new project: modify the HR buttons (plz check it out) - Touch Diamond, MDA Compact IV ROM Development

so...my idea goes like this...
1.what is the first thing u think of after your device got lost\stolen??
W.I.M.P (or any other anti theft program)
2.what is the second thing u think of???
what if the person who found\stole my device performed HR(?!)..
ok so what i was thinking of is having a way to change\modify the buttons sequence (witch every body knows) to perform HR so it will be like your own locking code..
****************
another thing that have to be done in order to prevent unwanted HR is to change the "1234" numbers u r being asked to enter when trying HR from the software to a personal code...
****************
unfortunately..i dont have this kind of tools and knowledge to do it so i'm asking u guys...
plz check it out !! it will upgrade the whole security issue...

Well there is also a thing like Clear Storage under the settings page wich also does a hard reset.

u missed the point..i'm not looking for another ways to HR....

no, but a thief can use that instead.
Or upload a program to do a HR.
Best thing to do is to bake WIMP in your ROM so it will be active after a HR. And get a sort of 'own signed' HardSPL so your thief can not flash it.
But I think he could flash the HardSPL, anyway, i think not many thieves come that far

good point !
but where is this coded ?
it must be before device loads bootloader ?! and if so - this is then hardcoded on the mb ... which maybe a bit tricky to change..
but i am sure we do have some more into deep guys on board .. so why not give it a try .. and brick another device ;-)

I think olinex can fix a way to 'sign' a rom with your code, so the hardspl can only flash roms that are signed with YOUR code. Building those roms is not very hard from existing ones I guess.
I am only curious, if the device can be locked in that way so no SPL can be changed (without password/right code/right SPL rom). I don't think that is possible.
Building a functional ROM with antitheft program full running is not hard.
Also make sure, the antitheft program can't be killed by advanced taskmanagers.
At first, it should stay invisible.
But, unless an XDA-noob steals your phone, don't be worried. Just a hard-reset surviving should be enough for 99% of the thieves. No 'simple' thief will know about reflashing and SPL

This looks promising! keep up the ideas!!!
YOu might want to look at this: http://www.pocketpc-live.com/pocketpc-softwares/ultimate-theft-alert-v3-for-pocket-pcs.html
i know it does not do what yo want, but i thought you may find it interesting because if there is some type of security development the messaging and locking features from her are very nice.

how hard will it be to take the official 1.93.456.2 rom and add W.I.M.P to it by cooking???
any links for a guide plz?

Maybe you can try cooking Ultimate Theft Alert v35! into it. Already guides are there which can me modified for diamond. Look here and here.
Regards,
Carty..

Carty said:
Maybe you can try cooking Ultimate Theft Alert v35! into it. Already guides are there which can me modified for diamond. Look here and here.
Regards,
Carty..
Click to expand...
Click to collapse
wow read all of that seems pretty freaking neet

Thanks
Regards,
Carty..

I'm not a programmer....
but i think it's simple.. should go something like this:
Code:
if (diamond.stolen) ;
then do "change HR combination" ;
for i in buttons do
buttons.change;
end

i wish i had known more about it and have the guts to try it

ok....i was thinking about it while showering...
when u do "clear storage" u r being asked to enter "1234" to confirm...
all we need to do is change it too....
now...if we change the HR buttons sequence and the numbers to enter for HR from the software......what other way to HR u can use????
i think this is the best solution...

anyone know how to do it?

Related

Black 3G Dialer & where is the shadow site??

