Related
so...my idea goes like this...
1.what is the first thing u think of after your device got lost\stolen??
W.I.M.P (or any other anti theft program)
2.what is the second thing u think of???
what if the person who found\stole my device performed HR(?!)..
ok so what i was thinking of is having a way to change\modify the buttons sequence (witch every body knows) to perform HR so it will be like your own locking code..
****************
another thing that have to be done in order to prevent unwanted HR is to change the "1234" numbers u r being asked to enter when trying HR from the software to a personal code...
****************
unfortunately..i dont have this kind of tools and knowledge to do it so i'm asking u guys...
plz check it out !! it will upgrade the whole security issue...
Well there is also a thing like Clear Storage under the settings page wich also does a hard reset.
u missed the point..i'm not looking for another ways to HR....
no, but a thief can use that instead.
Or upload a program to do a HR.
Best thing to do is to bake WIMP in your ROM so it will be active after a HR. And get a sort of 'own signed' HardSPL so your thief can not flash it.
But I think he could flash the HardSPL, anyway, i think not many thieves come that far
good point !
but where is this coded ?
it must be before device loads bootloader ?! and if so - this is then hardcoded on the mb ... which maybe a bit tricky to change..
but i am sure we do have some more into deep guys on board .. so why not give it a try .. and brick another device ;-)
I think olinex can fix a way to 'sign' a rom with your code, so the hardspl can only flash roms that are signed with YOUR code. Building those roms is not very hard from existing ones I guess.
I am only curious, if the device can be locked in that way so no SPL can be changed (without password/right code/right SPL rom). I don't think that is possible.
Building a functional ROM with antitheft program full running is not hard.
Also make sure, the antitheft program can't be killed by advanced taskmanagers.
At first, it should stay invisible.
But, unless an XDA-noob steals your phone, don't be worried. Just a hard-reset surviving should be enough for 99% of the thieves. No 'simple' thief will know about reflashing and SPL
This looks promising! keep up the ideas!!!
YOu might want to look at this: http://www.pocketpc-live.com/pocketpc-softwares/ultimate-theft-alert-v3-for-pocket-pcs.html
i know it does not do what yo want, but i thought you may find it interesting because if there is some type of security development the messaging and locking features from her are very nice.
how hard will it be to take the official 1.93.456.2 rom and add W.I.M.P to it by cooking???
any links for a guide plz?
Maybe you can try cooking Ultimate Theft Alert v35! into it. Already guides are there which can me modified for diamond. Look here and here.
Regards,
Carty..
Carty said:
Maybe you can try cooking Ultimate Theft Alert v35! into it. Already guides are there which can me modified for diamond. Look here and here.
Regards,
Carty..
Click to expand...
Click to collapse
wow read all of that seems pretty freaking neet
Thanks
Regards,
Carty..
I'm not a programmer....
but i think it's simple.. should go something like this:
Code:
if (diamond.stolen) ;
then do "change HR combination" ;
for i in buttons do
buttons.change;
end
i wish i had known more about it and have the guts to try it
ok....i was thinking about it while showering...
when u do "clear storage" u r being asked to enter "1234" to confirm...
all we need to do is change it too....
now...if we change the HR buttons sequence and the numbers to enter for HR from the software......what other way to HR u can use????
i think this is the best solution...
anyone know how to do it?
Attached is a CAB that will "app unlock" your stock TP2 (custom ROMs generally do not need this).
Primarily it enables RAPI functionalities, like remote registry editing and ROM dumping. Also disabled "not signed" warnings for unsigned apps.
(Yes I know there is many stuff out there to do this. Just thought I'd post it here in the Rhodium forum for those wondering how to do this)
Nice one mate
Dave
Hey thanks man. I am getting all the cabs that I am going to need next month when I get an upgrade with Tmo USA. This will be handy since I will probably not be unlocking or messing with it for a while to make sure I don't lose my warranty. After a few months, I just might get enough courage to play with it a little more. For now, I will only do small changes that I can undo easily in case I have to send it in for service.
MarkanthonY said:
Hey thanks man. I am getting all the cabs that I am going to need next month when I get an upgrade with Tmo USA. This will be handy since I will probably not be unlocking or messing with it for a while to make sure I don't lose my warranty. After a few months, I just might get enough courage to play with it a little more. For now, I will only do small changes that I can undo easily in case I have to send it in for service.
