I am getting ready for people to flame me but i am going to ask this anyway, where has the site that hosted the black ROMS? i need the 3G dialer Jasjamming has released. Is it possible someone has it and could post a link up here.
There is something wrong with the shadow site
http://www.4winmobile.com/forums/portal.php
can someone please tell me what the problem is!! when i try to log in i get told i need to download and install a piece of software which i have done but i still cant get into the site, i cant even ask a moderator from that site to help coz i cant see the site!!!
Help & thanks in advance
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
mrvanx said:
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
Click to expand...
Click to collapse
thanks for the advice, can you tell me how i can get to the site mentioned on my previous post? i dnt know how im ment to configure that zend software (also i dont think i hav a webserver(?!?) and im guessing you will know what to do!!
thanks again
P.S. your guides have saved my skin so many times!! (Got my first TYTN recently, ur guide helped me get rid of WM5!!) good work
dude...dont worry about the zend thing....the forum is down and it is a message for the web administrator...the zend engine is part of php.
The site is back up now
Here's the dialer that JJ posted earlier...
"Black Shadow Video Dial CONFIGURATION
For those of you who want Video Dial Capabilities on your Black Shadows you need to install the following:
BACKUP FIRST!!!!!
1. Install Part1.CAB then Soft Reset
2. Install Part2.CAB DONT Soft Reset (press cancel after it is installed --> then go to the next step)
3. Install Part3.CAB then Soft Reset
YOU MUST FOLLOW THE ABOVE EXACTLY TO THE LETTER OTHERWISE IT WONT WORK.
> DOWNLOAD HERE <
Once the above procedure is completed, it takes around 2mb of storage space.
This video dialer is the one found on Black Dymond 3.5 and the benefit is that I have made it compatable with
zombie skins. You can customize your dialer skins by visiting: http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=513
(Note: uninstalling the zombie skins may cause your video button to dissapear therefore to change your zombie skin, just reinstall another)
Once you have successfuly installed the 3g Video DIaler, the "3G Video Dialer" functionality
in Pimp my Black v0.2 works, hence you can enable and disable the 3g Video Dialer (but the non-video dialer
is the basic WM6 one)
Apologies for taking long on this, I was actually trying to port a dialer that matches the current NON-VIDEO one in the Shadow.
This was unsuccessful due to complication with incompatable DLL's for video telephony etc.
NOTE: Once you have completed this procedure you will permanently lose (well until you HR) the DEFAULT SHADOW big-button dialer in your PPC.
Thanks and Best Regards
JJ"
http://www.megaupload.com/?d=P2EK9VR5
thanks guys, i thought there was something wrong with my comp, it did say on the link last night that new software was needed n i jus assumed is was needed by me. anyway it works now.
also to ronfin44 thanks for the links and install instructions, i didnt realize it got rid of the big button dialer, do you think there is any way to just add a another button to the dialer and shrink the font size of the number output?
thanks again
i wonder if someone could edit the retouched wizard dialer available on this site?
megaupload is not working here.. can you please upload at rapidshare?
Here ya go. Try this link. It's the origianl thread JJ posted for it at win4mobile.
http://www.4winmobile.com/forums/hermes-black-rom-support/9975-video-dialer-4-shadow.html
just realized this is one app i cant use. anybody knows how i would be able to uninstall this? will deleting the .cab files uninstall it?
thanks
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
agovinoveritas said:
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
Click to expand...
Click to collapse
i have successfully installed the 3g dialer. i did say i just realized i have no use for the app thats why i was asking how, if possible would i be able to uninstall it. no problem if i cant coz i know ill be HR anyways when i try out another rom. thanks for the reply.
Related
Hi,
I know the answer is somewhere in this post, but it has gotten to BIG.
So.. if someone can answer these questions it would be of great help!
I have a 8125 Cingular that I first updated to the zphone 3g blue reptile skin, which I figured out how to mod to make it work just fine.
Then I saw the PaulyA skins and tried those - I first installed the cab at the top of his page. Thats when I lost my SD. So I thought there would be an updated cab to replace it, but all I got was a link to this forumn - If the link is there, I must be blind.
