Hi,
I wanted to flash a new ROM on my Trinity. But I receive an error 262 and then the device is locked in Bootloader mode. To solve the problem I have to flash the original ROM.
What is the problem. Why can't I falsh the ROM? I worked before ....
Thanks
Reza
I belive I got similar problem when tried to flash ROM for P3600i to my P3600.. Seems they are not compatible ... But I'm not sure .
Related
Hi, my question is : how can i unlock my phone when i have only access to the bootloader.
My phone freezes on second splash screen and i can't put a new firmware cause it's locked (294 invalid vender id). Thanks a lot. ++
not that i know of
also vendor id have nothing to do with sim lock
kinda trikcy for people to help you when you give no info about
what device or rom you use or try to use
the flash exe often comes in versions with _noID.exe in the end thats a good step on the path to flashing with a rom by another operator
Hi, I've got an HTC Mteor mobile phone
I had Firmware 1.32 and i tried to upgrade with 1.34. But firstly i must upgrade the SPL by v1.09. After that i tried to upgrade with 1.34 and i have always the same error : 294 Invalid vender ID.
I tried several roms (1.13, 1.32, 1.34) and i have always the same problem.
I tried also to upgrade the phone by putting the rom on my SD card (BREEIMG.nbh) but it doesn't work (error : not allow).
I don't know what to do. Thanks a lot for your help. ++
Hi, does anyone have an idea about my problem ? Thanks a lot. ++
Hi, nobody can help me ? My mteor isn't working anymore. Please help !
Hello All,
I think I lost my HTC Trinity P3600 device :-( I was trying to update INDIGO_LITE & upgrade failed during half way and I rebooted the device & now it only boot to white screen. If I try to reload another rom it's keep saying rom is corrupted.
Any help will be really appricated
Thanks,
Ankito
k a few questions for you..
1) did you have hard-spl installed?
2) can you enter bootloader manually?
3) have you tried to flash an official ROM from you manufacturer? (WM5 or something)
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
ankitoberoi said:
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
Click to expand...
Click to collapse
Hello,
http://www.smartmobility.nl/_BIN/TRI_DT_WWE_1234052_103_6275_1380011_108_Ship.zip
Bye
so it's an HTC product? look at the wiki, or logon to HTC's website to download the latest ROM for your device and region (europe, asia, etc).
What i meant was did you have hard-spl installed before you flashed, but i'm guessing not since you have the new bootloader. You really need to read up and protect your device before you flash.
Try to find an official ROM and see if that works first..
Thx jotam
Phone start working again. Do you guys recommand any 6.0 rom which I should use? Should I wait for HTC to come up with offical rom?
Thanks,
Ankit Oberoi
htc has official rom already.. just try and see what you like, but pdaviet and indigo are good for me.
make sure you have hard spl installed before you flash again. You can follow the guides here if in doubt.
I'm a bit confused here I have managed to flash my o2 orbit from the factory o2 wm6 to wm6 premium plus rom, everything worked fine. Then I tried to flash to black & blue 4.3, I got a 302 error, I went through the recovery process and the same happened again. I managed to get the factory rom from the o2 website and it flashes fine every time but whenever I try to flash with any other rom even the premium plus which worked before, I get the 302 error, do I need to CID Unlock it? I'm stuck, Any help would be much appreciated.
lj-_- said:
I'm a bit confused here I have managed to flash my o2 orbit from the factory o2 wm6 to wm6 premium plus rom, everything worked fine. Then I tried to flash to black & blue 4.3, I got a 302 error, I went through the recovery process and the same happened again. I managed to get the factory rom from the o2 website and it flashes fine every time but whenever I try to flash with any other rom even the premium plus which worked before, I get the 302 error, do I need to CID Unlock it? I'm stuck, Any help would be much appreciated.
Click to expand...
Click to collapse
You must run USPL to flash other ROM than your original. If you flash other roms than supplied with your device, you must CID unlock your bootloader and then will be everything fine.
This is why I am confused, how come the wm6 premium plus rom worked first time and now it dosn't . I use the uspl utility first like I did the first time, the spl then changes to 1.11.0000, then I do the rom update. I didn't do a cid unlock the first time but it worked. My brother has the same o2 xda and has also updated to the wm6 premium plus rom from the factory rom, but never did a cid unlock either.
