I tried to change my m700's rom.
Things I've removed from my rom (pretty fearsome):
-------
OEM\OEM_Lang_0409
blank.pwi
meeting.pwi
memo.pwi
phone.pwi
todo.pwi
OEM\OEMDrivers
Avrcp_MPplugin.dll
SYS\BaseApps\
-ApproveUpdate\
-AUTOUPDATE\
-Autoupdate_Lang_0409\
-caldll.dll\
-calendar.exe\
-calnot.exe\
-calstore.dll\
-calupd.exe\
-fexplore.exe\
-hotvoice.exe\
-idledetect.exe\
-notes.exe\
-pimapi.dll\
-pimdlg.dll\
-pimg.exe\
-pimgdll.dll\
-pimgres.dll\
-pimstore.dll\
-taskdll.dll\
-tasks.exe\
-calc.lnk
-calendar.lnk
-MobileCalculator.exe
-notetake.lnk
-pimg.lnk
-tasks.lnk
SYS\Browsing\
SYS\Browsing_DPI_96\
SYS\Catalog\
SYS\Catalog_Lang_0409\
SYS\Entertainment\
SYS\Entertainment_DPI_96\
SYS\Entertainment_Lang_0409\
SYS\Entertainment_Lang_0409_DPI_96\
SYS\FWUPDATE\
SYS\Fwupdate_Lang_0409\
SYS\IRDA\
SYS\IRDA_Lang_0409\
SYS\MediaOS\
SYS\MediaOS_Lang_0409\
SYS\MediaOS_resh_240_resv_320\
SYS\Office\
SYS\Office_DPI_96\
SYS\Office_Lang_0409\
SYS\Office_Lang_0409_DPI_96\
SYS\Os\
-ircomm.dll (only!)
SYS\Shell\
SYS\Transcriber\
SYS\Transcriber_Lang_0409\
SYS\Transcriber_Lang_0409_DPI_96\
SYS\WindowsLive\
SYS\WindowsLive_DPI_96\
SYS\WindowsLive_Lang_0409\
-------
I didnt modify my registry, cause I thought it will give errors, but the rom will still be working. I was going to clean up non existing keys with sktools.
I've packed my rom back, everything went ok.
I've uploaded rom to my eten m700 via usb. Again everything was ok.
Then I've made a hard reset (after the installation) and the device booted (the screen was orange). But nothing happened after. The device froze.
_______
Could it happen becouse I didn't remove 'today plugins' in a registry?
Or some programms are hardcoded to wince, so u just cant boot without them?
-------
Oh yes, ActiveSync doesn't see my device. I've heard it is possible to start usb sync from the knight mode. How do I do it?
press the camera button and screen off button together. reset the cellphone while still holding the two buttons. it will go to dark mode
Thx for the tip.
In test mode, I've found out that my Os image checksum is smaller. So I'd probably add irda dll back. I'll also remove all today plugins in registry settings to make sure the os can boot properly.
------
Here comes the question!
I enter the bootloader mode on my device. It says USB host is connected. Waiting a download.
But my activesync doesn't see the device... And when I start upgrading the device here what comes out:
Can't connect to the device. Please make sure ActiveSync is working normally.
How do I fight this? I don't have a sd card yet...
[Solved]
Yes, there is a trick! Thx to Юрка, from 4pda.
U just need to plug any other communicator (wince) to the cord, start the updater. When it comes to the download (black pic apears to the left, saying smth about download)
-put your nonworking device in a bootloader mode (hold down turn on/off button + recorder button and push restart, then release power button, but still keep holding the recorder button)
-unplug ur other device from the cable
-plugin the eten nonworking device
click upload and after everything went well - ENJOY!
Hey guys,
I have the Bootloader all happy and running but after flashing the Radio (I did this because I thought it would fix random crashes and GPRS crashing) the OS just hangs in boot even after hard resetting.
How do I go about flashing when in Bootloader mode?
Cheers,
Callum
EDIT: I tried with the TTY app (mtty) but it fails to show a USB port. I noticed that Windows XP just sits on acquiring network address.
Hey.
You must deactivate AcitveSync --> "Allow USB Connections" and kill all ActiveSync Processes.
If you have Vista you need other Drivers. Search in google 'VistaRUU'.
You could Flash VIA SD Card from Bootloader, just try to search a little bit in google.
cu
pOpY
If you have installed in the past Hard SPL, you should be able to flash a new ROM from the bootloader screen. Simply choose Hard SPL on the installer.
