Hi,
I unlocked my MDA Vario with the tool which can be found on this forum.
At first everything seemed to be OK for one or two days. It accepted my "Base-simcard" and I could use the phone-function.
Since yesterday I frequently get a message which says there is no or a wrong or sim card inserted.
When I remove the sim card, replace it and start the Vario, everything works again.
Sometimes I just have to put the wizard off and on again and it's ok again.
This happened already a few times...
Does anyone know what causes this problem?
Is it possible that the unlocking tool doesn't do the job 100% right?
Or maybe T-Mobile inserted an extra check for non-T-Mobile sim cards in the ROM part?
Best regards,
Stoffel
I am planning on purchasing an MDA Vario on T-Mobile UK, however I need to use it on Vodafone UK.
I want to unlock the phone with least risk of causing any problems, or bricks as I see it more commonly termed as in this forum.
Is there a simple tool which does SIM unlock and nothing more and is it safe ? I was thinking lokiwiz version 0.1 might do that ?
Will all the new MDA Vario come with the G4 chip ? or is luck of the draw.
Please please can someone shed some light.
surely someone has done this, please please help me
I have done a straight unlock and it went fine to qtek 9100 firmware...
But:
Email and other funtions didnt work properly
Phone crashed alot
Finally the back light failed.
So about 10 minutes ago i switched back to the T-Mobile firmware.
Now everything is working perfectly and the new OS looks very nice too.
below24,
straight unlock ? -- what tool did you use to unlock ?
new OS ? -- do u mean the latest offcial T-mobile ROM ?
appreciate your input
Yes the Latest T-Mobile ROM, its from their site.
Well i have to use a piece of sortware found here, to unlock the lock on the phone so i could first flash it and that also unlocked it.
Then immediately debranded it to the Qtek 9100 ROM, which made the Device run slower (than the T-mobile one)
Not sure what it was called though probably the lokiwiz version 0.1, that was the one. Very easy and straight forward...
G4 chip MDA Vario unlocked
Got my vario today locked to T-mobile UK. And yes it was a G4 chip.
IPP/SPL - 2.21.0001
OS - 2.24.2.6
I had no t-mobile SIM so stuck my vodafone SIM in, first asks for my personal SIM password, then it asks for unlock code.
At this point I ran lokiwiz03a, which ran but never gave me unlock code, mentioned something about not being able to copy some file and it might be in use.
So I copied EnableRapi.cab to my phone and ran EnableRapi.cab from File Explorer, that went fine (message about overwrite, said yes)
Then I ran LockiwizMsl.bat from desktop while being connected to ActiveSync and there it was the unlock code.
Entered worked fine.
As regards the ROM upgrade, my main reason was to lose all t-mobile crap, but found an easier way with ZERO risk:
First time ever you startup phone it does inital setup, the last step it beings to do an install, as soon as the install starts pull the battery out, then reboot. (Important to have the battery cover off already)
On reboot you should be able to go into the phone no setup screens this time, also ZERO customizations, yes means you need to do all the GPRS, MMS etc etc setting yourself, but that I am happy to do.
Hope this helps someone.
forgot main thing, used lokiwiz03a, thanks to machinagod.
Good, im glad i could have been of assistance.
good luck in the future with it.
but the pulling out of the battery im not too sure about... :shock:
I agree pulling battery out sounds crazy, I remember reading it in a forum, thought it would never work myself, since it was a new phone i could always return in 7 days, so thought what the hell, let me try it out.
Been running one day, and everything works fine, phone is fine, wi-fi working, bluetooth and GPS, so far so good.
Trying some tweak programs now
Loving my MDA, why did i not get one sooner.
Thats what i thought, the Vario is very good, but i still think its a little on the large side and not as fast as it can be... I am really waiting for the tytn.
I have found that the firmware from T-mobile is pretty stable and has a quicker startup than the qtek 9100 firmware. however this may not be the case with everyones mobile, just me!
Could you not just perform a soft reset instead of pulling the battery out?
soft reset - you mean when the install begins ?
really not sure, guess next person can try this out and let us know.
This tool is great, file transfer it to your MDA then just click on it, it will unlock your phone to all networks, I tried it on my MDA Vario with T-mobile for an o2 sim and it works great no issues, I can use GPRS, MMS, Call waiting etc
...yes, soft reset while device installs works (of course I made a full backup with SPB-backup first)...
straight forward unlock mda vario
I receiced this logfile while executing
xdadev_all_unlock started
device=WIZA200
could not find security key for device type WIZA200
xdadev_all_unlock failed
I guess mine is already unlocked, ain't it...
straight forward unlock mda vario
I receiced this logfile while executing:
xdadev_all_unlock started
device=WIZA200
could not find security key for device type WIZA200
xdadev_all_unlock failed
I guess mine is already unlocked, ain't it...
best way to tell is to put different provider sim in there and turn it on.
