Develop Bugs

can any help: ROm Upgrading problem

I was upgrading my XDA2, it said completed, and when i restarted it, the o2 splash screen appears with radio verson 1.17 and thats where it stays... can anyone help. I have tried reinstalling the rom.... but it cant see the pda, and aborts...
Help would be appreciated

Does your device have a bootloader mode? If so get it into, connect usb & start upgrade program. This works on a magician, maybe on yours too?
Regards, M

thank you for the advice, but it is himayalian model.....so i do not know it it has a boot loader.

Read & repair
Hi Smudge,
Take a look at this post & got it from the thread 'stuck in 02 splash screen' at http://forum.xda-developers.com/viewtopic.php?t=25830&highlight=himalaya bootloader 4th post.
RAGOv said:
well my friend i think somehow ur OS is lost and all u still have is the extended rom OS image,that's why u still see the splash screen...
i assume that ur device is a himalaya(though u did'nt mention any informations :wink: ),but if really is,then do the following:
1-log in to this forum as user:xda pass:xda
2-go to ftp server from the wiki page(up left ur screen)
3-go to himalaya folder and download any rom u would like 2 have(it can appear in several way,exe file or several files zipped in a .zip)
4-if it's and exe file and u have winrar,then extract the content in a folder,u will find 6 files(maybe less,rarely 1 file more-xda2nbftool.exe-),now forget about this file for the moment
u will need 2 file to fix ur phone:nk.nbf & HimauUpgradeUt.exe(i idvice u to dowload an O2 rom upgrade to prevent country id error wich can be fixed if necessary )
now that u have the tools,do the following:
1-press power button+navigation pad(the round one between the green and the red buttons)+reset b
utton SIMULTANESLY,u will enter bootloader mode(blank screen with serial on the upper side of the screen,number like 1.06 on the buttom)
2-put the cradle in usb port DIRECTLY IN UR COMPUTER NOT THROUGH USB HUB
3-put ur phone in the cradle while it's in bootloader mode,u will see that the serial word in the upper screen have changed into USB
4-run HimaUpgradeUt.exe and follow the on screen instructions,u will see a status bar,wait untill it finishes,hard reset ur phone,and here we go
i forgot to mension that u should put those 2 files(HimaUpgradeUt.exe & nk.nbf),in a separate folder,close any open task on ur desktop/laptop,and PUT UR CHARGER IN THE CRADLE for the battery don't run out...
hope i helped
tell me what happened with u dude,and remember that ur in the best PDAs developping site in the world,so don't worry,hopefully,everything can be fixed....
RAGO :lol:
Click to expand...
Click to collapse
Cheers, M

Jasjar First Day, Upgraded And Now Dead ! Need Help Plz

Hi guys,
I tried to upgrade my jasjar with "JASJAR_WWE_19096_19505_11300_AKU_3_2_ship.exe" i download it from this forum, first i tried it and it said " error 101 communication problem" or something like that then i tried it again and it took a bit more time to give the same error but when i looked at my pda on the screen says : Serial V1.0 the PC doesnt recognize it.
Ive searched throw the forum few hours and ive tried reset+power+camera or light and it doesnt work, its my first day with it, i was so happy and now dead
Please i need your help
P.D : Its the V1640 of Vodafone.

Intunes said:
Hi guys,
when i looked at my pda on the screen says : Serial V1.0 the PC doesnt recognize it.
Please i need your help
P.D : Its the V1640 of Vodafone.
Click to expand...
Click to collapse
First, here is the instruction guide: http://forum.xda-developers.com/showthread.php?t=269118
Second: You are on the BootLoader Mode. That is fine, don't worry. Relax and breathe easy.
Third: If you are going to try NEW ROMs try Helmi's: http://forum.xda-developers.com/showthread.php?t=284887
Good luck, mate.

