Develop Bugs

[WM5] Camera contact photo

Hi there
I know this has been posted before, but can't seem to find it..
Which registry key do I have to change to make an extra mode available in the camera, for the contact's photo?
Tks

d3vil said:
Hi there
I know this has been posted before, but can't seem to find it..
Which registry key do I have to change to make an extra mode available in the camera, for the contact's photo?
Tks
Click to expand...
Click to collapse
Same as wm2003
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\AppDefSettings\P4]
"Enable" Set to 1 to enable and 0 to disable.
See also:
http://wiki.xda-developers.com/index.php?pagename=BA_Hacks_WM5
And
http://wiki.xda-developers.com/index.php?pagename=BA_Hacks

thx :wink:

hi sorry to be a pain bout how do you edit the registry

mrcopyright said:
hi sorry to be a pain bout how do you edit the registry
Click to expand...
Click to collapse
Did a Search?
http://forum.xda-developers.com/viewtopic.php?p=162777#162777

Screen Goin off during a call

I was looking through the forum the other day and i found this, it is a way to keep the screen on during a call for the kaiser:
-Screen Going Off Durning a Call Bother You?
If you would like it to never go of during a call then edit this registry key
\HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplay DuringCall
From "1" to "0"
Click to expand...
Click to collapse
I have looked fr the mentioned registry entry int he hermes and i cannot find it, but there must be an equivalent somewhere.
Does anyone know of how to do this?
Thanks

Have you tried to create that key?

JR_de said:
Have you tried to create that key?
Click to expand...
Click to collapse
no i didnt think to try, can you just do that?
i have just tryed, im not sure if i did it correctly but it didnt do anything (i think i did it wrong!!)
can anyone help?

Hermes dialer display issue

Recently loaded HTC Black dialer cab to my TyTn. Running it on WM6. When I dial telephone numbers they display in green against the black background. They should display as white numbers. Any ideas, I have tried to re-load the cab, hard-boot and re-loaded WM6 rom?

paulmo said:
Recently loaded HTC Black dialer cab to my TyTn. Running it on WM6. When I dial telephone numbers they display in green against the black background. They should display as white numbers. Any ideas, I have tried to re-load the cab, hard-boot and re-loaded WM6 rom?
Click to expand...
Click to collapse
Hello Paulmo! You have to edit
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\DIALER\landscape\text] key
textColor value have to be FFFFFF (HEX value) - text will be WHITE
AND also
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\DIALER\portrait\text] key
textColor value have to be FFFFFF (HEX value) - text will be WHITE
It would be better to remember previous value of this keys to have chance to roll back. After that you must soft reboot you TyTN & everything will be Ok.
Hope, it will help you to fix your issue - good luck.
P.S.: if you are not sure how to do this - it will be better to keep everything as is.

M any thanks for coming back so soon. I am confident if I know where to look. Could you point me in the right direction and I will have a look.

paulmo said:
M any thanks for coming back so soon. I am confident if I know where to look. Could you point me in the right direction and I will have a look.
Click to expand...
Click to collapse
You are welcome. Do you have some application installed on your mobile device for edition windows mobile registry? For example - http://www.google.com/search?hl=en&q=mobile+registry&safe=active
You have to have some of them to change your windows mobile registry.

Hi xda4yk,
Tried those changes to no avail. Thanks anyway.

paulmo said:
Hi xda4yk,
Tried those changes to no avail. Thanks anyway.
Click to expand...
Click to collapse
I really want to help you. It's seems to me that you did something wrong. Did you find mentioned keys above in you registry? Let me check on my own mobile device...

paulmo said:
Hi xda4yk,
Tried those changes to no avail. Thanks anyway.
Click to expand...
Click to collapse
Everybody who will read this thread - it was my fault, sorry I have check my registry - key have to be
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\DIALER\landscape\text] AND
[HKEY_LOCAL_MACHINE\Security\Phone\Skin\DIALER\portrait\text]
Paulmo, pls, check one more time - sorry for my mistake It was tested on my mobile device (don't forget soft reset your device)
P.S.: error has been corrected in my first post also.