What I need to do is get my SD back - by any means hopefully short of reloading the 8125 from scratch.
Please list a step by step procedure to do this as well as any direct links to files I might need. And any other dialer based docs would also help. I am a developer so I don't think I will have a problem.
Thanks!
Wow... Started in 2006. No response ever since. Hmmm..
Hi guys,
I have an HTC Touch Diamond and need some advice from the pros .
I've never installed any type of theme on my phone, so I need a place to find a theme that gives easy to understand directions for someone that doesn't have much experience with that.
Thanks,
Gavin
You can try iFonz.
It is not a simple theme but a full software for make a PPC similar to iPhone.
You can read info here
Thanks for the link
I'm sorry, but I have another question.
It says I need .net framework? How would I know if I have that? I don't see it in my programs list.
Thanks.
Question on installation of the iphone theme
Hi,
I downloaded the iphone theme got it on my phone and am going thru the install steps. My prob i'm having is on step 5 it says to put the certain file into another I cant figure out how to do this, theres no simple copy/paste or such. Any help would be appreciated
Thanks
if it say overwride a file with another then yes
Nope got no override or such, my phone is a HTC Touch 6900
Please provide more info, what exactly is the step and why is it not working, error?
Hay guys, let me just say im complete newb at all this phone stuff unforchunalty. I dont know anything about this stuff so im asking for your help please. Ok, i want to get the upgraded HTC tf3d on my AT&T titl 2. I'm sick of the blue AT&T blue. Is it possible to get Max Manila 2.5, (I think that whats it called) for my phone? I dont know how to dl it onto my phone, or aanything. So please if any of you guys can help id be very thankful. Note, I dont know how to unlock or flash my rom, I dont even know what that mean but i see them alot. Thank guys.
Welcome to forums
yes you can have Manila 2.5
Have a deep read here to learn how to flash:
http://forum.xda-developers.com/showthread.php?t=550540
Then select the ROM of your preference on the Rhodium section
Read, Search, Respect and Emjoy!
Good luck,
And don't forget to vote for Rhodium!!
Hay thx orb3000!
Since you are newbi I recommend the Energy
To have most of the work done for you check out:
http://forum.xda-developers.com/showthread.php?t=562773
I am running NRGz 21855 Dec 31st Standard build and it is pretty sweet. A few bugs but it is still nice. NRG also puts out another TP2 ROM which is less than bleeding edge but more stable codenamed Pheonix. Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Omg kroniced thank you to for repling, Im having a hard time with this, there is a good chance im going to be asking for help. Thanks alot for the link man, I really mean it.
kroniced said:
Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Click to expand...
Click to collapse
Wait, what?
As in, Touch Flo 3D 2.8? As in a new version over Sense UI 2.5, already found on Leo & custom roms for other devices?
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
theherofromdoom said:
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
Click to expand...
Click to collapse
So what exactly happens when you run Rhodium-HardSPL_V2_00R3.EXE? Is it a connection error, a program error, a device error? If you have a Tilt2, you probably need to install this to your device before you run the executable. BTW, you're not backing up your device with HardSPL, you're replacing the stock, HTC bootloader with a patched bootloader, a process which you only need to do once. It's also not necessary to back up your device before flashing a new ROM, it's just recommended if you have important stuff saved to main memory, since you lose all the data on your device each time you flash. You will not lose data when installing HardSPL with this executable.
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
theherofromdoom said:
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
Click to expand...
Click to collapse
A .cab is an installer, just like an EXE or MSI on a desktop computer. Don't uncompress it, just put the .cab file as is onto your device, disconnect your device from the computer, browse to wherever you put it with File Explorer Mobile, and open it. Install it to internal memory and you're done. Also, try disabling your Antivirus/Firewall and ensure you have Windows Mobile Device Center (Vista/7) or ActiveSync (XP and lower). And no offence, but you might want to hold off on flashing for a little while, at least until you get a bit more acquainted with Windows Mobile. I recommend that everyone who flashes their device at least understand the technical aspects, since that highly reduces chances of bricking as an end result.
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Get accustomed to you phone by doing the minor cabs and tweaks found here:
http://forum.xda-developers.com/showthread.php?t=524655
Most of this stuff is harmless and will get you use to using cabs and changing things on your phone.
theherofromdoom said:
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Click to expand...
