Related
I am getting ready for people to flame me but i am going to ask this anyway, where has the site that hosted the black ROMS? i need the 3G dialer Jasjamming has released. Is it possible someone has it and could post a link up here.
There is something wrong with the shadow site
http://www.4winmobile.com/forums/portal.php
can someone please tell me what the problem is!! when i try to log in i get told i need to download and install a piece of software which i have done but i still cant get into the site, i cant even ask a moderator from that site to help coz i cant see the site!!!
Help & thanks in advance
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
mrvanx said:
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
Click to expand...
Click to collapse
thanks for the advice, can you tell me how i can get to the site mentioned on my previous post? i dnt know how im ment to configure that zend software (also i dont think i hav a webserver(?!?) and im guessing you will know what to do!!
thanks again
P.S. your guides have saved my skin so many times!! (Got my first TYTN recently, ur guide helped me get rid of WM5!!) good work
dude...dont worry about the zend thing....the forum is down and it is a message for the web administrator...the zend engine is part of php.
The site is back up now
Here's the dialer that JJ posted earlier...
"Black Shadow Video Dial CONFIGURATION
For those of you who want Video Dial Capabilities on your Black Shadows you need to install the following:
BACKUP FIRST!!!!!
1. Install Part1.CAB then Soft Reset
2. Install Part2.CAB DONT Soft Reset (press cancel after it is installed --> then go to the next step)
3. Install Part3.CAB then Soft Reset
YOU MUST FOLLOW THE ABOVE EXACTLY TO THE LETTER OTHERWISE IT WONT WORK.
> DOWNLOAD HERE <
Once the above procedure is completed, it takes around 2mb of storage space.
This video dialer is the one found on Black Dymond 3.5 and the benefit is that I have made it compatable with
zombie skins. You can customize your dialer skins by visiting: http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=513
(Note: uninstalling the zombie skins may cause your video button to dissapear therefore to change your zombie skin, just reinstall another)
Once you have successfuly installed the 3g Video DIaler, the "3G Video Dialer" functionality
in Pimp my Black v0.2 works, hence you can enable and disable the 3g Video Dialer (but the non-video dialer
is the basic WM6 one)
Apologies for taking long on this, I was actually trying to port a dialer that matches the current NON-VIDEO one in the Shadow.
This was unsuccessful due to complication with incompatable DLL's for video telephony etc.
NOTE: Once you have completed this procedure you will permanently lose (well until you HR) the DEFAULT SHADOW big-button dialer in your PPC.
Thanks and Best Regards
JJ"
http://www.megaupload.com/?d=P2EK9VR5
thanks guys, i thought there was something wrong with my comp, it did say on the link last night that new software was needed n i jus assumed is was needed by me. anyway it works now.
also to ronfin44 thanks for the links and install instructions, i didnt realize it got rid of the big button dialer, do you think there is any way to just add a another button to the dialer and shrink the font size of the number output?
thanks again
i wonder if someone could edit the retouched wizard dialer available on this site?
megaupload is not working here.. can you please upload at rapidshare?
Here ya go. Try this link. It's the origianl thread JJ posted for it at win4mobile.
http://www.4winmobile.com/forums/hermes-black-rom-support/9975-video-dialer-4-shadow.html
just realized this is one app i cant use. anybody knows how i would be able to uninstall this? will deleting the .cab files uninstall it?
thanks
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
agovinoveritas said:
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
Click to expand...
Click to collapse
i have successfully installed the 3g dialer. i did say i just realized i have no use for the app thats why i was asking how, if possible would i be able to uninstall it. no problem if i cant coz i know ill be HR anyways when i try out another rom. thanks for the reply.
for those who are interested I have uploaded the Australian 3 extended rom for installation after WM6 installation, plus the cab file for set up of other networks- Dopod D810 only.
http://rapidshare.com/files/38093805/Aust_3_ext_rom.rar
http://rapidshare.com/files/38094297/CWW_Enterprises_AUS_Operator_Con.cab
enjoy!
Does this ETX rom have all the things in it required to use planet 3, stream video, use X-series etc?
Just wanted to say thanks for this!
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
can someone host the file on something other than rapidshare, i cant download it for some reason.
zeu569 said:
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
Click to expand...
Click to collapse
you need to unlock the extended rom but that is already unlocked on WM6 versions- i have LVSW wm6 rom installed and it works great.
i will try and upload it somewhere else.....
Silly question but how do you install it?
Hi I have downloaded it and all is well and really it looks like all I need to do is
install the cabs one by one ----- but that ain't right is it?
As Paulene Hanson would say ----- Please Explain
stick them in the extended rom and install from there.
Little foggy on the terminology sorry
MontAlbert said:
stick them in the extended rom and install from there.