Made those changes. Values in landscape and portrait are now 0. Numbers are now appearing Black. Nearly there.

paulmo said:
Made those changes. Values in landscape and portrait are now 0. Numbers are now appearing Black. Nearly there.
Click to expand...
Click to collapse
Paulmo, I wrote to you that value must be FFFFFF (HEX)

Hi xda4yk, when I put in FFFFFF, it re-set as 0

paulmo said:
Hi xda4yk, when I put in FFFFFF, it re-set as 0
Click to expand...
Click to collapse
I ahve checked on my mobile device:
1. made changes in value (HEX) FFFFFF or (DEC) 16777215;
2. close appl for registry edition;
3. soft-reset device
I'm sure it works.

Hi. Put in the DEC value. Worked great. Can now see what I am dialing. Thanks for your input and patience.

paulmo said:
Hi xda4yk, when I put in FFFFFF, it re-set as 0
Click to expand...
Click to collapse
P.S.: to close appl for registry edition, pls, use Settings\System\Memory\Runnig Programs -> Stop all. Then wait a little bit & soft reset device.

paulmo said:
Hi. Put in the DEC value. Worked great. Can now see what I am dialing. Thanks for your input and patience.
Click to expand...
Click to collapse
I'm glad to help you, take care yourself

Customizing title on the s620 (CClock)

Hi !
I am trying to costumize my title in the Cclock part of the home menu on my phone (The one that shows you the time and has the network title; in my case it's "Rogers Wireless")
I am trying to find out how i can change the "Rogers Wireless" for something else i want.
Anyone knows where i can go into my phone to accomplish that ?

Cyberflow said:
Hi !
I am trying to costumize my title in the Cclock part of the home menu on my phone (The one that shows you the time and has the network title; in my case it's "Rogers Wireless")
I am trying to find out how i can change the "Rogers Wireless" for something else i want.
Anyone knows where i can go into my phone to accomplish that ?
Click to expand...
Click to collapse
You should be able to change the text at this reg location:
HKLM\System\State\Phone\Current Operator Name
I'm not sure it will stick for any amount of time, as it gets updated by the carrier. I use mortscript to write data(text) to it for viewing in my FeatherWeather app.

Hey thanx Showaco !
Where can i get mortscript ?
And how could i set it up to update the name i usually want ?

Here is MortScript.
Show can help you on the second question

Oké ...
I tryed to make a script and here's a small little template of what i've cooked =)
Code:
contrun=1
while(contrun=1)
RegWriteString( "HKLM","System\State\Phone","Current Operator Name","Cyberflow")
Sleep (5000)
EndWhile
exit
I guess that the "Sleep (5000)" will make it run at all the 5000 milliseconds ?
Is it proprely coded ?
Hope that my questions will help others too =)

Cyberflow said:
Oké ...
I tryed to make a script and here's a small little template of what i've cooked =)
Code:
contrun=1
while(contrun=1)
RegWriteString( "HKLM","System\State\Phone","Current Operator Name","Cyberflow")
Sleep (5000)
EndWhile
exit
I guess that the "Sleep (5000)" will make it run at all the 5000 milliseconds ?
Is it proprely coded ?
Hope that my questions will help others too =)
Click to expand...
Click to collapse
yep, should work fine, the sleep 5000 will make it wait the 5000 milliseconds( 5 seconds) and then rewrite the "Cyberflow" again. Just place a lnk into startup folder for it to run when you reboot your device.

change unlock key from * to space bar

i was wondering how to change the unlock * key , for example to space bar, cause *key is not working so well, which's the registry i have to change to do that??
thanx

i dont think you would have to go into registry at all.
start
settings
security
device lock
make your password "spacebar"
simple

yeah , know that but im talking about to change the * key to space bar but for unlock keaboard, thas it, not to unlock the phone.
thanx anyway

I believe he means, instead of pressing the left menu button followed by the * key, he wants it to be left menu then the [Space] button.

yes , thats it, i can't explain very well in english, but at least someone understood me, thanx

Thats exactly what I was hoping for too! that "*" key is so dang small for my big fingers that the space bar would totally be easier!

SRgustavo said:
yes , thats it, i can't explain very well in english, but at least someone understood me, thanx
Click to expand...
Click to collapse
Haha, no problem.
You'll get an answer eventually, once someone with a decent registry knowledge drops by.

phuKKah said:
Haha, no problem.
You'll get an answer eventually, once someone with a decent registry knowledge drops by.
Click to expand...
Click to collapse
ok , i'll wait, thanx