Click to collapse
No, that .cab enables RAPI (Remote API) on the Tilt2, which allows programs like the HardSPL unlocker, on the PC, to control the device to an extent, which it needs to do in order to flash HardSPL.
Hi, How can I get the actual version of manila running on my Tilt 2
Thanks
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
sirphunkee said:
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
Click to expand...
Click to collapse
minor correction: HKLM\Software\HTC\Manila\Version
On the stock Tilt2, the version is 2.1.19183217.0
Note that this can also be seen by looking at the About section of the Settings tab in TF3D.
This is awsome DaveTheTytnIIGuy, the programe you sent me worked. I was suscussfully able to flash my HardSPL, with Rhodium-HardSPL_V2_00R3. Thank you. So now I'm up to the next step witch is finding a ROM.
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
raveztaylor said:
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
Click to expand...
Click to collapse
The only way to get a different version of Manila is to change ROMs. If you're using the stock ROM, you'll need to switch to a cooked ROM to get one of the newer versions of Manila.
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
egzthunder1 said:
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
Click to expand...
Click to collapse
GOOD IDEA!
Hi there Gents any input
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
Did you install the CDMA home weather fix?
joshmxpx said:
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?t=628353
Good luck!
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
As far as WMP, Barogi will have to look into it since it is his rom.
One last thing, please do not double post. Thanks for understanding...
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
AaronNZ said:
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
Click to expand...
Click to collapse
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Question from motoyola
motoyola said:
Help guys, I have a Sprint vogue that was flashed before. It was CID unlocked and has custom ROM on it. My cousin was the one using it then he returned it to me at this state. Problem is the phone does not have any radio. So i tried to bootload it and flash it with a radio but it does not accept it . It's now CID locked.
VOGU100 MFG
SPL-2.01.1000
CPLD-3
I tried to flash it with an OEM ROM, Sprint, USC, Alltel, telus, Bell, VZW nothing seems to work. is there any way to ICD unlock this? so i could flash it with an OEM rom. Thanks.
Click to expand...
Click to collapse
Look in my signature. There is a guide for unlocking as well as superCID unlock the device. Let me know if you need help.
egzthunder1 said:
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Click to expand...
Click to collapse
Thanks, that link is broken, but I found it here (along with some other handy things)
http://www.webcoast.net/temp/
i just flash my vogue with the latest NFSFAN rom. can someone tell me the setting to get my gps to work? whenever i start googlemap it keeps on trying to connect through the data connection. (i did do that one step that NFSFAN asked for the gps dL that verizon cab)
Question from mac+htc
mac+htc said:
Hey everyone,
So I was running NSFANS 6.5 ROM on my device (Amazing ROM btw) But I needed to revert back to the stock rom. I used the VZW updater to go back to the stock rom and I changed the esn on line. When I dialed the *228 and choose option 1 I got a failed message. So I called customer support and he walked me through a manual programing. Well that got voice working but when I went to use the data it wouldn't work. I made sure all the network settings were right, and I still couldn't connect. Well then I hard reset the device and now I am back to square 1. No voice no data. Is this something from NSFANS rom that is messing the phone up? I don't want to call again because their tech support takes forever and I am afraid they are just going to tell me to take the phone into the store. Thanks in advance!
Click to expand...
Click to collapse
Why did you change the E$N? Where you using the device in a different carrier?
Back to your problem. Your EPST settings should survive a hard reset as those are parameters that are not stored in Windows (afaik). It really makes not difference which rom you are using (at least for Voice and SMS).
Lets focus on your main phone's capabilities first. If your EPST settings truly got lost, you will need to get them from Verizon again. The main ones are the MSD and MIN. Make sure that you write them down this time as you will need them again if they go bye bye.
As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)
Do that and let me know if this works. They will have to program this for you this time, but once you have the values that I mentioned before, you will be able to do it yourself.
Question from pasdabeer
pasdabeer said:
I have android 2.1 currently on my vx6900, Id like to go back to close to stock Rom, but without all the verizon carrier "flavorings" and rescrictions.