I have a SIMILAR ISSUE I I have issues with an old Hermes not gonna get into it, but I gotta outta what I thought was my WORST mess ever. Now my 8525 boots (I have the Official AT&T WM6 ROM) see all the opening screens and BOOM it JUST HANGS on the TOUCHSCREEN CALIBRATION screen!!! Touchscreen is completely UNRESPONSIVE so are 90% of the rest of the buttons I can power off and use the side scroll Blackberry dial, and I think the Right SOFT KEY brings UP a USELESS menu, BUT I AM STUCK AT THE CALIBRATION screen no touchscreen I have done A Hard Reset 1000 times, I can connect via ActiveSync with my PC, cant Flash Anything though I get ERROR 260 So I just have a booting 8525 stuck on th4e calibration screen
ANY IDEAS??????????/
nicknowsky said:
I have a SIMILAR ISSUE I I have issues with an old Hermes not gonna get into it, but I gotta outta what I thought was my WORST mess ever. Now my 8525 boots (I have the Official AT&T WM6 ROM) see all the opening screens and BOOM it JUST HANGS on the TOUCHSCREEN CALIBRATION screen!!! Touchscreen is completely UNRESPONSIVE so are 90% of the rest of the buttons I can power off and use the side scroll Blackberry dial, and I think the Right SOFT KEY brings UP a USELESS menu, BUT I AM STUCK AT THE CALIBRATION screen no touchscreen I have done A Hard Reset 1000 times, I can connect via ActiveSync with my PC, cant Flash Anything though I get ERROR 260 So I just have a booting 8525 stuck on th4e calibration screen
ANY IDEAS??????????/
Click to expand...
Click to collapse
check out this link
http://forum.xda-developers.com/showthread.php?t=382578
If you've Hard SPLed your hermes, try the sd card method. 1st, you need to back up your card, format it fat 32 then copy the .nbh file onto from the rom of your choice. rename the nbh file to "Hermimg.nbh" then insert into phone. put hermes into bootloader and follow the prompts. this will reflash another os. Hope this gets you out of your pickle... cheers
If anyone can help i have a hp ipaq h2200 and i tryed to do a bios update but now it`s stuck the onley thing that shows me is a image with hp,usb and v1.08 can anyone help me please?is there any way i can make it work again?is there any ROM for this kind of device maybe a wm5 or wm6?
no one can help me?
Profy_X said:
If anyone can help i have a hp ipaq h2200 and i tryed to do a bios update but now it`s stuck the onley thing that shows me is a image with hp,usb and v1.08 can anyone help me please?is there any way i can make it work again?is there any ROM for this kind of device maybe a wm5 or wm6?
Click to expand...
Click to collapse
go boot loader mode before upgrade
but how do i do this?it isn`t in bootloader?(it shows a hp image up shows usb and down v1,08)
...
First important question: what upgrade did you try to do?
For iPAQ h2200 there is no cooked ROMs: WM5 or WM6x. This device can work only under branded WM2003se.
If you tried to do upgrade to any of cooked ROM like WM6.0 from different device like hx22xx by mistake, please try the following:
1. Go to HP www page and download the last available ROM upgrade (I assume English ROM)
2. Turn on iPAQ (don't carry the device doesn't boot properly) and place it to the cradle which should be connected to PC which has installed active sync software (please don't carry about lack of connection seen on active sync).
3. Run the ROM upgrade.
If you tried the HP upgrade and it stuck - just repeat them with the way described above.
Important - do not use blue tooth connection during flash !!! Only USB !!!
Good luck.
If it doesn't help I believe there is hundred of similar cases described in forums - try to search the solution there
bigu1975 said:
This device can work only under branded WM2003se.
Click to expand...
Click to collapse
More precisely: WM2003 only - no SE upgrades for the h2210.
i upgraded the v1.10 original ROM from HP home site but now i solved the problem with mtty and ultra edith but now i have a nother problem i flashed again the ROM but its stuck on the loggin bar from startup it just fill the bar but windows doesn`t start i tryed again to flash and the problem still persist any sollutions?
Profy_X said:
i flashed again the ROM but its stuck on the loggin bar from startup it just fill the bar but windows doesn`t start i tryed again to flash and the problem still persist any sollutions?
Click to expand...
Click to collapse
As I understand you correctly - you restored your iPAQ into live using the last available ROM from HP site, which is WM2003 (thank you Menneisyys). The iPAQ worked fine and then you was trying to make another ROM upgrade - which ROM did you use?
I am asking because the ROM in version 1.10 is the most actual one and there is no any other ROM for this device. I assume that source of your problem is you are trying to use incorrect ROM. Correct me if I am wrong... If this is true - the solution is to restore your device into operational using the way as you did it before and stop to flashing your device - there is no another ROM to your iPAQ
the v1.10 but the problem is that after i flash the wm doesn`t start it just stay there stuck on the startup and i reflashed the device but still doesn`t start
how did u fix the stucked screen while booting? im searching for solutions for 30 mins now, but dind't find a way...
please help somebody..
ok, for those with "same" problems like me:
i have windows 7 64bit. the rom flashing wasn't successfull on this machine. i did the same on my notebook with windows xp and it worked. before it said that it couldn't find my ppc. on the notebook it wasn't a problem.
i had these installation notes found anywhere:
1.) Go to the Vendor Website, and...
2.) Select the appropriate hyperlink for your model.
3.) Download the most recent BIOS version.
4.) Press the POWER + iTASK + CONTACTS + RESET buttons at the same time so as to enter the FLASH Mode
5.) Make sure your USB connection to the Cradle is hooked-up.
6.) Place your PDA in the USB Cradle.
7.) Stop the MS ActiveSync session on your HOST PC: CTRL-ALT-DELETE > TASK MANAGER > PROCESSES.
8.) Highlight WESCOMM.EXE and select "End Process" button.
9.) Run the file you downloaded from your Vendor in step 3.
10.) The PDA should now begin Flashing the iPAQ's ROM BIOS.
i ignored step 4.)
hope that it helped somebody