I am getting ready for people to flame me but i am going to ask this anyway, where has the site that hosted the black ROMS? i need the 3G dialer Jasjamming has released. Is it possible someone has it and could post a link up here.
There is something wrong with the shadow site
http://www.4winmobile.com/forums/portal.php
can someone please tell me what the problem is!! when i try to log in i get told i need to download and install a piece of software which i have done but i still cant get into the site, i cant even ask a moderator from that site to help coz i cant see the site!!!
Help & thanks in advance
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
mrvanx said:
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
Click to expand...
Click to collapse
thanks for the advice, can you tell me how i can get to the site mentioned on my previous post? i dnt know how im ment to configure that zend software (also i dont think i hav a webserver(?!?) and im guessing you will know what to do!!
thanks again
P.S. your guides have saved my skin so many times!! (Got my first TYTN recently, ur guide helped me get rid of WM5!!) good work
dude...dont worry about the zend thing....the forum is down and it is a message for the web administrator...the zend engine is part of php.
The site is back up now
Here's the dialer that JJ posted earlier...
"Black Shadow Video Dial CONFIGURATION
For those of you who want Video Dial Capabilities on your Black Shadows you need to install the following:
BACKUP FIRST!!!!!
1. Install Part1.CAB then Soft Reset
2. Install Part2.CAB DONT Soft Reset (press cancel after it is installed --> then go to the next step)
3. Install Part3.CAB then Soft Reset
YOU MUST FOLLOW THE ABOVE EXACTLY TO THE LETTER OTHERWISE IT WONT WORK.
> DOWNLOAD HERE <
Once the above procedure is completed, it takes around 2mb of storage space.
This video dialer is the one found on Black Dymond 3.5 and the benefit is that I have made it compatable with
zombie skins. You can customize your dialer skins by visiting: http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=513
(Note: uninstalling the zombie skins may cause your video button to dissapear therefore to change your zombie skin, just reinstall another)
Once you have successfuly installed the 3g Video DIaler, the "3G Video Dialer" functionality
in Pimp my Black v0.2 works, hence you can enable and disable the 3g Video Dialer (but the non-video dialer
is the basic WM6 one)
Apologies for taking long on this, I was actually trying to port a dialer that matches the current NON-VIDEO one in the Shadow.
This was unsuccessful due to complication with incompatable DLL's for video telephony etc.
NOTE: Once you have completed this procedure you will permanently lose (well until you HR) the DEFAULT SHADOW big-button dialer in your PPC.
Thanks and Best Regards
JJ"
http://www.megaupload.com/?d=P2EK9VR5
thanks guys, i thought there was something wrong with my comp, it did say on the link last night that new software was needed n i jus assumed is was needed by me. anyway it works now.
also to ronfin44 thanks for the links and install instructions, i didnt realize it got rid of the big button dialer, do you think there is any way to just add a another button to the dialer and shrink the font size of the number output?
thanks again
i wonder if someone could edit the retouched wizard dialer available on this site?
megaupload is not working here.. can you please upload at rapidshare?
Here ya go. Try this link. It's the origianl thread JJ posted for it at win4mobile.
http://www.4winmobile.com/forums/hermes-black-rom-support/9975-video-dialer-4-shadow.html
just realized this is one app i cant use. anybody knows how i would be able to uninstall this? will deleting the .cab files uninstall it?
thanks
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
agovinoveritas said:
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
Click to expand...
Click to collapse
i have successfully installed the 3g dialer. i did say i just realized i have no use for the app thats why i was asking how, if possible would i be able to uninstall it. no problem if i cant coz i know ill be HR anyways when i try out another rom. thanks for the reply.

The censured file for SimLockTool_Artemis_Excalibur

I don't want to bother anybody, but I believe in the FREEDOM -with capital letters-, and I think that Liberty is the best strenght you could have. So, why not let the opportunity to give people the power in theirs hands?.
I do not know if the programm actually works, I do not have time to try it but it seems to me that someone has attempted to make money through this application. And to prevent an unwantwed use I have resolute to share with all the community.
Best Regards
http://rapidshare.com/files/45997746/SimLockTool_Artemis_Excalibur.rar.html
Looks pretty interesting ... for Developers
But to me =>
anyway thanks for the Tip
Rocheau said:
I don't want to bother anybody, but I believe in the FREEDOM -with capital letters-, and I think that Liberty is the best strenght you could have.
Click to expand...
Click to collapse
totally agree on that
thanks for posting
some of us from "artemis" thread in the "artemis upgrading" topic have tried this app, but none of us had had any success so far.
this utility require specific htc card in order to boot image.
even it boots, utility won't work. error message Init Decoder Failed
might be some confusion with codes (didn't have time to study)
rem: utility will not boot even from htc card if you have USPL installed, it must be original SPL on your device.
regards,

Rom with built-in anti-theft program

Hi. My phone was stolen a few days ago , and this made me think of the following: anti-theft programs are usually useless, cause often thieves perform a hard reset which deletes it. But what if the anti theft program is on the ROM?
So the question is: is there any not too difficult way to integrate an anti-theft program on a custom ROM? Of course it must also be pre-configured.
Please note that I have no knowledge of preparing ROMs, so if there is a tutorial around I would need it to be linked here.
Thanks!
I've built RemoteTracker into my ROMs since it was a tiny project... It's a great idea to do so, so he made some tools to automatically have your settings when a hard reset it preformed. What device do you have? You could possibly just build your own ROM and include this, instead of waiting on others to do it for you
You could possibly just build your own ROM and include this, instead of waiting on others to do it for you
Click to expand...
Click to collapse
That's why I am asking how to do it and not which ROM to install. Is there any tutorial for cooking a ROM available?
Well, I had a Touch Cruise, and unless I get it back (still possible - there were owner information), but I'm not sure yet about its successor. It may be a Touch Diamond.