Any ideas? Personaly I liked the simple clean useage of win 6.0 without all the extra graphics ( besides the HTC home plug in and the touch flo )
thanks in advance.
Click to expand...
Click to collapse
Try to get Barogi's latest "lite" rom. Also, you can't go wrong with vin's 28014 or NFSFan's rom. I would recommend mine, but I think they might be a little heavy for what you want. Good luck.
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
pasdabeer said:
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
Click to expand...
Click to collapse
Try to avoid stock if you can... it has a bad tendency of being too heavy on the extra apps.
I checked out just SS's of both. Both look awesome, but theres something about the simple look ( or im just used to it since my 8125 ) of the stock look. I would like to have the look but the added memory of a cooked rom.
With NSFSfans, could you remove the today screen plug ins to get back to a more stock look?
Im runnin 2.1 android eclair at the moment, and im barley pulling a full day battery with no data/bluetooth. With the old winmo, I was getting 2.5 days-3days. Thats another main concern for me.
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
pasdabeer said:
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
Click to expand...
Click to collapse
Which one are you looking for?
egzthunder1 said:
...As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)...
Click to expand...
Click to collapse
Verizon is [email protected]
Busy day today
Anyways, I decided to discontinue 25005 since it had a graphical bug, which after spending several hours looking for answers, I couldn't fix...
So, here is the newest build (yes, even newer than 25005)
Build log is pretty much the same as 25005 but with a few exceptions
*Increased pagepool size to 18 MB!
*New Build 25005 (no clue about which COM branch it belongs to, so please don't ask )
*Added Bing
*MSN Widgets are Back
*Removed Opera since there is a newer version out there (with Flash support!). I haven't gotten the cab, so I will let you all install it and let me know
*Internet Sharing Added
*FaceBook Mobile is Back!
*Added QuickGPS (for faster lockons... or so I hear)
*Dialer Lag is gone!!!
*The only extra that I don't like (and I did not put in) was haptic feedback when touching the start menu. If anyone knows how to get rid of this... please.
Click to expand...
Click to collapse
Removed
*Showcase
*Mega dialer (simply left stock). Probably will try to use the GSM dialer from NFS's thread.
*Added Arcsoft MMS to UC Folder
*Added Netfront Concept 4 (latest one) to UC (replace with your choice of browser if you like something else). I find Opera very hard to use without an accelerometer and a scroll wheel, so I decided not to cook it in.
*Updated GoogleMaps to the latest publicly available
*I added a pretty cool looking theme for 6.5 but it was the cause for my funny looking icons and scrollbars, so use at your own risk.
Without Further ado, here is the LINK
[highlight]Installation Notes:[/highlight]
[highlight]Your device must be unlocked for this to work. If you don't know how to unlock it, there is a link on my signature with a guide on how to do this. Also, this is only for the HTC Vogue - which is a CDMA device (no SIM card). It will NOT work for any device that doesn't fall under this. Not sure if you have a Vogue? Go to the WIKI and find out. I am not responsible for damage to your device (not that anything should happen, but legal disclaimers are meant for the "what ifs" )[/highlight]
Drop the XDA_UC folder located in the rar file onto the root of your SD card. Flash and soft reset. The UC process will start upon second boot. You can add/remove any cabs that you want to (or not want) so that the system will install them automatically.
[highlight]CDMA Weather Fix:[/highlight]
Select the weather in your city in the Manila tab prior to installing this fix. Once it is selected, install and soft reset.
LINK to Weather Fix
[highlight]Have a different Carrier than MetroPCS?[/highlight]
Go here (thanks codf4ther!)
Please enjoy and if you like it and feel like buying me coffee... I will gladly accept it
ScreenShots
I know how some of you are picky about this, so here you go...
Bugs
I am happy to say that none so far
Addons, Fixes, and Miscellaneous...
Provisioning CABS Thread (thanks to codybear!!) - Use the cabs located in here only if you are on a carrier other than MetroPCS.
http://forum.xda-developers.com/showpost.php?p=3680840&postcount=3
Egz - glad to see you have a new one out! I'm downloading right now and will flash sometime tomorrow. By the way, in post #2 the screenshots didn't show up, just thought I would let you know. I'll let you know how the new ROM is working once I get it flashed.