Click to expand...
Click to collapse
Hi Thanks for the reply please go easy on my noobness but I am not sure by what you mean??
I mean I extracted the extended rom and went in and excecuted the file in that folder --- I then get a question asking me on my trinity if I want to allow a program (enterbootloader.exe) to execute and then it drops out and the flash screen comes up on the trinity but the flash program on the computer says it has an error comunicating with the device and only finishes with the exit option - however no flash takes place
I get the same with the ax3l rom can anyone help? I think i'm missing some basic ideas here
Maybe i should start a new thread --- but any help would be great
I've uploaded the files to my blog. You can get to them from here:
http://www.webdevblog.net/2007/06/26/windows-mobile-6-setting-for-3-australia-dopod-d810/
Hope this is ok MontAlbert?
Enjoy!
bump please
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
andytof47 said:
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
Click to expand...
Click to collapse
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
grahamrb said:
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
Click to expand...
Click to collapse
hehe- keep waiting mate- gave up waiting a month or 2 ago and am so glad i did. i figure if anything goes wrong with it i will flash it back to the old rom. I am now using Ax3l's ROM and its great.
to make the files work just click on them and they will install each relevant piece of information.
MontAlbert said:
to make the files work just click on them and they will install each relevant piece of information.
Click to expand...
Click to collapse
Copy the "CWW Enterprises AUS Operator Con" file onto the pda and then run it.
What do you do with the rar file - "Aust 3 ext rom"?? Unzip it and transfer the contents onto the pda (12 odd cab files)?? And what about the exe files in there and the ExtROM.rar file (also in the Aust 3 ext rom rar file).
Thanks for any info you can provide.
Graham
EDIT: Just saw this post by you, now I see where you got all those files from, I just don't know what to do with them now I guess:
http://forum.xda-developers.com/showthread.php?t=307275
I need to check out my 3 on my 3 phone ---- help
Hi I am just wondering something, I have the cab files and am playing around with them, but I really only want one thing from them, and that is the access to my 3 ------ everyone with 3 Australia knows what i'm talking about--- anyway, I am using LSVW windows rom and it nice -- much nicer than the default that came with my dopod/trinity --- but I can't check my account now because the icon is gone -- obviously
but I am guessing it is only a small file or something can anyone help me get my three icon back ---- also can anyone give us a quick break down on what the cabs do and the information of why we would want to install the extended rom??
Cheers all
andytof47 said:
but I really only want one thing from them, and that is the access to my 3
Click to expand...
Click to collapse
search for the cab file, CWW Enterprises AUS Operator Con. Run it and it will setup a access point thingie for 3.
then open your ineternet explorer and type the address three.net.au, go to that page then you will be able to find My3
YOu dont even need the CWW Enterprises AUS Operator Con cab file if you already have the 3 services setup on your phone which can be done manually if it is not already there. You can checkout hte three website or call 3care and ask someone to help you set it up.
aaah the CWW file is the 2nd file in the OP
acess denied on three.net.au
Yeah, I installed the CWW Enterprises AUS Operator Con, and ran it, then chose 3, but I am getting an access prohibited error when I connect to three.net.au
Am i supposed to install all the three rom? or is it just that cab --- remember that all i want is to access my three
Cheers
Hi,
Does this work with other ROM ?
Thks
cmon little help maaaaates
Cmon guys lets work this out -------- I gather most of us would be on 3 within oz
so it will help us all
installed all and I have the key back
Hi Just an update --- I installed all of the extended cabs ---- I was still getting the problems with access being denied however It was MEEEEEEEEE I was trying to connect via my wireless connection not GPRS
It's all Good now
Cheers all
Hello everyone,
Xperia is my first Windows mobile and therefore kinda novice to some terms used in this area. My colleague helped me in installing new ROM HTC touch it. It now looks like an HTC phone with cool graphics.
I know mine is tf3d but how can i verify. Also I keep listening to terms like manila, jailbreak, brick etc can someone explain me what these terms relate to. Need little overview of all these terms used.
I tried to install new themes and therefore installed tf3d config tool but it doesnt work on my X1 gives me an error.Is there any other way of installing these themes. Mine is the default black theme.
Hey sandy,
you can check your version under the Settings tab in your TouchFlo at the point "Info".
Also, if you can switch your home clock back and forth i can assure you its TF3D .
By Manila is meant the same as with TF3D(TouchFlo 3D). Jailbreak is usually used to be a name for an iPhone hack, but in our case you can categorize it as something connected with HardSPL. It's a tool that patches your phones rom manager and allows you to flash it with custom roms(like the one you got from your friend - means that your phone is already equipped with it).
I'm not sure about compatibility with the config tool since i've never used it, but i can tell you that the easiest way of applying themes is the usage of cabs.
