Related
I just installed wm6 thanks to you guys! (WOO HOO!!) So far soo good...
Except I installed Esmertec Jbed and Jeodek but sadly they do not work when I click on the little red icon! (installed via cab)
I get the error:
The file 'jbed' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Anyone know a fix? I really wanna get gmail working on here! My friend has a blackberry and I want to 'put out his fire'
Additionally, from 100%, I took the new WM6 off the charger today for about 15 minutes and it went down to 94% (wifi was on...) This seems like a very fast battery drain NO? Is there any reason for concern?
Thirdly, I notice even on lower volumes when I play some music, the speaker making cracking sounds...??
There is no native ppc Gmail client? I need the jvm version? Same by Opera?
Any really fun games anyone recommends also ?
*update* Got an error trying to install Windows Live! PPC displayed: "unsuccessful" for the cab... WHY!?! ahhh
I had the same problem installing windows live yesterday. But after a soft reset the program installed successfully.
For gmail, I dont use it but I found a link with freeware progs that include this future:
http://en.softonic.com/search/gmail/1111
torahtrance said:
Except I installed Esmertec Jbed and Jeodek but sadly they do not work when I click on the little red icon! (installed via cab)
I get the error:
The file 'jbed' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Anyone know a fix? I really wanna get gmail working on here! My friend has a blackberry and I want to 'put out his fire'
*update* Got an error trying to install Windows Live! PPC displayed: "unsuccessful" for the cab... WHY!?! ahhh
Click to expand...
Click to collapse
I have the same error with wm6 and x50v - anybody can point to resolution?
I have the same error message while starting jbed on my IPAQ hx4700 WM6.1.
Is there a solution out there?
http://forum.xda-developers.com/showthread.php?t=385574
Thank you very much Asbestos!
it works!
I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil
Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
After extracting using WinRAR
Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.
Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.
Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk
Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.
Apologies if this has been covered elsewhere, but a forum search revealed nothing...
How do I install .NET 3.5 on my Touch HD?
I have installed Advanced Congif , and it tells me i need to install .NET in order for it to work.
I downloaded the .net redistributable file from the MS website (filename is NETCFSetupv35.msi), but when I try to run it on my HD as I would with a .cab file, it tells me there's no associated program to run it.
I guess it has to be installed some other way (through ActiveSync maybe?), but I don't know.
Any helpful soul out there care to put me out of my misery?
Cheers in advance
Pete
Yes it has to be done through Activesync.
run it on your pc, and it will install on your device (or next time you connect if you're not connected when you run it)
It says on the microsoft download page...:
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
and
Instructions
Click the Download button on this page to start the download, or choose a different language from the drop-down list and click Change.
Do one of the following:
To start the installation immediately, click Open or Run this program from its current location.
To copy the download to your computer for installation at a later time, click Save or Save this program to disk.
...
Use a CAB
myearwood173 said:
Yes it has to be done through Activesync.
Click to expand...
Click to collapse
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Link:
http://www.fileden.com/files/2008/7/1/1983933/Microsoft_.NET_CF_3.5.CAB
Thanks!
Thanks guys,
sorted, using the .cab (couldn't work out how to do it with Activesync).
Can't install :-(
Nooo! I have a problem...
I had some trouble with .NET CF 3.5, and then I wanted to reinstall it, but when I uninstalled it, and then tried to install it again, it didn't work.
It doesn't work through ActiveSync AND the cab. Do anyone know whats wrong here, or do I need to start a new thread?
Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..
hanjoster said:
Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..
Click to expand...
Click to collapse
My ActiveSync is okay, and the cab is from the microsoft site...
EDIT:I think something is wrong with my phone, but I don't want to do a Hard reset.
Installed no problem if you use your PC to get the CAB just pop in onto the memory card, bung it in your phone and using file explorer locate file and install onto your device. Easeeee
Even easier would be to use PIE and visit this site/thread and follow the link to download directly onto phone then do above in File Explorer
http://www.fileden.com/files/2008/7/...NET_CF_3.5.CAB
Thanks clb92
clb92 said:
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Click to expand...
Click to collapse
Thank you! Worked like a charm!
.NET 3.5 cab
bro,
.NET 3.5 is available as cab for direct installation on to your phone. Copy in to your phone / storage card and install in phone memory. I have installed on my HD stock rom and works fine. Here it is .... hope this will help, this is my first response to a mail and hope what i do is right. thanks Dr Shaheed
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
still no solution to this problem, my friend might have to reflash back to original and do warranty exchange...i don't know what went wrong...he needs a new phone anyways...or maybe get the updated dash
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
pychobj2001 said:
They are in there, the wifiinit.ink is in startup and the wifiinit.exe is in the windows folder, still no luck...reflashed to original rom (even that didn't work), i'm hoping there is a cab that can reload the driver...but only found SDIO wifi driver cab..those don't work....
Click to expand...
Click to collapse
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Bupahs said:
The drivers are included in every ROM I have ever flashed, loading them comes from the .lnk file. So unless you are getting an error that the drivers do not exist or have failed they are their. It is possible your .lnk file is pointing to the wrong location
Click to expand...