Click to expand...
Click to collapse
Thanks ChainFire,
I'll add it to the tweaks thread too.
Cheers,
Beasty
many thanks!
app unlock
All TP2's or only GSM?
Thanks,
Nate
IBTRules said:
All TP2's or only GSM?
Thanks,
Nate
Click to expand...
Click to collapse
Should be all, try it .
Nothing a hard reset cannot fix .
Dave
didnt work on my sprint tp2 ...
When i try to install the wifi sharing software it gives me a permission error.
Any ideas?
How van i install this?
lowspeed said:
didnt work on my sprint tp2 ...
When i try to install the wifi sharing software it gives me a permission error.
Any ideas?
Click to expand...
Click to collapse
Same here...I installed the appunlock cab and then tried to install a commManager cab that has htc wifirouter in the comm manager and it would say I have insufficient permissions to install.
Thank very much
pardon my ignorance, but what exactly would this cab allow me to do? i'm reading ROM dumping but I've always thought of ROM requiring Flashing and the like.
this is great.
Chainfire said:
Attached is a CAB that will "app unlock" your stock TP2 (custom ROMs generally do not need this).
Primarily it enables RAPI functionalities, like remote registry editing and ROM dumping. Also disabled "not signed" warnings for unsigned apps.
(Yes I know there is many stuff out there to do this. Just thought I'd post it here in the Rhodium forum for those wondering how to do this)
Click to expand...
Click to collapse
Thank you so much, this is what i am looking for.
Hay guys, let me just say im complete newb at all this phone stuff unforchunalty. I dont know anything about this stuff so im asking for your help please. Ok, i want to get the upgraded HTC tf3d on my AT&T titl 2. I'm sick of the blue AT&T blue. Is it possible to get Max Manila 2.5, (I think that whats it called) for my phone? I dont know how to dl it onto my phone, or aanything. So please if any of you guys can help id be very thankful. Note, I dont know how to unlock or flash my rom, I dont even know what that mean but i see them alot. Thank guys.
Welcome to forums
yes you can have Manila 2.5
Have a deep read here to learn how to flash:
http://forum.xda-developers.com/showthread.php?t=550540
Then select the ROM of your preference on the Rhodium section
Read, Search, Respect and Emjoy!
Good luck,
And don't forget to vote for Rhodium!!
Hay thx orb3000!
Since you are newbi I recommend the Energy
To have most of the work done for you check out:
http://forum.xda-developers.com/showthread.php?t=562773
I am running NRGz 21855 Dec 31st Standard build and it is pretty sweet. A few bugs but it is still nice. NRG also puts out another TP2 ROM which is less than bleeding edge but more stable codenamed Pheonix. Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Omg kroniced thank you to for repling, Im having a hard time with this, there is a good chance im going to be asking for help. Thanks alot for the link man, I really mean it.
kroniced said:
Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Click to expand...
Click to collapse
Wait, what?
As in, Touch Flo 3D 2.8? As in a new version over Sense UI 2.5, already found on Leo & custom roms for other devices?
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
theherofromdoom said:
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
Click to expand...
Click to collapse
So what exactly happens when you run Rhodium-HardSPL_V2_00R3.EXE? Is it a connection error, a program error, a device error? If you have a Tilt2, you probably need to install this to your device before you run the executable. BTW, you're not backing up your device with HardSPL, you're replacing the stock, HTC bootloader with a patched bootloader, a process which you only need to do once. It's also not necessary to back up your device before flashing a new ROM, it's just recommended if you have important stuff saved to main memory, since you lose all the data on your device each time you flash. You will not lose data when installing HardSPL with this executable.
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
theherofromdoom said:
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
Click to expand...
Click to collapse
A .cab is an installer, just like an EXE or MSI on a desktop computer. Don't uncompress it, just put the .cab file as is onto your device, disconnect your device from the computer, browse to wherever you put it with File Explorer Mobile, and open it. Install it to internal memory and you're done. Also, try disabling your Antivirus/Firewall and ensure you have Windows Mobile Device Center (Vista/7) or ActiveSync (XP and lower). And no offence, but you might want to hold off on flashing for a little while, at least until you get a bit more acquainted with Windows Mobile. I recommend that everyone who flashes their device at least understand the technical aspects, since that highly reduces chances of bricking as an end result.