You can find different theme-cabs in this section (themes and applications).
If you have any other questions I'd suggest you just to ask in here.
Thanks mate for clarifying, do you have a simple procedure on how to flash rom and install new custom roms. As for theme cab file is it possible for you to provide me with one theme cab file i just wanna test it out before downloading others. I assume i can revert back to my original black theme incase i dont like the new one.
hello m8 in this thread there is very usefull tutorial on how to flash custom roms and if u bored there is also tutorial on how to get back to official sotck rom. read it carefully and in 20 mins u will become profesional flasher http://forum.xda-developers.com/showthread.php?t=431218
i hope i helped you
The link you provided is about hardspl whats the next thing to do after hardspl? How to install custom roms available in this forums? Is there a procedure for doing this.
Actually there's always an .exe file with the rom package.
you simply start the .exe and follow the steps described.
The only thing to care about is a stable activesync/dev centre connection and a battery life of above 50%
Hay guys, let me just say im complete newb at all this phone stuff unforchunalty. I dont know anything about this stuff so im asking for your help please. Ok, i want to get the upgraded HTC tf3d on my AT&T titl 2. I'm sick of the blue AT&T blue. Is it possible to get Max Manila 2.5, (I think that whats it called) for my phone? I dont know how to dl it onto my phone, or aanything. So please if any of you guys can help id be very thankful. Note, I dont know how to unlock or flash my rom, I dont even know what that mean but i see them alot. Thank guys.
Welcome to forums
yes you can have Manila 2.5
Have a deep read here to learn how to flash:
http://forum.xda-developers.com/showthread.php?t=550540
Then select the ROM of your preference on the Rhodium section
Read, Search, Respect and Emjoy!
Good luck,
And don't forget to vote for Rhodium!!
Hay thx orb3000!
Since you are newbi I recommend the Energy
To have most of the work done for you check out:
http://forum.xda-developers.com/showthread.php?t=562773
I am running NRGz 21855 Dec 31st Standard build and it is pretty sweet. A few bugs but it is still nice. NRG also puts out another TP2 ROM which is less than bleeding edge but more stable codenamed Pheonix. Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Omg kroniced thank you to for repling, Im having a hard time with this, there is a good chance im going to be asking for help. Thanks alot for the link man, I really mean it.
kroniced said:
Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Click to expand...
Click to collapse
Wait, what?
As in, Touch Flo 3D 2.8? As in a new version over Sense UI 2.5, already found on Leo & custom roms for other devices?
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
theherofromdoom said:
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
Click to expand...
Click to collapse
So what exactly happens when you run Rhodium-HardSPL_V2_00R3.EXE? Is it a connection error, a program error, a device error? If you have a Tilt2, you probably need to install this to your device before you run the executable. BTW, you're not backing up your device with HardSPL, you're replacing the stock, HTC bootloader with a patched bootloader, a process which you only need to do once. It's also not necessary to back up your device before flashing a new ROM, it's just recommended if you have important stuff saved to main memory, since you lose all the data on your device each time you flash. You will not lose data when installing HardSPL with this executable.
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
theherofromdoom said:
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
Click to expand...
Click to collapse
A .cab is an installer, just like an EXE or MSI on a desktop computer. Don't uncompress it, just put the .cab file as is onto your device, disconnect your device from the computer, browse to wherever you put it with File Explorer Mobile, and open it. Install it to internal memory and you're done. Also, try disabling your Antivirus/Firewall and ensure you have Windows Mobile Device Center (Vista/7) or ActiveSync (XP and lower). And no offence, but you might want to hold off on flashing for a little while, at least until you get a bit more acquainted with Windows Mobile. I recommend that everyone who flashes their device at least understand the technical aspects, since that highly reduces chances of bricking as an end result.
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Get accustomed to you phone by doing the minor cabs and tweaks found here:
http://forum.xda-developers.com/showthread.php?t=524655
Most of this stuff is harmless and will get you use to using cabs and changing things on your phone.
theherofromdoom said:
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Click to expand...
Click to collapse
No, that .cab enables RAPI (Remote API) on the Tilt2, which allows programs like the HardSPL unlocker, on the PC, to control the device to an extent, which it needs to do in order to flash HardSPL.
Hi, How can I get the actual version of manila running on my Tilt 2
Thanks
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
sirphunkee said:
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
Click to expand...
Click to collapse
minor correction: HKLM\Software\HTC\Manila\Version
On the stock Tilt2, the version is 2.1.19183217.0
Note that this can also be seen by looking at the About section of the Settings tab in TF3D.
This is awsome DaveTheTytnIIGuy, the programe you sent me worked. I was suscussfully able to flash my HardSPL, with Rhodium-HardSPL_V2_00R3. Thank you. So now I'm up to the next step witch is finding a ROM.
