Related
Here it is.. Sim Toolkit For WM5 from universal...
I install it and softreset after that... It created automatically an icon in Programs folder and after launching it, it gave me a list of services on my SIM but when I click on any of them nothing happens... Any ideas...?
VavrinaL said:
I install it and softreset after that... It created automatically an icon in Programs folder and after launching it, it gave me a list of services on my SIM but when I click on any of them nothing happens... Any ideas...?
Click to expand...
Click to collapse
Mine works but only at second time, i haven't installed the service (on the .reg)
Can someone confirm if it works in XDA II with WM5?
Thanks
sorry
i' tried this after wm2005 patched version 2 with al other aviable patches(5),
still it is not working, i still cannot use my full toolkit,
Are there any different settings to try? the dll file was not in my windows dir, tried several ways only with the dll and both, but when copied both after resetting opening the manager it hang.
any suggestions? or tricks i can try?
Re: sorry
pimbo said:
i' tried this after wm2005 patched version 2 with al other aviable patches(5),
still it is not working, i still cannot use my full toolkit,
Are there any different settings to try? the dll file was not in my windows dir, tried several ways only with the dll and both, but when copied both after resetting opening the manager it hang.
any suggestions? or tricks i can try?
Click to expand...
Click to collapse
Try without using the .reg, on my device it works, but at the first time the icon disapears, but reapears when you close the programs and open again, and at second try it works...
You can also try running the stk.exe directly
Re: sorry
ncruz said:
pimbo said:
i' tried this after wm2005 patched version 2 with al other aviable patches(5),
still it is not working, i still cannot use my full toolkit,
Click to expand...
Click to collapse
Try without using the .reg, on my device it works, but at the first time the icon disapears, but reapears when you close the programs and open again, and at second try it works...
You can also try running the stk.exe directly
Click to expand...
Click to collapse
stk.exe Tried it but still not working good, when i click on it the toolkit opens,
But when i want to do something like entertianment or ringtones, the toolkit freezes,(can closed by [x] button)
have to make a reboot to choose another "theme" but the same problem.
tkitapp.exe is not working at all. (i know another problem 8))
I haven't had a need for the STK before, but suddenly I have. Hate to ask, but where do I put these files? In the Windows directory?
Hi, I have installed this STK.exe (Dual SIM), it worked on my drive with WN5, just send this .exe file into your phone, then click it, select the SIM card, and then soft reset, you phone will be switched to other SIM.
Hello ppl,
I have upgrading my PDA2k to WM5 but now I'd like to downgrade to WM2003.
I followed the instructions by doing.
reset,
pressing record and camera,
make 2nd and 3rd option YES,
press messages,
setup the device,
doing a power+camera+reset
it went to Serial/USB screen.
I run the Maupgrade but when I click next to "check the device" it shows no versions, and when I click next it cannot upgrade.
when I click on reset and try to run the maupgrade while the operating system is running it shows the version that I want to install but when I click on next it cannot upgrade.
any ideas?
thanks.
MegaHz said:
Hello ppl,
I have upgrading my PDA2k to WM5 but now I'd like to downgrade to WM2003.
I followed the instructions by doing.
reset,
pressing record and camera,
make 2nd and 3rd option YES,
press messages,
setup the device,
doing a power+camera+reset
it went to Serial/USB screen.
I run the Maupgrade but when I click next to "check the device" it shows no versions, and when I click next it cannot upgrade.
when I click on reset and try to run the maupgrade while the operating system is running it shows the version that I want to install but when I click on next it cannot upgrade.
any ideas?
thanks.
Click to expand...
Click to collapse
Follow this:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
I did that step by step.
I told you what is the problem man, when it goes to the serial/usb screen it does not recognise the version
I am waiting for it to check a lot of time and then it shows that it cannot upgrade.
if I run Maupgrade while it is booted it shows the versions but cannot upgrade
MegaHz said:
I did that step by step.
I told you what is the problem man, when it goes to the serial/usb screen it does not recognise the version
I am waiting for it to check a lot of time and then it shows that it cannot upgrade.
if I run Maupgrade while it is booted it shows the versions but cannot upgrade
Click to expand...