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Get accustomed to you phone by doing the minor cabs and tweaks found here:
http://forum.xda-developers.com/showthread.php?t=524655
Most of this stuff is harmless and will get you use to using cabs and changing things on your phone.
theherofromdoom said:
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Click to expand...
Click to collapse
No, that .cab enables RAPI (Remote API) on the Tilt2, which allows programs like the HardSPL unlocker, on the PC, to control the device to an extent, which it needs to do in order to flash HardSPL.
Hi, How can I get the actual version of manila running on my Tilt 2
Thanks
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
sirphunkee said:
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
Click to expand...
Click to collapse
minor correction: HKLM\Software\HTC\Manila\Version
On the stock Tilt2, the version is 2.1.19183217.0
Note that this can also be seen by looking at the About section of the Settings tab in TF3D.
This is awsome DaveTheTytnIIGuy, the programe you sent me worked. I was suscussfully able to flash my HardSPL, with Rhodium-HardSPL_V2_00R3. Thank you. So now I'm up to the next step witch is finding a ROM.
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
raveztaylor said:
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
Click to expand...
Click to collapse
The only way to get a different version of Manila is to change ROMs. If you're using the stock ROM, you'll need to switch to a cooked ROM to get one of the newer versions of Manila.
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
egzthunder1 said:
All,
Due to good success in the Blue Angel section, I have decided to open a Questions and Answers thread on this section of the forum as well. This will be good to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Vogue in any way. This includes but is not limited to people that are providing
*New Roms and Kitchens
*Programs and Apps
*Fixes
*Skins
*Tips and Tricks
However, I have a life (and so do most of you), which is why I would like to request the help from other Seniors (or anyone who knows the answer really ) to monitor the thread as well. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question 37000 times...
Without further ado, lets go for it!
Click to expand...
Click to collapse
GOOD IDEA!
Hi there Gents any input
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
Did you install the CDMA home weather fix?
joshmxpx said:
Great idea for a faq page!
I have been using a NFSfan rom on my bell vogue for a while, and it crapped out today for some reason. Rather than put another WM build on it, I wanted to change to Android.
I have looked through many pages in here, but I can't find a simple tutorial on switch from a custom WM build to a Android build. I prefer to use the NAND method so that I don't ever have to see WM again...
Can someone create or point me towards a step-by-step guide for installing Android? Keep in mind that I have absolutely no Android experience, and that my custom ROM is completely messed up, so would it make for sense to flash the a manf build and upgrade from there?
Thanks
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?t=628353
Good luck!
devildog0729 said:
Barogi awesome so far for v2; media player not staying in full screen mode though, and manila home weather under clock wont update when you push update now also getting error message for manila home on reboot
Click to expand...
Click to collapse
As far as WMP, Barogi will have to look into it since it is his rom.
One last thing, please do not double post. Thanks for understanding...
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
AaronNZ said:
I have a question:
I recently flashed the Bell rom with the latest radio (I couldn't get the radio only nbh to apply properly), and then subsequently flashed with the latest NagROM rom (which is awesome btw).
Now of course, at startup i have the nice HTC screen with the rom version etc, followed by an AWFUL blue BELL screen (and then the nice orange wm6.5 screen).
Is it possible to change the blue BELL screen? And if so how?
Click to expand...
Click to collapse
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Question from motoyola
motoyola said:
Help guys, I have a Sprint vogue that was flashed before. It was CID unlocked and has custom ROM on it. My cousin was the one using it then he returned it to me at this state. Problem is the phone does not have any radio. So i tried to bootload it and flash it with a radio but it does not accept it . It's now CID locked.
VOGU100 MFG
SPL-2.01.1000
CPLD-3
I tried to flash it with an OEM ROM, Sprint, USC, Alltel, telus, Bell, VZW nothing seems to work. is there any way to ICD unlock this? so i could flash it with an OEM rom. Thanks.
Click to expand...