Tilt 2, can I get Manila 2.5?

Hay guys, let me just say im complete newb at all this phone stuff unforchunalty. I dont know anything about this stuff so im asking for your help please. Ok, i want to get the upgraded HTC tf3d on my AT&T titl 2. I'm sick of the blue AT&T blue. Is it possible to get Max Manila 2.5, (I think that whats it called) for my phone? I dont know how to dl it onto my phone, or aanything. So please if any of you guys can help id be very thankful. Note, I dont know how to unlock or flash my rom, I dont even know what that mean but i see them alot. Thank guys.
Welcome to forums
yes you can have Manila 2.5
Have a deep read here to learn how to flash:
http://forum.xda-developers.com/showthread.php?t=550540
Then select the ROM of your preference on the Rhodium section
Read, Search, Respect and Emjoy!
Good luck,
And don't forget to vote for Rhodium!!
Hay thx orb3000!
Since you are newbi I recommend the Energy
To have most of the work done for you check out:
http://forum.xda-developers.com/showthread.php?t=562773
I am running NRGz 21855 Dec 31st Standard build and it is pretty sweet. A few bugs but it is still nice. NRG also puts out another TP2 ROM which is less than bleeding edge but more stable codenamed Pheonix. Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Omg kroniced thank you to for repling, Im having a hard time with this, there is a good chance im going to be asking for help. Thanks alot for the link man, I really mean it.
kroniced said:
Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Click to expand...
Click to collapse
Wait, what?
As in, Touch Flo 3D 2.8? As in a new version over Sense UI 2.5, already found on Leo & custom roms for other devices?
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
theherofromdoom said:
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
Click to expand...
Click to collapse
So what exactly happens when you run Rhodium-HardSPL_V2_00R3.EXE? Is it a connection error, a program error, a device error? If you have a Tilt2, you probably need to install this to your device before you run the executable. BTW, you're not backing up your device with HardSPL, you're replacing the stock, HTC bootloader with a patched bootloader, a process which you only need to do once. It's also not necessary to back up your device before flashing a new ROM, it's just recommended if you have important stuff saved to main memory, since you lose all the data on your device each time you flash. You will not lose data when installing HardSPL with this executable.
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
theherofromdoom said:
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
Click to expand...
Click to collapse
A .cab is an installer, just like an EXE or MSI on a desktop computer. Don't uncompress it, just put the .cab file as is onto your device, disconnect your device from the computer, browse to wherever you put it with File Explorer Mobile, and open it. Install it to internal memory and you're done. Also, try disabling your Antivirus/Firewall and ensure you have Windows Mobile Device Center (Vista/7) or ActiveSync (XP and lower). And no offence, but you might want to hold off on flashing for a little while, at least until you get a bit more acquainted with Windows Mobile. I recommend that everyone who flashes their device at least understand the technical aspects, since that highly reduces chances of bricking as an end result.
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Get accustomed to you phone by doing the minor cabs and tweaks found here:
http://forum.xda-developers.com/showthread.php?t=524655
Most of this stuff is harmless and will get you use to using cabs and changing things on your phone.
theherofromdoom said:
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Click to expand...
Click to collapse
No, that .cab enables RAPI (Remote API) on the Tilt2, which allows programs like the HardSPL unlocker, on the PC, to control the device to an extent, which it needs to do in order to flash HardSPL.
Hi, How can I get the actual version of manila running on my Tilt 2
Thanks
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
sirphunkee said:
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
Click to expand...
Click to collapse
minor correction: HKLM\Software\HTC\Manila\Version
On the stock Tilt2, the version is 2.1.19183217.0
Note that this can also be seen by looking at the About section of the Settings tab in TF3D.
This is awsome DaveTheTytnIIGuy, the programe you sent me worked. I was suscussfully able to flash my HardSPL, with Rhodium-HardSPL_V2_00R3. Thank you. So now I'm up to the next step witch is finding a ROM.
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
raveztaylor said:
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
Click to expand...
Click to collapse
The only way to get a different version of Manila is to change ROMs. If you're using the stock ROM, you'll need to switch to a cooked ROM to get one of the newer versions of Manila.