Click to collapse
If you get the error the first time with MaUpgrade_Ut then without removing the BA from the cradle, run MaUpgrade_Ut again..
I tried that also.
nothing happens
any other idea?
MegaHz said:
I tried that also.
nothing happens
any other idea?
Click to expand...
Click to collapse
What Error are you getting.. No one will be able to help without knowing what the Error is..
I am getting Connection error.
MegaHz said:
I am getting Connection error.
Click to expand...
Click to collapse
Then you need to run MAUpgrade_Ut twice.. As seen in Wiki..
Wiki said:
However, if you are installing a rom on a device other than that which it is meant for, you will get a Device ID error, so follow these steps:
First Method (Quick/Easy) (TYPE II)
Download update to desktop
Unrar or unzip all files in exe or rar into a new folder
Open the folder with the extracted files
Download this file: MaUpgradeUt_noID.ZIP
Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
Run this new exe file instead of BaUpgradeUt.exe to update your rom
If you get an error the first time, run MaUpgradeUt_noID.exe again without touching your device (don't take it out from the cradle, don't reset it, don't touch it at all!)
Click to expand...
Click to collapse
Cheers!
I run it more than 10 times.
MegaHz said:
I run it more than 10 times.
Click to expand...
Click to collapse
Then I'm sorry but I can't help any more.. Can you take a screen shot of the error message on your PC Screen so I can see what it says..?
MegaHz said:
I run the Maupgrade but ....
Click to expand...
Click to collapse
Maupgrade? I was using BaUpgrade or MaUpgrade_noid
MegaHz said:
I tried that also.
nothing happens
any other idea?
Click to expand...
Click to collapse
I've got the same problem.
Try this:
Remove PDA form craddle
Uninstall ActivSync 4.x
reboot PC
Remove [or rename] directory C:\Program Files\Microsoft ActiveSync
Remove [or rename] directory C:\Documents and Settings\UserName\ApplicationData\Microsoft\ActiveSync
Install ActiveSync 3.x [you can find this version on your original CD]
reboot PC
Don't synchronize, don't pair [!!!]
Kill winword.exe, outlook.exe etc
Don't kill rapimgr, wcescomm, etc
Start bootloader [power+record+reset]
put PDA into the craddle [now should display "USB" instead of "Serial"]
start MaUpgrade_noID or BaUpgrade [probably it wil not recognize software versions, but don't worry]
Good luck
give feedback if it's working, pls
i run the procedure exactly as you instruct me.
and at the point where it starts upgrading it finishes after 2 seconds with message: Successful upgrade.
Do you have NBF files in the directory, where BaUpgrade or MaUpgrade_noID is dtored? For example - nk.nbf
It looks, that BaUpgrad [or MaUpgrade_noID] can connect now and is ready to downgrade, but there is nothing to downgrade.
yes I have the files.
let me explain again the problem.
with activesync 3.0 it happens the above problem
and at the point where it starts upgrading it finishes after 2 seconds with message: Successful upgrade.
Click to expand...
Click to collapse
with activesync 3.8 it does not even connect
or maupgrade stays and checks for versions forever.
re leventes,
anybody has any idea?
These all files need to downgrade from WM5 to 2003 SE on BA.
Put all these files into one folder.
1. MaUpgradeUt_noID.exe
2. RUU.conf
3. RUU.dll
4. nk.nbf <---------- The most important file, because this file is ROM. When you run MaUpgrade, it will search what ROM do you have. In you're case maybe you don't have this file. That's why there's nothing show in version ROM....
baniaczek said:
MegaHz said:
I run the Maupgrade but ....
Click to expand...
Click to collapse
Maupgrade? I was using BaUpgrade or MaUpgrade_noid
Click to expand...
Click to collapse
Again: Maupgrade? I was using BaUpgrade or MaUpgrade_noid
all those files are in place
and I am using MaUpgradeUt_noID.exe
any other ideas?
MegaHz said:
all those files are in place
and I am using MaUpgradeUt_noID.exe
any other ideas?
Click to expand...
Click to collapse
Nothing more. Sorry.
I saw this problem while downgrage my IIs and I did the following:
First you need: MS ActiveSync 4.1 installed on your Desktop PC (If yes, the first time you see "Connection error" you need to restart you destop PC before downgrage). Connect your device let ActiveSync conected and..
