hi,
do you now if exist the possibility to install the program thta ask you if you want to connect to your pda as usb or activesync when you connect to the pc.
the same as is used in the diamond?
thanks in advance
kkfuti said:
hi,
do you now if exist the possibility to install the program thta ask you if you want to connect to your pda as usb or activesync when you connect to the pc.
the same as is used in the diamond?
thanks in advance
Click to expand...
Click to collapse
is this what you are after? all credit to the creator of the cab!
thanks but it dosen't work on my artemis. I conneto to the pc and nothing do the pda....
Related
Help why my activesync cant connect with my PPC?
Thanks
Did you use xp sp2 and activesync 4?
I used to have ActiveSync 4.0 problems too... Device manager detected the device but failed to install driver.
In my case it started working once I swaped the cradle's USB connector to another USB jack with the PDA in the cradle.
Windows XP found the "new" device and installed properly this time... Now I can Synch fine through USB.
Also some say that you need to change something on you PPC, so go to Start/Settings/Conenctions/Network Cards and select "Remote-NDIS Host" and change it to "Server-assigned IP address" and then Ok, Ok, Ok...
I hope this helps you...
Rayan
Hi to everybody!!!
I have used qtek 9000 with usb cabel,but without cd-software, i installd Microsoft acitve sync on my pc, but i cant connect gtek via USB mini cabel with pc - say: "ActiveSync cannot connect to the Windows mobile powered device"
Pls, where can i download cd software for qtek9000 or some driver???
Thnks to all,
hope this will help!!
thats a "working" active sync installation from my pc!
unrar and replace the files on your AS installation folder!
hope this will help you!!
here i comes!
This driver isnt for modem usb
pinkfluid said:
Hi to everybody!!!
I have used qtek 9000 with usb cabel,but without cd-software, i installd Microsoft acitve sync on my pc, but i cant connect gtek via USB mini cabel with pc - say: "ActiveSync cannot connect to the Windows mobile powered device"
Pls, where can i download cd software for qtek9000 or some driver???
Thnks to all,
Click to expand...
Click to collapse
Do you have any firewall installed? Have you run the Activesync troubleshooter? Atlast go to your device--> settings-->Connections-->USB to PC--> uncheck the Unable advanced network functionality
Config: MacBook Pro, Leopard, Parallels, XP.
Have downloaded the new official norwegian ROM, start it in XP, get bootloaderscreen on Diamond, then this message on Mac:
"USB device you are trying to connect to the virtual machine is being used by another application. Close that application or unplug the device and plug it again. Then try to connect the device again."
Cant find any programs using USB at all, also tried clen startup.
On P3600 upgrading ROM on this config is no problem.
What do I do wrong?
HP
Did you start up parallels before or after connecting your Diamond to your mac?
I'm on a 20" iMac,
I'm using bootcamp for XP and that works fine. I think your problem is that when you connect a usb device to your mac, Leopard loads it in a certain way. Maybe iSync or Missing Sync detects your device (check for the iSync logo in your toolbar). Try to disable iSync and check if Leopard mounts your MDA as a disk).
I'm not on my mac right now but i will check if i can find the problem when i get home.
New Bootloader solved the problem.
Thanks for answering.
HP
hpn said:
Config: MacBook Pro, Leopard, Parallels, XP.
Have downloaded the new official norwegian ROM, start it in XP, get bootloaderscreen on Diamond, then this message on Mac:
"USB device you are trying to connect to the virtual machine is being used by another application. Close that application or unplug the device and plug it again. Then try to connect the device again."
Cant find any programs using USB at all, also tried clen startup.
On P3600 upgrading ROM on this config is no problem.
What do I do wrong?
HP
Click to expand...
Click to collapse
What you did wrong is getting a Mac!!!! heheh just kidding!
hpn said:
New Bootloader solved the problem.
Thanks for answering.
HP
Click to expand...
Click to collapse
What bootloader solved this for you? Please explain
Hello all and sorry for my English,
I have problems with my HTC Diamond, my computer does not recognize the phone when I connect. USB unrecognized.
I managed to update the rom and radio via the internal drive but not possible for the SPL.
Someone would have an idea.