Click to collapse
Look in my signature. There is a guide for unlocking as well as superCID unlock the device. Let me know if you need help.
egzthunder1 said:
There was a cab to change that somewhere around here in this section of the forum. Alternatively, you can flash NFSFan's rom (which will get rid of it), or you can try mine as well and then reflash Nag's rom.
Edit: Here you go
http://rapidshare.com/files/333401458/BlueBell_Screen_Removal_Rom.rar.html
Click to expand...
Click to collapse
Thanks, that link is broken, but I found it here (along with some other handy things)
http://www.webcoast.net/temp/
i just flash my vogue with the latest NFSFAN rom. can someone tell me the setting to get my gps to work? whenever i start googlemap it keeps on trying to connect through the data connection. (i did do that one step that NFSFAN asked for the gps dL that verizon cab)
Question from mac+htc
mac+htc said:
Hey everyone,
So I was running NSFANS 6.5 ROM on my device (Amazing ROM btw) But I needed to revert back to the stock rom. I used the VZW updater to go back to the stock rom and I changed the esn on line. When I dialed the *228 and choose option 1 I got a failed message. So I called customer support and he walked me through a manual programing. Well that got voice working but when I went to use the data it wouldn't work. I made sure all the network settings were right, and I still couldn't connect. Well then I hard reset the device and now I am back to square 1. No voice no data. Is this something from NSFANS rom that is messing the phone up? I don't want to call again because their tech support takes forever and I am afraid they are just going to tell me to take the phone into the store. Thanks in advance!
Click to expand...
Click to collapse
Why did you change the E$N? Where you using the device in a different carrier?
Back to your problem. Your EPST settings should survive a hard reset as those are parameters that are not stored in Windows (afaik). It really makes not difference which rom you are using (at least for Voice and SMS).
Lets focus on your main phone's capabilities first. If your EPST settings truly got lost, you will need to get them from Verizon again. The main ones are the MSD and MIN. Make sure that you write them down this time as you will need them again if they go bye bye.
As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)
Do that and let me know if this works. They will have to program this for you this time, but once you have the values that I mentioned before, you will be able to do it yourself.
Question from pasdabeer
pasdabeer said:
I have android 2.1 currently on my vx6900, Id like to go back to close to stock Rom, but without all the verizon carrier "flavorings" and rescrictions.
Any ideas? Personaly I liked the simple clean useage of win 6.0 without all the extra graphics ( besides the HTC home plug in and the touch flo )
thanks in advance.
Click to expand...
Click to collapse
Try to get Barogi's latest "lite" rom. Also, you can't go wrong with vin's 28014 or NFSFan's rom. I would recommend mine, but I think they might be a little heavy for what you want. Good luck.
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
pasdabeer said:
i checked out NSFSfan. It was nice, but waaaaaaaaaaaaaaay to much for what I want. Ill check out the other you suggested before i just flash back to stock rom
Click to expand...
Click to collapse
Try to avoid stock if you can... it has a bad tendency of being too heavy on the extra apps.
I checked out just SS's of both. Both look awesome, but theres something about the simple look ( or im just used to it since my 8125 ) of the stock look. I would like to have the look but the added memory of a cooked rom.
With NSFSfans, could you remove the today screen plug ins to get back to a more stock look?
Im runnin 2.1 android eclair at the moment, and im barley pulling a full day battery with no data/bluetooth. With the old winmo, I was getting 2.5 days-3days. Thats another main concern for me.
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
pasdabeer said:
figures, I like the way your rom looks the best! to bad hotfile lost the file : (
There is a temporary problem with accessing this file. Our technical team is resolving the problem right now.
HOTFILE.COM - Free one-click file hosting!
With us you can share big files easily and securely:
Just choose a file, click the "Upload" button and send the download link to your friends and anyone you know.
Click to expand...
Click to collapse
Which one are you looking for?
egzthunder1 said:
...As for your internet, you will probably need to set the correct username in the phone's programming as well (also info that you will need from Verizon, but it should be something like [email protected] or something like that)...
Click to expand...
Click to collapse
Verizon is [email protected]
== MOD EDIT ==
please check stickY
== END EDIT ==
Hi there,
First of all! Great forum! You guys have build a great community and I like it. But I hope you can help me with this. i know there are a lot of threads about this, but because all the different type of phones/android versions ect... I don't know what to do...