1. Press Power + Soft Reset button
2. Fast press both Camera + Record at the same time before
3. The Record button to move down and the Camera button to change status. You should set 2nd & 3rd option to Yes ( It's boot with format Registry & Storage on your PPC). You will see the white screen for a few minute and next the color stripe. It means you device is booting
4. Press all Power + Soft Reset + Record + Camera at a time( It's not easy . The screen will display Serial & version ready to up/downgrage
5. Run MaUpgrageNo_ID (should put in the same folder with nk.nbf, ms_.nbf &...) This tool will skip some error for up/downgrage, you may try more time if first time see error.
I did that and succeeded but can anyone tell me why my device can't receive Delivery Report? I'm sure that my current ROM version have it (I used this for a time). Please help me!
when I try to flashing any ROM. it will show dialog box said
"the program is from an unknow publisher. running it can possibly harm the device. Do you want to continue?
Name : enterbootloader.exe
Location: /windows
yes/ no"
when i select yes it will show a blank dark page and in ROM update utilities will show Error 202 Connection / check connection
how can I solve this. thanks
Hard SPL?
iDaemon said:
when I try to flashing any ROM. it will show dialog box said
"the program is from an unknow publisher. running it can possibly harm the device. Do you want to continue?
Name : enterbootloader.exe
Location: /windows
yes/ no"
when i select yes it will show a blank dark page and in ROM update utilities will show Error 202 Connection / check connection
how can I solve this. thanks
Click to expand...
Click to collapse
Have you installed Hard SPL?
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
iDaemon said:
when I try to flashing any ROM. it will show dialog box said
"the program is from an unknow publisher. running it can possibly harm the device. Do you want to continue?
Name : enterbootloader.exe
Location: /windows
yes/ no"
when i select yes it will show a blank dark page and in ROM update utilities will show Error 202 Connection / check connection
how can I solve this. thanks
Click to expand...
Click to collapse
As tnyynt said, install hard-spl!
If you already have hard-spl, try to update with manual bootloader mode (reset+camera+turn on button in the same time), and not with the sspl started by RUU
yes this is apprear when i try to install hard-spl
plz suggest me
i use p3600i
tnyynt said:
Have you installed Hard SPL?
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
Click to expand...
Click to collapse
sorry i delete other
Hi good day
Could you help or teach my P3600i unlock ,I want to modify my rom to MARY 3.41 ,thank you very much
I use P3600i too
thanks
when i close my antivirus program
that warning to confirm to run program is not show but it still stop connection with dark screen and rom upgrading will fail. any suggestion?
iDaemon said:
when i close my antivirus program
that warning to confirm to run program is not show but it still stop connection with dark screen and rom upgrading will fail. any suggestion?
Click to expand...
Click to collapse
Try flashing to Hard SPL from another machine and then you can flash your ROM from SD card
i don't believe the p3600i is flashable yet...
racerx_ said:
i don't believe the p3600i is flashable yet...
Click to expand...
Click to collapse
I got confirm from Karmba_a that we can flashing 3600i
tnyynt said:
Try flashing to Hard SPL from another machine and then you can flash your ROM from SD card
Click to expand...
Click to collapse
I have try flashing ROM with another machine but it still the same when starting flash it was show blank dark page and red LED will show
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
I also have a 4GB SDHC card and I have tried with and without it and I still have the same issue.
Cheers,
theorthodontist said:
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
Cheers,
Click to expand...
Click to collapse
Hi m8
i hate the same probleme 1 week looking for a solution
Artemis Touch 4.02 Full with 4 sided cube <--- i have this rom right know.... there are 2 files on it on file
STEP 1 - activesync then uspl cid unlocking
whene its finisch
STEP 2 - activesync then flash artemis touch rom
it works for me
let me know if it work for you
one thing when you have done step 1 you doesn't have take this rom you can take every rom you like
Hi Dookus,
I did actually try the USPL first and when it finishes the activesync green icon goes inactive and my phones screen is blank, so I do soft reset then when the activesync is green I do try to flash the new rom, but that's when it keeps on giving me error.