Cktlcmd, thanks for your fast answer i was getting desesperated, ive downloaded few ROMS also the one you're telling me and i can only see nk.nbf not the radio or the extended rom only the windows mobile one, and the one i tried to upgrade was a .exe ..any other link i can download the rom ? doesnt matter if its the last one, now ill be happy if i could switch it on

Intunes said:
Cktlcmd, thanks for your fast answer i was getting desesperated, ive downloaded few ROMS also the one you're telling me and i can only see nk.nbf not the radio or the extended rom only the windows mobile one, and the one i tried to upgrade was a .exe ..any other link i can download the rom ? doesnt matter if its the last one, now ill be happy if i could switch it on
Click to expand...
Click to collapse
That is fine, that's all you need, because technically, you already have the radio and Ext ROM installed on your device. Read the instructions FULLY on the 1st link. Since you don't have the ms.nbf and radio.nbf file, you are just upgarding the CE ROM. Therefore on the new folder that you are going to compile, you only need 9 files enumerated on the list (some are included on Helmi's File download).

cktlcmd, im inserting maupgradeut_noid_602.exe in Helmi directory and execute, it goes everything ok but when i click on upgrade it appers "ERROR 150 : ROM UPGRADE UTILITY ERROR "

Intunes said:
cktlcmd, im inserting maupgradeut_noid_602.exe in Helmi directory and execute, it goes everything ok but when i click on upgrade it appers "ERROR 150 : ROM UPGRADE UTILITY ERROR "
Click to expand...
Click to collapse
Did you put your device on boot loader mode by pressing the RESET PIN, BACKLIGHT BUTTON, and POWER BUTTON all at once? If NO, do that first then double click or run the Ma_Upgrade file included.

Replace the Ma Upgrade file, I updated the file from the 1st link.
Good luck my friend.

Hi cktlcmd, ive tried to do the RESET PIN, BACKLIGHT BUTTON, and POWER BUTTON ive done it thousand times and the only thing that happens its that the Serial V1.0 goes off one second and comes back

Intunes said:
Hi cktlcmd, ive tried to do the RESET PIN, BACKLIGHT BUTTON, and POWER BUTTON ive done it thousand times and the only thing that happens its that the Serial V1.0 goes off one second and comes back
Click to expand...
Click to collapse
Have you tried replacing the Ma_Upgrade_No ID File? Download it again from the 1st link. Sometimes they become corrupted for no reason.
Intunes said:
cktlcmd, im inserting maupgradeut_noid_602.exe
Click to expand...
Click to collapse
I don't know why your Ma_Upgrade file has numbers behind it??????

Intunes said:
Hi cktlcmd, ive tried to do the RESET PIN, BACKLIGHT BUTTON, and POWER BUTTON ive done it thousand times and the only thing that happens its that the Serial V1.0 goes off one second and comes back
Click to expand...
Click to collapse
You are on the right track here. It must be the Ma_Upgrade file. You just need to reflash your device.

Ive downloaded the new maupgradeut_noid_602.exe but keeps on with the same 150 error ive tried it like 20 times already and it doesnt go

First objective is to get instead of SERIAL the "USB" message.
Please disable any firewall you have first ! Second reboot pc and change the USB port.

Hi Decebal,
Thanks for your help, the firewall is already off, should i uninstall active sync ?

try installing the 4.5 beta.

Installed Active Sync 4.5 beta and it keeps without detecting the pda

Intunes said:
Ive downloaded the new maupgradeut_noid_602.exe but keeps on with the same 150 error ive tried it like 20 times already and it doesnt go
Click to expand...
Click to collapse
Why do you have the number "602" behind the name???? Mine does not have it.
Does your PC make a sound at all when you plug your Universal?

cktlmd first thank for all your time and answers, when i plug the universal it just appears that it doesnt recognize the usb device that's it and the file ive got for the upgrader is MaUpgradeUt_noID.exe i download it again from the link you told me and it doesnt goes, i uninstall the active sync and it seems like nothing is connected when i double click the upgrader, it finishes with congrats but nothing has been done to the universal.

Intunes said:
cktlmd first thank for all your time and answers, when i plug the universal it just appears that it doesnt recognize the usb device that's it and the file ive got for the upgrader is MaUpgradeUt_noID.exe i download it again from the link you told me and it doesnt goes, i uninstall the active sync and it seems like nothing is connected when i double click the upgrader, it finishes with congrats but nothing has been done to the universal.
Click to expand...
Click to collapse
When you say you double click the upgrader, which do you mean, the "maupgrade no id" file or the "ROM UPgrade" File? You should be running the MaUpgrade File.
If this still does not work, try downloading the original ROM from the device manufacturer.

if you have another PC around without activesync retry the procedure !

decebal said:
if you have another PC around without activesync retry the procedure !
Click to expand...
Click to collapse
Or use a friends computer just so your Universal can be recognize.
Another thing, are you using a USB hub? If yes, then switch to a different USB plug. Your Universal needs to be connected directly to your computer and not a hub.