Yes it is a bit strange, but you have to try use the uspl tool again and again, in some version of uspl i hade succes on 5. try. Or look for other version of USPL, maybe you have the old one.
True, I'll try another uspl. How can I tell if it's a new one? I take it I'm doing the procedure correctly ( Run USPL once, then reset, then install rom) ? or run uspl more than once ?
No, run just once, if succesfull the device will reboot, wait untill the activesync will connect to your device and than run romupdate.When possible after the reboot turn to fly mode and wait till activesync will be syncronised with the device and this time run the update.
Thanks for the help mate, I'll keep on trying that
about uspl
hey wat is uspl and from where u can download this utility for wizard ! i m having the same 302 error while flashing a crossbow rom , active sync dont detect my fone now its been bricked n stuked on bootloader screen ! plz help
z0d1ak said:
hey wat is uspl and from where u can download this utility for wizard ! i m having the same 302 error while flashing a crossbow rom , active sync dont detect my fone now its been bricked n stuked on bootloader screen ! plz help
Click to expand...
Click to collapse
Try to search the forum, you will find the uspl tool. If you see the color screen, you can flash just your original rom version.
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Please...
Does someone can help me?
it seems my problem can come from vista drivers. I foud a topic :
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
But even folowing the instructions my update is still locked at 0% and tells me an error 262.
I ve done the whole instructions and installed the old driver but no matters. Somebody knows a way to solve my problem?
cdfr31 said:
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Click to expand...
Click to collapse
Using signed Hard-SPL?
Use this this to flash your radio : http://htcroms.aplace4u.biz/signed/radio/Diamond_Radio_1.00.25.05.rar
Hi Corian,
Thnaks to you I ve finaly flashed my radio!
Your trick was the good one.
Now I am trying to install a new rom casue i dont like the 0.95 bepe elite.
I have exactly the same problem with every flash i am attempting. It stays at 0% and tells me a 262 error.
My SPL is olinex 1.30.
Could you tell me whats the best and if you can give me the link to download the good files.
I d like to install an official HTC Rom and maybe for this i have to change the SPL?
Thanks for your great help.
HI,
Finally I have solved all py problems.
The problem was coming from the hard SPL I had installed.
I ve managed to change the hard spl which wasn t possible. I had to force the mode bootloadrer and then the hard spl was flashed and replaced by 1.40 Olinex unsigned.
Then I flashed rom and radio and splash screen without any problem.
In fact the whole thing about drvier Vista wasn t the problem I think.
Thanks to Corian who helped me to identify the source of the problem : incompatibility with hard spl taking only signed things.
Hi!
I have some problem with the pda.
I have hspl on it. 1.93 Olinex, and a clear winmo 6.1 with no tf3d.
I just wanted to install this rom:
Gen.Y D2 R5.5[WM6.1 21056][UC][SENSE2.1][
http://forum.xda-developers.com/showthread.php?t=521941
In this thread they say this is the recommended radio rom for this rom:
"GSM Diamond Radio 1.13.25.24•RapidShare
•MegaUpload
•MediaFire
* This is an original Diamond Radio, no security unlock needed!"
ok. So I sarted the radio rom install with costumRUU. And when it gets to 100% the costumRUU stoped with rom flash error.
then later i find this thread:
http://forum.xda-developers.com/showthread.php?t=470306
this thrad says:
"Your phone has to be SECURITY UNLOCKED (WHICH IS NOT THE SAME AS SIM-UNLOCKED!!!)
Radio v1.13.25.24 (Blackstone) (SU) (Quad Band)(NEW) "
So. My pda wont start. when i start it, it goes to the booatloader screen and there is "rom flash error" text. And i cant reach the internal storage.
i ve tryed to install the stock rom but the instal stops at 13% with rom flash error 226.
i dont know what to do... can somebody help me?
Is the official rom same as the one you are able to download via the HTC official site using the serial number under the battery of your device...
Hi!
A few weeks ago the problem was the same. You tryed to help me, remember?
only the stock htc service could made it.
you gave me the link to my stock rom anno.
I cant flash the stock rom. Are there any rom with radio? Or just the stock rom has radio?