Edit : Link for update from internal drive : http://htc-touch-diamond.forumactif.../flasher-depuis-le-stockage-interne-t4653.htm
Thank you in advance
Zeux
I have this issue with different USB-cables. Try another cable.
I have tried on several different PC and cable, but the problem is always the same.
ZeuX said:
Hello all and sorry for my English,
I have problems with my HTC Diamond, my computer does not recognize the phone when I connect. USB unrecognized.
I managed to update the rom and radio via the internal drive but not possible for the SPL.
Someone would have an idea.
Edit : Link for update from internal drive : http://htc-touch-diamond.forumactif.../flasher-depuis-le-stockage-interne-t4653.htm
Thank you in advance
Zeux
Click to expand...
Click to collapse
what windows are u usingm if ur using the original usb cable it should work , Try a different usb port on ur computer, not sure what else to suggest
ZeuX said:
I have tried on several different PC and cable, but the problem is always the same.
Click to expand...
Click to collapse
Did you try this:
Start --> settings --> connections --> USB to PC --> DESELECT "Enable Advanced network functionality"
NitroOnTheRocks said:
Did you try this:
Start --> settings --> connections --> USB to PC --> DESELECT "Enable Advanced network functionality"
Click to expand...
Click to collapse
Yes i try and is always the same problem, I also tried with disk drive
What is the current SPL?
You know that Olipro's hardSPL is write protected?
The only way to flash a write-protected it is to use the Soft SPL which is used to flash the hard spl, but change the hard-SPL file with your own SPL file.
Curently my SPL is SPL-1.40.olinex.
Sorry i m french and i dont understand.
It's possible to flash my SPL from internal storage ?
The same to my Phone!!!
Curently my SPL is SPL-1.39.olinex.
My phone cannot link to PC by cable.
I want to know to flash the phone by Mobile itself Memory(Flash Rom)
Hi guys,
same for me here, definitly a USB-hardware failure of the Xda, tried anything possible to connect, hardresets/ROM change, any suggested WinMo options, different cables, different PCs, reinstalling activesync, removing USB-Devices from PCs device manager. Win XP shows "unknown device", no chance to hook it up via cable. Bluetooth sync is possible, though. I'm on Olinex 1.40, so i join the request... anybody has a clue on how to revert it back to the original SPL without activesync?
thx in advance!
Also the same problem for me ! (I'm Dutch)
I've got a branded Vodafone one and had flash my Diamond with SPL-1.93.OliNex and with the dutch HTC ROM (the last one original ROM from the HTC website)
Also no conaction with the USB cable !!!!!!
Is my Phone USB broken ??????????????
Or can i flash mij phone with the internal storage card ?????
Can someone explane how the do that.
THX
Lokje
Is there any way to flash SSPL without using the sspl-manual.exe? The automatic mode would not go into the bootloader.
The issue is that the touchscreen stopped working and now the OS is stuck at "tap screen here" after the hard reset.
hi
i have a diamond that when i connect to the USB cable ,it ask me normaly to chose betwen Activesync and mass storage but whatever i chose nothing happens on my pc and diamond itself.
my pc and my cable are ok because i can sync my friends diomond noramly.
does my diamond have a hardware problem?
adempozhari said:
hi
i have a diamond that when i connect to the USB cable ,it ask me normaly to chose betwen Activesync and mass storage but whatever i chose nothing happens on my pc and diamond itself.
my pc and my cable are ok because i can sync my friends diomond noramly.
does my diamond have a hardware problem?
Click to expand...
Click to collapse
Depending on whether you are using Vista or Xp.
Try this: Go to Start>Settings>Connections>USB to PC
> if there is a check mark by "Enable faster data sych.......Remove and see if this fixes your problem.
Secondly, if you flashed your ROM then make sure you remove the previous Device Partnership in your Activesync settings and make a NEW PARTNERSHIP.
Hope this helps!
i have the same problem i connect my phonr to my pc but it wont establisch a activesync connection
I have also the same problem.
When i connect mij Diamond richt below on mij PC sreen see I the message PC can't reconize mij Diamond (tested on more PC's with differnt cables).
If had someone the solution please mail me !
- Diamond with Hard-SPL Olinex 1.93 and the Dutch ROM v2.03.
hi,
i think my diamond has a hardware problem...because it ask me if i want to use activesync or storage when i plug the charger....