I canoot start, i cannot repair ROM

Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.

Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!

I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.

Power+Camera+reset button with ur touch pen

sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?

OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!

exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734

manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!

Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.

problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx

slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life

i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english

Bricked JasJam , help :(:(

Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....

try doing a hard reset not just a soft reset that might help

medo_punsher said:
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
Click to expand...
Click to collapse
if u have loaded hardspl then hold power button + OK button on sides of phone and then stick stylus into reset button an dthis should get u 2 red, green, white, blue colour screen and then plug usb in and re-flash

get hermes in bootloader mode, connect USB cable and flash with this http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html

Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??

Activesync doesn't need to be runing.
download mtty and do like he said here "http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen" (copy all text between " " and paste to your browser).
After "set 14" give "task 8"

Try flashing from SD card, first the HardSpl ant then the Original Stripped ROM.

@TheMim : tried but didnt work
@eryunt : how ?? i have a custom rom with the name HERMIMG.nbh on my sd card but it doesnt upgrade it says loading for a few seconds then some red numbers and letters appear at the top of the screen then it goes into the bootloader and doesnt upgrade
NOTE THAT : i dont have hard spl (no supercid)
Thnx again , plz help

Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
Hope it fixes your Tytn

Many thanks for your help , i will try that tomorrow but one final question ,
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??

medo_punsher said:
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
Click to expand...
Click to collapse
Yes, you need an SD-Reader for your PC

Okay , now i have a cooked rom on my sd card (fat32 formatted) named HERMIMG.nbh when i get into bootloader it says loading for a few second then a red number "00068002" appears at the top of the screen and it continues to the tri-colour bootloader
any help ??

Have You already installed HARDSpl correctly via SD-card?

No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??

medo_punsher said:
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
Click to expand...
Click to collapse
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
JUST FOLLOW ALL THE STEPS ABOVE

No no no no..... HSPL cant be upgraded now via SD card cause th SSPL was unsuccesfull!!!!!.....
Get a XP PC... your batt must be 50% charged or more "better", a working USB cable
NO SD CARD inserted... your XP pc must have NET frameworks 3.5
put your device in bootloader mode.... and upgrade any stock rom to rewrite a valid SPL cause your is corrupted now
then when you get a stock rom working via SSPL you will be able to redo the steps to flash HSPL V7

Bootloading not working..or is it :)

Hello my name is austin and im running windows 8.1 ya i know why would i want that..well its fast sooooo..any whooo i have rocket chip 3066 based tablet and im trying to get it to get into bootloader mode witch I DID but it ended up saying device discriptor error on the usb devices SOOO i found the hub it was connected to and disabled it then it made the rock chip show up on the list of devices i opened rk batch tool as a test and would you know it was green well thats not the tool i have to use to flash this kernel i have to use the regular rk andriod tool..but when i open it it says no rk andriod usb device detected...is that weird? any how i need to get this to work..someone any one? have any ideas as to why? yes iv reinstalled the drivers and tryed 17 differnt ones and the only one that works is the rk usb driver i got from rk site.
i really have no idea how to make this work..so i tryed the rk batch tool and tryed to see if i could get it to do any thing.. so i clicked the swtich button but it said this is not supported..well it was dumb for me to try sense its allready in flash mode but still...i fill like somthing is wrong.
any help? ohh im using the GAME MID tablet
(EDIT(
GOOD NEWS EVERY ONE i figured out why the other programs would not regonize it so i went into the settings .inf file and changed the usb11 thing to 1 and then it WORKED!
but when i tryed to flash the kernal and recovery img files in the tool it showed the out put but said info start run . start to test. test device failed. run failed....this is so close..i hope someoen can help me im using a kernal edited by OMA he did it just for me and said to just flash the TUVVA kernal and the rocvery img provided by him and us the correct paths I DID and the address..witch i did.. :/ i hope someone knows SOMTHING

pl
Bump

ummm
No one can help??????

excellent my friend, but in other problem could you please put the specifications device?