Related
I switched on my phone today, and it loaded the o2 screen, and now is permanently stuck on the Black and Blue screen.
I using Tom's B&B 4.0 touch-flo rom.
Please help!
try a hard reset, something similar happened to me when i was using a different rom and a hard reset fixed it, hope that helps.
Hard reset is when you push call and end buttons together and insert the stylus?
Didnt work either.
hmm.. maybe reinstall the rom then? Did you install any programs on the phone??
It's not detecting the fone, hence I cant even reinstall the ROM.
Is there any way 2 recover from this? Or did I just loose 700 bucks!?
Even problem whereas I had any concern with this version v4.0…
I flashé my artemis 4 or 5 times, it went super… (I would have of the Juste to make hardware reset…).
Since my 2 last flash, that blocks on the page during more 5min…
Flash after flash, always similar
http://forum.xda-developers.com/showthread.php?p=1445305&posted=1#post1445305
So wait, were you able to fix it?
As of right now my fone is sitting like a brick on my table.
Me I wait, of the blow I do not make more software reset…
I am obliged to await more 5min before being able to type my code PIN.
I do not include/understand, that had ever done it to me before this last flash.
I have remakes a flash, always similar, even while passing by a ROM Orange, as soon as I pass by again in V4.0, that does it to me!!!!
Its been over 5 mins for me and its still stuck on the B&B screen. HELP!
Make a hard reset and change the ROM....v3.7 for exemple...
Yea, I tried reflashing it, but the Rom update utility doesnt detect the fone at all.
Look this :
http://www.forummobiles.com/index.php?showtopic=139079
It's a french but it's easy with photo !
I read it, but because it never passes the boot screen, it never detects it hence it doesnt show up in the device manager.
What 2 do!?
Try hard reset again. What did you mean when you said it doesn't work? It didn't do anything? It tried re-installing and failed? What happened?
You don't need the ROM update utility to do a hard reset.
B&B 4.0 Getting stuck on the windows loader, is a know problem. TRy a hard reset to fix it.
Hard reset: Stylus in the hole on the side, and press the two " - " buttons between the red and green button.
This should fix the problem. Now you can flash another rom into the P3300. I'm, running 3.4 without any problem. I updated it with the HTC Tabs from Tom wich used in B&B 4.0.
The problem is that V4.0 functioned very well on my first flash…
while reinstalling the plug in HTC Home + the file SDK, that is better!!
Normal :
http://forum.xda-developers.com/attachment.php?attachmentid=47324&d=1187262723
Color :
http://forum.xda-developers.com/attachment.php?attachmentid=47329&d=1187264616
File SDK :
http://forum.xda-developers.com/attachment.php?attachmentid=47339&d=1187272601
I may come back, for now my Artemis is sitting, bricked, on my table and I've tried everything.
Someone please tell me what I'm doing wrong?
You need to flash via bootloader - hold record button down and soft reset - you now have multicolored screen - connect via usb and flash - you dont need activesync this way.
Hi i just had my Artemis back from tmobile, i had bricked it by updating rom..
so now is my question can you backup your ROm?
So if i brick it i can replace it ?
Mt
44 views still no solution...
let me give you a good advise!! many people used those coocked roms and ended with a bricked or non functional device included me!
i did a back up of my rom and restore it after i had so much troubles with wm6!! now i send it to t-mobile for reparation and hope they will help me because i unlocked my artemis.
@lommer you still have problems after restoring the original ROM?
drkbg said:
@lommer you still have problems after restoring the original ROM?
Click to expand...
Click to collapse
yes, thats why i send it to t-mobile for repair , it is 1 week ago and i'm still waiting. i will let you know when i get it back to see if the problem in the software or hardware is. my problem was that my device turns off everytime.
lommer said:
yes, thats why i send it to t-mobile for repair , it is 1 week ago and i'm still waiting. i will let you know when i get it back to see if the problem in the software or hardware is. my problem was that my device turns off everytime.
Click to expand...
Click to collapse
i dont think that has anuthing to do with the ROM..
I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.
Flower said:
I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.