My question, how can I get Adroid running on my HTC Touch Pro 2 (Rhodium). I have the standart version, so not a branded one.
I've tried to install it but android won't launch. Maby one of you could create a mini tutorial or a noob tutorial, because I think there are more people like me (with less knowedge of phone tech) who want to run android on their phones. I hope you could help me!
Thanks!
Kind Regards,
Sami
http://forum.xda-developers.com/showthread.php?t=627997
Rhodium XDAndroid Rebuild .CAB WWE(02/24):
Please download the appropriate .cab for your device!
Rhodium/Touch Pro 2 Android .cab:
Rhod210 Download
Tilt2 Android .cab:
Tilt2 Download
NEW: Rhod100 fr/uk/de Android .cab:
Rhod100 Download
Instructions for .cab:
Cab is only WWE for the moment. If you still want to try this build skip down to the .rar for any other language.
If you are installing this over an old version of android, and you do not format your SD card, make sure that you at least delete data.img file from your SD card!
Copy to SD card
Install: This .cab does install directly to your SD card.
Soft Reset your handset
Run Haret from start menu and enjoy!
Click to expand...
Click to collapse
how could it be simpler?
Samich2007 said:
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
where do u dl haret.its mentioned but theres no dl link
cdiesel said:
where do u dl haret.its mentioned but theres no dl link
Click to expand...
Click to collapse
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Reefermattness said:
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Click to expand...
Click to collapse
yea thanks i did a little digging and was finally able to understand that
i dont know why posts like this are started. its so easy to use this perfect cab file! nothing else to do. if people would read just 10 minutes in other threads all questions should be answered...
how could it be simpler?
Quote:
Originally Posted by Samich2007 View Post
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
Click to expand...
Click to collapse
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
Disable your pin in WinMo as stated in my release notes.
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
as mentioned above
read the XXXX manual before posting...
edit:
ok Reefermattness was faster again
Mod Edit: Keep language clean juniors use XDA, also sometimes best to say nothing........
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Samich2007 said:
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Click to expand...
Click to collapse
next question which could be answered in minutes reading other posts...
NO there is no android version with working wifi for rhodium yet...
Oké i'm sorry... Hope it will be availible soon.
Samich2007 said:
Oké i'm sorry... Hope it will be availible soon.
Click to expand...
Click to collapse
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
I have Android installed on my phone and it works fine except one MAJOR thing. I messed up the touch screen calibration and now I can't use the touch screen in android and I cant figure out how to recal the touch screen in android.
Got it. i just deleted the ts calibration file from the android project folder and started android again.
lhwparis said:
as mentioned above
read the ****ing manual before posting...
edit:
ok Reefermattness was faster again
Click to expand...
Click to collapse
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
delete all the contents from the .cab file you downloaded, make sure your memory card has wiped any remaining files from the original download, re-install and make sure you are downloading the correct .cab file for your handset, install to memory card and try again.
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already. Stop treating people like idiots. Help them or stop reading the thread. Someone else will help them out. It's not that serious. I can tell you one problem here that I encountered was a thread would be started and trail off into someting completely different never answering the first question. After reading pages upoon pages you get nothing. Some people like myself have real lives and real jobs and dont have time to sit here and read every post. If you take it so serious maybe you should sticky an informative how to guide and maybe that will stop people from bothering you so much.
gary-09 said:
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
Click to expand...
Click to collapse
Is the folder in the root of your memory card?
dutch169 said:
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already.
Click to expand...
Click to collapse
I was actually on XDA for about 6 months, reading, before I finally decided to even MAKE an account, because I didn't want to be "That Noob". It was about another 6 months to a year before I posted anything at all. As you said yourself, most questions have already been asked a million times. This means that it is only a matter of reading, before you find someone that has asked the same question. In most cases once you find the question, and read a little further it leads you to the answer. He was smart enough to post in the correct sub-forum, which means he must have read through the forums a bit anyways. It wouldn't have taken much more work to read the top 3 sticky threads in that same sub-forum, and find the answer to the question.
I can get the whole thing to load however I cannot ever get the start screen (touch the androind to start) to ever let me touch it. The only thing that works is the keyboard input. Any suggestions?