I've just tried updating my O2 Orbit ROM to Black&Bluev3 and now can't use it on the O2 network. The SIM is working fine at the moment in my old Hermes
everything seemed to have gone fine, (I ran USPL first) but after restarting the phone won't recognise the sim - before I even had a chance to enter the pin 3 times it reported that it required the unlocking code, and then refused to accept the unlocking code once I'd got that.
So now I've got a very sleek PDA, but no phone Any idea where I can get an O2 ROM from as I can't see it listed in the Artemis list, and am I looking for a ROM or extended ROM (what is the difference anyway?)
see the full story at:
http://forum.xda-developers.com/showthread.php?p=1361727#post1361727
strongp said:
I've just tried updating my O2 Orbit ROM to Black&Bluev3 and now can't use it on the O2 network. The SIM is working fine at the moment in my old Hermes
everything seemed to have gone fine, (I ran USPL first) but after restarting the phone won't recognise the sim - before I even had a chance to enter the pin 3 times it reported that it required the unlocking code, and then refused to accept the unlocking code once I'd got that.
So now I've got a very sleek PDA, but no phone Any idea where I can get an O2 ROM from as I can't see it listed in the Artemis list, and am I looking for a ROM or extended ROM (what is the difference anyway?)
see the full story at:
http://forum.xda-developers.com/showthread.php?p=1361727#post1361727
Click to expand...
Click to collapse
it would be the rom mate.
Question as I have O2 orbit too and uk based.
have you tried reflashing phone not forgetting to do the USPL again first.
I had a problem where mine seemed to freeze up when I upgraded one of our and by doing this it worked fine.
worth a try what have you got to loose.
If all else fails they claim that O2 uk are goinmg to release this month but thats a way off.
Try the reinsall. BUT DONT FORGET USPL first
Hmmm.... false alarm methinks - after an hour or so the same unblocking message came up on the vario - I swapped it back and it worked first time in the new ROM imaged Orbit - so it was probably a SIM issue. BTW it seems there are no UK ROM images available for O2...
Yes there are uk o2 roms - see stickies in artemis upgrading and artemis mobile 6 forums.
you've got to laugh - why can't they just release it into tehpublic domain in the first place - it's not like anybody is going to CHOOSE and O2 ROM unless it's for a bet....
Anyway - hats off to step0011 and well done to the community - we win again!
Hey everyone, I'm new here so thank you all in advance for the Help.
I've recently acquired an HTC Diamond GSM phone. I live here in America and the phone was regionalized on a french carrier so I began my search on how to flash the firmware, thus ,hopefully, unlocking it. I stumbled across this site and after hours of reading the forums I was ready to try the three step process described on the [TUT] tutorial. I upgraded to Olinex 1.40 SPL, that worked flawlessly. Then I upgraded the radio to 1.0.25.23, worked. Finally I updated the ROM to DIAMING Ultimate xxxx I know its based off the 2.0.3 official. That also worked great. Mind you I was doing all this without a sim in the phone. Now it was time to put my SIM in the phone and get started right?
*** Side note*** My previos phone was a Sony Ericcson w810i that I also needed to flash/unlock. My SIM has worked perfectly in this phone for 2-3 years.
When I boot up the phone with my SIM in it get all the way to the Windows Mobile Desktop when it pops up with "Network Locked, Please Enter Unlock Code," or something to that effect. I went to my ATT account website and got a PUK code that supposedly unlocks your SIM for you, however I entered it twice and it didn't work. (I was told 10 straight failure locks your SIM permanently So i dind't go any further).
Basically I'd like to know what I've done wrong, or is there something I'm not understanding. Thanks again
Your phone is locked
So you bought a phone on ebay or something and it's locked to a carrier != your carrier. Flashing the ROM/Radio will not unlock the phone. You need to get an unlocker. I think Olinex? The guy who wrote the HardSPL that you used in the first step of the tutorial sells one for a good price. Contact him. I think there is/was a sticky thread in here or the General Diamond that specifically states this and who to contact.
Hi all
Ok I have searched around the internet and the problem I have is my settings for internet dont save. It just says it did but does not. Resetted the phone cleared it and no joy. O2 have said they cant send a text message to update the phone i am not sure why. I have read that this happens with o2 sometimes and cant find a solution. The GSM works fine but not the 4g.
I can put my other sim card in like vodafone and EE, it works fine. Anyhow it's on android 7 and the last thing I want to try is put stock android but I don't know how to do that as it might be glitch on the android system files.
The problem is strange as it only does this with o2 but not with other sim cards as you don't need to go and manually put internet settings in. Even if you did manually put it in does the same thing... as it says saved and then does not.
I have updated a samsung with Odin and a guide off sammobiles site but not sure what the HTC secondary official site is, as I want the original rom and how to install it.
Any help would be nice.
Thanks
When you insert the sim card you should get prompted for O2 payg or O2 monthly etc.. If you don't get a prompt then it could be a simcard issue. Does the O2 sim work as it should in any other device?
Beamed in by telepathy.
Stock roms can be found (together with flashing instructions) in the ReadMe thread. Take a look at the RUU section of the thread.