Could you give me the links to your USPL and Rom please
Thanks again,
hmmm
http://www.4shared.com/file/45478590...ified=c2945a00
this is the 1 i use you may remove you mem card
alternatively flash via sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
p.s. i only flash that way, better even reflash a new rom twice! - i even do so with radio rom!
greetz
thormdac said:
alternatively flash via sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
p.s. i only flash that way, better even reflash a new rom twice! - i even do so with radio rom!
greetz
Click to expand...
Click to collapse
I checked that one out, but it's saying at the bottom that SDHC cards are not supported and this is what I have actually, I even tried the whole process after removing the SDHC card from my phone, but I still got the same error (270) corrupt image file
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
thormdac said:
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
Click to expand...
Click to collapse
I have another computer and it's Vista, I hope it'll work with it, I'll let you know
Thanks
thormdac said:
...even if it might sound funny at this point, but use another computer and see if you have another usb cable as well...
greetz
Click to expand...
Click to collapse
SAME PROBLEM, I tried it on the other computer and it gave me exactly the same error
theorthodontist said:
Hi Dookus,
I did actually try the USPL first and when it finishes the activesync green icon goes inactive and my phones screen is blank, so I do soft reset then when the activesync is green I do try to flash the new rom, but that's when it keeps on giving me error.
Could you give me the links to your USPL and Rom please
Thanks again,
Click to expand...
Click to collapse
When your screen went blank, was that after the DOS screen finished? If so, USPL is not finished yet. RUU should automatically start and you flash the USPL (don't need activesync connected here but don't remove USB cable). Then your phone should automatically restart. Once restarted, activesync will re-establish and now you flash the new ROM.
yvrRome said:
When your screen went blank, was that after the DOS screen finished? If so, USPL is not finished yet. RUU should automatically start and you flash the USPL (don't need activesync connected here but don't remove USB cable). Then your phone should automatically restart. Once restarted, activesync will re-establish and now you flash the new ROM.
Click to expand...
Click to collapse
Yes the screen goes blank while the USPL is working then after it reaches 100% the RUU kicks in but my screen is still blank and the activesync is grey and when I continue with it it tells that there's a connection problem.
I really appreciate your help but still can't seem to figure it out, does having a, SFHC has any effect on that ??
theorthodontist said:
Yes the screen goes blank while the USPL is working then after it reaches 100% the RUU kicks in but my screen is still blank and the activesync is grey and when I continue with it it tells that there's a connection problem.
I really appreciate your help but still can't seem to figure it out, does having a, SFHC has any effect on that ??
Click to expand...
Click to collapse
Yes, you should remove your SDHC card when updating. Start again with USPL but make sure your card has been removed. When RUU kicks in after DOS window shows 100%, my screen is blank too with Activesync disconnected, just continue with RUU to flash the new USPL.
After it reboots, run the RUU for the new WM6.1 ROM.
There's pdf instructions in the USPL thread if you're still having problems.
theorthodontist said:
Hi friends,
I recently purchased an unlocked HTC Artemis P3300 which has WM6 on it, I tried to flash WM6.1 but in vain, I tried the USPL and everytime it reaches the step where it's updating the image it gives me an error 270 file corrupt.
And I have tried to install Manila 2 TouchFlo on my WM6, but it seems to run out of RAM and the whole phone becomes very slow, if anyone has an idea about this, I'd be more than grateful.
I also have a 4GB SDHC card and I have tried with and without it and I still have the same issue.
Cheers,
Click to expand...
Click to collapse
CID Unlock is the first to do....
And NO SDHC card in during flashing....
TPA said:
CID Unlock is the first to do....
And NO SDHC card in during flashing....
Click to expand...
Click to collapse
Thanks guys, I managed to flash ROMs on my Artemis, thank you for your help,
Salut
Thanks to gruptnt over at this thread: http://forum.xda-developers.com/showthread.php?t=490681
WLAN IS NOW FIXED!!!!!! Flash without worry anymore.
my wifi work great again
That is perfect solution !!!
thank !!!
complimenti....
penso proprio che questo tread sia
sticky
eng: sticky for ever
binht611 said:
my wifi work great again
That is perfect solution !!!
thank !!!
Click to expand...