Irishpride said:
Egz - glad to see you have a new one out! I'm downloading right now and will flash sometime tomorrow. By the way, in post #2 the screenshots didn't show up, just thought I would let you know. I'll let you know how the new ROM is working once I get it flashed.
Click to expand...
Click to collapse
hehe, I am aware of the screenshots. I was trying to get My Mobiler to see my device, but it just refused to connect. I will try to get something like CapSure or some other tool and get the screenshots directly from my device...
Will this work for Verizon?
Heresfitz said:
Will this work for Verizon?
Click to expand...
Click to collapse
It should as long as you install the Verizon provisioning cab over top NFSFan's roms are built for Bell by default but they run fine on other carriers. I'm not sure if there is something special about MetroPCS that would cause issues but I think you should be fine.
codf4ther said:
It should as long as you install the Verizon provisioning cab over top NFSFan's roms are built for Bell by default but they run fine on other carriers. I'm not sure if there is something special about MetroPCS that would cause issues but I think you should be fine.
Click to expand...
Click to collapse
Right on the money. I will put a link to Codybear's post, which has most of the carrier specific cabs. Thanks for the reminder, cod!
egzthunder1 said:
Right on the money. I will put a link to Codybear's post, which has most of the carrier specific cabs. Thanks for the reminder, cod!
Click to expand...
Click to collapse
Which instructions do you follow for Verizon? The ones he has listed or the ones he links to in NFSFan's ROM post?
scotttr said:
Which instructions do you follow for Verizon? The ones he has listed or the ones he links to in NFSFan's ROM post?
Click to expand...
Click to collapse
The instructions for Verizon that cody gave seem pretty much on the money from what I have read. Try that and if it doesn't work, let me know and I'll get you something else . BTW, the MMS composer in the UC folder is preset for VZW, you may not need to do anything...
The new rom is great, but aggggg the vibration! I did a google to find a registry key to turn it down (not off) and came up dry. Otherwise solid work so far!!! Thanks.!
gjbnh said:
The new rom is great, but aggggg the vibration! I did a google to find a registry key to turn it down (not off) and came up dry. Otherwise solid work so far!!! Thanks.!
Click to expand...
Click to collapse
what vibration??
If you got my 25005, there is a fix for it (you have to edit the registry in a couple of places), which I posted on that thread (it is related to Showcase and it was driving me nuts too ). My advise would be to go with 28230. It seems a bit more stable...
Ouch my bad
Sorry, but I've flash my phone at least 5 times this week, and incorrectly identified the current rom. I need to flash to this one. My Bad
gjbnh said:
Sorry, but I've flash my phone at least 5 times this week, and incorrectly identified the current rom. I need to flash to this one. My Bad
Click to expand...
Click to collapse
That happens
Let me know how you like the rom... and report if there are any bugs.
Your wish is my command (Offer void is most countries, Tuesdays, and full moons)
gjbnh said:
Your wish is my command (Offer void is most countries, Tuesdays, and full moons)
Click to expand...
Click to collapse
Well, it is Friday, in Miami with no moon at all
I've got it up and running this afternoon. Here's s couple of thoughts & questions:
#1) I couldn't get your included ROMUpdateUtility.exe to run on Vista. I just dropped the nbh file in a folder from another rom and it flashed fine. I may have had a corrupted download, but it all extracted fine.
#2) CM Internet Sharing and ICS Control, are these useful on a phone without wifi? I'm curious to know how they can be used.
#3) I'm an EzInput bigot. I still think you should add it
#4) You have a lot of config utils included. Not sure how easy it is to do when cooking, but you might want to throw those in the Tools folder in the start menu. I doubt 90% of users would touch those.
Good job, thanks for cooking these for us.
Is anyone else having marketplace problems in this build? Seems to be slower when running, and I've had several "server" errors..
gjbnh said:
Is anyone else having marketplace problems in this build? Seems to be slower when running, and I've had several "server" errors..
Click to expand...
Click to collapse
I am getting intermittent networking issues on Bell for the last 24hrs. I was blaming it on the ISP...maybe its a problem with 28230