Click to collapse
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
pychobj2001 said:
no, becuase i deleted the .ink, copied the .exe from the windows dir and pasted a shortcut of it in the startup folder.....i don't have the dash now..my friend does...I think he should go to the g1, or just grab a 1yr replacement one, but he doesn't want a refurb which is ussaully what they give u
Click to expand...
Click to collapse
why would you move the exe? How did you make a shortcut if you moved the exe? The G1 sux (sorry to those that think otherwise but it does). You only get a refurb if you dont ask for a new replacement. I always get new, after all I bought a new device not a refurb didnt I?
Anyway, it sounds like you created a bad shortcut for wifi and thats your issue
the .ink file is mising in my startup folder. What should i do? the .exe is still there
nikmash232 said:
the .ink file is mising in my startup folder. What should i do? the .exe is still there
Click to expand...
Click to collapse
Make a new link file, use total commander to do it or if you need I can upload one for you
pychobj2001 said:
I was updating my freinds dash, he had official rom on it, i went to rose rom v1.7a and also kavana final and some others and then i went back to latest t-mobile official rom 1.16 something, and all of them now say "drivers is not loaded" when you go to look at the wifi status, I loaded the WM2005 SDIO wifi drivers cab and also got a fresh copy of wifiinit.exe in the windows folder and then put the shortcut to it in the startup folder....i now have it running the rose v1.7a, i am lost, i'm on the phone now with a clueless pda expert at t-mobile.
Click to expand...
Click to collapse
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
majedaly said:
I have the same problem, the WIFIinit.lnk is in the startup folder, and WIFI is not working. Any help?
Click to expand...
Click to collapse
Strange, the problem was due to a defective battery! Seems that when I try to switch on WIFI and SD, the battery level goes down in a way that the OS does not load the drivers. Charged the battery to 100%, and rebooted, everything works normally.
if you have a drivers problem, should try with this...i had the same in my dash...."drivers not loaded"...i put this files on the phone and wifi works again.
Please help
I just got my dash. I upgraded it to the kavanna but then i wanted to give the vanilla version a try since i needed a cleaner version it had a picture of the tmobile shadow but i thought it would be ok since the folder tittle said excalibur. It gave me and error at 3 % saying that the iimage was the incorrect size. Then it started up with kavanna but there was no wifi option. Then i downgraded to wm6 standard but my wifi wont start. When i check the settings it tells me that the driver is not loaded. Ive been looking around in this forum for 2 days. All i see is people saying that this topic has been covered already. I tried the wininit.ink and exe thing and no success. I hard reseted and nothing. I tried different roms and the official tmobile but nothing seems to work. Is there a way to start from scratch???i just want to stick with the official tmobile rom. Please help meee.
Im running vista ultimate
the official tmobile rom latest version
wifi driver not loaded on my htc dash
Hello, I am stuck with this issue. I tried several roms and uspl but nothing happens. I installed 6.0, 6.1 and 6.5 rom versions, no wifi.
I really need help on this since I use this phone to get connected.
Please you can write me so I can see what I have to do to fix this wifi problem.
[email protected]
thanks!
my friend has this same problem it was an easy fix he wasnt running the batch file, are you sure your flashing right?
Bupahs,
Can you please help. I have read this several time and still no luck with WiFi driver. Mine still says driver not loaded. I am new and jus can not figure it out. I have flashed Ookba's 6.5 several time along with the patch.
Thanks
HEEy the same for me, pleas help us!
and microWlan doesn't work in any Roms i tested...
Bupahs said:
wifiinit.lnk must be in the windows startup folder, or the drivers wont load this has been covered and a forum search would have shown you that
Click to expand...
Click to collapse
yes this worked! thank you. i accidentally deleted it when trying to increase startup times. putting this file back in the startup folder got my wifi up and running again. tnx again.
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
its in one of your phone/device settings to let u download and install apps or cabs not digitally signed. thats all, i believe. just find it and check it off. or look for advanced config cab if u can find it and install that. it has an option in there also to let u download/install whatever..
mullethunter said:
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
Click to expand...
Click to collapse
The cab I have attached may help you...it's some SDK certificates that will allow installation of certain unsigned apps, but I don't know if this is what the ones you're running are requiring and missing. It won't harm anything to try this one, and you can easily uninstall it if it doesn't do the trick
Thanks guys. Sirphunkee - that cab actually installed, but I'm having the same problem. Another forum has suggested that I take the device back to T-Mobile, but it just seems like there's a setting that's not right in the OS. Demandarin - I've looked for various security permissions in the UI with no luck. I've mucked around with some Policy values in the registry per some threads on this forum, but still nothing.
I'll keep trying, and thanks.
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
mullethunter said:
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
Click to expand...
Click to collapse
Have you already installed .Net 3.5? It's a framework that many other programs use (and need) to install, and it's not on the TP2 by default...it's the only other think I could think of that would keep you from installing stuff. Cab is attached, if you don't have it already.
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
mullethunter said:
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
Click to expand...
Click to collapse
Well yeah what's weird is that I never had to use that to get any of those apps installed