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
raveztaylor said:
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
Click to expand...
Click to collapse
The only way to get a different version of Manila is to change ROMs. If you're using the stock ROM, you'll need to switch to a cooked ROM to get one of the newer versions of Manila.
== MOD EDIT ==
please check stickY
== END EDIT ==
Hi there,
First of all! Great forum! You guys have build a great community and I like it. But I hope you can help me with this. i know there are a lot of threads about this, but because all the different type of phones/android versions ect... I don't know what to do...
My question, how can I get Adroid running on my HTC Touch Pro 2 (Rhodium). I have the standart version, so not a branded one.
I've tried to install it but android won't launch. Maby one of you could create a mini tutorial or a noob tutorial, because I think there are more people like me (with less knowedge of phone tech) who want to run android on their phones. I hope you could help me!
Thanks!
Kind Regards,
Sami
http://forum.xda-developers.com/showthread.php?t=627997
Rhodium XDAndroid Rebuild .CAB WWE(02/24):
Please download the appropriate .cab for your device!
Rhodium/Touch Pro 2 Android .cab:
Rhod210 Download
Tilt2 Android .cab:
Tilt2 Download
NEW: Rhod100 fr/uk/de Android .cab:
Rhod100 Download
Instructions for .cab:
Cab is only WWE for the moment. If you still want to try this build skip down to the .rar for any other language.
If you are installing this over an old version of android, and you do not format your SD card, make sure that you at least delete data.img file from your SD card!
Copy to SD card
Install: This .cab does install directly to your SD card.
Soft Reset your handset
Run Haret from start menu and enjoy!
Click to expand...
Click to collapse
how could it be simpler?
Samich2007 said:
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
where do u dl haret.its mentioned but theres no dl link
cdiesel said:
where do u dl haret.its mentioned but theres no dl link
Click to expand...
Click to collapse
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Reefermattness said:
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Click to expand...
Click to collapse
yea thanks i did a little digging and was finally able to understand that
i dont know why posts like this are started. its so easy to use this perfect cab file! nothing else to do. if people would read just 10 minutes in other threads all questions should be answered...
how could it be simpler?
Quote:
Originally Posted by Samich2007 View Post
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
Click to expand...
Click to collapse
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
Disable your pin in WinMo as stated in my release notes.
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
as mentioned above
read the XXXX manual before posting...
edit:
ok Reefermattness was faster again
Mod Edit: Keep language clean juniors use XDA, also sometimes best to say nothing........
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Samich2007 said:
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Click to expand...
Click to collapse
next question which could be answered in minutes reading other posts...
NO there is no android version with working wifi for rhodium yet...
Oké i'm sorry... Hope it will be availible soon.
Samich2007 said:
Oké i'm sorry... Hope it will be availible soon.
Click to expand...
Click to collapse
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
I have Android installed on my phone and it works fine except one MAJOR thing. I messed up the touch screen calibration and now I can't use the touch screen in android and I cant figure out how to recal the touch screen in android.
Got it. i just deleted the ts calibration file from the android project folder and started android again.
lhwparis said:
as mentioned above
read the ****ing manual before posting...
edit:
ok Reefermattness was faster again
Click to expand...
Click to collapse
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
delete all the contents from the .cab file you downloaded, make sure your memory card has wiped any remaining files from the original download, re-install and make sure you are downloading the correct .cab file for your handset, install to memory card and try again.
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already. Stop treating people like idiots. Help them or stop reading the thread. Someone else will help them out. It's not that serious. I can tell you one problem here that I encountered was a thread would be started and trail off into someting completely different never answering the first question. After reading pages upoon pages you get nothing. Some people like myself have real lives and real jobs and dont have time to sit here and read every post. If you take it so serious maybe you should sticky an informative how to guide and maybe that will stop people from bothering you so much.
gary-09 said:
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
Click to expand...
Click to collapse
Is the folder in the root of your memory card?
dutch169 said:
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already.
Click to expand...
Click to collapse
I was actually on XDA for about 6 months, reading, before I finally decided to even MAKE an account, because I didn't want to be "That Noob". It was about another 6 months to a year before I posted anything at all. As you said yourself, most questions have already been asked a million times. This means that it is only a matter of reading, before you find someone that has asked the same question. In most cases once you find the question, and read a little further it leads you to the answer. He was smart enough to post in the correct sub-forum, which means he must have read through the forums a bit anyways. It wouldn't have taken much more work to read the top 3 sticky threads in that same sub-forum, and find the answer to the question.
I can get the whole thing to load however I cannot ever get the start screen (touch the androind to start) to ever let me touch it. The only thing that works is the keyboard input. Any suggestions?