Click to collapse
I also have the same problem... i visit the above post but the post is very big... can you please tell me what steps you follow....
Thank you.... i also have trinity and after this error my trinity hangs frequently.....
These two posts should help:
http://forum.xda-developers.com/showpost.php?p=5313622&postcount=340
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345
WLAN IS NOW FIXED!!!!!! Flash without worry anymore.[/QUOTE]
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95
vito95 said:
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95
Click to expand...
Click to collapse
Have you tried to flash another ROM to the phone and see if that gets it going again?
First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...
kabtv said:
First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...
Click to expand...
Click to collapse
yes, confirmed, you must XP
SuperSport said:
Have you tried to flash another ROM to the phone and see if that gets it going again?
Click to expand...
Click to collapse
Hi, after some hours the phone is restarted.
Now the only problem is that in comm manger application, Wlan dont work.
remain in off state (red botton).
can you help me?
regards
narshorn said:
yes, confirmed, you must XP
Click to expand...
Click to collapse
Please see this update.
Now, you can run MTTY in Windows Vista and Windows 7. I've made a Video Tutorial Showing how. It's Step 2b on this page:
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345
my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen
kabtv said:
my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen
Click to expand...
Click to collapse
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
I don't believe this will work on 64bit Windows. I tried and stopped after a couple failures.
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Looking at the Video again this morning, it does appear to go sort of fast. Hit Pause when needed to read the text pop-ups.
Next thing is I believe you may be selecting the wrong option when you browse for the driver. Be sure you are selecting the option: "Let me pick from a list of device drivers on my computer". If you get a warning that the driver is not the correct driver, BUT you have the option to go ahead with the installation, go ahead and install it. It's a Windows XP Driver, so Win7 will not suggest installing it. But when it's all over, you will be removing it again and reinstalling the Win7 Driver.
SuperSport said:
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
Click to expand...
Click to collapse
That was it...i succeed to install the driver and WIFi works again
SuperSport said:
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Click to expand...
Click to collapse
don't be, you do so much for the community here
Thanks again...
kabtv said:
That was it...i succeed to install the driver and WIFi works again
don't be, you do so much for the community here
Thanks again...
Click to expand...
Click to collapse
That was FAST , good work! Happy to hear it worked for you.
Also, be sure to delete the XP driver from Device Manager, and re-scan the system to install the original driver. And then, re-activate your USB Connection in WMDC.
kabtv said:
my god, you worked late yesterday on this...
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the 3G Asia splash screen
Click to expand...
Click to collapse
did you experience that...?
kabtv said:
did you experience that...?
Click to expand...
Click to collapse
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.
SuperSport said:
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.
Click to expand...
Click to collapse
i used the sd card method...
kabtv said:
i used the sd card method...
Click to expand...
Click to collapse
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.
SuperSport said:
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.
Click to expand...
Click to collapse
Hi,
I have moved to hd, so I didn't come to this forum since then...
I will try to explain a little better the HSPL and official roms.
First, there are several HSPL for trinity. The best one is olipro 1.30, so this th eone we want to get into the trinity.
First the theory, in a .nbh file we have several parts: ipl,radio,spl,splash,os,extrom In an official rom contains all parts, a custom ROM normaly nowdays contains os only. Whith older kitchens contains splash+os
The HSPL of olipro is protected so it is not overwrited by the roms. So it is safer, and you can't get a brick if you don't flash the ipl part.
The SPL is the tricolor program, so when flashing you should view the spl that you have in the trinity.
Whith the customruu of the trinity there is a file called enterbootloader.exe which is transmited to the pda and executed to display the spl. This file is SSPL_TRIN.exe renamed.
Ok, so this are the scenarios:
1) you launch the romupdate whith as/wmdc connected:
Enterbootloader is transmited and executed -> Special SPL 1.07
So when flashing you will flash every part of the nbh (all for oficial, os for custom)
2) you enter manually in boot loader
The SPL in your device -> olipro 1.30
So when flashing you will flash only (ipl,splash,os,ext)
The safer method is to put manually the bootloader mode and flash. You can have the HSPL whith an offical ROM whithout worries. Though there is an exception: you want to update the radio.
If you want to update the radio use method one so you run the other SPL.