Click to expand...
Click to collapse
Sameproblem, someone has a solution?
There is a possibility to load the bootloader!
Press and hold camera & power buttons together and make soft reset with your pen and hold camera & power buttons together until it says "bootloader mode"
Here you can load your rom on to it!
Good luck!
Ps. does anyone have a original dutch tmobile rom?!
bravo2001 said:
There is a possibility to load the bootloader!
Press and hold camera & power buttons together and make soft reset with your pen and hold camera & power buttons together until it says "bootloader mode"
Here you can load your rom on to it!
Good luck!
Ps. does anyone have a original dutch tmobile rom?!
Click to expand...
Click to collapse
Already tried that 60 times... i think i need a original dutch tmobile rom...
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Been there a few times myself.
Do you live in the US? If so, I could call you and walk you through it, or MSN chat, or??? or if you'd rather, let me know and I will try to walk you through it in here.
I am in Europe, time difference is large, appreciate if you give step by step instructions in this forum. Thanks again.
SuperSport,
Hi agin, waiting for ur instructions. I am missing my trinity.
Once agin thanks for ur help
Sorry to hear that...you can have a look here:
http://forum.xda-developers.com/showthread.php?t=299659
and here
http://trinityguides.info/index.php?option=com_frontpage&Itemid=1
hope that can help...
good luck...
jma81113 said:
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Click to expand...
Click to collapse
I apologize jma81113. I was unexpectedly called out of town. My nephew crashed his motorcycle and is in the hospital, so I rushed over there. I'm back now.
Any time I cannot flash another rom, I am forced to flash back to an OEM rom, in my case, I use the one found here: http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
This flashes back the original SPL, Radio, OS, etc... It works best if you can do it from a Windows XP computer. If you don't have that option, there are ways to do it using Vista outlined here.
Then I always flash the Hard SPL found here. In my case, I use Des' Crash Proof. I've had the most success flashing Cooked ROMS with this one.
From there, Flashing Cooked ROMS should work just fine. If you run into trouble, you might have to flash back to the OEM ROM again. Occasionally, I have to. I keep a copy on hand at all times.
Oops! Actually, as I read back through your message, I see that you might be getting just a BLACK screen? Is this correct? And I assume by you saying you tried to get the SPL that you mean you pushed the 'power' 'camera' and 'reset' buttons and nothing? If that's the case, let me know and I'll do some more research.
Just so I know, do you get the orange LED lighting up when you plug in the USB cable showing it's charging?
SuperSport
I am sorry to hear about your nephew accident, I hope he is well and wish him well.
Yes I got a BLACK screen when I press the 'power' 'camera' and 'reset' buttons. The device is completely dead.
When i connect the device to the laptop, red LED lights up for 10 seconds and then disappears, I even changed the battery but no sucess.
Hard Reset?
Oops! Sorry, just re-read your first post. Looks like you tried this already...
The Black Screen is new to me, so I'm shooting in the dark.
You many have already done this, but, have you tried a HARD reset? Press the 'Calendar' 'Contacts' and then 'Reset' buttons all together. Hopefully this will bring up a screen that asks if you want to do a reset. Press the Green Send key and it will reset. Let me know if that works or not...
Buttons shown in attached image:
I have done it already no luck, it seems I am going to send it to the dealer in Malaysia. Thanks any way Supersport for your time and effort. Once again hope your nephew is will.
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.
hi
i need some help to restore my stock spl as i want to send my phone for repairs, im pretty sure the digitizer is bust as i cannot use the touch screen but the lcd is fine, ive already flashed the stock rom but as for the spl i cannot get passed the prompt screen to install it.
is there a keyboard short cut to get passed the prompt commands?.
ive already tried programs such as my mobiler but same problem because of the screen prompts.
help plz!
Here you go.
This is for a GSM Rhodium
You can also reflash a stock rom to get original spl(I think)
Press power and vol down during reset to get into bootloader to bypass activsync and touch screen
wow ty soo much i didnt know you could do it through the bootloader screen, now its time too see if its too late or not to repair it through warranty
again thx for ur reply