[Ask Your Questions Here] Questions And Answers for Vogue Users

All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
egzthunder1 said:
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
Click to expand...
Click to collapse
GOOD IDEA!
Hi there Gents any input
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
Did you install the CDMA home weather fix?
joshmxpx said:
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?t=628353
Good luck!
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
As far as WMP, Barogi will have to look into it since it is his rom.
One last thing, please do not double post. Thanks for understanding...
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
AaronNZ said:
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
Click to expand...
Click to collapse
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Question from motoyola
motoyola said:
Help guys, I have a Sprint vogue that was flashed before. It was CID unlocked and has custom ROM on it. My cousin was the one using it then he returned it to me at this state. Problem is the phone does not have any radio. So i tried to bootload it and flash it with a radio but it does not accept it . It's now CID locked.
VOGU100 MFG
SPL-2.01.1000
CPLD-3
I tried to flash it with an OEM ROM, Sprint, USC, Alltel, telus, Bell, VZW nothing seems to work. is there any way to ICD unlock this? so i could flash it with an OEM rom. Thanks.
Click to expand...
Click to collapse
Look in my signature. There is a guide for unlocking as well as superCID unlock the device. Let me know if you need help.
egzthunder1 said:
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Click to expand...
Click to collapse
Thanks, that link is broken, but I found it here (along with some other handy things)
http://www.webcoast.net/temp/
i just flash my vogue with the latest NFSFAN rom. can someone tell me the setting to get my gps to work? whenever i start googlemap it keeps on trying to connect through the data connection. (i did do that one step that NFSFAN asked for the gps dL that verizon cab)
Question from mac+htc
mac+htc said:
Hey everyone,
So I was running NSFANS 6.5 ROM on my device (Amazing ROM btw) But I needed to revert back to the stock rom. I used the VZW updater to go back to the stock rom and I changed the esn on line. When I dialed the *228 and choose option 1 I got a failed message. So I called customer support and he walked me through a manual programing. Well that got voice working but when I went to use the data it wouldn't work. I made sure all the network settings were right, and I still couldn't connect. Well then I hard reset the device and now I am back to square 1. No voice no data. Is this something from NSFANS rom that is messing the phone up? I don't want to call again because their tech support takes forever and I am afraid they are just going to tell me to take the phone into the store. Thanks in advance!
Click to expand...
Click to collapse
Why did you change the E$N? Where you using the device in a different carrier?
Back to your problem. Your EPST settings should survive a hard reset as those are parameters that are not stored in Windows (afaik). It really makes not difference which rom you are using (at least for Voice and SMS).
Lets focus on your main phone's capabilities first. If your EPST settings truly got lost, you will need to get them from Verizon again. The main ones are the MSD and MIN. Make sure that you write them down this time as you will need them again if they go bye bye.
As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)
Do that and let me know if this works. They will have to program this for you this time, but once you have the values that I mentioned before, you will be able to do it yourself.
Question from pasdabeer
pasdabeer said:
I have android 2.1 currently on my vx6900, Id like to go back to close to stock Rom, but without all the verizon carrier "flavorings" and rescrictions.
Any ideas? Personaly I liked the simple clean useage of win 6.0 without all the extra graphics ( besides the HTC home plug in and the touch flo )
thanks in advance.
Click to expand...
Click to collapse
Try to get Barogi's latest "lite" rom. Also, you can't go wrong with vin's 28014 or NFSFan's rom. I would recommend mine, but I think they might be a little heavy for what you want. Good luck.
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
pasdabeer said:
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
Click to expand...
Click to collapse
Try to avoid stock if you can... it has a bad tendency of being too heavy on the extra apps.
I checked out just SS's of both. Both look awesome, but theres something about the simple look ( or im just used to it since my 8125 ) of the stock look. I would like to have the look but the added memory of a cooked rom.
With NSFSfans, could you remove the today screen plug ins to get back to a more stock look?
Im runnin 2.1 android eclair at the moment, and im barley pulling a full day battery with no data/bluetooth. With the old winmo, I was getting 2.5 days-3days. Thats another main concern for me.
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
pasdabeer said:
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
Click to expand...
Click to collapse
Which one are you looking for?
egzthunder1 said:
...As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)...
Click to expand...
Click to collapse
Verizon is [email protected]

Categories

Resources